All new update from (pro-teammt.ru) after 9.0.231 failed to flash by EMUI 1.1 Flasher, or by fastboot, giving error during last step (Huawei erecovery). My phone is unlocked mate 10 pro C185. Is the recent firmwares are different. or error in my phone?
BSAKotb said:
All new update from (pro-teammt.ru) after 9.0.231 failed to flash by EMUI 1.1 Flasher, or by fastboot, giving error during last step (Huawei erecovery). My phone is unlocked mate 10 pro C185. Is the recent firmwares are different. or error in my phone?
Click to expand...
Click to collapse
What kind of error?
Edit: Maybe you meant B271?In that case, try B274!
verification error at 5% in Huawei erecovery
In internet search some suggest flash of service firmware to resolve this type of error.
Is safe to flash older pie firmware (9.0.0.177) my current is 9.0.0.231 (model BLA-L29C185)?
Can any one help?
BSAKotb said:
In internet search some suggest flash of service firmware to resolve this type of error.
Is safe to flash older pie firmware (9.0.0.177) my current is 9.0.0.231 (model BLA-L29C185)?
Can any one help?
Click to expand...
Click to collapse
That's not the issue! You should try to flash B258 or B259, i don't recall which one was released as OTA for C185.
The problem with these new firmwares is that even if are looking as "unified" for all customs, they are not.
Edit : Found it! B258 was released for C185, so your best shot is to try flashing that one from FF.
@Pretoriano80
Thank you for your reply, I will try and report the result
I tried to flash firmware 258 but gives same error
Then I flashed 177 (2 files) success, and phone download and update small file automatically
I tried to flash firmware from 258 (pro-teammt.ru) failed with same error
I left the phone to download and update itself and successfully updated to 258
Are the files different , or Huawei modified erecovery to check before update?
Regards magisk, how to extract installed boot image (unlocked without root)
BSAKotb said:
I tried to flash firmware 258 but gives same error
Then I flashed 177 (2 files) success, and phone download and update small file automatically
I tried to flash firmware from 258 (pro-teammt.ru) failed with same error
I left the phone to download and update itself and successfully updated to 258
Are the files different , or Huawei modified erecovery to check before update?
Regards magisk, how to extract installed boot image (unlocked without root)
Click to expand...
Click to collapse
Hmm! That's odd, if EmuiFlasher works on C432, it should work on C185 too, at least if there's nothing wrong with the update file.
As for root, extract the recovery_ramdisk.img with Huawei Extractor, patch it with Magisk Manager and then flash the patched ramdisk in fastboot mode.
@Pretoriano80
I extracted the recovery_ramdisk.img with Huawei Extractor, patch it with recent Magisk Manager and then flash the patched ramdisk in fastboot mode. I followed all steps exactly, but stuck at booting after pressing the phone boot in safe mode with safe mode window (the system has detected an app launch anomaly and has entered safe mode and it is recommended that you install any recently pr updated third party apps to resume normal launch) and gives lists of recently installed with first item is magisk manager. After uninstall magisk manager, the phone boot normally but without root and magisk
Any help to root?
https://drive.google.com/open?id=11_-f_nY-mLZirU03TYHdaAgGELoykli1
BSAKotb said:
@Pretoriano80
I extracted the recovery_ramdisk.img with Huawei Extractor, patch it with recent Magisk Manager and then flash the patched ramdisk in fastboot mode. I followed all steps exactly, but stuck at booting after pressing the phone boot in safe mode with safe mode window (the system has detected an app launch anomaly and has entered safe mode and it is recommended that you install any recently pr updated third party apps to resume normal launch) and gives lists of recently installed with first item is magisk manager. After uninstall magisk manager, the phone boot normally but without root and magisk
Any help to root?
Click to expand...
Click to collapse
Did you enabled the 2 advanced options in Magisk Manager(preserve encryption and avb) , before patching?
In magisk manager 7.2.0 there no advanced setting to preserve encryption and avb
BSAKotb said:
Yes of course
Click to expand...
Click to collapse
Can you try this image - > https://mega.nz/#!UgUThaTC!QZceeV1squ-sTsaeKmkchUQww_9_iu5gRLERp9f9VMs
Make sure latest Magisk Manager is installed!
BSAKotb said:
In magisk manager 7.2.0 there no advanced setting to preserve encryption and avb
Click to expand...
Click to collapse
There is!
[email protected] I download your magisk.img and flashed with fastboot and reboot phone after finish with power + vol up then released power after your device is booting now appear and phone stuck at that stage till now
BSAKotb said:
[email protected] I download your magisk.img and flashed with fastboot and reboot phone after finish with power + vol up then released power after your device is booting now appear and phone stuck at that stage till now
Click to expand...
Click to collapse
Then i don't know what's wrong, just flash back your original recovery_ramdisk and the device will boot.
