At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
T95 S1
Mem 2/16
Build TS10022
Ver. 7.1.2
Wifi SSV6051P
Flash PFC-10AL
I managed to brick this one after i tried to install super su
I will not boot at all even with the sd card, the USB tool seems to see the box every time i plug it in with the usb cable. i have tried i believe ever IMG I was able to find for the 905 all fall at Uboot some before.
Any help would be nice i have been reading for almost 2 weeks on this one to the best i can comprehend
I do have 2 T95Z plus boxes 1- 2/16 and the other 3/32 both with Posion thank you Ricky
And A T9 with the RK3328 i messed up but found a firmware that finally worked on it
Thank you if you have any Ideas if not i can donate it to Ricky if he wants
Ok i went ahead and bought second T95 S1 2/16 same as the 1 above I need some help to boot TWRP on it and how to get a full back up img that i might be able to use USB Burn tool to fix the first 1 if that is possible.
I have tried to read about it
1st try was to take twrp img rename it to recovery on an sd card and press rest button and power up with th sd card in no go
2nd try was to install the twrp manager and install it from there no go
3rd try was to install a terminal app Typed SU the typed reboot recovery with twrp on sd card still no go that worked fin on my T95Z plus but not this T95 S1
Thank you for any help
OK so far i have not been able to get a TWRP that i can backup the good matching box I have tried half dozen or more
2.8.5.1_K200 sticks at the T95 logo
3.2.3.0 sticks at logo
S905W_TWRP_alpa boots but nothing in the back up section does not mount my SD card but see's a USB stick
TWRPq201_N-3.2.1.0 Split screen still does not have any thing to check under backup doesnot seem to mount anything but the usb stick
I Have tried Rickys AMLogicFlashTool Port TWRP tab
Selecte Pull recovery from device then create recovery and it goes to 40% and stays there I did not check the box Flash after porting
Im not sure if there is another way to do a complete back up in windows with this box
Thank you anyone
Update I was able to flash an img that Mergoo69 over at Atvxperience was able to get from the vendor box is back to stock
Hope this helps someone with a T95 S1 his img says 1/8 mine is a 2/16 but seems to work fine took USB burn tool abot 5 minutes to load. Hopefully someone can use this img to port this to 1 of the great roms
Jerryjr200 said:
Update I was able to flash an img that Mergoo69 over at Atvxperience was able to get from the vendor box is back to stock
Hope this helps someone with a T95 S1 his img says 1/8 mine is a 2/16 but seems to work fine took USB burn tool abot 5 minutes to load. Hopefully someone can use this img to port this to 1 of the great roms
Click to expand...
Click to collapse
Do you have a link to the ROM for the 1/8 version?
Its over at atvxperience forums under S905W thread Sunvell T95 S1 posted by Mergoo69 he or she was able to get it from a vendor. i Dont think im allowed to post links or upload files
Its on the first page 5th post
mousemat said:
Do you have a link to the ROM for the 1/8 version?
Click to expand...
Click to collapse
better late than never, right?
https://drive.google.com/open?id=11aBbXsaXy1aK3-b3PW9EsUVehOQKYU8F
Hello,
After trying to flash a Nexus rom on my tvbox, It bricked ( red led, not image, reset only working if I short 2 pins on the Nand ) . Now I can't find any rom for it, all of the firmwares I had tried to install stuck at 7% ( [0x32030201]Uboot/Get result/Disk Initial error ) with Usb burning tool. As for the SD card tries with Burn card maker, they do try to load the firmwares but stop at like 2-3 percent.
Is there any working, be it even stock firmware for this revision ?
Thank you.
Hi. Tested on my rev.2.3 if still looking for it
https://mega.nz/#!7IsxCKCS!ZDzQ9P3cCnmKjnl9s5dRJAFJTvGnxvxLSImlZr2PiHQ[/url
hi have you got the key for mega?
One year later bump. I bought a Tanix TX3 last year since I couldn't find a fix to my issue with the M8S Pro W but today I found the box while doing some cleaning so why not post again, maybe someone can help me with this bricked box issue.
