The three cases that have caught my attention..
1. Official OnePlus nylon bumper case.
2. Rhinoshield solidsuit
3. Tech 21 case
Obviously for overall protection the most important how it looks and feels in the hand. Recommendations & opinions welcome thank you
Sent from my ONEPLUS A6013 using Tapatalk
I have the Rhinoshield and like it. Mine is the carbon fibre, and it has at least a little grip. I can't comment on the other one. The only issue that I have with it is that occasionally when I put it in my pocket it slides the alert slider up to silent or vibrate.
No major drops, but the case has protected the phone from the few small drops it has taken. Most out of my shirt pocket when I've bent down to pick something up.
Do you have any issues with the case being alittle loose or tight fit? Are you using a TGSP.? If so which one?
Thanks
Sent from my ONEPLUS A6013 using Tapatalk
I have the Rhinoshield case also. I have dropped it a few times and the phone has survived without any marks or scuffs. I dropped it about 1m onto a concrete floor and the phone was fine. The case has a few marks from wear and tear but it's done what it was designed for and protected the phone. I would say the case had a very tight fit. It's to the extent that it is difficult to remove the phone from the case when I want to clean the phone for example. I am using a TGSP with, but mine is not all the way to the edges of the phone so works without issue with the Rhinoshield case.
Tech 21 -
I was using it for probably about a week before I switched back to the factory provided one. The feeling is like holding a brick but you get grip. Which is lovely and all but the major loss of using the Tech21 is the slider use. I use my slider on a day to day basis. The Tech21 causes the bulge to be just to spacious to slide it up or down with ease.
Thanks for the replies yall. Last question guys, please someone just give me straight answer on the screen protector there is no solid answer anywhere.
Puregear, official OnePlus or one of the many Amazon brands like I'm omotion? Thanks
Sent from my ONEPLUS A6013 using Tapatalk
Leaning toward Blue tech 21 and the official Karbon fiber bumper case..
Tmobile has Blue tech 21 for
$19.97 & Black $39.99
Good deal on the Official oneplus 6t Karbon Bumper $19.97.
Best answer on TGSP compadable with both cases. Thanks
Sent from my ONEPLUS A6013 using Tapatalk
I used the omoton TGSP with my Rhinoshield case. No issues at all.... Well, except for the dust that seems to collect between the small gap around the edge between the side of case and the screen protector.
dj_ooms said:
I used the omoton TGSP with my Rhinoshield case. No issues at all.... Well, except for the dust that seems to collect between the small gap around the edge between the side of case and the screen protector.
Click to expand...
Click to collapse
oh yes...so much dust between the small gap,i really hate that
i tried 5 differents cases, the best one imao, Tudia Merge Case. i also love the official OnePlus provided with the fphone, but i don't like transparent colour. Official one has the better grip when you have it in your hand
only concern like we said..the dust gathering in the small gap around the edge. Unfortunately, 100% covering TGSP seems to not be so compatible with all cases i own.
i tried the Omoton, i also purchased the spigen TGSP, i'll try if it fit with the Spigen Tough Armor or other cases
Thread closed! There's already a thread with this topic. If interested, please continue here: https://forum.xda-developers.com/oneplus-6t/accessories/oneplus-case-selection-t3862462
XDA Forum Rules (excerpt):
1. Search before posting.
Use one of our search functions before posting or creating a new thread. Whether you have a question or just something new to share, it's very likely that someone has already asked that question or shared that news.
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Related
I know I've seen a few cases out there that allow access to the keyboard while still on. Would people post links to the ones you know of? I'm guessing that I'm not the only one looking for this, so this would be a helpful thread for lots of people.
There are many of them posted here.
there are threads about cases, but not specifically one with keyboard access. Rather than search through the other threads and look at lots of holsters cases that don't apply, I thought it would be good to centralize. That's why I made another thread. If I'm wrong, I'm sorry but I thought it a valid topic.
Try Boxwave
Poke_N_PDA said:
there are threads about cases, but not specifically one with keyboard access. Rather than search through the other threads and look at lots of holsters cases that don't apply, I thought it would be good to centralize. That's why I made another thread. If I'm wrong, I'm sorry but I thought it a valid topic.