@Pretoriano80
advanced option not shown , but showing paypal and Patreon instead with magisk manager 7.2.0 (213))up to date and magisk latest 19.3 not installed
@Pretoriano80 Thanks for your help. I flashed service firmware 177 , then wipe all data from erecovery followed by letting phone to update to 258. After the phone boot normally I flashed patched 258 boot image Finally rooted and operate normally.
Again thanks
BSAKotb said:
In internet search some suggest flash of service firmware to resolve this type of error.
Is safe to flash older pie firmware (9.0.0.177) my current is 9.0.0.231 (model BLA-L29C185)?
Can any one help?
Click to expand...
Click to collapse
From Firmware finder only latest full-ota is 9.0.0177. after that if the firmware is not full-ota u will not be able to flash. And Currently I am on Openkirin omnipie and I do flash 9.0.0.177 when ever i need Emui.
Related
i recently rooted mate 10 lite by unlocking boot loader .i had TWRP Recovery but forgot to backup my Stock Recovery (Now i uninstalled TWRP) now there is a system update when i select install it says Download Recovery.. then when i select download it says "Getting Package Info From The Server" after that this appears "Getting Package Failed" . How can i download and install from Huawei eRecovery . i tried frimware finder but there is no full firmware just updates . and i also tried manually update my Device but same thing happen . Thank You!!!
Usama-CW said:
i recently rooted mate 10 lite by unlocking boot loader .i had TWRP Recovery but forgot to backup my Stock Recovery (Now i uninstalled TWRP) now there is a system update when i select install it says Download Recovery.. then when i select download it says "Getting Package Info From The Server" after that this appears "Getting Package Failed" . How can i download and install from Huawei eRecovery . i tried frimware finder but there is no full firmware just updates . and i also tried manually update my Device but same thing happen . Thank You!!!
Click to expand...
Click to collapse
what full build are you on now? RNE-LxxCxxxBxxx
Anyway, you can download your build's update.zip from http://pro-teammt.ru/firmware-database/
and download Huawei Update Extractor.
Extract update.app from update.zip
Extract Huawei Update Extractor
Open update.app in Huawei Update Extractor
Rightclick on Recovery and "Extract Selected".
Flash extracted RECOVERY.img using Fastboot
Rne-l21c185b101
Usama-CW said:
i recently rooted mate 10 lite by unlocking boot loader .i had TWRP Recovery but forgot to backup my Stock Recovery (Now i uninstalled TWRP) now there is a system update when i select install it says Download Recovery.. then when i select download it says "Getting Package Info From The Server" after that this appears "Getting Package Failed" . How can i download and install from Huawei eRecovery . i tried frimware finder but there is no full firmware just updates . and i also tried manually update my Device but same thing happen . Thank You!!!
Click to expand...
Click to collapse
any news? were you able to update your rooted mate 10 lite to the latest firmware (the one with ar lens & face unlock feature) ? if yes, what steps have you done?
rendar123 said:
any news? were you able to update your rooted mate 10 lite to the latest firmware (the one with ar lens & face unlock feature) ? if yes, what steps have you done?
Click to expand...
Click to collapse
and also i would like to know when you updated your phone and it failed, does your phone boot normally again? were you able to use it again normally after failed update or it bootloop(ed)?
Oh no
ante0 said:
what full build are you on now? RNE-LxxCxxxBxxx
Click to expand...
Click to collapse
How can I know the full build? (from non booting phone), I only know it is RNE-L03... Please help
jjpainkiller said:
How can I know the full build? (from non booting phone), I only know it is RNE-L03... Please help
Click to expand...
Click to collapse
Can you use fastboot?
If so you can use:
fastboot oem get-product-model
fastboot oem get-build-number
ante0 said:
Can you use fastboot?
If so you can use:
fastboot oem get-product-model
fastboot oem get-build-number
Click to expand...
Click to collapse
You're the best, yeah so I now know i have to get the RNE-L03C69B001, not that I can find it easy lol
Thanks a lot
Requirements / Downloads
Honor 10 view BKL-09 with unlocked bootloader (I not tested in other version)
Minimal ADB & Fastboot
Patched Recovery_Ramdisk BKL
Rooting your device
1. Unzip Minimal ADB & Fastboot to any folder of your PC
2. Download the patched file for your device and copy it to Minimal ADB & Fastboot folder.
3. Start your smartphone in fastboot mode pressing [Vol-]+[Power] and connect it to your PC.
4. Open a Powershell window in your Minimal ADB & Fastboot folder by [Shift]+[Rightclick].
5. Flash the Recovery_Ramdisk:
Code:
fastboot flash recovery_ramdisk name_of_your_patched_file.img
Adjusting Magisk Manager and patching files by yourself
1. Download Magisk Manager canary build to your phone and install.
2. Change in Magisk settings the update channel to "custom" inserting this URL. https://t2m.io/wuAFCrwO
Magisk Manager now will find the canary builds.
3. Check "force encryption" and "AVB 2.0" boxes.
To patch yourself recovery_ramdisk:
4.a) Patch your *.img, that you have copied in any folder to your smartphone by pressing "Install" --> "Install" --> "Patch boot image" in Magisk Manager.
