Hi. Just broken my screen trying to replace the glass . Phone is still working , but when I connect to pc I cannot see where to touch for "connect to pc "? I think ( normaly,i get a question and I have to press allow , but screen and touch are dead ) How I can connect the phone to be able to save my photos and videos please? And also a full reset as I want to sell it for parts ( backglass , battery,mb,... Are working. I can receive calls too but I cannot answer)
Thanks
Hi....
es ist mir nicht bekannt das es eine einfache Lösung für dieses Problem gibt.
The only thing that would come to my mind is someone who also has an s6 edge asking if he would agree to give up his display in time
solong
speedson
Related
Hi Friends!
To bad - while waiting for the AP4 release - now I noticed that the internal display of my athena is broken (mechanical damage).
I'm not using the Athena any more (as phone), however I still want to use it as permanent online device (via wlan) at home (to check emails or web sites).
Does anyone know if I can update the ROM via external VGA output?
And does anybody know how much a screen replacement will cost?
Thanks!
Rudolf
I dont think, its possible. You cant send files to the VGA output
What your asking is is there anyway to upgrade, whilst outputing your display to a monitor.
I dont know if there is any settings, that keep the vga out on all the time, but even if there where you would still need to initially set it up without vga out on. so it depends what you can see on your screen if anything.
why do you need to output it at all.. once the new spl is done, you can flaash it... might be a problem setting up though.. but the flash requires no user input on the ppc itself
Rory
ibrp said:
Hi Friends!
To bad - while waiting for the AP4 release - now I noticed that the internal display of my athena is broken (mechanical damage).
I'm not using the Athena any more (as phone), however I still want to use it as permanent online device (via wlan) at home (to check emails or web sites).
Does anyone know if I can update the ROM via external VGA output?
And does anybody know how much a screen replacement will cost?
Thanks!
Rudolf
Click to expand...
Click to collapse
i have paid 237 Latvian Lats (LVL) for screen replacement
ibrp said:
Hi Friends!
To bad - while waiting for the AP4 release - now I noticed that the internal display of my athena is broken (mechanical damage).
I'm not using the Athena any more (as phone), however I still want to use it as permanent online device (via wlan) at home (to check emails or web sites).
Does anyone know if I can update the ROM via external VGA output?
And does anybody know how much a screen replacement will cost?
Thanks!
Rudolf
Click to expand...
Click to collapse
Hello, I had the same problem... I've been searching high and low without any luck... I decided to do it myself, here is what I did:
1: connect activesync
2: explore files on the device
3: go to \windows\
4: copy "Start Menu" folder (optional)
5: go into "Start Menu" and delete everything
6: copy TVOutSetting shortcut from \windows to \windows\Start Menu
7: restart device (hold power button for 5 sec (or wait for beep) then hit enter)
8:blindly, press "Start" aka windows button
9ress down arrow once since "Today" is still their, then press enter
10: press down arrow to turn on "TV out", and then press "ok" or "enter"
Voila, chances are you'll be in compsite or S-video mode, so try that or vga...
Hope it works for you, it worked for me.
Cheers,
Simon
Hi!
I am using Korand WW 2.5 and RR 2.69.21.
Got following problem:
I live in an area where there is little network coverage of my provider O2.
Normally it automatically changes to T-Mobile in cases of having connection problems. But sometimes it keeps in O2 and I have no connection at all or at least very bad voice quality.
Now I wanted to change to manually set and select my network provider and have my XDA to keep with T-Mobile. If I change this setting it works for as long as I don´t leave the cell, but as I travel around and come back home, it uses O2 again.
I was trying this behaviour with another phone (Nokia 6230) and it works like a charm. No problem at all. Stays with T-Mobile wherever I go.
So It cannot be an issue of the provider but the phone or the software on it...
Sorry for my bad english, I hope you understand my problem Couldn´t find any thread about this.
Thanks for any advice!!
Zotho said:
Hi!
I am using Korand WW 2.5 and RR 2.69.21.
Got following problem:
I live in an area where there is little network coverage of my provider O2.
Normally it automatically changes to T-Mobile in cases of having connection problems. But sometimes it keeps in O2 and I have no connection at all or at least very bad voice quality.
Now I wanted to change to manually set and select my network provider and have my XDA to keep with T-Mobile. If I change this setting it works for as long as I don´t leave the cell, but as I travel around and come back home, it uses O2 again.
I was trying this behaviour with another phone (Nokia 6230) and it works like a charm. No problem at all. Stays with T-Mobile wherever I go.
So It cannot be an issue of the provider but the phone or the software on it...
Sorry for my bad english, I hope you understand my problem Couldn´t find any thread about this.
Thanks for any advice!!
Click to expand...