Click to expand...
Click to collapse
Boxwave has a clear plastic case and one of those metal monstrosities that was so popular a couple years ago. I also saw some on Ebay but apparently there has been problems with them cracking in the front. They are dirt cheap though. The Boxwave cases are like 30 bucks. Krusell makes the Orbit Flex if you like a leather case. I have had their cases and like them but after dropping my phone when a multi adapt clip split, never went back. Very good warranty though.
Proporta do a flip case with aluminum in the lid to protect the screen. Clove technology also stock the same one. looks good
http://www.clove.co.uk/viewProduct....Category=7514D529-EBAB-4725-A295-1E4C98654734
http://www.proporta.com/F02/PPF02P05.php?t_id=4645&t_mode=des
No doubt Xperia Z3 is a beautiful design and most of the owners are inclined to show its curves, shape and color (specially the copper version) to others. I have been looking for many transparent cases around from different brands. In order to check their reviews, I looked at the reviews for xperia z2 cases by all of them.
My findings: Cheaper options available like yousave are not as transparent as they claim. The gel and silicon based cases are not at all transparent. Most of the transparent cases are susceptible to scratches. I have read good reviews about the tough naked case by CaseMate but the case does not protect the front. Then there is Spigen's case (which is not yet available yet) which has good reviews but the side bumper is made of TPU which is not totally transparent and looks a cheap look. The best reviews I found was for Ringke Fusion case however one really bad thing i have read about it is that if the phone falls, the sides of the case scratch the color off the phone. The case claims to have shock absorption but I fail to understand how they claim it.
If anyone among you have used any case before, please guide and recommend and review.
I was looking for a transparent slim case like this, but I can't find any for the Z3 only the Z3c.
http://www.ebay.com.au/itm/ULTRA-Sl...bilePhoneAccessories&var=&hash=item4187d2b0d6
I bought this one, still wanting for it to arrive here.
http://www.ebay.com/itm/Afan-Ultrat...t=US_Cell_Phone_PDA_Cases&hash=item27eb71f4e7
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
I ordered the Case-Mate Barely There case. It looks and feels OK, although protection is minimal as you'd expect. The cut out on the left is rather large as you can see, to allow the official dock to be used.
The case scratches rather easily. I marked the back by sliding my phone a few centimeters across the desk within an hour of using the case.
Overall, I wouldn't recommend it, due to how easily it scratches.
I'd be really interested to see if anyone handsome photos ofnthe Ringke Fusion case.
Sent from my SGP511 using XDA Free mobile app
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Yes I have also read that case mate barely there scratches easily. I have high hopes from ringke fusion. fingers crossed
heara said:
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Click to expand...
Click to collapse
Is the one from Brando that clear kinda sticky plastic "gel" material?
jhun80 said:
Anybody tried ringke?
cache=83468607623d9aec8d410b1e55df0e93&pi=SY200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1[/url]
Click to expand...
Click to collapse
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
joe198219 said:
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
Click to expand...
Click to collapse
Same. I'm hoping it'll fit the magnetic charger and my front and back tempered glass protectors...
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
se1000 said:
Is the one from Brando that clear kinda sticky plastic "gel" material?
Click to expand...
Click to collapse
well its more like a protector film very thin
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
erasat said:
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
Click to expand...
Click to collapse
The review left by the user wasn't too positive. I ordered this today on Amazon and cancelled it. :/
I finally got mine about 10 days ago, I really love it and to me it looks great, they thought of everything, it even fits the Dual Sim D6633, the left side flap fits perfectly on it, plus they thought of all the Magnetic chargers and even adapters out there so I kind of think that this is the most universal cover for our z3.
BUT, I left them a negative feedback on eBay simply because that's no way of working on the Customer service side, no responses to emails for weeks and after offering me a 15% discount if I kept the order active, I'm still waiting for them to rely to the email I sent dating yes and asking about how was I suppose to receive the credit.
EDIT: SOLD!!
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
danw_oz said:
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
Click to expand...
Click to collapse
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Rinke fusion case
android_fury said:
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Click to expand...
