My phone is restarting. - LG V30 Questions & Answers

My phone is restarting again and again, I have flashed several kdz but results is same. I was trying to flash pie beta but it wasn't working then this problem happening. What is the solution??

jamey090 said:
My phone is restarting again and again, I have flashed several kdz but results is same. I was trying to flash pie beta but it wasn't working then this problem happening. What is the solution??
Click to expand...
Click to collapse
Seems you're in bootloop. You should give us some more info. Model, which KDZ, root, recovery.

Edvin73 said:
Seems you're in bootloop. You should give us some more info. Model, which KDZ, root, recovery.
Click to expand...
Click to collapse
Model: V30 Thing (H930) AT&T
KDZ: I have tried US99820H, 20A, 10C but the result is same.
My device was root before try pie beta. Bootloader is unlocked.
And don't know about recovery.
Please help me brother, I'm in real trouble.

jamey090 said:
Model: V30 Thing (H930) AT&T
KDZ: I have tried US99820H, 20A, 10C but the result is same.
My device was root before try pie beta. Bootloader is unlocked.
And don't know about recovery.
Please help me brother, I'm in real trouble.
Click to expand...
Click to collapse
Wait. EU H930 is incompatible with US998 20H.
Do you have more than one phone? Because yesterday you were all over the EU H930 Pie thread, flashing that KDZ repeatedly on your phone.
You should never flash European firmware over North American variants and vice versa.
Here a couple of weeks ago you said you have H931:
jamey090 said:
I have AT&T H931 and should I have to up the software for root the device. I have tried to root without up but didn't work.
Click to expand...
Click to collapse
So, why were you flashing EU H930 Pie on your phone yesterday? You are going to brick your phone.
If you indeed do have H931 (which seems to be the case, since you say it's "AT&T"), then you need to go back to Frankenstein and start over. Flash US998 Nougat, Master Reset, then US998 Oreo and STAY there until North American Pie is released.

ChazzMatt said:
Wait. EU H930 is incompatible with US998 20H.
Do you have more than one phone? Because yesterday you were all over the EU H930 Pie thread, flashing that KDZ repeatedly on your phone.
You should never flash European firmware over North American variants and vice versa.
Here a couple of weeks ago you said you have H931:
So, why were you flashing EU H930 Pie on your phone yesterday? You are going to brick your phone.
If you indeed do have H931 (which seems to be the case, since you say it's "AT&T"), then you need to go back to Frankenstein and start over. Flash US998 Nougat, Master Reset, then US998 Oreo and STAY there until North American Pie is released.
Click to expand...
Click to collapse
Thank you brother, but I have tried US998 nougat already but bootloop is happening. And sorry, my mistake, my phone is At&T 931

jamey090 said:
Thank you brother, but I have tried US998 nougat already but bootloop is happening. And sorry, my mistake, my phone is At&T 931
Click to expand...
Click to collapse
You need to do the Master Reset after flashing US998 Nougat to stabilize it. Until then you will get bootloop. That's why Master Reset is there.
To me, at least, it seems you aren't following the instructions.
Sent via open market LG US998 V30/V30+

ChazzMatt said:
You need to do the Master Reset after flashing US998 Nougat to stabilize it. Until then you will get bootloop. That's why Master Reset is there.
To me, at least, it seems you aren't following the instructions.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Thank you brother, 2nd-time master reset works.

Related

LG V30 US998 - Pie Update?

