Related
Hi guys,
Has anyone ever thought of connecting a slim USB powered external DVD re-writer disc drive to the Samsung Galaxy S2. I am still awaiting my Galaxy S2 to be delivered and from what I have gathered in order for this type of usb hardware to be recognized in the OTG, there would need to be support for the CDFS and UDF filesystems which many burned CD's and DVD's are recorded in. It's a 2.5" usb powered DVD re-writer (no external power needed) I attach and use sometimes on my win 7 laptop.
Would be awesome if I could view many of my old backed up DVD rips (standard 700mb XviD's) that I burned to CD through the USB OTG on my Galaxy S2 using an Android video p[layer like Rockplayer or moboplayer. Does anyone agree?
many other possibilities with burned CD and DVD media such as photo CD's, traditional music CD's (cda) and more all on Android. Optical disc drives, like other usb drives tested on Galaxy S2, may likely require separate power source.
I've even written to Samsung's UK headquarters about it and they said they will forward the request onto the relevant department. I know USB OTG function on Android is still in it's infancy.
I have breezed a look at these two favourite XDA topics relating this issue:
http://forum.xda-developers.com/showthread.php?t=1070573
and
http://forum.xda-developers.com/showthread.php?t=1090961
Also outside of these forums, I have also looked at these topics:
http://forum.dailymobile.se/index.php?topic=39360
and
http://forum2.mobile-review.com/sho...st-for-a-Galaxy-SII-sucessor-(aka-Galaxy-SIII)
Any response?
i kinda doubt itll work due to the power requirements of the drive
i know that you cant connect up a 2.5" harddrive cos they suck down more power than it can output.
hell even a 256gb thumb drive ive got didnt work
Another related topic about this, this below link:
RISC OS Open: Forum: When should we have a new BeagleBoard ROM image?
Has anyone on this forum with knowledge on these disc file-systems made any investigations as to whethere it could be supported on the Galaxy SII? Maybe on a custom ROM maybe?
Please anyone share something of what you knows
Related topic:
http://forum.xda-developers.com/showthread.php?t=1844395
http://forum.xda-developers.com/showthread.php?t=1091210
OR:
http://www.youtube.com/watch?v=3dKvwom5K8s
BennyT83 said:
i kinda doubt itll work due to the power requirements of the drive
i know that you cant connect up a 2.5" harddrive cos they suck down more power than it can output.
hell even a 256gb thumb drive ive got didnt work
Click to expand...
Click to collapse
Power is not a problem. It works fine. All you need is a separate USB hub with its own power adapter.
You connect your USB hard drive or anything else to a hub and connect your hub to your Android device
by USB OTG cable.
You should also have a program which can read for instance NTFS file system for your Android like
USB OTG Helper or Paragon NTSF&HFS+
The problem is that there is still no similar programs for Android which could read CDFS or UDF
I think i saw that option on stweak on dorimanx kernel
Sent from my GT-I9100 using XDA Premium 4 mobile app
Could you please write any updates about this? I want to buy external dvd-rw but I'm not sure in success.. Is it possible to burn disks? How it can be done?
It is my understanding that android natively supports usb. My question is, if I get a micro usb to usb adapter, and then plug in a usb keyboard, I would be able to use the keyboard to type documents. Any thoughts?
(I have a rooted nook, but I got the update before I could block them, will revert back soon)
currently no. The android or in this case nook skinned android kernel has to support usb host and usb keyboard inputs which it doesn't. But it probably will in the future when the devs release android 4.0, because ICS needs a different kernel then the current nook tablet kernel. But anyway what keyboard do you have, because you can only connect bluetooth keyboards and also only if the developers can enable bluetooth on the nook.
It also depends on the hardware support. I don't know if the TI chip has a host-only port, or if it supports OTG (On-The-Go) dual mode operation. It probably does, but I've not seen anybody verify that.
it doesn't support USB keyboards. I have a female USB to micro USB for my galaxy S2. I tried to get a USB sick and 2.4GHz mouse and keyboard on the nook but nothing worked, and yes it both works on my galaxy with the stock ROM
Sent from my SGH-T989 using Tapatalk
The NT can support usb gadgets and usb hubs but it need to be enabled in the rom and the must have the module, the NC has this feature and i hope our great devs can implement this on the NT.