Click to collapse
True! When i got mine, i wondered why it's not as clear as I'd expected it. So i tried wiping it with my handkerchief to see if it's just some dirt or leftover adhesive from the protective film. To my shock, what i was wiping was a scratch already, and i made it even worse by rubbing it. Good thing i have the white z3 compact act so it's not too noticeable. But really disappointed with it's quality. I waited two months for this cause i live in the Philippines. Sigh. Rinke's Fusion case isn't as nice as it advertises.
UPDATE: apologies, there was a sticker on the rear panel. That's why it wasn't as clear and it easily "scratched". my phone looks okay now. Haha
You should take a look at http://aliexpress.com - it might takes 3-4 weeks to ship, but you will find literally a ton of transparent cases from 2$ (incl. shipping).
Got mine also from there - took 3.5 weeks.
Got an N6 on the way, looking for a flip case that can easily be removed. I'd like to be able to clip the phone into the case when I'm out and about, but remove it when I'm at home or at the office. Anyone have a case like this? I've done some looking but it seems like most of them are TPU cases attached to the flip cover. For my other phone I found one that clipped around the edges in only a couple of spots. I'm hoping to find something similar or at least one that can stand up to the abuse of many in/out cycles.
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Naked Sam said:
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Click to expand...
Click to collapse
Do you experience any of the button issues that the amazon reviewers had?
http://www.amazon.com/Case-Mate-Google-Nexus-Stand-Folio/dp/B00PIOTZ04
Not particularly, no. I will say they are not the best though. Theres a little bit of play to them. If you can get it cheaper than the 30-some odd dollars they charge, I'd go for it. Personally I usually carry my nexus 6 w/o a case just due to how nice it feels, although if you find a thinner, rubberized flip case let me know.
All in all, I'd give the casemate a shot. Does the job just fine.
I know you might have your reasons for wanting a flip case, but because I wanted to do the same as you (protection when out and about but naked when at home) I went with a really nice larger pouch case instead.
https://www.amazon.com/gp/aw/d/B015HD74YO/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
Sent from my Nexus 6 using Tapatalk
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I've been using this inexpensive but very form-fitting case since I bought the n6. Easy to slip it out of the case, and I've used nillkin book-type cases for multiple phones. They usually last the life the phone (for me, that's about 2 years)
http://www.amazon.com/gp/aw/d/B00RJ..._SL500_SR100,100_&refRID=0G25GYGXGH6EY90F8YAQ
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I use, and definitely have enjoyed it. I haven't had any problem with cards scratching the screen yet.
If you're still looking for a wallet themed case, you can try out this one by VENA, I have had it for 2 months and it's been great.
http://www.amazon.com/Google-Nexus-...8&qid=1449112949&sr=1-4&keywords=vena+nexus+6
I like my phones naked or as close as it comes (ultra thin transparent tpu case), but I also like to have something to put it in when out and about. My Nexus 5 was kept in a Mofi Kangaroo pouch case which was great. Unfortunately, they seemed to have stopped making them and only ever made them just about big enough for the N5. There are similar alternatives but none seem as good as the Mofi.
So, finding a removable pouch type case big enough for this beast is a challenge! I ordered a hand made fabric one from etsy which is well made, but at the size of the device, looks more like a small sleeping bag than the home of a sleek Nexus device .
So I took a bit of a gamble and ordered something not designed for the Nexus 6. Its primary advertising is for the Iphone 6+, but also states is suitable for Note 4. Looking at both devices dimensions, I concluded it was almost big enough. The Nexus being little longer, thicker and wider than both devices, but not much.
It seems to have paid off. Its a very nice luxurious pouch wallet case in genuine brown leather from what I gather is a brand owned by tuffluv. You can't tell from the site, but the phone pouch part on the side, top and bottom is elasticated so happily accommodates the Nexus's superior girth!
I can even squeeze it in with tpu case - just, but its a bit tough to pull out. Might have to seek an ultra thin tpu case - any recommendations? Without the TPU, its next to perfect! Fully loaded with cards in the card slots makes it slightly tighter to close fully, but still very acceptable in my book.
Currently its in the sale on Tuffluv site where its claimed to be a £50 case (and going by the other similar cases going for in excess of £50, I believe them!). With the sale price and discount it came to £17.99 delivered.