Hi again guys,
Do you know if the V30 US998 will get eventually the Pie update or I'll need to reconvert my V30 to H933?
Thanks for the answer!
Yes the US998 pie beta is already out so you will get it. Perhaps later than other models though
AxelR11 said:
Hi again guys,
Do you know if the V30 US998 will get eventually the Pie update or I'll need to reconvert my V30 to H933?
Thanks for the answer!
Click to expand...
Click to collapse
Of course it will get Pie. Every variant will get Pie.
Sent via open market LG US998 V30/V30+
Rahul721 said:
Yes the US998 pie beta is already out so you will get it. Perhaps later than other models though
Click to expand...
Click to collapse
Oh! I've didn't see it in the forums
Thank you! :good:
ChazzMatt said:
Of course it will get Pie. Every variant will get Pie.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Ok! Thanks for the information :good:
https://www.mylgphones.com/lg-v30-us998-android-9-pie-beta-firmware-v28a.html
redoregon said:
https://www.mylgphones.com/lg-v30-us998-android-9-pie-beta-firmware-v28a.html
Click to expand...
Click to collapse
Thanks for the link
But, if I do the update to Pie beta, can I later upgrade the beta ROM to the official one? Does the phone stay rooted with TWRP and unlocked bootloader?
Thanks for the answers!
Yes on TWRP if you pick "partition DL" on kDZ and unchecked "recovery and recovery bak" partitions (preserving TWRP recovery) OR use TWRP flashable zip created from kdz. Neither will close the bootloader. Root needs Magisk 19.4 zip flashing afterwards
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
AxelR11 said:
Thanks for the link
But, if I do the update to Pie beta, can I later upgrade the beta ROM to the official one? Does the phone stay rooted with TWRP and unlocked bootloader?
Thanks for the answers!
Click to expand...
Click to collapse
See above
LG V30 US998 Android Pie (9.0) update now available
https://www.mylgphones.com/lg-v30-us998-android-pie-9-0-update-now-available.html
asialove2013 said:
LG V30 US998 Android Pie (9.0) update now available
https://www.mylgphones.com/lg-v30-us998-android-pie-9-0-update-now-available.html
Click to expand...
Click to collapse
US998 KDZ thread is now unlocked and live.
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256/
Hello friend, I hope you are well. @ChazzMatt
I have installed us98830a beta pie in my Stock oreo us988h .... And after the update PHOTO, the phone has stuck in the logo, help please ....
I have a few hours trying to solve this error with ADB, the mobile is stuck in boot logo after trying to update US988h to US98830ft ... Please help-
Yeriorlando said:
Hello friend, I hope you are well. @ChazzMatt
I have installed us98830a beta pie in my Stock oreo us988h .... And after the update PHOTO, the phone has stuck in the logo, help please ....
I have a few hours trying to solve this error with ADB, the mobile is stuck in boot logo after trying to update US988h to US98830ft ... Please help-
Click to expand...
Click to collapse
I answered in thread. You didn't follow instructions.
You tried FOTA update with full image KDZ with TWRP custom recovery INSTALLED.
I never ever have mentioned using FOTA and I never will. I specifically say IN THE INSTRUCTIONS do NOT mess with LGUP modes not mentioned in the instructions.
I am stuck
I converted from 931 to 998 oreo 20a and when i try to upgrade to 998 pie 30a it gets stuck at boot and i have to roll back every time to 20a when it happens, ANY HELP PLEASE ?
Hashtagkem said:
I converted from 931 to 998 oreo 20a and when i try to upgrade to 998 pie 30a it gets stuck at boot and i have to roll back every time to 20a when it happens, ANY HELP PLEASE ?
Click to expand...
Click to collapse
First, there is no US998 30a. You're trying to flash US998 30b.
See the top sentence of attached screenshot. It's right there at the top of the KDZ post where found US998 30b.
If you don't want to do all the steps of the workaround, then you should do see least update to most recent Oreo US998B 20h, from the same KDZ thread you got 20a.
EDIT:
I also just answered your almost identical question in the KDZ thread, but saw this one first. The thread is a better place to ask.

