Hi, anybody had same problem? My Pace broken while skating... I would like to change whole bottom housing but I can't find it online to buy
Anybody?
It will be very hard to find the bottom case if you lost the original piece, most probably it's easier to buy a damaged full watch somewhere as there is no special parts supplier. You can try mistore.pt and Impextron.
I had a problem with my charging pins, so I needed to get one but there was no way to find it! So I got a broken (screen) pace and just tried to use back case and it worked.
Amazfit pace EAR broken
I have same issue. Please anyone suggest me how to replace / fix it.
I am form Bangalore India, please refer service centers.
https://www.thingiverse.com/thing:3584903
https://www.thingiverse.com/thing:3540364
If you do not have an 3d Printer, you can use their service to print it. Hope it helps
Related
after a bad fall, the connector at the bottom of my xda2 was completly broken... I can't charge it any more, i disassemble my xda2 and i need to find a new connector to replace the old one.
Do you know where can i find this ? (radiospares farnell or other place and with which reference ?)
thank you very much for your help.
I'm on the same dilemma...
I'm looking for a case replacement for my MDA2 since I dropped mine and scratched it.
Let me know if you found a place where to find parts...
I even called PPCTechs.com and they told me that since unfortunately that model is not on the USA yet, it would be very unlikely to find spare parts.
Let's hope there is a place where we can fix our little friends...
and me
ive found all of one company that claims to have a very limited list of xda2 parts
http://www.pdasmart.com/pdaphone.htm $105 for a screen..
no idea of the company or if there reliable but worth a look..
I need the following immediately.
1) Volume Switch on the motherboard (Broke this while reattaching the back part of the housing)
2) Brand New Front Face Plate (Housing for the LCD)
3) Camera and Flash cover on the back
I looked around everywhere for these and haven't had much luck. Most of the ones I have found are exhorbitantly priced.
Please if anyone here has a busted wizard, then consider selling me the components listed above at a reasonable price.
i am looking for a flex . if anyone has one do please let me know
i'm looking for a new case coz mine is scratched..i have qtek 9100..if anybody know where can i get one, please contact me
Look on ebay
On my tg01 my screen does not work on the right upper corner, about 20% of the screen size. If i bend the phone, dragging the corners upwards or downwards, the screen start to work as i should for a small period of time. I must bend it very often, I'm afraid to brake it.
Does anyone know how to safe open the tg01?
What type of screwdriver should I buy?
Is there any tutorial with pictures?
Can I fix by myself the digitizer or I must replace the whole LCD?
Any tested suggestion will be hardly appreciated! Thank you!
Our TG01 has 4 Triwing screwdrivers under the battery cover, i bought a full set of these (sizes 1 - 4) but found none of them to fit so before we can open it up we need to find a triwing screwdriver or bit that fits. I think the best bet is to try one of those nintendo ds or wii triwing screwdrivers to see if those fit, i've seen loads on ebay. Keep meaning to buy one myself to try. If you manage to get those triwings off im guessing you'll next need a torx set usually sizes 5 - 10 will do for phones but you may be better off getting a full set. As for guides / tutorials on dissasembling i had a look myself but couldnt find anything.
Best of luck to you and if you manage to find a triwing that fits please share with the rest of us ;-).
Orange service is the answer
my tg01 got a new imei. the problem was the mother board, not the digitizer. they changed it in orange service. now i test the device to see if it works ok. my old dragon was network free, this one is orange locked.
My Amazfit Pace is not charging any more because of the corrosion of the pins on the back of the housing. Already opened and verified that it is charging from the inside, but with the cover/housing it doesn't. Obviously cleaning the pins won't work any more, so looking for a replacement, but with no luck. I am very satisfied with my watch and don't want to replace, so if anyone has an info please give me a valid link. Thanks. This is what I am looking for...https://www.impextrom.com/en/black-battery-housing-for-smartwatch-xiaomi-amazfit-pace-a1612-p1000029718
Actually you don't need to replace the bottom housing, you can just fill the holes with some conductive material like silver glue.
Tried that didn't work. Also looking for a cleaner and lasting solution. Thanks
Hi ttherapon, did you find a solution (or a back housing somewhere)? I am having the same problem. It will still charge, but only if I put pressure on the watch. Every time i want to charge it i have to put it under something heavy, I guess it will only get worse ...
If filling/fixing the metallic contacts doesn't work, then the problem is inside the watch, maybe simply opening and cleaning any corrosion in the internal pins will fix the problem.
Did try opening it to clean with no success. Bought contuctive glue and see what happens
Anyone found any site or have back housing for the watch?i have the same problem with the pin one dont make contact inside the watch .
I recently have broken my smartwatch screen/digitizer during training. I looked on the internet (Aliexpress, eBay) and didn't find a replacement part for it. Does anyone know how/where can I get a replacement for this screen?
Thanks.