I just rooted my Moto G6 Play today and everything seems to work fine. I've tested a couple different apps and verified that root is installed properly, but one thing thats been annoying me is that when i turn it on, i now have a black screen with "N/A" in the top left corner. It stays there for a couple seconds then goes to the boot animation (which i changed in an attempt to fix the black screen). I know with Moto when you unlock the bootloader you get a warning that lasts 5 or 10 seconds saying that your bootloader is unlocked and i assume that's what its supposed to be but it wont go away, even after trying methods of removing said (missing) Bootloader Warning.
Related
My phone was working fine earlier, sent a text off, went to write another one, pressed the search button by accident and then the screen froze, wouldnt respond to any touch at all. Tried turning the screen on and off for a bit, volume was still working etc, in the end pulled the battery. Phone restarted, managed to get it to the normal lock screen (where it had my alarm/activities for the day displayed) but again, unresponsive to touch. Pulled again a few times and the same thing happened so I decided to leave it, figured maybe the heat/humidity here (on holiday in India) had wreaked havoc with some component.
Anyways, restarted again 30 minutes later and this time couldn't get past the windows phone screen -as soon as that loaded, it reset the phone and got stuck in a neverending loop. Held up and down together and got to the screen I think is called SPL (never bothered with any of the rooting stuff)
However, the TOUCH simply says "TOUCH NONE". So obviously theres a problem there. Everything else is the same.
I tried disabling/enabling the HTC log/modem bridge but that didn't help and did a reboot and factory reset a few times but that didn't help either. Now Ive got the device hooked up to my laptop, changed from serial to USB but I don't know what (if anything) I can do in this state?
I tried earlier holding down to put it into zune mode, it completed restoring the version but then as the zune software restarted the phone, it went back into the endless cycle - the zune software was still waiting for it to reconnect again to complete the process, but obviously I couldn't get it that far.
wrublo said:
My phone was working fine earlier, sent a text off, went to write another one, pressed the search button by accident and then the screen froze, wouldnt respond to any touch at all. Tried turning the screen on and off for a bit, volume was still working etc, in the end pulled the battery. Phone restarted, managed to get it to the normal lock screen (where it had my alarm/activities for the day displayed) but again, unresponsive to touch. Pulled again a few times and the same thing happened so I decided to leave it, figured maybe the heat/humidity here (on holiday in India) had wreaked havoc with some component.
Anyways, restarted again 30 minutes later and this time couldn't get past the windows phone screen -as soon as that loaded, it reset the phone and got stuck in a neverending loop. Held up and down together and got to the screen I think is called SPL (never bothered with any of the rooting stuff)
However, the TOUCH simply says "TOUCH NONE". So obviously theres a problem there. Everything else is the same.
I tried disabling/enabling the HTC log/modem bridge but that didn't help and did a reboot and factory reset a few times but that didn't help either. Now Ive got the device hooked up to my laptop, changed from serial to USB but I don't know what (if anything) I can do in this state?
I tried earlier holding down to put it into zune mode, it completed restoring the version but then as the zune software restarted the phone, it went back into the endless cycle - the zune software was still waiting for it to reconnect again to complete the process, but obviously I couldn't get it that far.
Click to expand...
Click to collapse
Hold down the volume up and volume down at the same time while hitting the power once you see the white screen you can let go of the power; in green lettering you're going to see the SPL, for most of us its 2.05.160023. This is the bootloader screen, everything there is done by the volume toggle, no touch screen here. Your phone is stock which means you won't be flashing like we customized folks do so let's start with the SPL, what is it and by some chance is it HSPL'd?
berrywr said:
Hold down ..... etc...
Click to expand...
Click to collapse
berrywr, TOUCH NONE on SPL screen means either corrupted touch driver or dead touch screen.
Bought this phone off of ebay. HTC One X+ obviously.
Thought I'd get it to play with.
It's a Telus. I am not on Telus I'm on Tmobile
Seller described the issue and I thought I could fix it, but I haven't yet.
Problem is no matter what Rom I put on this phone it reboots when I pull the lockring. After initial reboot it loads up to a black screen and all that shows is the status bar. After a certain amount of time it will reboot again with the same result, and do this non stop until I shut the phone down.
Weird thing is I have the phone unlocked and with TWRP 2.5.0.0. for evitareul installed, but the "development warning" on the splash screen never flashes when the phone boots up.
And the phone does not display TAMPERED either only UNLOCKED.