US998 to H930 pie

Hello guys
I have already seen the thread that explains how to convert 20h us998 to h930 pie but i want to know if is good idea or not
Like will it cause any issues or anything
Personally I'd just wait till the US version comes out. It can't be much longer.
Sent from my LG-US998 using Tapatalk
Ali1228 said:
Hello guys
I have already seen the thread that explains how to convert 20h us998 to h930 pie but i want to know if is good idea or not
Like will it cause any issues or anything
Click to expand...
Click to collapse
Other than impatience, the only people who I see needing this are users who would like Eastern European languages.
You have to make sure you omit three partitions or it will mess up your phone:
modem, xbl, xbl 2,
And then every time you do an update, you have to remember to again omit those three partitions. Like when EU H930 Pie 30c KDZ comes in a month or so, you can NOT choose "Update"! Or "Refurbish". Or you will have a bad day.
Every time you have to choose Partition DL and specifically omit those three partitions which are not compatible with US998.
For people who are just impatient for US998 Pie, hopefully it will come before EU H930 30c KDZ is released, but for people who are using this conversion trick on a permanent basis, they have to remember that.
It IS a neat trick, as long as you remember the caveats.
just don't do it it's unsafe
kenbo111 said:
Personally I'd just wait till the US version comes out. It can't be much longer.
Sent from my LG-US998 using Tapatalk
Click to expand...
Click to collapse
ChazzMatt said:
Other than impatience, the only people who I see needing this are users who would like Eastern European languages.
You have to make sure you omit three partitions or it will mess up your phone:
modem, xbl, xbl 2,
And then every time you do an update, you have to remember to again omit those three partitions. Like when EU H930 Pie 30c KDZ comes in a month or so, you can NOT choose "Update"! Or "Refurbish". Or you will have a bad day.
Every time you have to choose Partition DL and specifically omit those three partitions which are not compatible with US998.
For people who are just impatient for US998 Pie, hopefully it will come before EU H930 30c KDZ is released, but for people who are using this conversion trick on a permanent basis, they have to remember that.
It IS a neat trick, as long as you remember the caveats.
Click to expand...
Click to collapse
Seriously man you are a life saver
I guess i wil lstick to us998 and wait for pie kdz or twrp flashable zip
ChazzMatt said:
Other than impatience, the only people who I see needing this are users who would like Eastern European languages.
You have to make sure you omit three partitions or it will mess up your phone:
modem, xbl, xbl 2,
And then every time you do an update, you have to remember to again omit those three partitions. Like when EU H930 Pie 30c KDZ comes in a month or so, you can NOT choose "Update"! Or "Refurbish". Or you will have a bad day.
Every time you have to choose Partition DL and specifically omit those three partitions which are not compatible with US998.
For people who are just impatient for US998 Pie, hopefully it will come before EU H930 30c KDZ is released, but for people who are using this conversion trick on a permanent basis, they have to remember that.
It IS a neat trick, as long as you remember the caveats.
Click to expand...
Click to collapse
So say someone has a lg v30+ and flashed eu h930 pie. Clearly didnt read enough and had no interent while on eu pie. Decided to go back to Havoc (without backing up radio/modem). Assuming I need to reflash radio from us998 version, what would be the easiest way?
Would I need to downgrade back to oreo or just extract radio from us998 rom and flash.
intruda119 said:
So say someone has a lg v30+ and flashed eu h930 pie. Clearly didnt read enough and had no interent while on eu pie. Decided to go back to Havoc (without backing up radio/modem). Assuming I need to reflash radio from us998 version, what would be the easiest way?
Would I need to downgrade back to oreo or just extract radio from us998 rom and flash.