Just thought I'd share in case anyone else was looking for something similar but hadn't found anything labelled as suitable for the Nexus 6.
Can't paste a link but go to tuff-luv dot coms site and search for "Alston Craig Vintage Genuine Leather Wallet Case Cover Pouch for Apple iPhone 6 Plus / 6s Plus / Samsung Galaxy Note 4 - Brown"
Alston Craig have their own site, but there is a discount code for a couple of quid off on tuff-luv
Hope this helps someone.
Oh, ps, there is a small slip of paper in the packaging that states you should have a screen protector fitted to protect the screen before use. Its material lined; not the soft microfibre type, but not something I would be concerned about.
pps. Only issue I've found is the elastic straps are centred, so covers headphone and usb port. Shame, not a deal breaker for me.
Hello everyone,
I wasn't expecting to be writing this so soon if I'm honest. Expected a few more days before I got rang by my wife whilst and work and asked what I'd ordered this time.
So the Orzly Pro-Fit Tempered Glass landed in my hands today (as well as their 5 pack film set, but I'll get to that later) and since we're having issues with the Official OnePlus TGSP it made sense to remove that and get straight into this protector and find out whether it's worth you lot purchasing.
A quick disclaimer I'm writing this after applying the glass and using it for a few hours. I will keep you updated in the comments below over the next week on how it holds up.
So, how does this differ to the Official 3D screen?
- Unlike the official 3D screen, Orzly have opted for adhesive on the sides and the top but not in the middle. This was an issue with their V1 screen last year as the Dot Matrix and Oil slicks were an absolute nightmare, less so with V2. After spending a few hours with this one, I can already tell they've made some significant improvements. It feels more premium than the OP3 screen did, I can't see the dot matrix under my house lighting at all and no oil slicks.
- They have incorporated cut outs for the front facing camera and sensors. The official one just has clear glass over them.
My verdict: Buy this one.
I haven't tested many yet (infact just the official and this) but if the choice is between the two like it was last year, this one wins for me. It doesn't cut into your screen and it seems like it'll work with most cases as the fitting of it is very good.
It's also a TON cheaper than the official one and its a twin pack.
Where can I buy?
As far as I'm aware they sell on the various local Amazon sites. Two of the big ones I use are Amazon.com and Amazon.co.uk
Take a look at my video here if you want to see it in more detail:
Ordered. Thank u.
---------- Post added at 01:40 AM ---------- Previous post was at 01:30 AM ----------
Ordered. Thank u.
fracman said:
Ordered. Thank u.
---------- Post added at 01:40 AM ---------- Previous post was at 01:30 AM ----------
Ordered. Thank u.
Click to expand...
Click to collapse
No worries
Great video as usual! Thanks for sharing this! Glad I didn't pay the £18 for the official one after all the bad reports on it, waiting for my orzly one to come now!
I hope I will be able to fit it in this case
Silicone TPU bumper case
@niijonodhg you just saved me $30, thanks! I subscribed to your channel, too
Thanks for this, just confirmed what I was hoping. Another quailty product from Orzly. I still can't fathom why OnePlus made such a terrible screen protector and charged people more for it.
Ph0enix_216 said:
@niijonodhg you just saved me $30, thanks! I subscribed to your channel, too
Click to expand...
Click to collapse
Thanks
dodged a bullet there, thanks mate :good:
Hmm says won't deliver till July 20th +
Thanks!!! I'll give it a try.
I bought a clear one off amazon before this one was available. It should be here by Friday. If it fits and looks as good as yours, i'll provide a link. If not, I'll buy this one. Thank you for the review!
NightMean said:
I hope I will be able to fit it in this case
Shockproof-Silicone-Slim-Hybrid-Case-Soft-Bumper-TPU-Cover-For-OnePlus-5-3-3T
Click to expand...
Click to collapse
Be sure to let people know when you try it,. According to what the actual manufacturers are saying about them though, they have written the following...