ORIGINAL RECOVERY_RAMDISK BKL-09 PIE version 9.0.0.162 C432
5. Transfer the patched file (You will find it in your download folder of your smartphone. It will be called "patched_boot.img".) to your PC, start Smartphone in fastboot mode and flash:
Code:
fastboot flash recovery_ramdisk name_of_your_patched_file.img
(You must adapt the file name to the real name of your file, e.g. patched_boot.img)
To actualize Magisk:
4.b) Choose in Magisk Manager: "Install" --> "Install" --> "Direct Install (Recommended)" --> Restart
Thanks
Thanks a lot for this great guide!
Hello, will this also be on my bkl-l09c432? I have rom
blazios said:
Hello, will this also be on my bkl-l09c432? I have rom
Click to expand...
Click to collapse
If your device is on pie ?, yes
What should I use twrp?
blazios said:
What should I use twrp?
Click to expand...
Click to collapse
OP never mentioned anything about twrp. That is not needed
I Have same version as you Android Pie and everythin firmware and region... But no matter how i try i get UNABLE TO UNPACK BOOT IMAGE... Instalation failed... why is that? i have TWRP installed... and everything as is your phone firmware and version 9.0.0.162 C432...
BlueMan_86 said:
I Have same version as you Android Pie and everythin firmware and region... But no matter how i try i get UNABLE TO UNPACK BOOT IMAGE... Instalation failed... why is that? i have TWRP installed... and everything as is your phone firmware and version 9.0.0.162 C432...
Click to expand...
Click to collapse
Flash in bootloader mode. Not in twrp.
Android pie not work with twrp for now.
I am on ROOTED EMUI 8.0 (BKL-L09 8.0.0.130). How do I update to pie and then root? First unroot than update than root? or just update and root with the instructions in post#1?
Sadly it does not work for me. Tried it with your patches bootimage and with my own. Flashing the ramdisk works fine but after restart I don't have root.
I dont need Magisk installed if I use the pre patches bootimage right? Nevertheless I tried with Magisk installed and without. In the Huawei Mate Forum I read that one might need to shutdown the phone after flashing and then to start it with Volume Up and Power Button pressed. But this also does not work. Or any Idea how exactly to start with this Key combination?
Any other suggestions?
Today I updated from OREO with root to PIE same version as you have in pictures 9.0.0.162(C432E4R1P9). Tried both steps (with your patched file and me patching file) to root my phone but even I always got OK in fastboot mode I still have no root
Hello,
Sadly applying the guide does't not work for me to. I tried with the given patched bootimage and with my own one. When flashing the ramdisk image in fastboot mode, i got this error :
"FAILED (remote: partition length get error)".
Please help!
resdano said:
Hello,
Sadly applying the guide does't not work for me to. I tried with the given patched bootimage and with my own one. When flashing the ramdisk image in fastboot mode, i got this error :
"FAILED (remote: partition length get error)".
Please help!
Click to expand...
Click to collapse
I get the same error
any advise ?
Worked like a breeze for me. Shoutout to @ante0 and @shashank1320 who kept their calm in guiding me through and suggesting me this method.
@ante0 made things easier for me and it worked excellently for me. The steps are-
Download and install Magisk canary builds from the mentioned link. Change in Magisk settings the update channel to "custom" inserting*this*URL.*https://t2m.io/wuAFCrwO
Magisk Manager now will find the canary builds.
Check "force encryption" and "AVB 2.0" boxes.
Transfer stock recovery ramdisk to phone, open Magisk Mnager and hit install - > patch boot image, select recovery_ramdisk.img. Take patched_boot.img from /sdcard/Download/ and transfer to computer, reboot to fastboot and flash patched_boot.img to recovery_ramdisk. Unplug USB, holv vol up + power to reboot to recovery, which will now boot phone with Magisk. If you reboot and don't hold vol up it will boot to system without root.
---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------
Huge thanks @fabio84
Finally have root privileges on Pie.
resdano said:
Hello,
Sadly applying the guide does't not work for me to. I tried with the given patched bootimage and with my own one. When flashing the ramdisk image in fastboot mode, i got this error :
"FAILED (remote: partition length get error)".
Please help!
Click to expand...
Click to collapse
davidsiv said:
I get the same error
any advise ?
Click to expand...
Click to collapse
Emui9 doesn't have a ramdisk partition. You flash to recovery_ramdisk, then when you reboot hold volume up to get to recovery (unplug USB as it will take you to erecovery if you have it plugged in).
This is the only way to get root on Emui9, currently.
It will not boot to recovery, it will boot to system with Magisk.
Not flash ramdisk. Need flash recovery_ramdisk!
worked, thanks
fabio84 said:
Not flash ramdisk. Need flash recovery_ramdisk!
Click to expand...
Click to collapse
@ante0 has been helping me get root access and we still are working on it.