Click to expand...
Click to collapse
So, you are saying that person didn't omit the three partitions when flashing, but instead flashed all partitions (modem, xbl, xbl 2,) and now they have no working radio? Or do they also have bootloops with no radio?
I also added a warning a couple of days ago to all the Pie KDZ threads I maintain to NOT to update to Pie at this point in time if you wish to install AOSP/Lineage ROMs:
tech_infinity said:
@ChazzMatt can you the following warning/disclaimer to the first post:
If you flash pie KDZ then AOSP ROMs like LOS, RR, havoc won't work properly. Even if you flash Oreo KDZ and then flash AOSP ROMs, the camera and flashlight won't work on enforcing but will work on permissive. But even on permissive a few sensors other than the camera may not work. This will be the case until AOSP ROMs with Pie blobs come.
Click to expand...
Click to collapse
You would need to go back to US998 Oreo, which I would do via Refurbish mode in Dev Patched LGUP.
But if you then want to run Havoc, you may have to use the steps in this thread:
[GUIDE] Booting AOSP after stock Pie (US998 tested only)
https://forum.xda-developers.com/lg-v30/how-to/guide-booting-aosp-stock-pie-us998-t3954155
Good luck!
ChazzMatt said:
So, you are saying that person didn't omit the three partitions when flashing, but instead flashed all partitions (modem, xbl, xbl 2,) and now they have no working radio? Or do they also have bootloops with no radio?
I also added a warning a couple of days ago to all the Pie KDZ threads I maintain to NOT to update to Pie at this point in time if you wish to install AOSP/Lineage ROMs:
You would need to go back to US998 Oreo, which I would do via Refurbish mode in Dev Patched LGUP.
But if you then want to run Havoc, you may have to use the steps in this thread:
[GUIDE] Booting AOSP after stock Pie (US998 tested only)
https://forum.xda-developers.com/lg-v30/how-to/guide-booting-aosp-stock-pie-us998-t3954155
Good luck!
Click to expand...
Click to collapse
Yeah everything booted and worked perfectly on pie except the radio. I swear I searched before flashing but going forward was based off h930 and not converted us998.
My fault but couldn't kill this phone if I tried. Luckily it's my backup but my soon get some usage. Thanks as always.
Yes, the H930_30B pie works fine as a WiFi tablet for US998-20H. If you omit the 3 partitions (XBL, XBL2, and Modem), then GSM radio works. CDMA radio still dead though. Thus, for GSM users, go for it but CDMA users, best stick with beta pie 28A or wait for official PIE KDZ
ChazzMatt said:
So, you are saying that person didn't omit the three partitions when flashing, but instead flashed all partitions (modem, xbl, xbl 2,) and now they have no working radio? Or do they also have bootloops with no radio?
I also added a warning a couple of days ago to all the Pie KDZ threads I maintain to NOT to update to Pie at this point in time if you wish to install AOSP/Lineage ROMs:
You would need to go back to US998 Oreo, which I would do via Refurbish mode in Dev Patched LGUP.
But if you then want to run Havoc, you may have to use the steps in this thread:
[GUIDE] Booting AOSP after stock Pie (US998 tested only)
https://forum.xda-developers.com/lg-v30/how-to/guide-booting-aosp-stock-pie-us998-t3954155
Good luck!
Click to expand...
Click to collapse
Sorry to bother. Can't get refurbished to work. Keep getting we error code. Any help much appreciated.
intruda119 said:
Sorry to bother. Can't get refurbished to work. Keep getting we error code. Any help much appreciated.
Click to expand...
Click to collapse
Use "dual mode" LGUP on H930-30B flash OP https://forum.xda-developers.com/lg-v30/development/h930-lg-v30-european-market-t3951898
intruda119 said:
Sorry to bother. Can't get refurbished to work. Keep getting we error code. Any help much appreciated.
Click to expand...
Click to collapse
You have to use the newer Dev Patched LGUP that's in the H930 Pie KDZ thread. Also now listed in the Frankenstein thread. It's newer than the one listed in the Oreo KDZ threads and the one formerly listed in the Frankenstein thread.

