not booting - Xiaomi Mi Pad Questions & Answers

I tried to come back to stock rom using mi flash tool.
I flashed this ''mocha_images_V7.0.3.0.KXFCNCI_20151016.0000.3_4.4_cn_01542818ed.tgz''
but it's not booting ...it's showing logo and restarting again but not booting into setup...help

saidaivakar said:
I tried to come back to stock rom using mi flash tool.
I flashed this ''mocha_images_V7.0.3.0.KXFCNCI_20151016.0000.3_4.4_cn_01542818ed.tgz''
but it's not booting ...it's showing logo and restarting again but not booting into setup...help
Click to expand...
Click to collapse
sorry my english is not very good.
You need to restore the BootBlobs stock first

Win Shark said:
sorry my english is not very good.
You need to restore the BootBlobs stock first
Click to expand...
Click to collapse
How to do that?

Related

I think my phone's bricked, help!

I think I'm bricked... I haven't had much experience with Android devices so be noob-friendly please!
So I bought a chinese MTK6589 phone called the Tronsmart TS7 Glacier. I tried to flash CWM recovery with an app called Flashify. I was using the right CWM recovery for my phone, but when it rebooted it opened the normal recovery mode, and then when I tried to reboot, it didn't get past the first logo that comes up... Normally it shows an android logo, then it goes to a little animation with the tronsmart logo, then it's started up. Now it's stuck on the android logo... I've tried reflashing the stock rom from my SD card but I can't do it because it only works in CWM, the installation aborts normally. I've done it before but I got into CWM through a different app called mobileuncle or something. So yeah what I think I need to do is reflash the stock rom, but I can't do it without CWM, and I can't get CWM... Help me :crying:
L3g3ndz said:
I think I'm bricked... I haven't had much experience with Android devices so be noob-friendly please!
So I bought a chinese MTK6589 phone called the Tronsmart TS7 Glacier. I tried to flash CWM recovery with an app called Flashify. I was using the right CWM recovery for my phone, but when it rebooted it opened the normal recovery mode, and then when I tried to reboot, it didn't get past the first logo that comes up... Normally it shows an android logo, then it goes to a little animation with the tronsmart logo, then it's started up. Now it's stuck on the android logo... I've tried reflashing the stock rom from my SD card but I can't do it because it only works in CWM, the installation aborts normally. I've done it before but I got into CWM through a different app called mobileuncle or something. So yeah what I think I need to do is reflash the stock rom, but I can't do it without CWM, and I can't get CWM... Help me :crying:
Click to expand...
Click to collapse
The steps should be the same and may differ from where you place the files and your device, hope it helps
http://forum.xda-developers.com/showthread.php?t=1160814
Sent from my Nexus 7 using xda app-developers app
Kelevra_96 said:
The steps should be the same and may differ from where you place the files and your device, hope it helps
http://forum.xda-developers.com/showthread.php?t=1160814
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the link, but I can't follow this because I have absolutely no idea how to boot into fastboot on my device..
L3g3ndz said:
Thanks for the link, but I can't follow this because I have absolutely no idea how to boot into fastboot on my device..
Click to expand...
Click to collapse
restore stock recovery using sp flash tool
shubhanshuG said:
restore stock recovery using sp flash tool
Click to expand...
Click to collapse
Thanks sooooo much! I looked into this and successfully got the phone to boot. :good:
L3g3ndz said:
Thanks sooooo much! I looked into this and successfully got the phone to boot. :good:
Click to expand...
Click to collapse
:victory:
shubhanshuG said:
restore stock recovery using sp flash tool
Click to expand...
Click to collapse
don't teach people how to use adb is a terrible idea....
Sent from my Nexus 7 using xda app-developers app

Huawei Ascend Y300: How do I unbrick?

Okay, my Huawei y300 was fine, rooted.
it was rooted on Stock Rom, at least I think it was Stock as I was unable to Flash any Roms.
So... I went into Rom Manager, and Selected Backup Rom.
It crashed instantly, when I booted, it came to a Green Screen with a Blue box and a Red box.
It will not load Recovery, It will not load Fastboot, and dload gets stuck as of 1/3 through.
Any fixes?
ZGNx said:
Okay, my Huawei y300 was fine, rooted.
it was rooted on Stock Rom, at least I think it was Stock as I was unable to Flash any Roms.
So... I went into Rom Manager, and Selected Backup Rom.
It crashed instantly, when I booted, it came to a Green Screen with a Blue box and a Red box.
It will not load Recovery, It will not load Fastboot, and dload gets stuck as of 1/3 through.
Any fixes?
Click to expand...
Click to collapse
same prob to me bruh!! u got any solution?
sarvz said:
same prob to me bruh!! u got any solution?
Click to expand...
Click to collapse
ZGNx said:
Okay, my Huawei y300 was fine, rooted.
it was rooted on Stock Rom, at least I think it was Stock as I was unable to Flash any Roms.
So... I went into Rom Manager, and Selected Backup Rom.
It crashed instantly, when I booted, it came to a Green Screen with a Blue box and a Red box.
It will not load Recovery, It will not load Fastboot, and dload gets stuck as of 1/3 through.
Any fixes?
Click to expand...
Click to collapse
Stuck at boot logo???
Salman Al-Badgail said:
Stuck at boot logo???
Click to expand...
Click to collapse
nope. its stuck with a green screen with 2 rectangular boxes . one is blue and the other one red
Bad Recovery, Try to Flash it with Stock ROM.
Things you need
-Stock ROM for your device
-USB drivers
-Flashing Tool
-Other Necessary file
SALMAN
(If I helped you please press THANKS)
Salman Al-Badgail said:
Bad Recovery, Try to Flash it with Stock ROM.
Things you need
-Stock ROM for your device
-USB drivers
-Flashing Tool
-Other Necessary file
SALMAN
(If I helped you please press THANKS)
Click to expand...
Click to collapse
but my phone dont support MTK( y300 0100)
sarvz said:
but my phone dont support MTK( y300 0100)
Click to expand...
Click to collapse
Doesn't matter, give a shot once