@fabio84 did you by a chance experience issues in using root applications especially root explorer or root Uninstaller? For some reason they won't just work for me, just titanium and root checker works. On further scrutinising, I found the su binary files missing probably why the applications won't load for me. Any help?
ankan1993 said:
@ante0 has been helping me get root access and we still are working on it.
@fabio84 did you by a chance experience issues in using root applications especially root explorer or root Uninstaller? For some reason they won't just work for me, just titanium and root checker works. On further scrutinising, I found the su binary files missing probably why the applications won't load for me. Any help?
Click to expand...
Click to collapse
Update: @ante0 helped me yet again to figure it out. Apparently was because of pie's aggressive background restrictions. Root is now working full fledgedly. Thanks everyone. Big cheers to @ante0
Hello,
It finally worked for me. Thank you so much!
ante0 said:
Emui9 doesn't have a ramdisk partition. You flash to recovery_ramdisk, then when you reboot hold volume up to get to recovery (unplug USB as it will take you to erecovery if you have it plugged in).
This is the only way to get root on Emui9, currently.
It will not boot to recovery, it will boot to system with Magisk.
Click to expand...
Click to collapse
Last updated May 2020
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Objectives :
Have root using Magisk
Be able to install OTA from the settings without bootloops
Avoid boot loop
Very important :
This will work with ANY Xiaomi phone, and should work with ANY ANDROID phone as well. The difference between phones would be in where you can get your boot image from.
Your phone has to have an unlocked bootloader
Your phone has to have stock recovery. TWRP WILL cause bootloop for root and/or OTA updates from system.
I like to have root with magisk and don't want to install TWRP because I want to be able to install OTA from system without boot loops. This guide will help you achieve this with ease.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
https://youtu.be/KsxHial1v1U
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
https://youtu.be/USHcCMYlexM
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
fastboot reboot
Click to expand...
Click to collapse
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Update May 2020
Hello again,
Sorry for being away for so long. Here are some of the things I have noticed people are confused with and need to make them clear:
This method works for ANY Android phone. As long as you have the Correct boot.img and can unlock the bootloader
MAKE SURE 100% you have the correct boot.img file for your CURRENT ROM
MAKE 100% SURE, the boot.img file you get from the FULL ROM zip file, not an OTA update zip file
Make sure you check the date and time of the "magisk_patched.img" file to make sure that is the one you made
Make sure you use the LATEST magisk manager
Make sure you open magisk after flashing the magisk_patched.img as boot image. Magisk manager will tell you if there is another step needed, just click yes and it will be done in seconds
Make sure to enable "Hide Magisk" to allow you to have your BANK apps working as well as security checks
If any app you use gives you an error "YOU ARE Rooted bla bla bla" Use magisk manager to hide the root for this specific app (in the settings)
That's all I can remember, good luck
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Kiwironic said:
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Click to expand...
Click to collapse
After fastboot flash, reboot, open magisk manager, tap INSTALL beside "magisk is up to date". Then select direct install; reboot.
Works on MIUI 11.0.2; davinciin. ??
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
People report different amounts of wait time, depends on the mi account I think
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Can do with locked bootloader?
Micdu70 said:
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Click to expand...
Click to collapse
Thank you man :good:
Sent from my Xiaomi Mi 9T using XDA Labs
Cabeção-Flu said:
Can do with locked bootloader?
Click to expand...
Click to collapse
No, bootloader has to be unlocked.
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Lazer Bear said:
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Click to expand...
Click to collapse
I had root on MIUI10 and updated the ROM to MIUI11 then did my root again the way mentioned and did NOT have to wipe. You can get OTA anyway, it will try the update first, it will fail, then it download and install a full ROM zip automatically. You have to wait for it to do that twice, that's all. The first boot after the update takes some time.
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
kryzeK said:
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
Click to expand...
Click to collapse
If you flash the full rom, chances of bootloop is minimal. And should have stock experience except for being unlocked.
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
stone_henge said:
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
Click to expand...
Click to collapse
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
oblyvision said:
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
Click to expand...
Click to collapse
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Kiwironic said:
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Click to expand...
Click to collapse
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
On first installation MM asks to download what it needs e.g. to verify SafetyNet. Allow and there is no problem about. TWRP is generally not needed to install Magisk. Things are documented in Magisk guides
https://topjohnwu.github.io/Magisk/
https://www.didgeridoohan.com/magisk/HomePage
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Kiwironic said:
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Click to expand...
Click to collapse
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
oblyvision said:
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
Click to expand...
Click to collapse
You have to understand the requirements :
- stock recovery
- install magisk manager app
- patch the boot image for your stock ROM (same version on your phone)
- flash that Patched boot image.
- reboot
- done, that's magisk installed
Hi,
I'm trying to root the tablet. Unfortunately so far without success. I have tried several rooting tools (Desktop and Tablet App).