Sent from my BNTV250 using xda premium
im looking to use a usb 3g modem myself with my tablet ,
ive read a bit on the latest engadget article about the other older e paper nook that was done with a usb keyboard i even went as far as to contact the guy who did it and he told me what to look for , hardware wise to see if the NT could do it ,
yet without kernel support or the module being compiled into the kernel we have already on the tablet , theres not much hope , but i believe it can and will be done , if not im gonna have to get an ipad with a 3g data card in it cause i have to have data access wifi hotspots just not cutting it..
Hello everybody,
I know that the scene is working really hard making and porting ROMS for the NT, now that CM7 (ALPHA) is out... I'm curious if is a CHANCE or light in the future to use a micro USB/HDMI output to be able to connect the tablet to a HD TV using MHL.
PS: Is the CM7 KERNEL capable of mounting or recognize keyboards, gamepads etc etc with micro USB port.
apavoratiago said:
Hello everybody,
I know that the scene is working really hard making and porting ROMS for the NT, now that CM7 (ALPHA) is out... I'm curious if is a CHANCE or light in the future to use a micro USB/HDMI output to be able to connect the tablet to a HD TV using MHL.
PS: Is the CM7 KERNEL capable of mounting or recognize keyboards, gamepads etc etc with micro USB port.
Click to expand...
Click to collapse
I'm pretty sure that video output would require some hardware support, soas far as I know that won't be possible.
I don't know about using the USB for external devices, but if they ever figure out the "magic number" it should be possible via Bluetooth.
apavoratiago said:
Hello everybody,
I know that the scene is working really hard making and porting ROMS for the NT, now that CM7 (ALPHA) is out... I'm curious if is a CHANCE or light in the future to use a micro USB/HDMI output to be able to connect the tablet to a HD TV using MHL.
PS: Is the CM7 KERNEL capable of mounting or recognize keyboards, gamepads etc etc with micro USB port.
Click to expand...
Click to collapse
MHL is pretty cool .But AFAIK Nook does not have a HDMI out function. B&N would've advertised the **** out of this feature , coz it would have been a great advertising feature .IIRC most 7" tabs lack video output .
USB OTG has not been described as a feature and seems very unlikely .
If the bluetooth module (present but disabled) is unlocked and drivers installed , then BT keyboards, gamepads possible in the distant future .
Hav fun
Gwindli said:
I'm pretty sure that video output would require some hardware support, soas far as I know that won't be possible.
I don't know about using the USB for external devices, but if they ever figure out the "magic number" it should be possible via Bluetooth.
Click to expand...
Click to collapse
It is possible to pipe the display signal with software plugin and rebuild in PC via normal USB connector. It works in PSP.
Can someone send me the internal zip for cm7 please
Sent from my BNTV250 using xda premium
scotthall1515 said:
Can someone send me the internal zip for cm7 please
Sent from my BNTV250 using xda premium
Click to expand...
Click to collapse
This would be awesome.
Hi,
I've googled this question and it seems that it does. However, I'm plugging a USB flash drive (Sandisk Cruzer 1GB) into the device and nothing seems to be happening.
Yes it does.
Did you buy a USB OTG cable? And did you check within a file explorer of your choice (I'm using EStrongs) whether you get the USB storage as a new directory? I unfortunately neither do carry the USB OTG cable nor a USB stick with me so I can't tell you the exact directory name.
goister said:
Hi,
I've googled this question and it seems that it does. However, I'm plugging a USB flash drive (Sandisk Cruzer 1GB) into the device and nothing seems to be happening.
Click to expand...
Click to collapse
Works with my firmware mod C232B005 and the new kernel-3.0.42.
I just tested that with some video from a 8Gb USB pen drive.
You need a mini USB-B to USB-A adapter/connector.
I'm using build number S7-301uV100R002C232B005, Android version 4.0.3, kernel version 3.0.8
I bought a USB OTG cable, don't have a file explorer but alogcat didn't show any activity when I plugged the drive in.
Works fine on mine. It was even working in HC3.2 rom. Keyboard, mouse, pendrives and usb card readers ( used to read my cybershot's card) works fine. But have to tap 'mount usb storage' several times to access my other phone's (HTC wildfire) SD card over usb.
Sent from my HUAWEI MediaPad using XDA Premium HD app
is your usb flash formatted on FAT32?
