I have a problem with my Samsung S6 Edge Iron Man Limited Edition for an upgrade was interrupted the process use the application smart switch but I could not solve the problem, the attached images of the problem, try by all means to my country Argentina, but I I can not give me a solution, besides not speak Korean and the cell was sold in Korea and has a product code SM-G925SLRRSKO Korea
S / N: R39G50L296B. Thank you.
Warranty should be universal, contacted samsung?
contact me and told me that I have to lead to a technical service of the country where buy it. if he could get the firmware but I do not find it on any page firmwares.
Enviado desde mi DROID4 mediante Tapatalk
sebamariano said:
contact me and told me that I have to lead to a technical service of the country where buy it. if he could get the firmware but I do not find it on any page firmwares.
Enviado desde mi DROID4 mediante Tapatalk
Click to expand...
Click to collapse
Check in Sammobile Iron Man versions’ of the Galaxy S6 and the Galaxy S6 edge coming next month
I'm trying to work it out.
I believe you can get your phone to download it's correct firmware using emergency upgrade in smart switch with the serial number.
Have you tried going into recovery and factory resetting since you already flashed from smart switch? If it doesn't work after a wipe I would flash and wipe again.
and try several times with smart switch and not solved, and I can not get into recovery, only in download mode
Emergency Firmware recovery > Device initialisation > use your serial number and model. I really hope this works for you.
Bring it to an official repair store. Do not contact them by phone.
lynxblaine said:
Emergency Firmware recovery > Device initialisation > use your serial number and model. I really hope this works for you.
Click to expand...
Click to collapse
And try every possible way and does not work.
Apart from calling Samsung tech support I can only think next option is to flash default g925s firmware from sam mobile for Korea telecom and then after that try emergency upgrade.
Boot into download mode and flash a stock firmware with Odin.
https://samsung-firmware.org/model/SM-G925S/
lynxblaine said:
Apart from calling Samsung tech support I can only think next option is to flash default g925s firmware from sam mobile for Korea telecom and then after that try emergency upgrade.
Click to expand...
Click to collapse
you can take with another firmware 5.0.2, I did fail, download the 5.1 and it worked well, and I also retain the theme iron man, then upgrade to 6.0 and I disappeared the theme iron man. now is not where lower it, not be this in any folder, you do not know which are the themes extension.
Enviado desde mi DROID4 mediante Tapatalk
you can take with another firmware 5.0.2, I did fail, download the 5.1 and it worked well, and I also retain the theme iron man, then upgrade to 6.0 and I disappeared the theme issue now is not where lower it, not be this in any folder, you do not know which are the themes extension.
Enviado desde mi DROID4 mediante Tapatalk
sebamariano said:
you can take with another firmware 5.0.2, I did fail, download the 5.1 and it worked well, and I also retain the theme iron man, then upgrade to 6.0 and I disappeared the theme issue now is not where lower it, not be this in any folder, you do not know which are the themes extension.
Enviado desde mi DROID4 mediante Tapatalk
Click to expand...
Click to collapse
What?
is not understood because use translator.
I could recover, and I kept the original theme iron man. but then refresh to 6.0 and the theme disappeared me, and now I'm looking for where to get the limited edition iron man theme.
have a problem with my samsung s6 edge iron man, proble the application smart switch and I could not fix the problem, attached images of the problem, try by all means in my country Argentina, but do not know give me a solution, besides not speak Korean and*the cell was sold in Korea and has a product code of Korea SM-G925SLRRSK
Enviado desde mi Moto Z (2) mediante Tapatalk
Hi all,
I got yesterday my Amazfit Bip, charged it up to 100%, booted it and got interface in English as expected from an international version.
Paired it with my smartphone (Xiaomi Redmi Note 5, that should be a perfect match for it) and after firmware and resources update (using Mi Fit app) it is now in Chinese...
