I connect my Lg G5 H850 to PC, open a cmd prompt and I can find it in the adb devices list. But if I try the command: "adb reboot bootloader", it reboot but not in recovery mode. If I try manul recovery mode ( push Vol DN and Power ) it doesn't work too.
What can I try ? Can you help me ?
Thanks
Power down, hold VOL DN and connect LG G5 to the PC ( fastboot start automatically ).
I believe that by default the LG g5 does not have a recovery the closest to that is the method you describe: shut down, turn on with volume down and power button, when you see the LG logo you let go the power button for a second then you press it again (you don't let go the volume down button In any moment) then you see a white screen with some text that asks if you want to wipe the phone, you have to select the "yes" option twice and it will wipe the phone, if you have a custom recovery installed (twrp) it will boot into twrp if not it will only wipe the phone
Related
Its like Cricket somehow removed fastboot from the device. What can I do. Im not even using it on cricket. I want to put cyanogenmod on it or something non alcatel / non cricket.
Method1-Works for every device
Turn on USB Debugging and Connect your phone to pc.
In adb , type
Code:
adb reboot bootloader
Method2-If above method fails
Turn off your phone.
Press Both Vol keys and Power Button together.Keep pressing until you enter boot benu(Black Screen)
If phone boots normally , try something else.
Volume Up+Power
Volume Down+Power
Volume Up+Home+Power
Volume Down+Home+Power
Cheers
Hello, Gents.
My fat fingers inadvertently ticked a package in BK package disabler which led to the device freezing instantaneously (yes, I know, I suck). it was a system package which I failed to write down. anyway, the volume down+ power button trick does not work for me since I can't turn the device off - I go through the screens where the V30+ model page shows up then the LG logo follows; releasing the power button and pressing it after 2 seconds just restarts the process.
can anyone help me with the adb command to entry the dialog screen for the data wipe?
adb reboot recovery just gives me the robot with a message "no command" at the bottom.
adb recovery --wipe_data does thing.
TIA.
Hold down power and vol down for 8 seconds, phone will shut down and then reboot
release both buttons as soon as the screen goes off
after half a second hold both again
as soon as the lg v30 logo appears, release the power button and then hold it again (while doing this continue to hold the vol down button)
you need to get the timing right, but that will boot the v30 (you can also check videos on youtube for the g6 for example) into the factory reset screen, which will boot recovery (if you select twice yes) and perform a factory reset
Hi. I have an LG Stylo 3 Plus (32GB) on Telus, with a locked bootloader and no root.
I am trying to enter recovery mode to clear all the caches, however doing
Code:
adb reboot recovery
just takes me to the screen that says "no command" and has the android on its back.
What key combination do I use to enter recovery? I have tried volume down when plugging in a USB cable, however that just brought up fastboot for unlocking the bootloader.
after you flash a new recovery, take the battery off, an right away press the volume down + power button until you see logo. When you see the logo, just take your finger off the power button and press it again
Joining so that I can post this, as it took me HOURS to sort it out. Hopefully this helps others!
Needed:
Laptop or PC with Windows (that is where it worked for me, but should work on other OSes)
fastboot app from the Platform Tools for Android (developer.android.com/studio/releases/platform-tools.html)
USB cable to connect the computer to the phone and run fastboot commands on it
First, you must boot the phone into FASTBOOT mode:
Turn off the phone
Press: ON and VOLUME DOWN buttons together for a few seconds
Release the buttons when your phone shows a mostly black screen with "FASTBOOT" at the bottom-left corner
Next, connect the phone to the computer and use the fastboot app to reboot it into recovery mode (green robot with open chest):
Open a command window and go to the folder where you downloaded and extracted the Platform Tools for Android (download link above)
While the phone is in FASTBOOT mode, connect the device via USB (you should hear the Windows chime when connected)
Test connectivity with: fastboot getvar version
Reboot the phone into recovery mode with: fastboot reboot recovery
Finally, go into the recovery menu and run the factory reset:
After the phone has booted into recovery mode it will show the green android robot with the open chest but will not show a menu
To see the recovery menu, press a *SHORT/QUICK* button combination: POWER + VOLUME UP
You should see the recovery menu now, listing many options (YAY!!)
Press VOLUME DOWN to select "Wipe data/factory reset"
Press POWER to select and accept the factory reset
When that has completed, reboot the phone (press POWER which selects 1st option for "Reboot now")
genius! thank you. minimal fastboot not work, those platform tools are required
Brilliant! Worked a treat.
Thanks
after trying to downgrade from pie to oreo, with my korean version, i got stack on the logo screen,even after rebooting it gets stack there someone help
somene?anyone? @ChazzMatt please help us. stuck on LG V30ThinQ screen
To enter recovery:
1. Turn off the phone by holding down the power button for several seconds.
2. Hold down the Volume Down and power buttons simultaneously.
3. When the LG logo appears, release the power button and then press and hold it again.
4. Continue holding both buttons until the "Factory data reset" menu appears.
5. Choose Yes twice. With TWRP installed, it will enter that rather than perform a factory reset.
To enter download mode:
1. Connect a USB cable to your computer.
2. Turn off the phone by holding down the power button for several seconds.
3. Hold down the Volume Up button.
4. While still holding it down, plug in the other end of the USB cable.
You can now run patched LGUP and flash a KDZ. Note that, when you do, you can select only some parts, like the modem.