PLEASE NOTE: The Pro-Fit Glass Screen Protector is designed to work with Orzly Cases for the Oneplus 5. We cannot however guarantee its compatibility with OnePlus 5 cases from other manufacturers
This doesn't mean that it won't fit another case, but it does mean it's risky. So probably a good idea is if anyone on here tries different cases with this screen protector that we let as many people know on here which ones fit with it versus which ones didn't, as that may be our only way to truly guage this. The Orzly screen protector definitely seems like the only tempered glass screen protector that works well with the phone, so whatever I do I'm going to need to base my case around what works with that, so the more info I could get on this, the better. (I'll probably just get one of orzly 's cases anyway at first just to be sure, but would be nice to know what all the options are for later on (if there are any)
AnabolicAndroidz said:
Be sure to let people know when you try it,. According to what the actual manufacturers are saying about them though, they have written the following...
PLEASE NOTE: The Pro-Fit Glass Screen Protector is designed to work with Orzly Cases for the Oneplus 5. We cannot however guarantee its compatibility with OnePlus 5 cases from other manufacturers
This doesn't mean that it won't fit another case, but it does mean it's risky. So probably a good idea is if anyone on here tries different cases with this screen protector that we let as many people know on here which ones fit with it versus which ones didn't, as that may be our only way to truly guage this. The Orzly screen protector definitely seems like the only tempered glass screen protector that works well with the phone, so whatever I do I'm going to need to base my case around what works with that, so the more info I could get on this, the better. (I'll probably just get one of orzly 's cases anyway at first just to be sure, but would be nice to know what all the options are for later on (if there are any)
Click to expand...
Click to collapse
I'm planning on making another video, just as soon as a bunch of cases arrive! But if someone else can get to it sooner, then please do!
Thanks a lot for the video. Nice to hear it doesn't cut into the sides of the screen like others. What's your opinion on how deep the fingerprint scanner feels in the cutout?
Seems that Orzly is shipping them from the UK... found a similar one that ships from the united states - https://www.amazon.com/s?keywords=Oneplus+5+Screen+Protector&hidden-keywords=B07378RSWD. I've used amfilm a lot before- never any issues at all.
biglilsteve said:
Thanks a lot for the video. Nice to hear it doesn't cut into the sides of the screen like others. What's your opinion on how deep the fingerprint scanner feels in the cutout?
Click to expand...
Click to collapse
I've not really noticed it, the cut out is slightly wider than the the fingerprint sensor so leaves a good gap around it.
Augman said:
Seems that Orzly is shipping them from the UK... found a similar one that ships from the united states - https://www.amazon.com/s?keywords=Oneplus+5+Screen+Protector&hidden-keywords=B07378RSWD. I've used amfilm a lot before- never any issues at all.
Click to expand...
Click to collapse
I had a small issue with the amFilm TGSP for the Nintendo Switch not staying on the Switch properly under heat. But other than that it was reasonably OK.
niijonodhg said:
I've not really noticed it, the cut out is slightly wider than the the fingerprint sensor so leaves a good gap around it.
Click to expand...
Click to collapse
Thanks sir.
Sent from my ONEPLUS A5000 using Tapatalk
niijonodhg said:
I had a small issue with the amFilm TGSP for the Nintendo Switch not staying on the Switch properly under heat. But other than that it was reasonably OK.
Click to expand...
Click to collapse
I've heard that that is from the dock. My son has the Switch and we had that issue. They sent a free replacement that worked for him. Might be worth sending an email.
So Orzly is better because it dont cut the screen like OP official tgsp?
For me i think Oneplus own is better because adhesive on entire visible part, even when it comes about 0.3mm top of sides. I have used Orzly products many years. V2 for OP3T was disappoined mostly thanks to glue on borders only. Screen wont look that clear as with tgsp with full adhesive or without tgsp at all. Also oil slick can come because adhesives only on sides. It depends how greatly you clean your screen.
Sent from my OnePlus5 using XDA Labs
Hi,
Stumbled on this Android Central article for Asus ROG phone 2 cases - Link
The first one mentioned as the staff pick looks promising.
Found the similar one on AliExpress - Link
Has anyone bought this TPU case, If yes can you give feedback or share images
qwertymk16i said:
Hi,
Stumbled on this Android Central article for Asus ROG phone 2 cases - Link
The first one mentioned as the staff pick looks promising.