What promised most success is Magisk. It is also known that it works with Android 9. I copied the bootimage on the tablet from the stock-ROM, patched the image with the latest Magisk-APP (7.5.1) (Magisk 20.3 (20300)). Then back to the PC, and with fastboot written to the boot partition. After unlock the partition, this was possible. After a restart, however, the tablet will remain on the boot logo. Original stock-ROM on it again, tablet runs again (no boot loop).
Then I looked at the image sizes. The original is 16,385 kB. However, the patched Magisk file is only 7,148 kB. That can't really be, can it?
Does anyone have an idea of what this can be, or what I'm wrong about?
Thank you for your help.
hw-schrauber said:
Hi,
I'm trying to root the tablet. Unfortunately so far without success. I have tried several rooting tools (Desktop and Tablet App).
What promised most success is Magisk. It is also known that it works with Android 9. I copied the bootimage on the tablet from the stock-ROM, patched the image with the latest Magisk-APP (7.5.1) (Magisk 20.3 (20300)). Then back to the PC, and with fastboot written to the boot partition. After unlock the partition, this was possible. After a restart, however, the tablet will remain on the boot logo. Original stock-ROM on it again, tablet runs again (no boot loop).
Then I looked at the image sizes. The original is 16,385 kB. However, the patched Magisk file is only 7,148 kB. That can't really be, can it?
Does anyone have an idea of what this can be, or what I'm wrong about?
Thank you for your help.
Click to expand...
Click to collapse
Seems like Magisk Manager is not able to patch the boot.img properly.
The size of patched image is never lesser than the original boot image.
Try patching your boot image using an older version of Magisk Manager.
HIT THANKS IF FOUND USEFUL
Augustoandro said:
Seems like Magisk Manager is not able to patch the boot.img properly.
The size of patched image is never lesser than the original boot image.
Try patching your boot image using an older version of Magisk Manager.
HIT THANKS IF FOUND USEFUL
Click to expand...
Click to collapse
Thank you Augustoandro, but unfortunately I can't use an older version. Since I want to run my device with magic, I only have to install the apk. If I take an older one here, I will only get to the patch buttons when the app is updated.
So this proposal does not help.
Perhaps it is also because the 7305F does not seem to have the partitions set up as usual. If I want to make a BackUp using the tool "MTKdroidTools 2.5.3" (screenshot), it means that the partition structure does not fit and no backup is possible. A root with the tool is also not possible.
Is there another idea?
For more information:
CPU MT8321 (32bit), Memory 1/16GB, kernel 4.9.117+ (#25.10.2019)
I was able to patch the file with magisk and flash the
boot, but no root. Were you able to find a solution to your problem?
macgajos said:
I was able to patch the file with magisk and flash the
boot, but no root. Were you able to find a solution to your problem?
Click to expand...
Click to collapse
You have to root by means of Magisk: Magisk itself doesn't root the Android.
jwoegerbauer said:
You have to root by means of Magisk: Magisk itself doesn't root the Android.
Click to expand...
Click to collapse
Thank you for your reply. Sorry for not being clear here: I get "Magisk is not installed" info in magisk manager after flashing the magisk patched boot img in fastboot mode.
I have found the way to install MAGISK. You have to install MAGISK to the recovery.img. Then start in Recovery-mode and the system will boot to the normal System with installed MAGISK. Works perfect to me.
Some more information. There is an update named TB-7305F_100049_200508_ROW. After you have update to this release, you haven't MAGISK installed and you are not able to reinstall MAGISK. Also, when you get the original recovery from the version it is not possible. As well, I have tested to use the working recovery from the prerelease with the newest release, this also don't possible. For me the only working release is the TB-7305F_100043_200223.
If someone flash a later version that woks, please let know here!
hw-schrauber said:
I have found the way to install MAGISK. You have to install MAGISK to the recovery.img. Then start in Recovery-mode and the system will boot to the normal System with installed MAGISK. Works perfect to me.
Some more information. There is an update named TB-7305F_100049_200508_ROW. After you have update to this release, you haven't MAGISK installed and you are not able to reinstall MAGISK. Also, when you get the original recovery from the version it is not possible. As well, I have tested to use the working recovery from the prerelease with the newest release, this also don't possible. For me the only working release is the TB-7305F_100043_200223.
If someone flash a later version that woks, please let know here!
Click to expand...
Click to collapse
Yes, recovery is the way to go. I have figured it after reading this:
topjohnwu - install.html#boot-image-patching
As I have X model, TB-7305X_S100043_200224_ROW and TB_7305X_S100062_200610_ROW was the ROM that worked. Cool thing is that you can get roms from lenovo with "Rescue and smart assistant" app.
The trick that makes magisk rooted all the time is to choose 'reset phone' after rooting. This would cause the tablet to start with root each time.
macgajos said:
Yes, recovery is the way to go. I have figured it after reading this:
topjohnwu - install.html#boot-image-patching
As I have X model, TB-7305X_S100043_200224_ROW and TB_7305X_S100062_200610_ROW was the ROM that worked. Cool thing is that you can get roms from lenovo with "Rescue and smart assistant" app.
