Bought this phone off of ebay. HTC One X+ obviously.
Thought I'd get it to play with.
It's a Telus. I am not on Telus I'm on Tmobile
Seller described the issue and I thought I could fix it, but I haven't yet.
Problem is no matter what Rom I put on this phone it reboots when I pull the lockring. After initial reboot it loads up to a black screen and all that shows is the status bar. After a certain amount of time it will reboot again with the same result, and do this non stop until I shut the phone down.
Weird thing is I have the phone unlocked and with TWRP 2.5.0.0. for evitareul installed, but the "development warning" on the splash screen never flashes when the phone boots up.
And the phone does not display TAMPERED either only UNLOCKED.
The only thing I have been able to discover is that if I do a factory reset I can get the lockscreen image to display again, but after reboot back to black screen with only status bar.
Oh yeah right now I have ViperXL+ loaded.
Greatly appreciate anyones help!
Related
I just unlocked the bootloader and my phone has spent 10 minutes on the first Motorola boot screen upon reboot. It's not progressing from there. "Unlocked" appears at top left, as it should.
Is this a normal boot time?
If I pull the battery and try another bootup, am I risking damage?
thanks for all you guys do.
EDIT: I went ahead & pulled the battery, and rebooted. It came back up. I'm going to go have a drink to counter this cold sweat I've been running while watching this damn phone...
My phone was working fine earlier, sent a text off, went to write another one, pressed the search button by accident and then the screen froze, wouldnt respond to any touch at all. Tried turning the screen on and off for a bit, volume was still working etc, in the end pulled the battery. Phone restarted, managed to get it to the normal lock screen (where it had my alarm/activities for the day displayed) but again, unresponsive to touch. Pulled again a few times and the same thing happened so I decided to leave it, figured maybe the heat/humidity here (on holiday in India) had wreaked havoc with some component.
Anyways, restarted again 30 minutes later and this time couldn't get past the windows phone screen -as soon as that loaded, it reset the phone and got stuck in a neverending loop. Held up and down together and got to the screen I think is called SPL (never bothered with any of the rooting stuff)
However, the TOUCH simply says "TOUCH NONE". So obviously theres a problem there. Everything else is the same.
I tried disabling/enabling the HTC log/modem bridge but that didn't help and did a reboot and factory reset a few times but that didn't help either. Now Ive got the device hooked up to my laptop, changed from serial to USB but I don't know what (if anything) I can do in this state?
I tried earlier holding down to put it into zune mode, it completed restoring the version but then as the zune software restarted the phone, it went back into the endless cycle - the zune software was still waiting for it to reconnect again to complete the process, but obviously I couldn't get it that far.
wrublo said:
My phone was working fine earlier, sent a text off, went to write another one, pressed the search button by accident and then the screen froze, wouldnt respond to any touch at all. Tried turning the screen on and off for a bit, volume was still working etc, in the end pulled the battery. Phone restarted, managed to get it to the normal lock screen (where it had my alarm/activities for the day displayed) but again, unresponsive to touch. Pulled again a few times and the same thing happened so I decided to leave it, figured maybe the heat/humidity here (on holiday in India) had wreaked havoc with some component.
Anyways, restarted again 30 minutes later and this time couldn't get past the windows phone screen -as soon as that loaded, it reset the phone and got stuck in a neverending loop. Held up and down together and got to the screen I think is called SPL (never bothered with any of the rooting stuff)
However, the TOUCH simply says "TOUCH NONE". So obviously theres a problem there. Everything else is the same.
I tried disabling/enabling the HTC log/modem bridge but that didn't help and did a reboot and factory reset a few times but that didn't help either. Now Ive got the device hooked up to my laptop, changed from serial to USB but I don't know what (if anything) I can do in this state?
I tried earlier holding down to put it into zune mode, it completed restoring the version but then as the zune software restarted the phone, it went back into the endless cycle - the zune software was still waiting for it to reconnect again to complete the process, but obviously I couldn't get it that far.
Click to expand...
Click to collapse
Hold down the volume up and volume down at the same time while hitting the power once you see the white screen you can let go of the power; in green lettering you're going to see the SPL, for most of us its 2.05.160023. This is the bootloader screen, everything there is done by the volume toggle, no touch screen here. Your phone is stock which means you won't be flashing like we customized folks do so let's start with the SPL, what is it and by some chance is it HSPL'd?
berrywr said:
Hold down ..... etc...
Click to expand...
Click to collapse
berrywr, TOUCH NONE on SPL screen means either corrupted touch driver or dead touch screen.
