MT6592 JTY Model N111 (KT107) Mtk_Droid_Tool stuck - root attempts failed

MT6592 JTY Model N111 (KT107) Mtk_Droid_Tool stuck - root attempts failed - Android Q&A, Help & Troubleshooting

I'm new to Android. My chinese JTY Model N111 (KT107) only has 1GB of RAM which e.g. causes choppy playback of iOS mov files.
Besides this it has lots of china chunk that can't be disabled properly
Therefore I'd like to use Roehsoft RAM-Expander (SWAP) which requires root.
My specs:
http://specdevice.com/showspec.php?id=00de-2520-ffff-fffff1109570
Mediathek MT6592, 8x ARM cortex A7 @2Ghz,
Device: Manufact JTY, Model N111 (KT107)
Kernel 3.10.72+
I'm currently trying this without success:
How to Root every MTK China Phone - Readback With SP-Flash - Root + CWM on INEW V8 [HD]
https://www.youtube.com/watch?v=s66e-kwvKUU
I could solve these problems:
- PDAnet ADB driver didn't recognize device. I used VCOM usb driver for win 10 (worked)
- Mtk_Droid_Tool_v2.5.3 didn't recognize phone, I used MTKDROIDTOOLS-FIX-1.1 from here https://forum.xda-developers.com/android/general/fix-impossible-to-start-adb-error-t3582571 (worked)
However I've the following problems:
1. Error messages
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
(see attachment)
I tried different MTKdroidtool versions from different sources, there is plenty of internal mem and SD card mem
2.
Blocks map displays create scatter file greyed out: I'm unable to create a scatter file to store my current rom on HD
3.
engineering mode: user2root missing
*#*#3646633#*#*
shows engineering mode but Log and Debugging there is user2root button!
I tried to update Engineering Mode from playstore without success
4.
A desparate trial of RootGenius_en_3.1.3 caused me an unable to root error.
--> What can I do to store my current rom on a laptop to restore it if something happens?
--> How can I gain root access for my device?
--> Is there a faster alternative to add some RAM than with Roehsoft RAM-Expander?
Thank you very much for your help!

MediaTex K107 KT107N
I am in the same boat. New to rooting, and I have this device. I have tried all sorts of tutorials and keep running into roadblocks.
At this point I am not sure if the device is rootable (most likely) and I just don't know enough to get it done, or if it is not rootable.
There is probably some key piece of information I am missing, like "oh that is the same as a such and such device, just a different name."

I have a similar bmxc k900 device (mt6582), (possibly the same thing in a slightly different chassis) i cannot root it , cannot flash it , cannot put a custom ported recovery on it , nothin

Related

[Q] Can anyone help me root a dapeng a7 mtk6573

I have a Dapeng A7 mtk6573 Android phone I just purchased. It was supposed to come prerooted but for some reason it did not and the ebay seller wont take it back or exchange it with another one that is rooted like the original item description said he would. So Im not sure where to go from here. I tried Superoneclick and didnt get very far with it. I am still new to the whole rooting process but i managed to root and rom my Evo 4g without bricking it multiple times. I can follow any directions given just need some help to be pointed in the right direction on how to get this one rooted. Can anyone help?

hi, sorry fo my english
you must download a russian modded recovery here: ge.tt/5UwovRF/v/02
you must flash it with flash tool,...(see many guide in internet if you no know)
after you must enter in it, you pull power and vol+ together,
and install this file: ge.tt/1ili71F/v/0
after you had disabled verification of signature.
so reboot your phone
Angelo
ps
i.m newbee and no can post link.. added http//

shad0w1369 said:
I have a Dapeng A7 mtk6573 Android phone I just purchased. It was supposed to come prerooted but for some reason it did not and the ebay seller wont take it back or exchange it with another one that is rooted like the original item description said he would. So Im not sure where to go from here. I tried Superoneclick and didnt get very far with it. I am still new to the whole rooting process but i managed to root and rom my Evo 4g without bricking it multiple times. I can follow any directions given just need some help to be pointed in the right direction on how to get this one rooted. Can anyone help?
Click to expand...
Click to collapse
As soon as I have some spare time I'll try to follow this
http://ciphone.fr/blog/blog1.php/rooter-son-gsm-chinois-android
But the SuperOneClick download is detected as virus, so I have downloaded it from xda-developers
Bye

merlot said:
As soon as I have some spare time I'll try to follow this
...
But the SuperOneClick download is detected as virus, so I have downloaded it from xda-developers
Bye
Click to expand...
Click to collapse
SuperOneClick does not work on my Dapeng A7. Instead I use adb remount, then adb push superuser.apk into /system/app. This works.
Please note that adb remount does not always work. I have to try a few times. Most of the time, I got success by turning USB debugging on only after I connected the phone and umount USB drive.