The trick that makes magisk rooted all the time is to choose 'reset phone' after rooting. This would cause the tablet to start with root each time.
Click to expand...
Click to collapse
What do you mean with reset? When MAGISK is in recovery, the only way to start is in the recovery-mode. Then you have ever MAGISK working when it is installed!?!
Today I have seen, that there is a new version for the "F" model. TB_7305F_S100055_200703_ROW. I will test and report!
How do I pull the Recovery.img from this tablet in the first place? Please help. Thanks.
Hi. I am trying to manage root without twrp for a couple of days. I picked up the solution with recovery.
I've tried to flash root to recovery with magisk patched recovery.img via fastboot. But the .img size is to large (is texted in fastboot). By the way i was curious after magisk patching cause the patched .img file has the same size as the original .img file. I downloaded twrp port tool and ported recovery.img and got a recovery.img with a smaller size so i was able to flash it via fastboot. Fastboot flash recovery recovery.img
Fastboot reboot.
Device is booting to Lenovo splash screen with the warning that the device is unlocked and boot in 5s. Could wait forever. After 2min pushed vol+, Lenovo Banner starts to flip and it booted to system.
But no root.
Reboot.
Boot with key combo
Hold Vol+ and power, released as lenovo splash with the warning appears. Nothing happend.
Pushed vol+. Nothing happened. It stuck at splash.
After that i could not boot the device with power key anymore. It stays at splash every time i rebooted.I had to reboot to recovery and do rebooting to system from recovery.
From bootloader i was able to boot to system also.
I like to flash magisk patched boot.img via fastboot but magisk doesn't make the .img file smaller.
I tried with sp flash tool but after patching the img is not signed anymore soflash tool doesn't flash it.
So that is my state for now.
_
_
Hi all,
I want to remove all of the google apps from my tablet 7305F in a bid to save ram, adb does most of the trick. can even uninstall play store, but the google play services com.google.android.gms is very hard to disable, keeps popping a "play services has stopped" message frequently.
till now I was able to free upto 50 % ram using this trick only its annoying that the play services message keeps popping.
PART HO said:
Hi all,
I want to remove all of the google apps from my tablet 7305F in a bid to save ram, adb does most of the trick. can even uninstall play store, but the google play services com.google.android.gms is very hard to disable, keeps popping a "play services has stopped" message frequently.
till now I was able to free upto 50 % ram using this trick only its annoying that the play services message keeps popping.
Click to expand...
Click to collapse
.....Install twrp and root rights, it's not difficult. You can then do whatever is needed
I rooted my Lenovo M7 (TB-7305X) the folling way
On a PC Get and Install LMSA "Lenovo Rescue and Smart Assistan"
* Using LMSA do a recovery, this way you are sure you have al the drivers working and that you have a correct rom
On the Tabled enabled developer mode
* enable remote debugging
* enable oem unlocking
Unlock the bootloader using fastboot
(you will find adb and fastboot in the location where LMSA was installed)
P.S. this will erase of data on your tablet
* adb reboot-bootloader
* fastboot flashing unlock
* fastboot reboot
PS tablet well be in orange state (because the bootloader is unlocked)
* android boots
On the tablet create a rooted boot.img using magisk
* download and install the latest magisk.apk
* look for boot.img (boot.img_verified) the ROW downloaded by LMSA (some where in c:\programdata)
* uplad the boot.img to the tablet
* start magisk and patch the boot.img file
* download the patched boot.img
On the PC start MTK_Flash tool
P.S. this will erase of data on your tablet
* open the download tab
* the download agent should be set by default (MTK_AllInOne_DA.bin)
* select the scater file (from the LMSA rom directory)
* deselct all files except BOOTIMG
* change the location of the BOOTIMG and select the pached boot.img
Flash boot.img by clicking download
Rooting instructions for TB_7305X (Should be the same for TB_7305F using TB-7305X_S100043_200223_ROW)
Install Rescue and Smart Assistant from Lenovo
Start Rescue and download latest ROM
Replace the latest ROM files from C:\ProgramData\RSA\Download\RomFiles\TB_7305X_S1000xx_xxxxxx_ROW with the ones from TB-7305X_S100043_200224_ROW
Can be downloaded from:
https://mirrors.lolinet.com/firmware/lenovo/Tab_M7/TB-7305X/
Rescue the device as per the RSA instructions
Install latest Magisk
Upload recovery-verified.img from the TB-7305X_S100043_200224_ROW ROM to the Internal Shared Storage of the device in Download directory
Run Magisk Manager
Patch the recovery-verified.img with magisk
Copy the newly created magisk_patched-xxxxxxxx.img file in Downloads to C:\Program Files (x86)\Rescue and Smart Assistant and rename to magisk_patched.img
It will later be used to flash the device after unlocking
Enable developer mode on the device
From developer options enable:
OEM Unlocking (needs Internet connection)
USB Debugging
Start cmd and navigate to C:\Program Files (x86)\Rescue and Smart Assistant directory
adb reboot bootloader
Wait for reboot. You will see “=> FASTBOOT mode …” message when ready
fastboot.exe flashing unlock
Press volume up key to confirm
fastboot flash recovery magisk_patched.img
disconnect USB cable
press volume-up+volume-down+power buttons to switch off the tablet
press volume-up+volume-down+power buttons to switch on the tablet in Recovery mode
When Lenovo logo appears release the buttons.