Getting this error with usb burning tool with all the IMGs ( even Lunn ones ): 7% ( [0x32030201]Uboot/Get result/Disk Initial error ) M8S Pro W rev 2.3, p21x blue board, Spectek nand.
My original post from other forums:
Mecool M8S Pro W rev. 2.3 after trying to flash the Nexus rom on it. It bricked, red led, black screen, reset working, the only thing that worked was shorting the pins on the Nand flash. Now it gets detected by pc everytime I plug the usb into it. But...I can't find any good images to flash on it ( tried more than 15 of them ). Most of them get stuck at 4% with Usb burn maker or 7% ( [0x32030201]Uboot/Get result/Disk Initial error ). 90% of them aren't bootable with SD card maker, and those who do work, get stuck at like 2-3% on tv at "upgrading..." ( Lunn-NHG47L-20190418.114957.V0213.img , this one is among the few that is accepted by the tvbox on the SD card ). I am running out of ideas on how to get it working. Can anyone help me with a good firmware image ?
The board has a P21X motherboard and someone from another forum told me that I have SpecTek MLC-Nand FBML95B71KDBABH6-10AL
https://i.imgur.com/9YDyo4m.jpg
Edit: these are the IMGs I have tried so far =>*https://imgur.com/Yebndyl
Hi. Another link to download . img
https://mega.nz/file/7IsxCKCS#ZDzQ9P3cCnmKjnl9s5dRJAFJTvGnxvxLSImlZr2PiHQ
If its s905x you can try my rom
https://youtu.be/0uci6Rl70t4
Hi dear friends,
thank you in advance for your help. I have a strange stuation (at least for me) with this box from Foyu x96 mini.As you can see in photo and also written on paper box , it has Amlogic S905W 4G 32G rom, but if i go inside Kodi for example in System it says it has Rockchip 3229... then also on recovery mode on boot mode it states "android recovery rockchip 322x ..... I've tried with Amlogic burning tool but it doesn't recognize the hub connection and it doesn't burn another rom for S905w. I've tried shortening nand pins..nothing
Have you got any suggestions to erase all and burn an Amlogic s905w Rom , considering there's an S905w cpu?? i don't think it's a false one! there's no Rockchip inside!
thank you
Isn'it strange? Any suggestions?
..seems i found the million dollar question.. the only post that puts in crisis all the forum...
ive seen amlogic devices recovery reporting as rockchip, its usally just a mismatched recovery, i would try and figure out mask rom mode for this board, see my video here for some info
aidanmacgregor said:
ive seen amlogic devices recovery reporting as rockchip, its usally just a mismatched recovery, i would try and figure out mask rom mode for this board, see my video here for some info
Click to expand...
Click to collapse
Thank you for your kind answer,but i tried also with mask mode,it only sound but no connection. For me it's a fake chip,otherwise why with rockchip tool it normally connects? Also on kodi it's incredibly slow,and in system maximum resolution is 1280*720!! Absurd
Hi , I have exactly the same problem with a tv box x96 mini locked in the logo screen. If you find a way to recover, please post it.
gherghe said:
Hi , I have exactly the same problem with a tv box x96 mini locked in the logo screen. If you find a way to recover, please post it.
Click to expand...
Click to collapse
I can't see if yours has amlogic s905w chip,anyway mine it's not locked,you can try with rockchip tool to burn image if you got Rockchip inside
yes I have a S905x chip, it doesn't look very good but I managed to take a picture.I tried with usb burninig tools but my box is not seen by the computer and I don't know how to use the nand method.
If your x96mini is not locked, you can help me with a stock firmware of your box, to try a rewrite of my box with the sd card method. Thanks anyway for the help. I have been looking for a solution to unlock the box for some time.
gherghe said:
If your x96mini is not locked, you can help me with a stock firmware of your box, to try a rewrite of my box with the sd card method. Thanks anyway for the help. I have been looking for a solution to unlock the box for some time.
Click to expand...
Click to collapse
Yours is s905w, seems same situation.. i haven't got original firmware,in my case mine is made by Foyu,you can try to find them on internet, i don't know.. don't know why they're recognized as Rockchip..
ok , thanks
cipposo said:
...i don't know.. don't know why they're recognized as Rockchip..