Dapeng A7 1gb rom custom recovery
I have good news for 1gb Dapeng A7device owner (aka e1108_v73_hjy2a7) who wants to root/backup their phone.
I just finished modding a custom recovery based on 512mb recovery by replacing original boot.img with 1gb boot.img and tested to work fine (credit to linerty for the base of 592zn.com recovery image file)
To use this, please make sure you have 1gb rom via engineer mode by typing *#*#3646633#*#* on dialpad and choose Memory > Nand Flash ... if it states
Name : KBY00U00VA_B4, ID: 0xecb3, total size 1024mb
Click to expand...
Click to collapse
then this recovery is for you.
Using 512mb recovery on 1gb device will show below error due to missing partition when boot into recovery:
E:can't mount CACHE:recovery/command
E:can't find MISC:
E:can't mount CACHE:recovery/log
E:can't open CACHE:recovery/log
E:can't find MISC:
Click to expand...
Click to collapse
here is Dapeng A7 1gb custom recovery:
http://www.4shared.com/archive/83g2LqtZ/dapeng_a7_1g_rec.html
Dapeng A7 1gb scatter file: http://www.4shared.com/office/XWtNUNVL/MT6573_Android_scatter_dapeng_.html
make sure you download both files
Use SP flash tool, load the scatter file, make sure you only tick recovery and choose the img file ... remove battery and usb cable, press download on SP flash tool ... insert battery .. then insert usb cable (you have 15 sec to do this) ... once it finish, remove and reinsert battery, hold Vol up + power to boot into recovery
-------- after booting into the custom recovery -----------
Now you can flash the uniroot2.signed.zip to root it (get it here) or make nandroid backup, flash custom zip etc. (to flash custom zip - eg: custom rom, make sure toggle signature verification to disable 1st)
512mb device (e1108_v73_hjy1) please use the custom recovery as stated here.
Note : It is advisable to make a full factory backup using mobileuncle gscript after rooting your device as stated here : http://forum.xda-developers.com/showthread.php?p=27039072
Disclaimer: please understand that I'm just trying to help and do not take any responsibilities if you brick your device. (mt6573 devices won't easily brick if you have your backup or the right factory firmware - simply run SP flash tool and overwrite for factory firmware or use recovery mode to restore backup)
ps : recovery mode is good until you mistakenly flash preloader/dsp_bl/uboot img file .. other than these 3 files, the phone should be up and working after restore.

Problems with our two DAPENG A7 and mobiles-phones.cn
Problems with our two DAPENG A7
Hello,
(sorry for my english, it's not my first language)
We bought two Dapeng A7 from mobiles-phones.cn last month. both of them failed within a month !! The first one had video bugs and could not take phtos and videos anymore (cost 26€ to return it back)
The second one has no more microphone and needs an earphone to work !!
A friend of mine just received the DAPENG A75 last week and has a flash LED problem.
So, take care with these Dapeng products wich are not reliable (we had a chinese H7300 wich was very good) at all. Don't hesitate talking about chinese phones troubles on this forum, it could be good for someone hesitating to order over there.
Bye

DAPENG A7 = MT6573
DAPENG A75 = MT6575
Please do not mix between the models. Btw, have you tried restore to factory/factory reset? maybe it's only a software bug.

Dapeng A7 1gb firmware backup
Hi all,
After going through much trouble .. I finally managed to extract Dapeng A7 1gb rom (e1108_v73_hjy2a7) in the form of img files so that others can try revive their bricked Dapeng A7 1gb phone via spflashtool.
Take note that this is only for Dapeng A7 1gb nand/rom ONLY. Please check via dialpad *#*#3646633#*#* and choose Memory > Nand Flash.
http://www.4shared.com/archive/n3y60_1L/backup_dapengA7_e1108_v73_hjy2.html
This is unrooted, untouched firmware. So if you want root, refer to my previous post on how to root using custom recovery and uniroot2signed.zip
Now I don't have the phone anymore. So I wish all the best to those who wants to revive their phone due to wrong flashing/etc.