Wait several minutes. Do not give up, do not restart. It takes time.
Reconfigure device
Enable USB Debugging
Disable System updates
Reinstall Magisk
Your device is rooted.
Whenever you want to use it in rooted mode you have to switch to recovery mode
The normal mode calls boot.img where magisk is not installed and the device will not be rooted.
You may proceed with removing Orange mode 5 sec wait message. Instructions available on the Internet.
If at some point the device writs back the original Recovery mode just reflash with magisk patch recovery-verified.
Hi,
I would like to root my Lenovo TB-7305F as well. The file I have leased from Magisk generates "size is too large" in fastboot. This problem has been written by others. I have compared the original filesize and the patched filesize. They are identical. Exactly to the byte. I did it exactly as greenbul describes. However, he uses the 7305X and I use the 7305F.
Also the SP tool cannot upload this patched file.
I have the 1GB 7305F model.
Do you have any idea?
Many thanks
Andreas
Skylon5000 said:
Hi,
I would like to root my Lenovo TB-7305F as well. The file I have leased from Magisk generates "size is too large" in fastboot. This problem has been written by others. I have compared the original filesize and the patched filesize. They are identical. Exactly to the byte. I did it exactly as greenbul describes. However, he uses the 7305X and I use the 7305F.
Also the SP tool cannot upload this patched file.
I have the 1GB 7305F model.
Do you have any idea?
Many thanks
Andreas
Click to expand...
Click to collapse
Lenovo Tab M7 - Обсуждение - 4PDA
Lenovo Tab M7 - Обсуждение, Планшет, 7"
4pda.to
Lenovo 7 tb-7305f
Root and TWRP
Lenovo Tab M7 - Обсуждение - 4PDA
Lenovo Tab M7 - Обсуждение, Планшет, 7"
4pda.to
Before rooting, you'll need an unlocked bootloader. Check my previous guide here: https://forum.xda-developers.com/x3...ck-bootloader-realme-x3-t4136325/post83109505.
After unlocking, we can get started with rooting.
First, you'll want to install Magisk Manager. You can find the latest APK here: https://github.com/topjohnwu/magisk/releases.
Next, you'll need to download the latest OTA OZIP. There's a link at the end of the post for this.
While that's downloading, you'll also need to grab a copy of an OZIP extractor. Follow the link below, download the repository as a ZIP, and unzip it.
For this program to work, you'll need Python 3 installed. On Linux systems, it should already be installed. On Windows 10, you can install Python from the Store.
Open a terminal or CMD window and cd to where you extracted the OZIP extractor files.
Use pip to install the docopt module: "pip3 install docopt".
Once the OZIP has finished downloading, move it to the same folder as the extractor program.
Run the following command: "python3 ozipdecrypt.py NAME_OF_OZIP_FILE". This will take a while!
Once it's done extracting, there will be a ZIP file with the same name as the OZIP. We only need two files from here: boot.img and vbmeta.img.
Extract those two files to the same folder as the extractor program.
Copy the boot.img file to your device.
Open Magisk Manager and choose the "INSTALL" option next to the Magisk status. Tap "INSTALL" in the dialog that appears and then choose "Select and Patch a File."
Browse to where you copied your boot.img to and select it. Magisk will now patch it and create a file named magisk_patched.img in your Download folder. Copy magisk_patched.img back to your computer.
Reboot your phone into fastboot: "adb reboot bootloader". If you don't have ADB or fastboot installed (which you should, since you needed them for the previous guide), you can find the link in the bootloader unlocking guide.
Before you flash the patched boot image, you need to disable image verification, which is where the vbmeta.img comes in.
Run "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification" (remember, you'll probably need to unplug and replug the device after hitting Enter). This will disable boot verification and allow the patched image to actually work.
Finally, run "fastboot flash boot magisk_patched.img". This will flash the rooted boot image to your device.
Run "fastboot reboot" and let the phone boot back into the system. Check Magisk Manager and you should now be rooted!
Troubleshooting:
If you get an error that the boot image was "destroyed," don't worry. You'll just need to flash the stock boot.img and try again. Unplug your phone from your computer and wait for it to turn off. Once the screen is black, hold down VOL-DWN and PWR to enter fastboot mode. You can then run "fastboot flash boot boot.img" (where boot.img is the stock image) to restore. Reboot, then try the vbmeta and patched image flashing again.
You can get the OTA OZIPs from Realme EU's site: https://www.realme.com/eu/support/software-update.