US998 30a

Hello guys
I was just going through the site and came across this
https://www.mylgphones.com/lg-v30-us998-android-9-pie-beta-firmware-v28a.html?amp
This has an link to 30a us998 in .up format
Anyone tried it out or not?
Ali1228 said:
Hello guys
I was just going through the site and came across this
https://www.mylgphones.com/lg-v30-us998-android-9-pie-beta-firmware-v28a.html?amp
This has an link to 30a us998 in .up format
Anyone tried it out or not?
Click to expand...
Click to collapse
Yes. Needs older LGUP single mode and freshly kdz 20h to work
HueyT said:
Yes. Needs older LGUP single mode and freshly kdz 20h to work
Click to expand...
Click to collapse
I currently have rooted 20h us998 will fota upgrade work or not
 @ChazzMatt might know something about it
Ali1228 said:
I currently have rooted 20h us998 will fota upgrade work or not
@ChazzMatt might know something about it
Click to expand...
Click to collapse
Probably but safest is freshly kdz 20h
HueyT said:
Probably but safest is freshly kdz 20h
Click to expand...
Click to collapse
Also if you have already installed can u tell me if the ram management is fixed or not
Thanks btw
Ali1228 said:
Also if you have already installed can u tell me if the ram management is fixed or not
Thanks btw
Click to expand...
Click to collapse
RAM management sucks so I use OP5-AKT tweaks and custom kernel AK3-Tachyon-PIE-Refurbish1 by Darkdiz (count Dracula on Telegram)
BTW I have a H931->US998 and although @ChazzMatt says a US998 is a US998, my attempts at FOTA Upgrade flashing to 30a have all failed. I've tried 3 times and they all got stuck booting and had to go back to 20h.
​
RickyShade said:
BTW I have a H931->US998 and although @ChazzMatt says a US998 is a US998, my attempts at FOTA Upgrade flashing to 30a have all failed. I've tried 3 times and they all got stuck booting and had to go back to 20h.
Click to expand...
Click to collapse
I have thought about it i will w8 for kdz or twrp flashable zip
RickyShade said:
BTW I have a H931->US998 and although @ChazzMatt says a US998 is a US998, my attempts at FOTA Upgrade flashing to 30a have all failed. I've tried 3 times and they all got stuck booting and had to go back to 20h.
Click to expand...
Click to collapse
I've never used FOTA on LGUP, so don't know about that. I've used Upgrade and Refurbish modes on Dev Patched LGUP.
Also works with US998 converted from LS998.
Just wait for KDZ. The OTA hasn't even been officially released. So until it is, it's still technically beta or Release Candidate.
Once it's officially released, the KDZ will soon follow.
how to update 28a to 30a on US998
ChazzMatt said:
I've never used FOTA on LGUP, so don't know about that. I've used Upgrade and Refurbish modes on Dev Patched LGUP.
Also works with US998 converted from LS998.
Just wait for KDZ. The OTA hasn't even been officially released. So until it is, it's still technically beta or Release Candidate.
Once it's officially released, the KDZ will soon follow.
Click to expand...
Click to collapse
Hello! please is there a way to update from 28a to 30a? My US998 keeps rebooting randomly. Thanks!
danywalkert said:
Hello! please is there a way to update from 28a to 30a? My US998 keeps rebooting randomly. Thanks!
Click to expand...
Click to collapse
Kdz us99820h refurbish and stay stock without root 1st before trying to fota to us99830a
HueyT said:
Kdz us99820h refurbish and stay stock without root 1st before trying to fota to us99830a
Click to expand...
Click to collapse
Thanks already done that but I'll remain on 20h and enjoy the stability for a while.
Has anyone re-uploaded or mirrored this yet, the op link has been downloaded too many times and I can't find any other mention of this that doesn't link directly back to this upload.
I'll upload a Google drive Link
KillKount said:
Has anyone re-uploaded or mirrored this yet, the op link has been downloaded too many times and I can't find any other mention of this that doesn't link directly back to this upload.
Click to expand...
Click to collapse
Hello, is there a download limit?
Us998_30b is now avail as FOTA up file (from 20h). Join LG v30 Telegram for link
https://t.me/LGEV30
HueyT said:
Us998_30b is now avail as FOTA up file (from 20h). Join LG v30 Telegram for link
https://t.me/LGEV30
Click to expand...
Click to collapse
Thus confirming US998 30a was beta/Release Candidate and which was deemed not good enough to be official Pie KDZ. Same thing happened with EU H930 30a -- and LG should have not even released the buggy EU H930 30b, which became official Pie but which they soon pulled from their servers.
ChazzMatt said:
Thus confirming US998 30a was beta/Release Candidate and which was deemed not good enough to be official Pie KDZ. Same thing happened with EU H930 30a -- and LG should have not even released the buggy EU H930 30b, which became official Pie but which they soon pulled from their servers.
Click to expand...
Click to collapse
So i should fota 30b or not?
Ali1228 said:
So i should fota 30b or not?
Click to expand...
Click to collapse
It's up to you. I'm staying on stable Oreo until Pie is officially released -- which for US998 means the full image KDZ is released to the public.
Also, I'm running Anxious V30 mod and she's not updating that mod for Pie until Verizon V30 gets Pie.
Enables:
All Lockscreen Weather Animations, Anxious Kernel Script, Custom/V50 App Profiles, DTS:X 3D Surround, Dual Speaker for North American Variants, Falsified Advanced DAC Mode, G7/V40/V50 Camera Features (Updated Camera App, Updated Gallery App, Google Lens, Super Bright Mode, Updated AI & Filter Data), Google Phone (stable), Google Sans, JoyPixels 5.0, LG Equalizer Settings (w/ Custom EQ), Pixel Roboto & Various Other Fonts, Pixel WiFi Mod, Razer Phone 2 Nova Launcher, US GPS Config, YouTube Vanced (Black);
Click to expand...
Click to collapse
Point is, what does this 30b Pie beta give me in return for discarding all those features?