Can anyone help me to get English back? Firmware version is now V1.1.5.04
7tywan said:
Hi all,
I got yesterday my Amazfit Bip, charged it up to 100%, booted it and got interface in English as expected from an international version.
Paired it with my smartphone (Xiaomi Redmi Note 5, that should be a perfect match for it) and after firmware and resources update (using Mi Fit app) it is now in Chinese...
Can anyone help me to get English back? Firmware version is now V1.1.5.04
Click to expand...
Click to collapse
If it turned to Chinese after update, it isn't international, just check in the back of the watch if CE logo is present.
To have it back in English, Google for MakeCE procedure.
Inviato dal mio Redmi Note 5 utilizzando Tapatalk
Pi3rluigi said:
If it turned to Chinese after update, it isn't international, just check in the back of the watch if CE logo is present.
To have it back in English, Google for MakeCE procedure.
Inviato dal mio Redmi Note 5 utilizzando Tapatalk
Click to expand...
Click to collapse
found the procedure and running it right now.
fingers crossed...
7tywan said:
found the procedure and running it right now.
fingers crossed...
Click to expand...
Click to collapse
Everything went fine!
Thanks!
Today i received a update in my MI a3 but after the update i m not getting mi logo it changed into the telcle logo .
just for the check that this update is for all the indian user or only i m getting this error or this is genuine
I have the same Problem.
Was on Mi Version, got Update today and now i have telcle Logo in Boot Menü and instead of Mi i have XT Software Version.
I bought it in germany.
Is this after the 1.4 gigs update? What else is changed in this patch? I already had A10 but still got this update. Please let me know
LeAntsy said:
Is this after the 1.4 gigs update? What else is changed in this patch? I already had A10 but still got this update. Please let me know
Click to expand...
Click to collapse
Yes, it is after the 1,4 GB Update.
Now there are two mexican System Apps and a tecle Boot Logo and instead of mi Software IT is MX Version.
Some User say that they cant call anymore since the Update because the Sim card does not work anymore.
Incorrectly released OTA update, apparently SIM 2 will stop working (you might need to move your SIM to slot 1 to make calls).
https://c.mi.com/thread-3204184-1-0.html
Is there any official announcement from the mi regarding this issue?
dave.swaraj said:
Is there any official announcement from the mi regarding this issue?
Click to expand...
Click to collapse
You mean like literally one post above yours?
Hello, i am having the same issue. Telco is the logo im getting. The update was around 1.4 GB
Does anyone have any idea what to do?
Hey, so I've been using Xiaomi phones for quite a while, and I've gone through notes, Poco, the 9T pro, now up to the Mi10. I've only ever installed minor mods and such, never needed to flash ROMs before. I just set up my Mi10 today and it says no updates are available, staying on Android 10 and MiUI 11, even though it should have at least access to a beta MiUI12. Tried different regions, nothing.
I looked around and saw some ROMs for MiUI 12 for DL, there are ROMs for the Ultra and Pro, but not the basic. Thing is, the Pro and the regular are almost identical devices, save for I guess the camera sensors. So, I have a few questions.
Would the Mi10 pro ROM work for the regular Mi10 5G?
If not, is there a link I missed here for a MiUI 12 ROM for the regular one?
Can I really install a ROM through the phone itself, manually, and if not, is there a guide on here that I have also missed?
Soon
Check weekly builds on xiaomi eu website
Probably your device is branded. I have mi 10 EEA with android 11 and miui 12 v. 12.2.4
HTCDevil said:
Probably your device is branded. I have mi 10 EEA with android 11 and miui 12 v. 12.2.4
Click to expand...
Click to collapse
How do you mean? It's imported from the Netherlands and not locked to any carrier or anything, as far as I can tell. Hmm.
AeddGynvael said:
How do you mean? It's imported from the Netherlands and not locked to any carrier or anything, as far as I can tell. Hmm.
Click to expand...
Click to collapse
Send here system info, so we can see
HTCDevil said:
Send here system info, so we can see
Click to expand...
Click to collapse
Sure thing, is there any way I can easily do that?
Something like a log I can post?
You can post that screen
AeddGynvael said:
View attachment 5242399
Click to expand...
Click to collapse
As you see, VF is Vodafone branded firmware, so it is very slow in updating. You should change fw: unlock bootloader, use mi flash for flashing EEA fw. You can relock using that fw, not others
AeddGynvael said:
Hey, so I've been using Xiaomi phones for quite a while, and I've gone through notes, Poco, the 9T pro, now up to the Mi10. I've only ever installed minor mods and such, never needed to flash ROMs before. I just set up my Mi10 today and it says no updates are available, staying on Android 10 and MiUI 11, even though it should have at least access to a beta MiUI12. Tried different regions, nothing.
I looked around and saw some ROMs for MiUI 12 for DL, there are ROMs for the Ultra and Pro, but not the basic. Thing is, the Pro and the regular are almost identical devices, save for I guess the camera sensors. So, I have a few questions.
Would the Mi10 pro ROM work for the regular Mi10 5G?
If not, is there a link I missed here for a MiUI 12 ROM for the regular one?
Can I really install a ROM through the phone itself, manually, and if not, is there a guide on here that I have also missed?
Click to expand...
Click to collapse
Hi,
I had the same questions when i received my Mi10 last week (France) it was locked on mi11 and no update proposed
Now, before unlocking the bootloader, i could manually update with no problem to miui 12.0.6 European stable version through manual update (setting - > updates - > menu > select update package
The recovery update package can be found easily on Google.
Cosmox_ said:
Hi,
I had the same questions when i received my Mi10 last week (France) it was locked on mi11 and no update proposed
Now, before unlocking the bootloader, i could manually update with no problem to miui 12.0.6 European stable version through manual update (setting - > updates - > menu > select update package
The recovery update package can be found easily on Google.
Click to expand...
Click to collapse
HTCDevil said:
As you see, VF is Vodafone branded firmware, so it is very slow in updating. You should change fw: unlock bootloader, use mi flash for flashing EEA fw. You can relock using that fw, not others
Click to expand...
Click to collapse
Do I need to use Mi Unlock to unlock the bootloader, because I've never done that before?
And do you mean this one? Mi 10 EEA Firmware V12.2.4.0.RJBEUXM Update | Xiaomi Firmware Updater
If these are stupid questions, sorry, I genuinely don't know how it works.
Cosmox_ said:
Hi,
I had the same questions when i received my Mi10 last week (France) it was locked on mi11 and no update proposed
Now, before unlocking the bootloader, i could manually update with no problem to miui 12.0.6 European stable version through manual update (setting - > updates - > menu > select update package
The recovery update package can be found easily on Google.
Click to expand...
Click to collapse
You mean the V12.2.4.0.RJBEUXM Europe recovery ROM from here Download: MIUI 12 stable update rolling out to several Xiaomi, Redmi and POCO devices (xda-developers.com) ?
Because when I tried to install it with choose update package, it said something about couldn't verify carrier or something like that.
Haven't tried it in recovery mode after restart, but I was worried if that might have a bad effect on the device. I have not unlocked bootloader myself, never done it before.
AeddGynvael said:
Do I need to use Mi Unlock to unlock the bootloader, because I've never done that before?
And do you mean this one? Mi 10 EEA Firmware V12.2.4.0.RJBEUXM Update | Xiaomi Firmware Updater
If these are stupid questions, sorry, I genuinely don't know how it works.
Click to expand...
Click to collapse
No problem bro. Yes, you have to unlock bootloader with mi unlock and then use mi flash for flashing rom from here: https://c.mi.com/oc/miuidownload/detail?guide=2
Choose "last europe"
It is miui 12, Android 10, but then you receive ota update or download recovery update version from web.
In mi flash you can choose "clean all & lock" option, i have done same procedure for my device. Cheers.
AeddGynvael said:
You mean the V12.2.4.0.RJBEUXM Europe recovery ROM from here Download: MIUI 12 stable update rolling out to several Xiaomi, Redmi and POCO devices (xda-developers.com) ?
Because when I tried to install it with choose update package, it said something about couldn't verify carrier or something like that.
Haven't tried it in recovery mode after restart, but I was worried if that might have a bad effect on the device. I have not unlocked bootloader myself, never done it before.
Click to expand...
Click to collapse
VF is different from Global or EEA, so package doesn't match in update app
HTCDevil said:
No problem bro. Yes, you have to unlock bootloader with mi unlock and then use mi flash for flashing rom from here: https://c.mi.com/oc/miuidownload/detail?guide=2
Choose "last europe"
It is miui 12, Android 10, but then you receive ota update or download recovery update version from web.
In mi flash you can choose "clean all & lock" option, i have done same procedure for my device. Cheers.
Click to expand...
Click to collapse
Well, this really blows. I set up an account fine, logged in with MiUnlock, tried to unlock, it threw an error 1004. Tried again, told me to associate this device and number in developer settings. I did that, tried again, and it said "Try again 168 hours later, not earlier or you'll wait from scratch"...
This sucks.
I don't get it at all. Everything seemed fine. Is there really nothing I can do?
I'm almost tempted to just return the phone if I can't.
AeddGynvael said:
Well, this really blows. I set up an account fine, logged in with MiUnlock, tried to unlock, it threw an error 1004. Tried again, told me to associate this device and number in developer settings. I did that, tried again, and it said "Try again 168 hours later, not earlier or you'll wait from scratch"...
This sucks.
I don't get it at all. Everything seemed fine. Is there really nothing I can do?
I'm almost tempted to just return the phone if I can't.
Click to expand...
Click to collapse
It is normal, Xiaomi requests 170 hours generally for unlocking
HTCDevil said:
It is normal, Xiaomi requests 170 hours generally for unlocking
Click to expand...
Click to collapse
But it was with some sort of error message, is this normal?
If it's normal and I just need to try in a week, then ok, but if there's something else, I might as well return it since no telling when VF will release firmware, and I wasn't told it was VF-branded on purchase.
I also get something about "SMS_DOWNLINK_REACHED", if that matters, but it didn't seem to affect the Mi account or the developer options "add account to device".
AeddGynvael said:
But it was with some sort of error message, is this normal?
View attachment 5242621
If it's normal and I just need to try in a week, then ok, but if there's something else, I might as well return it since no telling when VF will release firmware, and I wasn't told it was VF-branded on purchase.
I also get something about "SMS_DOWNLINK_REACHED", if that matters, but it didn't seem to affect the Mi account or the developer options "add account to device".
Click to expand...
Click to collapse
You have to wait a week, yes. Seller should say if it is a branded VF device. If you don't want to wait you can return it. In my case i have paid 420 EUR, so i choose to unbrand it by myself.
I advice you to read some guide online for unlocking etc
Message in "mi flash" is normal, you have to use "mi unlock" before. They are different programs
HTCDevil said:
You have to wait a week, yes. Seller should say if it is a branded VF device. If you don't want to wait you can return it. In my case i have paid 420 EUR, so i choose to unbrand it by myself.
I advice you to read some guide online for unlocking etc
Message in "mi flash" is normal, you have to use "mi unlock" before. They are different programs
Click to expand...
Click to collapse
Yeah, I know they're different, this message is from Mi Unlock Tool, I followed the steps on Xiaomi's DL site for it, i.e. create and confirm a Mi account on the phone, download the tool, log in with the account, boot the phone in safeboot mode, try unlocking, llink the phone and number with developer options, etc.
If it's normal, then that's good and I didn't mess something up. All that's left is to wait and see if it works in a week.
Thanks a lot for the help, I hope this works out eventually!