Found the similar one on AliExpress - Link
Has anyone bought this TPU case, If yes can you give feedback or share images
Click to expand...
Click to collapse
I have that staff pick case, bought it on eBay. Reviewed it and a screen protector here : https://forum.xda-developers.com/rog-phone-2/accessories/tpu-case-screen-protector-ebay-t3968465
bluegizmo83 said:
I have that staff pick case, bought it on eBay. Reviewed it and a screen protector here : https://forum.xda-developers.com/rog-phone-2/accessories/tpu-case-screen-protector-ebay-t3968465
Click to expand...
Click to collapse
I've also ordered the nillkin CP+Pro tempered glass.
Have been using their tempered glasses for years. They are the best.
Can you also share images from bottom and top of the cover with phone?? And how much thickness does this cover add to the phone?
Also does it create issues in heat dissipation?
Thanks
qwertymk16i said:
I've also ordered the nillkin CP+Pro tempered glass.
Have been using their tempered glasses for years. They are the best.
Can you also share images from bottom and top of the cover with phone?? And how much thickness does this cover add to the phone?
Also does it create issues in heat dissipation?
Thanks
Click to expand...
Click to collapse
Including the 0.3mm raised lip around the phones screen, this case adds a total of 2.5mm of thickness and 3mm of width to the phone.
Measuring with my digital calipers, the phone without a case is 9.5mm thick and 78mm wide (not including the slight camera bump or the phones buttons). With the case on it measured 12mm thick and 81mm wide.
Heat dissipation is still excellent. I haven't noticed any change at all in temperatures.
bluegizmo83 said:
Including the 0.3mm raised lip around the phones screen, this case adds a total of 2.5mm of thickness and 3mm of width to the phone.
Measuring with my digital calipers, the phone without a case is 9.5mm thick and 78mm wide (not including the slight camera bump or the phones buttons). With the case on it measured 12mm thick and 81mm wide.
Heat dissipation is still excellent. I haven't noticed any change at all in temperatures.
Click to expand...
Click to collapse
Thanks for the reply, I guess you indulge in DIY projects (measuring the dimensions using digital calipers :laugh
Do you play games on this phone? Do you observe noticeable increase in temp with the cover placed?
qwertymk16i said:
Thanks for the reply, I guess you indulge in DIY projects (measuring the dimensions using digital calipers :laugh
Do you play games on this phone? Do you observe noticeable increase in temp with the cover placed?
Click to expand...
Click to collapse
Lol yup lots of DIY and 3D Printing stuff.
I play lots of games on it via emulators, and some native gaming with PUBG and the new COD Mobile. No noticable temp increases.
This one is out of this world LOL!
https://www.ebay.com/itm/ZIMON-Alum...36373735?_trkparms=ispr=1&hash=item3b37a113e7
jkeener88 said:
This one is out of this world LOL!
https://www.ebay.com/itm/ZIMON-Alum...36373735?_trkparms=ispr=1&hash=item3b37a113e7
Click to expand...
Click to collapse
I wonder how that aluminum will change reception...
i ordered imak mate/sand feel case
its 0.1mm above the screen protector but it have air bags and not slipery as transperent ones sides are more loose then the silicone transperent case
i also ordered the this fist case from android central lets see how its hold
who have best oleophobic coating on the glass?
yosef019 said:
i ordered imak mate/sand feel case
its 0.1mm above the screen protector but it have air bags and not slipery as transperent ones sides are more loose then the silicone transperent case
i also ordered the this fist case from android central lets see how its hold
who have best oleophobic coating on the glass?
Click to expand...
Click to collapse
Can you upload pictures of the same??
carnagecjb said:
I wonder how that aluminum will change reception...
Click to expand...
Click to collapse
Not sure, <Mod edit> when seeing this pic...
but what about the cooler? if I am lugging that thing around, I don't want to have to take off my case just to play a game.
jkeener88 said:
Not sure, <Mod edit> when seeing this pic...
Click to expand...
Click to collapse
Hu ? Keep calm and go discuss politics somewhere else.
THREAD CLOSED! If interested in the subject, please follow this already existing thread: https://forum.xda-developers.com/rog...-case-t3956474
Posts have been copied to the other thread.
@qwertymk16i XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse