LG-G7 G-710EM 9008 QUSB Mode Hardbrick - Android Q&A, Help & Troubleshooting

Hello!
I tried a Firmware upgrade via LGUP but unfortunately i hard bricked my Device while upgrading it to pie.
Now theres is a black screen, no LED and i can only "see" it as a 9008 QUSB Device
Is there a way for me to revive it?
Thanks

Related

LG G3 Hard Brick

Hello everyone,
i read this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and try to unbrick my hardbricked D855. I recently installed Marshmallow 30c and then it bricked. As described in the guide i need the TOT File belonging to the used firmware. Is it possible to use the 30b files? Any other suggestion?
Best regards
Hi
Did you managed to unbrick your lg g3 ?
I am having the same problem
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 mode,
kindly help me if you can
I've sended to LG under warranty. I'm excited if they repair it.
If you have no warranty then follow the following, it's very good. Google for "open-freax.fr lg g3" and follow the guide.

Galaxy S3 won't turn on but is detected by PC as "relink hs-usb qdloader 9008"

Galaxy S3 won't turn on but is detected by PC as "relink hs-usb qdloader 9008"
Hi everyone! I was given a Galaxy s3 recently, the SC-06D variant but it doesn't turn on no matter what. It won't boot into recovery or odin mode.
However, when I plug it in the PC its detected as "relink hs-usb qdloader 9008". Is there any way to fix my phone? If so what should I do?
Any help would be appreciated
Looks like the phone is hard bricked. You could try to revive the phone by booting with a boot image from an SD card and then try to flash a stock ROM.
Alternatively, you could try a cell shop that can force flash the stock firmware.
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place). See this: https://goo.gl/qFcdsF
Beamed in by telepathy.
shivadow said:
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place).
Beamed in by telepathy.
Click to expand...
Click to collapse
Will try this method right now. Thanks a lot

LG L80 (D375) Qualcomm HS-USB QDLoader 9008 brick

Hello everyone.
so, as the title says, I got this hard brick, I can't turn on the phone in any way (I don't even got a boot loop). it happened suddenly when I tried to turn the phone on, it had a stock rom (not the one that comes with the phone because it was corrupted by some kind of malware), the phone didn't turn on and the pc recognized it as QHUSB_Bulk, but after I installed the drivers the pc recognized it as Qualcomm HS-USB QDLoader 9008.
I tried with BoardDiag and QFIL but it doesn't worked. I just cant find the TOT file, I tried replacing files like partition.txt from other phones TOT files like the LG G2, but It doesn't works. with QFIL I tried but mixing D325 and D375 files (because I got the kdz and the dz from the D375 so I got some files to use), using the CMD I manage to make it finish the whole proces, but the phone is still bricked.
if anyone can help with the TOT file or another method that I didn't find it would be aprecciated.

LG v10 Bricked, Qualcomm Port Not Responding.

I have a bricked LG v10 in Qualcomm 9008 mode. The only thing that appears on the PC is the qualcomm 9008 device in device manager. No lights on phone, nothing. I tried using Qfil to flash the phone, but i keep getting an error: 'device took 10.000 seconds to respond which is more than 3.000, this indicates your target is unstable. '
i am wondering if anybody knows what may be causing this. I bought this phone in craigslist for $25 and the owner said that it just died on him but he didnt know what was wrong. The phone is mint condition it just doesnt show any sign of life besides the recognition of it by the computer as Qualcomm HS-USB QDloader 9008
AlexCano said:
I have a bricked LG v10 in Qualcomm 9008 mode. The only thing that appears on the PC is the qualcomm 9008 device in device manager. No lights on phone, nothing. I tried using Qfil to flash the phone, but i keep getting an error: 'device took 10.000 seconds to respond which is more than 3.000, this indicates your target is unstable. '
i am wondering if anybody knows what may be causing this. I bought this phone in craigslist for $25 and the owner said that it just died on him but he didnt know what was wrong. The phone is mint condition it just doesnt show any sign of life besides the recognition of it by the computer as Qualcomm HS-USB QDloader 9008
Click to expand...
Click to collapse
May be the phone remains in the 9008 mode for a short period of time. Try by loading files in the software beforehand so that u just have to press the download button as soon as the device is detected in 9008 mode.
Secondly kindly share qfil recovery files for v10 h901 model. Let me also try this by shortening the pins to boot phone in 9008 mode.

Vivo Y11 2019 hard bricked (stuck in EDL mode)

I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
me too, how to fix it please help
mortal786 said:
I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
Click to expand...
Click to collapse
Try Downloading the Firmware and Flash it via QFiL or QPST
I hope this works

Categories

Resources