A7 MTK6573 uboot.img
aze2learn said:
DAPENG A7 = MT6573
DAPENG A75 = MT6575
Please do not mix between the models. Btw, have you tried restore to factory/factory reset? maybe it's only a software bug.
Click to expand...
Click to collapse
I have a A7 MTK6573 Dapeng Android phone I just purchased. The smart phone Adopts A7 Android 2.3 OS and 5.0 inch capacitive multi-touch screen to make the operation smoother and more convenient. It supports WCDMA 3G and GSM network, and supports dual SIM card. Besides, it supports wireless internet, GPS navigation and can be used to watch TV and taking pictures. With complete functions and unique design, it is a good choice for 3G smart phone.
- Operating System: Android 2.3.
- Product Category: 3G smart phone.
-CPU: MTK6573 670Ghz
- RAM: 443.3MB
- ROM: 164.1MB
Network
- Frequency Band: WCDMA / GSM850 / 900/1800 / 1900MHz.
- Network Connection: GPRS, WiFi, WAP.
Display
- Screen Size: 5 inch.
- Screen Resolution: QVGA (480 × 800pixels).
- Touch Screen: Yes, capacitive touch screen.
Storage
- Built-in Memory: 164MB.
- External Memory: MicroSD / TF card up to 32GB.
Camera
- Rear Camera: Yes.
- Pixel: 8 million pixels.
- Flashlight: Yes.
- Front Camera: Yes.
Data Transfer
- GPS Navigation: Yes.
- Wi-Fi: Yes, IEEE802.11b/g/n.
- Bluetooth: Yes.
Amusement Functions
- E-book: Yes, TXT format support.
- FM: Yes.
- Built-in Game: Yes.
- Audio Format: MP3 / M4A / MID / AMR / WAV.
- Video Format: 3GP / MP4 / AVI / MPG / RMVB / WMV.
- Image Format: JPEG / BMP / GIF / PNG.
- SNS Service: Facebook, YouTube, Twitter.
- Chord Ringtone: Polyphonic / MP3 / M4A / MID / AMR / WAV.
Other Functions - Talk Time: Up to 4 hours.
- Standby Time: Up to 200 hours.
- Earphones: Yes, a wired stereo earphones with built-in MIC and clip.
- USB cable: Yes.
- Support Languages: German, Inglés, Spanish, French, Portuguese,-Package Including:
1 * Android smart phone
1 * Wired Stereo Earphones
2 * Rechargeable Li-ion Battery
1 * USB Cable
1 * Power Adapter
1 * User Manual
1 * 8GB micro sd card good phone but try root and the screen image is not stable, it seems that is not the correct uboot.img and now the screen is distorted. if someone could help would greatly appreciate it. Please upload the file uboot.img of this phone ... Thank you.

stovals said:
- Built-in Memory: 164MB.
Click to expand...
Click to collapse
Your device seems to be a 512mb device. Please use the uboot from dump here : http://ge.tt/1qRbflF/v/0?c

angelobiz said:
hi, sorry fo my english
you must download a russian modded recovery here: ge.tt/5UwovRF/v/02
you must flash it with flash tool,...(see many guide in internet if you no know)
after you must enter in it, you pull power and vol+ together,
and install this file: ge.tt/1ili71F/v/0
after you had disabled verification of signature.
so reboot your phone
Angelo
ps
i.m newbee and no can post link.. added http//
Click to expand...
Click to collapse
I confirm this works perfect on my A7 512mb :good:, I did a factory reset before flashing the ROM partially.

MT6577 camera won't work after flashing stock ROM

Hi all,
I'm quite new with android and this explains why I'm here asking for help and direction to solve a problem. I've a chinese phone based on MT6577 hw; it's branded ORDRO P550 4.1.1. Well, months ago I was able to root it but after some months it started to be unresponsive and very slow. Perhaps because I moved some software from ROM to SD in order to get more free memory. In fact, MT65xx comes out with only 512 MB of ROM/RAM. So, I found and application named MT65xx_repartition and I decided to check if it did what it promised. Basically, it claims to be able to repartition the internal memory, using phone's internal memory to increase phone's RAM.
I made a backup of what I needed and I was able to find a stock ROM of the same model from a web site.
After running the repartition program my poor phone did not start up again; it only showed the small robot wit a big exclamation mark. OK, I thiught, I've the original ROM.....let's re-flash and learn something new. After several attempts to install USB drivers on my virtual Win7/64 box I was able to re-flash the ROM again. Et voila'....it was reborn but, alas, a little bit handicapped.
First of all the IMEI was wrong or not existent so I got no carrier and secondly, the camera didn't work at all.
For the IMEI issue I was able to fix it thanks to Mobileuncle Tools (fortunately I made a backup of IMEI before proceed) but I could not find a solution for the camera.
I checked and googled everywhere and I think that it could be a driver issue...something related with libcam*.so files but I have absolutely no idea how to fix them; do I need to recompile the drivers? I checked init.rc file but I found no evidence of libcam*.so modules nor any insmod instruction to load them. I'm not really familiar with linux; I'm moving my first steps with it and the only complicate thing I did was to recompile wifi drivers for my Debian Virtual box.
Here a partial list of phone's details collected by Mobileuncle Tools:
CPU
CPU ARMv7 rev 0 (v7l)
Hardware MT6577
Kernel
Linux Version 3.4.0
OS
OS brand ORDRO
Model P550T
Bootloader unknown
Prouct e1901_v77_gq2002
Display e1901_v77_gq2002_2013.03.25
Release 4.1.1
fingerprint alps/e1901_v77_gq2002
MTK Build
.platform = MT6577
.chip_ver = S01
.wlan.chip = MT6628
The main difference between this ROM and the previous one (for completeness I forgot to download) is the ROM size; now is 878MB (?) instead of the previous one that was 493 MB.
Thanks a lot for any support or direction you can give me; I'm looking for a set of instruction to solve this problem and learn something new.
PK