OTG works fine even on stock rom. Tested with various USB flash drives and card readers/SD cards of various sizes. Also have played numerous media using the OTG too. I think format should be FAT/FAT32.
One thing that didn't work was an external hard drive (500gb). Maybe it needs its own power for it to mount on the mediapad though I haven't tried formatting it to FAT/FAT32 yet as its my backup drive.
Sent from my HUAWEI MediaPad using Tapatalk 2
ferdz33 said:
OTG works fine even on stock rom. Tested with various USB flash drives and card readers/SD cards of various sizes. Also have played numerous media using the OTG too. I think format should be FAT/FAT32.
One thing that didn't work was an external hard drive (500gb). Maybe it needs its own power for it to mount on the mediapad though I haven't tried formatting it to FAT/FAT32 yet as its my backup drive.
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
This has been an issue with Android USB OTG since the beginning. Flash drives, mice, and keyboards will work fine by themselves, but anything that requires a little more juice like spinning platter drives needs to be run through a powered USB hub. As for drive format, only FAT/FAT32 is supported. However, some custom kernels have allowed for NTFS file support.
As a side note, I can also confirm that USB 3.0 drives work with the OTG cable. (Patriot Supersonic Express 32GB tested)
isolated_epidemic said:
This has been an issue with Android USB OTG since the beginning. Flash drives, mice, and keyboards will work fine by themselves, but anything that requires a little more juice like spinning platter drives needs to be run through a powered USB hub. As for drive format, only FAT/FAT32 is supported. However, some custom kernels have allowed for NTFS file support.
As a side note, I can also confirm that USB 3.0 drives work with the OTG cable. (Patriot Supersonic Express 32GB tested)
Click to expand...
Click to collapse
I already had an inclination that this should be the case but was not able to confirm as I don't have any external HDD with its own power nor do I have a powered USB hub. Thanks again for providing this explanation.
other usb devices?
Does anybody know if the OTG support on the springboard goes beyond OS/file system support, and allows for third party android apps to connect to usb devices?
an example would be the DSLR Controller android app or Remote Release android app being able to see/control a Canon DSLR...
thanks
tsenecal said:
Does anybody know if the OTG support on the springboard goes beyond OS/file system support, and allows for third party android apps to connect to usb devices?
an example would be the DSLR Controller android app or Remote Release android app being able to see/control a Canon DSLR...
thanks
Click to expand...
Click to collapse
I tried both apps with my Rebel XSi/450D and had no luck with the OTG cable. Neither app recognizes that the camera is plugged into the tablet. I'm running HWMODs ROM with the MediaPad EX kernel. The last time I tried the app was with my Asus Transformer TF101, and it worked great (no OTG needed though).
Camera also doesn't mount as usb device for file transfers when plugged in.
---------- Post added at 10:48 AM ---------- Previous post was at 10:41 AM ----------
441Excelsior said:
is your usb flash formatted on FAT32?
Click to expand...
Click to collapse
FAT32 works perfectly with OTG cable. However, I can confirm that NTFS works just fine also. Not sure if it's built into the stock ROM but it works for me running HWMODs ROM and the MediaPad EX kernel.
Remote control works perfectly fine with my 550D over OTG cable. USB FAT32 sticks works fine as well. Don't remember about NTFS. DO NOT connect exFAT drives, as Huawei ROMs kills exFAT partitions! And I wasn't able to recover them. It won't recognize my card reader though...
hwmod said:
Works with my firmware mod C232B005 and the new kernel-3.0.42.
I just tested that with some video from a 8Gb USB pen drive.
You need a mini USB-B to USB-A adapter/connector.
Click to expand...
Click to collapse
hi i have just bought a huawei mediapad t1-8.0 and i change it to russian firmware-rooted with towellroot-installed with estrong but i cant see any usb device when i plug in my usb with usb otg cable. anything missing in my component to make it work? tnx for add in your rlpy.
I am not that skilled IT wise I wrongly assumed that my OTG device was a plug and go! Now I am stumped I had hoped to turn my Huawei T5 pad as A TV in my camper. 12v TV's are to expensive as I am retired on a limited income. Is there an easy fix in IT speak that may work for me???
Hello
Just got my new Nexus Player and after long search I can't find the right answer.
I want to connect the player to my Ethernet in my house for better connection and if possible to add an external HDD.