Hi,
I have a Sprint 4G LTE rooted with VIPER rom installed. Last night my phone freaked out, so I did the 10 second "battery pull" and it started up again. I plugged it into the charger and I fell asleep without much worry.
I woke up to find my phone stuck at the LTE splash screen of the VIPER rom. I've done the 10 second "battery pull" several times, and it doesn't just shut the phone off, it forces a reboot. Each time it only makes it as far as the LTE splash screen.
My experience with phones and computers is telling me that the OS might have gotten corrupt some how since it is stuck at the splash screen.
I do have access to the bootloader, so I have some paths I can go down, factory reset/recovery, but both those I'd like to avoid so that I do not lost the contents of my storage.
I have had VIPER rom installed for a good half year, so this issue isn't due to a new rom being flashed.
Does anyone have any suggestions?
Thanks,
-billypilgrim
When data gets corrupted, all you can do is wipe and start over. I had to do that once when running Viper as well.
Just a thought in trying to be helpful....
I used that ROM for a while myself and never really had any issues but have had a similar situation.
I pulled my sd card out and backed it all up. Replaced SD card.
Then went into recovery and reflashed the ROM.
Worked solid after that and no explanation as to why it was corrupt/hanging in a loop.
Hope this helps..
billypilgrim said:
Hi,
I have a Sprint 4G LTE rooted with VIPER rom installed. Last night my phone freaked out, so I did the 10 second "battery pull" and it started up again. I plugged it into the charger and I fell asleep without much worry.
I woke up to find my phone stuck at the LTE splash screen of the VIPER rom. I've done the 10 second "battery pull" several times, and it doesn't just shut the phone off, it forces a reboot. Each time it only makes it as far as the LTE splash screen.
My experience with phones and computers is telling me that the OS might have gotten corrupt some how since it is stuck at the splash screen.
I do have access to the bootloader, so I have some paths I can go down, factory reset/recovery, but both those I'd like to avoid so that I do not lost the contents of my storage.
I have had VIPER rom installed for a good half year, so this issue isn't due to a new rom being flashed.
Does anyone have any suggestions?
Thanks,
-billypilgrim
Click to expand...
Click to collapse
I have that happen several times. Nothing obvious that causes it. Cap'n is right need to wipe and re-flash. Here's the small trick since it just keeps rebooting on you, after you hold power for ten seconds and the screen blacks out. Make sure the capacitive buttons go out as well, that split second they go dark let go of the power button and press vol down and power to get it back into bootloader. Then you can get back in recovery to flash.
I took Verizon's NC1 OTA about two weeks ago. This weekend, Maps kept locking up, and now that has devolved into the whole phone suddenly dying. No power off animation, just the screen goes black and the phone is off. When I attempt to boot it back up, it'll do the same sudden death bit, sometimes without even making it through the Verizon boot animation. The battery had a strong charge the first time this happened - about 70%. It will fully boot if I connect it to a power source, but it will die again after some active use off the charger. As a result of this, I'm also unable to boot into recovery. I would ultimately love to flash some other ROM as I think I may have corrupted something when I took the OTA. Battery is new-ish (or, more likely, refurbished-ish) - replaced the phone via insurance back in December.
Some additional background: I had my phone rooted two OTA's ago. When I installed the second most recent OTA (I forget which, maybe MC1?), the phone obviously unrooted, but then I also got the "Samsung Custom" boot screen with the unlocked image, which I thought odd considering it was an official OTA.
In summary: I have a phone that is rather useless unless I'm perpetually near a power source. Has anyone had a similar experience, or does any one know what the heck I can do to fix this?
It's alive
So disregard the bulk of that post. Turns out the power problem was a bad battery. I popped in the battery from the old, smashed phone and it worked like a champ.
However, I'm still stuck with the problem of not being able to boot into recovery. I'll get the same Samsung logo with the unlocked logo and "custom" at the bottom, but then the screen will go black and nothing will happen until I let go of the key sequence, at which point it'll finally boot up normally. Thoughts?
Is your phone the i9300 model? If not then ask a moderator to move it to the correct forum for you.
Sent from my GT-I9300 using Tapatalk
I just rooted my Moto G6 Play today and everything seems to work fine. I've tested a couple different apps and verified that root is installed properly, but one thing thats been annoying me is that when i turn it on, i now have a black screen with "N/A" in the top left corner. It stays there for a couple seconds then goes to the boot animation (which i changed in an attempt to fix the black screen). I know with Moto when you unlock the bootloader you get a warning that lasts 5 or 10 seconds saying that your bootloader is unlocked and i assume that's what its supposed to be but it wont go away, even after trying methods of removing said (missing) Bootloader Warning.