Click to collapse
In the phone settings (Start->Settings->Phone) there should be a "Network" tab, you can either try the "manual" button, or click the set networks button and edit the order of networks/remove the O2 networks.
Setting it manually in the Network tab didn´t help, that´s what I tried before.
Finally I had to disable it in the available networks list. Now it seems good for now. Thanks for helping, l3v5y!!
I just wonder how to get the O2 network back, in case I need it.
Hmm, I guess I didn´t wait long enough. Though O2 is disabled in the network list, the phone has logged into O2 again... Grrr
Don´t know how to totally disable this
Hey,
I´ve a similiar Problem with the German O2.
Here I can use O2 normally- but as soon as I select manually T-Mobile, my HTC magician (XDA Mini) says, that he could not use T-Mobile, I should end all open connections first or try another provider and try again.
Same is on a HTC Touch.
In all other mobile phones it´s working great!
Andre
@ mitoheizer:
Komisch, ich kann zwar T-Online auswählen und auch O2 abschalten, aber er übernimmts wirklich nur bis zum nächsten Mal Zellwechsel oder so und kommt dann zurück zu O2. Bei Dir scheints aber was anderes zu sein, welche WindowsMobile - Version hast Du drauf?
@all
I tried the same thing with a Nokia6230 and it worked just like expected. Kept logging into the T-Mobile Network and remains there.
And I tried it with 2 different O2 SIM-Cards (got a Multicard feature). Same result Nokia works, HTC doesnt.
Maybe I give it a try and flash another software version.
Habe 2003 drauf.
O2 meint es liegt an meiner SIM Karte- kanns mir aber nciht vorstellen, da es ja in anderen handys funktioniert. Denke eher, es sind die HTC Geräte, da ein weiterer Kollege mit gleichem Gerät auch das Problem hat!
@mitoheizer
Hmm, scheint wohl wirklich an den HTCs zu liegen. Vielleicht sollte man dort mal anfragen. Ich dachte es liegt an der WindowsMobile6 Variante die ich drauf hatte hier.
Hab heute schon 3 ROMS getestet, mit keinem gehts. Ist also Hardware - Sache. Sogar mit unterschiedlichen IPLs und RADIO-ROMS gabs keine Änderung. (IPL 2.15 u. 2.20)
ok i have da elegancia series rom and i have a couple problems if ya can help me out i would really appreciated it but ok on sms ones i have more than 100 threats and i press and hold on da msg so that i can delete it it wont i have to goin the msh and delete msg bu manual untill i have less than 100 theats then i have delete it all at one time, how can i solf this problem, and also when i make a call and am trying to press on da screen it dont respond but as soon as i hang up da phone by pressing da end button not on da screen then it works... how can i solve da problem too...thanxs guys i really appreciated it
Hey...
I'm looking for an app, that will turn on my WiFi or Mobile Data (in the case the WiFi can't connect to any Hotspot) connection automatically in cycles about 30 minutes. After this "push" it should shutdown then if there is no usage of the connection for five minutes.
Please notice, that I don't need a widget for toggling the connections on my own. I need an app that is fully automatic regarding the "push" of the connection methods.
I hope to hear some good examples
puuh du fragst sachen =) aber verständlich ist ne gute idee
ich hab mal was gehört von ner app die heist tasker glaub ich da kannst du parameter für aktionen festlegen
http://tasker.dinglisch.net/
klick dich mal durch und schau ob das was für dich ist
würd mich freuen wenn ich dir helfen konnte
I'll try that app later on, but it seems that I can't do what I want to do with this app...
Do noone else have an app regarding my request? Turning WiFi / Mobile Data Connection on/off in different intervals, can't be that hard to find...
Edit: I'm looking for an app that is like this on - Auto WiFi Toggle. But sadly this app won't work for me, and there is no option for mobile data...
Hi
Not sure this will do exactly what you request, but i use 'timerrific' to enable/disable different features on my phone on different times of the day/week...
MichaelOrnsholt said:
Not sure this will do exactly what you request, but i use 'timerrific' to enable/disable different features on my phone on different times of the day/week...
Click to expand...
Click to collapse
I've tested the app a few minutes ago. It's good for other turning the vibrations, ringtones on and off... It also offers this one for WiFi. But I have to make hundreds of profils to get the function I want
Any other offers?
Sorry, haven't had the need you specify so that was my best bet...
Sent from my HTC Desire using XDA
Hello guys i need your help.
I used my phone for i while HTC HD2 and suddenly after i goed from Android 3.5 to Windows mobile 6.5 touch wont work.
All keys working display working perfectly no crashes on screen but touch wont work ? ?
Anybody can help me my dad will kill me . Please help ?
Assume the very common digitizer issue, try pressing screen near edges around end button & see if get some screen response.
Also try a hard reset or original wm6.5 inc spl & radio to help eliminate software glitch .