Here is my list of questions and I hope that I've got the the right place:
1. I want to have the maximum network speed and I have Giga cables in my walls . Is there a standards in the adapter that I need to buy to have the maximum speed? Or all the adapters have the same speed limit?
2. Is there a way to connect both Ethernet and USB HDD long side? Is there a magic box that have USB and also an Ethernet connection? If there is I would like to get an advise what is the best one to buy.
If someone have an experience what the items I need and have an advice what is the best to buy - I will love to get some links.
Many thanks in advance
Sent from my iPhone using Tapatalk
I found this , will this work with the NP : http://www.satechi.net/index.php/sa...lan-network-adapter-for-windows-mac-and-linux
Sent from my iPhone using Tapatalk
This was about the 5th thread in this forum...
http://forum.xda-developers.com/nexus-player/accessories/gigabit-ethernet-usb-adapter-t2938172
You'll need an OTG cable, a USB 2.0 hub (a powered one if you're going to hook up non-powered hdd), and then just about anything you want will work through the hub. For expanded storage you'll need to root and install stickmount. If you want to install large games then you may need foldermount as well.
Sorry for posting the same issue for the 5th and many thanks for helping me - now it's time for shopping
Sent from my iPhone using Tapatalk
I'm still haven't found the right accessory - I really would love to buy only 1 item that have powered USB hub with fast Ethernet . Is there any one that have this ?
Sent from my iPhone using Tapatalk
james341 said:
I'm still haven't found the right accessory - I really would love to buy only 1 item that have powered USB hub with fast Ethernet . Is there any one that have this ?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
In Amazon type in "ethernet USB hub", many results will come up. Here is a link to the first one. I don't know for sure if it is compatible or not though.
Anker® 3-Port USB 3.0 HUB with 10/100/1000 Gigabit Ethernet Converter (3 USB 3.0 Ports, A RJ45 Gigabit Ethernet Port, Support Windows XP, Vista, Win7/8 (32/64 bit), Mac OS 10.6 and above, Linux) https://www.amazon.com/dp/B00KGV7I9Y/ref=cm_sw_r_awd_-ifUub140WKQG
The problem is that even if the adapter supports full Ethernet speed the USB port on the nexus player will not.
So, you should get the benefit of a stable connection... But it will never be beyond USB 2.0 speeds.
I am connected to 2.5ghz wireless N and I haven't had a problem with 1080p Netflix, no stutters on YouTube and modern combat 4 and 5 both play with no lag.
midnightzak said:
This was about the 5th thread in this forum...
http://forum.xda-developers.com/nexus-player/accessories/gigabit-ethernet-usb-adapter-t2938172
You'll need an OTG cable, a USB 2.0 hub (a powered one if you're going to hook up non-powered hdd), and then just about anything you want will work through the hub. For expanded storage you'll need to root and install stickmount. If you want to install large games then you may need foldermount as well.
Click to expand...
Click to collapse
Can anyone tell me why my USB flash drive doesn't always mount with my Nexus player? I've got a powered Plugable USB hub, with my pny 32gb fat32 format USB drive.
It keeps switching names and sometimes doesn't show up at all until after I rerun stickmount.
This happens after waking from sleep as well. I'm obviously rooted and unlocked what am I missing?
Also how do I activate pro on stickmount after I've purchased it. I just get a weird screenshots about the pro version when clicking upgrade....
trvbone said:
Can anyone tell me why my USB flash drive doesn't always mount with my Nexus player? I've got a powered Plugable USB hub, with my pny 32gb fat32 format USB drive.
It keeps switching names and sometimes doesn't show up at all until after I rerun stickmount.
This happens after waking from sleep as well. I'm obviously rooted and unlocked what am I missing?
Also how do I activate pro on stickmount after I've purchased it. I just get a weird screenshots about the pro version when clicking upgrade....
Click to expand...
Click to collapse
It might have something to due with a recent bug they fixed.
https://android.googlesource.com/platform/cts/+/7ed3699
toyotabedzrock said:
It might have something to due with a recent bug they fixed.
https://android.googlesource.com/platform/cts/+/7ed3699
Click to expand...
Click to collapse
Wow got a response almost a year later.... Lol
Good thing I don't have that crappy Nexus Player anymore Shield TV is where it's at!
Sent from my Nexus 6 using Tapatalk