You can get an OZIP extractor from here: https://github.com/bkerler/oppo_ozip_decrypt. (NOTE: you'll need to install the "docopt" Python module.)
OZIPs contain a boot.img, which you can extract and patch with Magisk for root. If someone else has an idea for patching Magisk into the boot.img, this is where to start.
Here's my patched boot.img for A.32. I don't recommend using this on other versions: https://www.androidfilehost.com/?w=files&flid=315334
Could you share your patched boot.img for the latest OS version? And could you check if the aux magisk module from X2 pro works to activate all aux cameras in Gcam? Thanks
Patched boot image
Thanks Zacharee1....Could someone upload the patched boot image for the latest one? Also do we have a generic version of twrp that can be installed on x3 ?? If yes, then we could try installing havoc gsi...
I've added a link to a patched A.32 boot.img.
also needed pip install pycryptodome win10
Zacharee1 said:
I've added a link to a patched A.32 boot.img.
Click to expand...
Click to collapse
Thanks a ton Zacharee!!
But it seems like I have A.33 version (https://www.realme.com/in/support/software-update)
I wish we had a video guide or something. Does anyone have a patched A.33 boot.img?
cheth20 said:
Thanks a ton Zacharee!!
But it seems like I have A.33 version (https://www.realme.com/in/support/software-update)
I wish we had a video guide or something. Does anyone have a patched A.33 boot.img?
Click to expand...
Click to collapse
It's pretty simple to patch it yourself. Download the OZIP, use the Python tool to unencrypt it, take the boot.img file out of the created ZIP, copy it to your device, and then patch with with Magisk Manager.
https://drive.google.com/file/d/1Od99thSd_a8sCOSpDYb0KyBLOzREiG76/view?usp=sharing
From Software Update - realme (India)
Firmware for RMX2085
I have RMX2085 model. So installing RMX2081 would be okay?
Actually I installed GSI ROM after this and now stuck with boot animation loops. Any idea if it would be okay to flash 2081 ROM else where can I get the one for 2085 version?
sukhad86 said:
https://drive.google.com/file/d/1Od99thSd_a8sCOSpDYb0KyBLOzREiG76/view?usp=sharing
From Software Update - realme (India)
Click to expand...
Click to collapse
cheth20 said:
I have RMX2085 model. So installing RMX2081 would be okay?
Actually I installed GSI ROM after this and now stuck with boot animation loops. Any idea if it would be okay to flash 2081 ROM else where can I get the one for 2085 version?
Click to expand...
Click to collapse
The firmware is the same for them all.
Great thread @Zacharee1. I have been waiting for this!
I have one question - is it mandatory to download the OTA package and do the patching? Is it because of the absence of recovery software like TWRP yet, for the X3 Super Zoom?
phonedroid said:
Great thread @Zacharee1. I have been waiting for this!
I have one question - is it mandatory to download the OTA package and do the patching? Is it because of the absence of recovery software like TWRP yet, for the X3 Super Zoom?
Click to expand...
Click to collapse
Yes, and that's why. It might be possible to pull the boot image directly from your device, but I'm not sure.
Can someone tell me if I can use realme 6 pro vbmeta.img?
realme x3 super zoom twrp recovery bro give me
Hi Sukhad,
I updated the system to the latest OTA (39), but I do not have the latest magisk patched file. Could you kindly help me with latest version patched boot for x3 superzoom?
sukhad86 said:
https://drive.google.com/file/d/1Od99thSd_a8sCOSpDYb0KyBLOzREiG76/view?usp=sharing
From Software Update - realme (India)
Click to expand...
Click to collapse
Thanks Zacharee1!
Finally did it (15/20 year old windows machines... Win7 was dificult and finally use a win8). Worth big as root gives me a new smartphone
Had all sorts of problems (installing python... But once installed was pretty quick) mainly adb conneting...
Anyway I will share vbmeta.img attached for a38 rom.
Also link to boot img, again a38.
For A38 rom
http://www.mediafire.com/file/i9jvl1al95k40vv/magisk_patched_a38.img/file
bro please could u tell me.. help
cheth20 said:
I have RMX2085 model. So installing RMX2081 would be okay?
Actually I installed GSI ROM after this and now stuck with boot animation loops. Any idea if it would be okay to flash 2081 ROM else where can I get the one for 2085 version?
Click to expand...
Click to collapse
bro please could u tell me.. after unlocking the bootloader of realme X3 superzoom , does it breaks the fingerprint sensor?
ota update after root
Someone have experiencing ota update failed on rooted device with this procedure? I m on RMX2081EU_11.A.40 but ota update to RMX2081EU_11.A.42 fails. how to update now?
Good afternoon. I want to get a root for my X3 super zoom, but I literally do not understand all the manipulations so that your description is attached with an image (screenshots). I think it will be useful for everyone who can't.
Anyone have working patched boot.img for a46?? I'm trying and always boot destroyed. Magisk 21.4
It's really weird on official en site there is a42 soft from September but on pl site there is a46 from December.