When I was Flashing Through Odin My galaxy A300f A sudden power Failure Caused and turned off my pc when power back Pc doesnot detect my phone after that I try to Turn On my android Its keeps vibrating Doesnt Stops when i press 3 buttons to reboot to odin it goes off (vibrate stops) it doesnot not display anything can someone help me
fazalmohamed11 said:
When I was Flashing Through Odin My galaxy A300f A sudden power Failure Caused and turned off my pc when power back Pc doesnot detect my phone after that I try to Turn On my android Its keeps vibrating Doesnt Stops when i press 3 buttons to reboot to odin it goes off (vibrate stops) it doesnot not display anything can someone help me
Click to expand...
Click to collapse
Hi , your situation is complicated because the firmware writing to your emmc is stoped in the middle because your power failure .
In order to try to bring your device back in life if your download mode is okey you can use USB JIG which you can find on Ebay or some other shop in order to put your device into Download mode .
Here is example how is look like .
https://www.youtube.com/watch?v=QcnNO_LplAE
If that dosn't work let your battery dry to 0% and then put the usb cable and just hold 3 keys for download mode until Download message is show up on your screen.
Good luck...
fazalmohamed11 said:
When I was Flashing Through Odin My galaxy A300f A sudden power Failure Caused and turned off my pc when power back Pc doesnot detect my phone after that I try to Turn On my android Its keeps vibrating Doesnt Stops when i press 3 buttons to reboot to odin it goes off (vibrate stops) it doesnot not display anything can someone help me
Click to expand...
Click to collapse
hello,
my friend had this same situation you are passing with.
i can confirm that using the usb jig from ebay wil help you.
good luck
Related
Help Guys i have a paperweight!
My samsung vibrant is totally bricked! I have tried many different meathods and all do not work at all. I even bought a jig off ebay! That doesn't even put it into download mode.
Please help!
Can someone please make my paperweight work again?
I was flashing a new baseband on the phone when Odin stalled for some reason. I accidentally disconnected my phone and now stuck on the phon!computer screen only!
Hi...
I had a similar situation with my phone.
When you get the "phon!computer screen" you should only connect the cable and start the flash with odin....
Try this and you could solve your problem...
i did it doesn't do anything!
When you have odin open, usb in the pc connected.... when you connect to phone while holding both volume buttons, does odin show a COM #?
if so, you should be okay... from that screen you can use odin.
well try this with phone off 1.take out battery 2.hold volume up and volume down together 3. while holding buttons down put battery back in 4.still holding buttons plug usb into it and should be in download mode .see if this helps http://www.youtube.com/watch?v=rqxearzXrVY here's a video might help to see it done
so i just got pissed and used odin3 and checked repartition and somehow after it failed. I pluged the phone in again and this time it finally went to download mode. Thanks everyon problem solved.
good to here
Hi Guys, greetings from India!
I have a E970 which I unfortunately bricked ( in what seems to be a hard brick) during flashing an updated ROM. The phone screen now does not turn on at all, though when I connect it to my computer the power button led flickers on and off, and the PC responds as if a removable device is getting attached to it and being removed in quick succession.
In Device Manager I can see that the phone gets recognized as QHUSB_DLOAD.
When I tried to run the unbrick process via LGNPST, the phone name flashes along with the COM port name in the software, then disappears, and then comes back again. Moreover, the process errors out at 85% but pressing the power button does nothing.
Since the screen does not turn on, I am not sure whether my phone goes into a download mode or not.
So - is the phone recoverable at all or is it all over? Please help.
Thank you.
Chironx2012 said:
Hi Guys, greetings from India!
I have a E970 which I unfortunately bricked ( in what seems to be a hard brick) during flashing an updated ROM. The phone screen now does not turn on at all, though when I connect it to my computer the power button led flickers on and off, and the PC responds as if a removable device is getting attached to it and being removed in quick succession.
In Device Manager I can see that the phone gets recognized as QHUSB_DLOAD.
When I tried to run the unbrick process via LGNPST, the phone name flashes along with the COM port name in the software, then disappears, and then comes back again. Moreover, the process errors out at 85% but pressing the power button does nothing.
Since the screen does not turn on, I am not sure whether my phone goes into a download mode or not.
So - is the phone recoverable at all or is it all over? Please help.
Thank you.
Click to expand...