The only thing I have been able to discover is that if I do a factory reset I can get the lockscreen image to display again, but after reboot back to black screen with only status bar.
Oh yeah right now I have ViperXL+ loaded.
Greatly appreciate anyones help!
I took Verizon's NC1 OTA about two weeks ago. This weekend, Maps kept locking up, and now that has devolved into the whole phone suddenly dying. No power off animation, just the screen goes black and the phone is off. When I attempt to boot it back up, it'll do the same sudden death bit, sometimes without even making it through the Verizon boot animation. The battery had a strong charge the first time this happened - about 70%. It will fully boot if I connect it to a power source, but it will die again after some active use off the charger. As a result of this, I'm also unable to boot into recovery. I would ultimately love to flash some other ROM as I think I may have corrupted something when I took the OTA. Battery is new-ish (or, more likely, refurbished-ish) - replaced the phone via insurance back in December.
Some additional background: I had my phone rooted two OTA's ago. When I installed the second most recent OTA (I forget which, maybe MC1?), the phone obviously unrooted, but then I also got the "Samsung Custom" boot screen with the unlocked image, which I thought odd considering it was an official OTA.
In summary: I have a phone that is rather useless unless I'm perpetually near a power source. Has anyone had a similar experience, or does any one know what the heck I can do to fix this?
It's alive
So disregard the bulk of that post. Turns out the power problem was a bad battery. I popped in the battery from the old, smashed phone and it worked like a champ.
However, I'm still stuck with the problem of not being able to boot into recovery. I'll get the same Samsung logo with the unlocked logo and "custom" at the bottom, but then the screen will go black and nothing will happen until I let go of the key sequence, at which point it'll finally boot up normally. Thoughts?
Is your phone the i9300 model? If not then ask a moderator to move it to the correct forum for you.
Sent from my GT-I9300 using Tapatalk
Okay so I am running CyanogenMod 12.1-20151114-NIGHTLY-ls9980 on my lg g3 ls9980 and it seems it takes a very long time to boot up if my phone dies, etc. Then, when my phone finally turns on, it goes to optimizing apps, all 171 of my apps have to get optimized each time... Sometimes this isn't the case but most of the times it is... Then to add to this, when booting my phone on, the pixels are perfectly slashed straight down the middle, one side of the screen being higher than the other ( i believe it's left over right)... this is on everything, including the CyanogenMod boot logo, but not the LG logo that I get before the CyanogenMod logo shows. In order to get this screen slashing to go away, I have to lock and unlock my phone about 3-4 times...
How do I fix all of this?
Cavasi said:
Okay so I am running CyanogenMod 12.1-20151114-NIGHTLY-ls9980 on my lg g3 ls9980 and it seems it takes a very long time to boot up if my phone dies, etc. Then, when my phone finally turns on, it goes to optimizing apps, all 171 of my apps have to get optimized each time... Sometimes this isn't the case but most of the times it is... Then to add to this, when booting my phone on, the pixels are perfectly slashed straight down the middle, one side of the screen being higher than the other ( i believe it's left over right)... this is on everything, including the CyanogenMod boot logo, but not the LG logo that I get before the CyanogenMod logo shows. In order to get this screen slashing to go away, I have to lock and unlock my phone about 3-4 times...
How do I fix all of this?
Click to expand...
Click to collapse
Try try fresh installing the latest nightly. By fresh I mean wipe everything except storages
Very strange problem. I have a LG G3 D855 for 1 and a half years now(rooted)
My phone was at a very low percentage, and I heared it go out. Happens to everybody, nothing strange so far.
I connected it to the charger and I turned it on, i heared the startup noise, but nothing happened. No pincode screen or unlock screen. Stuck at LG life is good screen. I actually was able to take a screenshot, i heared that sound when pressing power and volume down key. I know it is just right away from the main screen, but why is my screen freezing at startup logo? Tried to hard reset and clear all data, then I get a secure confirmation (verify) error. then my led starts to flash red and blue. Battery taking out and still no success.
How to fix this? Also screen is recognizing touch at the startup screen (when it fades away i click on it and it turns brighter)
EDIT: I blindly went into whatsapp and i am able to type and answer calls blindly wtf. Now I got a blue screen, everything is operational, the screen is blue now
Edit: I can actually blindly unlock my phone with my knock code, and hear messages coming in. The screen just freezes on life is good. I can hear it is unlocked wtf is this.