Click to expand...
Click to collapse
Maybe, because is it "faked" remarked RK3229 as S905W.
Try to setup mSD card with LibreELEC...
Release RK322x first mainline release · knaerzche/LibreELEC.tv
Kernel 5.5.0 uboot 202001 lima drm / mesa 20.0 (beta) hdmi up to 2160p hantro video hw decoding for MPEG2/VP8/H264 up to 1080p Wifi only for chipsets that have mainline support no preconfigured rc ...
github.com
mAtvXk said:
Maybe, because is it "faked" remarked RK3229 as S905W.
Try to setup mSD card with LibreELEC...
Release RK322x first mainline release · knaerzche/LibreELEC.tv
Kernel 5.5.0 uboot 202001 lima drm / mesa 20.0 (beta) hdmi up to 2160p hantro video hw decoding for MPEG2/VP8/H264 up to 1080p Wifi only for chipsets that have mainline support no preconfigured rc ...
github.com
Click to expand...
Click to collapse
Sure,probably it is,but with librelec would be only kodi...
Hello, thank you for your help. If I install the firmware from the link you sent me, can I then write another firmware? If I find the original firmware.
cipposo said:
Sure,probably it is,but with librelec would be only kodi...
Click to expand...
Click to collapse
Just to confirm if you have Rockchip inside, anyway LE is runned from SD card, nothing will be installed onto the box.
Ok thank you.
Hi, I tried LibreELEC but it doesn't work. I'm attaching the image with the received error, maybe you know what the problem is. Thanks
gherghe said:
Hi, I tried LibreELEC but it doesn't work. I'm attaching the image with the received error...
Click to expand...
Click to collapse
Did you create bootable media...
Create Media - LibreELEC.wiki
wiki.libreelec.tv
Yes I created a bootable sd card, with LibreELEC rk322x the box does not start, the LED remains off.
Well it look like you guys have a fake amlogic like me on the tag is 4GB RAM and 32GB flash store. All the inside chip has been marked like the real one but are fake. Main chip is RK3229 and the ram is just 1GB and 8GB flash. I successfully unbrick this **** using rkfactory tool and a rom for RK3229 chip. step to follow: 1. install rockcip drivers, 2. start factory tool, 3. load firmware in factory tool, 4. conect USB A - A cable to pc, 5. tooth pick in the AV port and pres the restore switch from inside, 6. connect USB A - A to the OTG USB port on the box the port is the one next to the tf card reader, 7, the hub is recognized by the pc and it be detected by the tool factory, 8. flash the firmware, enjoy.
Files:
1 Drivers: https://mega.nz/file/q8kk0ayA#XA3ZCoZK-Lu0LW1alqq6qKBmzFTj4gDDnlLWqq0Joso
2 factory tool: https://mega.nz/file/ihVnBC5L#Ri-IY7uVxcbaXEMkgb_bSXKMcwbkbAnYFxnEuizREaE
3 firmware: https://mega.nz/file/2k8EzJxY#cY_NWvIyof8Rnd7syOK9OYc5Fot19Ub76L46nzTrAAU
Hello everyone,
I got a chinese box marked as MXQ PRO 8K 5G that got bricked, wrong img upload and lost bootloader , I have tried several images through the USB burning tools that fail around 4% but after debuging using UART I discovered that fail and reset while booting since the image do not match with the proper hardware, the box was not implemented with the recovery push button so after apart the board from case I realized empty spots where some components would be, so jumping the switch was impossible to change to recovery mode to boot from SD Card, so I would like some help in order to get the proper image or find a way to modify some bootloader to load the right hardware in order to boot. any help would be appreciated thanks. by the way It is my first approach to Android and although the chinese box is fair cheap to just dump I really encourage to solve the issue as a learning experience. thanks !
BTW, the stocked OS was Nougat MR1 build number 20211117, bootloader unknow, API Level 25... information taked before I messed the box !
Kernel Version
3.14.29
[email protected] #59
Wed Nov 14 16:36:30 CST 2021