MTK Droid Tools NOT able to Create Scatter File for MT6735P (iNew L4)

My purpose is to create scatter file for iNew L4 (MT6735p chipset) but MTK Droid Tools provides a grayed out button "Create Scatter File" with an error on the main connection log."TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64"
After searching a lot I tried a recommendation to use SD card and install Busybox but it was of no use as the problem persisted.
I have at least 10GB free space on Phone storage + 7 GB free space on SD card. Default write set to SD card. Installed Busybox (no-root) app from Play store (playstoredomain/store/apps/details?id=burrows.apps.busybox) because the phone is not rooted (it's not even able to root as far as I have tried various methods including root option in MTK Droid Tools).
Note: I have tried with another Infinix phone with MT6592 chipset, everything goes fine from connection to creating scatter files and backup/recovery etc. But I am only having problem with iNew L4 smartphone which has MT6735P chipset.
Also note: I have tried scatter file for MT6735m (found at various forums including xda) with iNew L4(MT6735p). When loading in SP Flash Tool it doesn't give any miss-match error during "Readback" but when reading full including userdata (according to the blocks in MT6735m scatter file), the progress stucks in between somewhere around 50%. Then I tried leaving the userdata but reading everything before it. The process created the ROM_x file successfully of about 1.6GB in size. BUT this ROM_x couldn't be used in MTK Droid Tools for processing the backup as it gave errors regarding miss-match signatures...
Can anyone please suggest something about it?
Thank you

No suggestions? Anyone...

bumb!! Still trying to find a solution...

+1
I am looking an answer to this as well.
Cubot H1 with MT6735P

Revive my dead china clone with RK3188 (rockchip-rk31sdk)_ Please Help

I'm badly need some expert advise.
.My china clone without name (rockchip-rk31sdk-WAWJMDN1KN).I decide to go ahead and try some custom rom using RKAndroidTool.
I did not realize that by cleaning IDB I will low level format..Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).There is the link to my CWM backup if may help
https://mega.nz/#!g8YgVKaa!209scxKfT...lRZ454peCCCsgU
https://mega.nz/#!gwRGhC7B!KFvTGpp4x...M2AHOKjT43VPQI
Inside that CWM backup is kernel.bin, system.bin recovery bin all
large sizes files (complete CWM of my last working tablet rk3188). Please ask me for pass to open 2x rar.
Maybe You will be able to advice me how to make proper files to revive my system from that backup I have, or help me some how to get CWM recovery working so I can use my CWM backup or any other way to make this tab back to life again.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP.
Many thanks for your kindness and time.
Adam

styropian said:
I'm badly need some expert advise.
.My china clone without name (rockchip-rk31sdk-WAWJMDN1KN).I decide to go ahead and try some custom rom using RKAndroidTool.
I did not realize that by cleaning IDB I will low level format..Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).There is the link to my CWM backup if may help
https://mega.nz/#!g8YgVKaa!209scxKfT...lRZ454peCCCsgU
https://mega.nz/#!gwRGhC7B!KFvTGpp4x...M2AHOKjT43VPQI
Inside that CWM backup is kernel.bin, system.bin recovery bin all
large sizes files (complete CWM of my last working tablet rk3188). Please ask me for pass to open 2x rar.
Maybe You will be able to advice me how to make proper files to revive my system from that backup I have, or help me some how to get CWM recovery working so I can use my CWM backup or any other way to make this tab back to life again.
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP.
Many thanks for your kindness and time.
Adam
Click to expand...
Click to collapse
UPDATE____
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.