Click to collapse
If device mgr is seeing the phone as qhusb, you done did bricked your phone. You need to jtag it to fix it. Your best bet would be to look into this... http://mobiletechvideos.mybigcommerce.com/lg-optimus-g-jtag-brick-repair/
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
BFahim said:
Hello to all,I am in a serious trouble with my samsung galaxy player 5.0 International China version . I rooted this with super one click.And it was successful and there was no problem.But as soon as I overwrote a file in lib folder of system,it got stuck.I tapped the power key and the screens light was gone.I again tapped but there was no response.So I held the power key for a while and the device restarted.But it got stuck on samsung logo and began to restart again and again.So I took it to download mode and tried to nand erase with odin,I thought it could format the device and my device would be fixed.But it took some time and I closed odin.Then I held the power key and it restarted with a black screen containing a picture of malfunctioning connection between a phone and computer at its middle.Then I again tried to t-flash it and again closed it without completion because my notebook had no charge.After that I flashed my device with the YP-G70-Kernel-r14 and it restarted with download mode.But if I hold the power key for a while it restart and again go to the brick showing screen(I heard that this brick is called soft brick).I downloaded two stock rom STOCK_G70XXKPH_G70XXKPH_XEF and G70XXKPL_G70XXKPL_XEF.I tried to flash them in my device with odin and they succeeded.But none of them could fix my problem.They remain in download mode and if I hold the power key the device again go to the soft bricked screen.My device isn't force shutting down.If I hold the power key the screen goes and again lights up with the bricked screen.Now,my device has become very hot and after 8-9 hours it has automatically turned off.But if I connect it to the charger it again lighten up with bricked screen.
Now,I am wanting to setup a clean and clear version of android 2.2/2.3.6 in my device.Is it possible?Will this fix my problem?If it does then please explain me the steps.Or if there is any other way to fix then please help me.
N.B. I am junior about andorid root,rom etc.It is the first device I rooted successfully.
Sorry for my bad and wrong English.
Please,help.I am in a bad danger.
Click to expand...
Click to collapse
I don't have a samsung device myself but if you can get in download mode and you can from what you described. What happened is that you deleted a driver (from the lib folder) that was necessary for boot (something important). To get to stock go here http://forum.xda-developers.com/showthread.php?t=2192488 download the right Firmware for your device. And the right pit file (pit file is the partition layout of the device). Flash using the pit file you got. You will fix that. Good luck.
Stock rom and pit file downloaded
cedie said:
remove your battery and wait 20 seconds plug in your charger without battery wait for 30 seconds then plug out charger then put your battery battery back then charge it try to turn it on
hope it helps
Click to expand...
Click to collapse
So,I am in the download mode.I downloaded the firmware (XXXKPL) and the intl pit file.Now what options would be checked in odin and where will I put the firmware file(PDA or Bootloader)?The device has no charge.If I connect to the charger,it wakes up and becomes very hot than normal.And I can't turn it off.Its battery is non-removable.Thank you for your valuable help.
I have a samsung galaxy s3 i9300! While i was sleeping, i was charging my phone and when i woke up the phone was stuck at the initial logo screen of samsung! Then, i tried to press the home bottom power and volume up bottom to reset while it was doing that it went back again to the logo screen before being able to choose wipe cache and stuff! I tried it several times! Then as i was searching through net i saw that odin thing custom Rom and i thought that maybe i should give it a try! So i tried to installed it by connecting my phone to the laptop but my pc did not identify my phone! Then I tried again by connecting and disconnecting the pc with my phone and while doing so i pushed the button of Repartition at Odin. My phone was not identified so i have no idea if that happened! Now my phone does not even open, or charging! Please tell me if there is a way to make it work again!
It might be of some help to mention that my charger is a new one that i bought from bol.com and its not the original one! I have no idea if that affected somehow the mobile functioning.
No, you are unlikely to fix that. You can try a usb jig, see if download mode will start, but it sounds like partial SDS followed by user panic until it was hard bricked.
If it didnt show in odin you have a driver issue and the repartition wouldn't have happened.
Remove battery, sd and sim. Make sure the battery is charged.
Insert battery and hold home+vol down while pressing power once.
If the screen lights up do not let go of home+vol down until it has entered download mode. If the phone wont light up at this point you have a bigger problem.
Once in download mode install the samsung mobile device drivers on your pc, you might need to try different versions, and plug the phone into the pc's usb on the motherboard. Try to avoid using front mounted or shared ports as they are unreliable. If your phone doesnt interact with your pc try other drivers.
Sent from a stolen phone!
Hi Folks
I have samsung s6 edge g925f which i tried to root with cf auto root but due to low battery it failed
Now my phone is stuck with emergency recovery screen but the thing is whenever i plug my charger to phone it shows emergency recovery screen (i don't know either it's charging or not) and whenever i remove my phone screen shows nothing
i can't boot it into download mode without plugging in usb or charger
and by using usb cable i get into downloading mode but odin detects my phone for like few seconds and disconnects
i tried using smart switch as well it also disconnects after few seconds
i don't know if it is battery problem or anything else
any help will really be appreciated thank you
try hold all buttons to restart the phone then boot to download mode when it restarts
astralmaze05 said:
try hold all buttons to restart the phone then boot to download mode when it restarts
Click to expand...
Click to collapse
bro i have already tried it but no success