boot Problem

Hello I'm using MIUI 8.0.6.0 Global Stable. I unlocked the bootloader, then flashed twrp 3.0.2-2, the latest. I then flashed this ROM, cleared cache. After this when i boot, my phone just stuck on the MI LOGO for around 2 min or more sometime and this happens everytime when i boot either in recovery or system. Did I do something wrong? Help please, thanks.
which Rom did you flash? provide more info.
rjrulz007 said:
which Rom did you flash? provide more info.
Click to expand...
Click to collapse
I m facing this issue after unlocking bootloader, right now no rom is installed i hav fastboot erased all partion but then too it is getting stuck for 5 minutes at mi logo
First boot after flashing normally takes sometime thats normal.
rjrulz007 said:
First boot after flashing normally takes sometime thats normal.
Click to expand...
Click to collapse
No it happens everytime i boot either in system or in recovery. I dont no is this a booting problem or somethingelse

Flashing problem with twrp plz... Help... Guys...

I recently unlocked my redmi note 4 SD bootloader and flash a custom ROM after that I am Fashing battery draining issue so I tries to install stock miui through twrp but when I try to flash through twrp it goes blank and then again back on the home page of twrp every time so help me to flash stock miui....
sushantkumar said:
I recently unlocked my redmi note 4 SD bootloader and flash a custom ROM after that I am Fashing battery draining issue so I tries to install stock miui through twrp but when I try to flash through twrp it goes blank and then again back on the home page of twrp every time so help me to flash stock miui....
Click to expand...
Click to collapse
Flash Lazyflaser.
andreymixmax said:
Flash Lazyflaser.
Click to expand...
Click to collapse
Bro thanks for reply but the flashing process does not start... When I try to flash miui recovery ROM using twrp it goes blank and then back to the home page of twrp...
sushantkumar said:
Bro thanks for reply but the flashing process does not start... When I try to flash miui recovery ROM using twrp it goes blank and then back to the home page of twrp...
Click to expand...
Click to collapse
Is it correct his twrp file?

Can't go into recovery mode and can't factory reset.

My problem is different from others because my phone does not get stuck on logo, it gets switched on normally.
My device is HTC d816g ...i rooted with kingroot, these are happening after that. I have removed root completely but the problem is still there. When i try doing factory reset by going to settings, the phone turns off but then turns on again like i only rebooted it. Also when i try going to recovery mode, after clicking on the recovery mode button, the phone turns on instead of going to recovery mode.
Please tell me what to do, i searched a lot but no one has the same problem so i cant get the solution:crying:
pranavsinha1122000 said:
My problem is different from others because my phone does not get stuck on logo, it gets switched on normally.
My device is HTC d816g ...i rooted with kingroot, these are happening after that. I have removed root completely but the problem is still there. When i try doing factory reset by going to settings, the phone turns off but then turns on again like i only rebooted it. Also when i try going to recovery mode, after clicking on the recovery mode button, the phone turns on instead of going to recovery mode.
Please tell me what to do, i searched a lot but no one has the same problem so i cant get the solution:crying:
Click to expand...
Click to collapse
Flash it with twrp recovery
Sent from my iPhone using Tapatalk
princemeedo said:
Flash it with twrp recovery
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I tried that too, but nothing happened. Also I should mention i didnt feel like twrp went completely successful. Because 816 is the option in twrp but not 816g
pranavsinha1122000 said:
I tried that too, but nothing happened. Also I should mention i didnt feel like twrp went completely successful. Because 816 is the option in twrp but not 816g
Click to expand...
Click to collapse
Flash it with new firmware
Other thing if bootloader not open u can not go to recovery
Sent from my iPhone using Tapatalk
princemeedo said:
Flash it with new firmware
Other thing if bootloader not open u can not go to recovery
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thankyou so much. I installed stock firmware with help of smart phone flash tool. Now i can open stock recovery as well, and format too...,though its already formatted by applying new firmware.....but anyway thankyou so much for it Now i can install custom recovery and custom rom *_* Thanks
princemeedo said:
Flash it with new firmware
Other thing if bootloader not open u can not go to recovery
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
pranavsinha1122000 said:
Thankyou so much. I installed stock firmware with help of smart phone flash tool. Now i can open stock recovery as well, and format too...,though its already formatted by applying new firmware.....but anyway thankyou so much for it Now i can install custom recovery and custom rom *_* Thanks
Click to expand...
Click to collapse
Ok update.... My device was ok after firmware install...then i rooted it with kingroot, and it was successful, then i flashed twrp recovery file using flashify and now the recovery mode is not opening again...instead the device turns on when i choose "go into recovery mode".
Please help
pranavsinha1122000 said:
Ok update.... My device was ok after firmware install...then i rooted it with kingroot, and it was successful, then i flashed twrp recovery file using flashify and now the recovery mode is not opening again...instead the device turns on when i choose "go into recovery mode".
Please help
Click to expand...
Click to collapse
Good
Sent from my iPhone using Tapatalk
princemeedo said:
Flash it with new firmware
Other thing if bootloader not open u can not go to recovery
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
princemeedo said:
Good
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
No its not good....i want to apply custom recovery and custom rom. Please help

Categories

Resources