LG v35 isai ... japanese lg v30+ modem problem

I have an unlocked lg v35 isai with unlocked sim but I tried to flash it with H930 kdz to unlock bootloader everything is working except that no signal ....
I tried to flash us998 but no sucess keep restarting .
I need help anyone has lg v35 isai firmware or modem please share it
For anyone wondering YES he does have a V30+. Just for some reason in Japan, instead of US998, LS998, H930, whatever, they called theirs "LG V35". Which is totally confusing as a few months later LG released ANOTHER phone called LG V35.
Their version of the V20 was called "V34"
Their version of the V30 then is the V35.
See here:
https://forum.xda-developers.com/showpost.php?p=77581027&postcount=3
Also here:
https://www.lg.com/jp/mobile-phone/lg-LGV35
You can tell it's really V30+, because it says so and specs show Snapdragon 835.
karimppo said:
I have an unlocked lg v35 isai with unlocked sim but I tried to flash it with H930 kdz to unlock bootloader everything is working except that no signal ....
I tried to flash us998 but no sucess keep restarting .
I need help anyone has lg v35 isai firmware or modem please share it
Click to expand...
Click to collapse
Your modem uses WiMax?
http://phonedb.net/index.php?m=devi..._v30plus_wimax_2plus_128gb_lgv35__lg_joan_qvr
ChazzMatt said:
Your modem uses WiMax?
Click to expand...
Click to collapse
may be ... I tried US998 nougat then oreo but no success ..... read sim card but no signal
I managed to unlock bootloader and flash twrp successfully on h930 pre-july
everything working on h930 pie except signal
keep rebooting on US998 nougat or oreo
Any idea is appreciated
karimppo said:
I managed to unlock bootloader and flash twrp successfully on h930 pre-july
everything working on h930 pie except signal
keep rebooting on US998 nougat or oreo
Any idea is appreciated
Click to expand...
Click to collapse
Well, you can flash a V35 isai kdz and see if it restores your signal.
Put your imei here and see if it find your firmware https://lg-firmware-rom.com/
mateus.sc said:
Well, you can flash a V35 isai kdz and see if it restores your signal.
Put your imei here and see if it find your firmware https://lg-firmware-rom.com/
Click to expand...
Click to collapse
I tried searching with Google for their firmware and couldn't find it posted anywhere. No, I didn't use that resource because I don't have their IMEI. But I wonder if ISAI is like AT&T and Sprint and don't publicly release KDZ?
But hopefully your suggestion will work for them!
ChazzMatt said:
I tried searching with Google for their firmware and couldn't find it posted anywhere. No, I didn't use that resource because I don't have their IMEI. But I wonder if ISAI is like AT&T and Sprint and don't publicly release KDZ?
But hopefully your suggestion will work for them!
Click to expand...
Click to collapse
I searched too and found nothing
if IMEI search dont't work, then he will have to try buying the kdz on lg.bbs.
unfortunately I flashed h932 and ended with qualcomm 9008 error.. but I managed to buy another lg v35 isai ... can I take firmware from the new one?? but the problem now that the old one not entering download mode now
karimppo said:
unfortunately I flashed h932 and ended with qualcomm 9008 error.. but I managed to buy another lg v35 isai ... can I take firmware from the new one?? but the problem now that the old one not entering download mode now
Click to expand...
Click to collapse
You flashed T-mobile H932 firmware over your ISAI v30+? Yeah, you bricked it. Many warnings that T-mobile H932 has different RSA encryption from any other V30. You would need to contact some eBay guy that can fix that.
karimppo said:
unfortunately I flashed h932 and ended with qualcomm 9008 error.. but I managed to buy another lg v35 isai ... can I take firmware from the new one?? but the problem now that the old one not entering download mode now
Click to expand...
Click to collapse
Gosh nooo H932 is the TMobile V30 and it's the only variant that will hardbrick with crossflashing. You can contact @motogvasyag since he knows how to fix this error using remote access to your PC and device. Talk to him and check if him supports your device.
mateus.sc said:
Gosh nooo H932 is the TMobile V30 and it's the only variant that will hardbrick with crossflashing. You can contact @motogvasyag since he knows how to fix this error using remote access to your PC and device. Talk to him and check if him supports your device.
Click to expand...
Click to collapse
I get another lg v30 isai... Can I extract firmware from it and flash it to the old one to mget signal back
After fixing qualcomm mode and entering download mode
Now I can enter download mode and have another lg v30 isai...how can I take firmware from the new one and flash it to old one
karimppo said:
Now I can enter download mode and have another lg v30 isai...how can I take firmware from the new one and flash it to old one
Click to expand...
Click to collapse
Maybe Dev Patched LGUP "dump"? I've never used it myself, but it's there's in the options.
https://www.mylgphones.com/how-to-g...errer=https://www.google.com&amp_tf=From %1$s
I made dump from new lg v30 isai but I dont know how to flash it to old v30
Again everything is working except signall
karimppo said:
I made dump from new lg v30 isai but I dont know how to flash it to old v30
Click to expand...
Click to collapse
If you look at the link it shows you downloaded various partitions like modems. You should be able to use Partition DL mode to install those partitions through LGUP?
partition dl cant flash separate image only kdz or tot message appear when try to flash modem in partition dl
I too made an LG UP dump of all partitions on my H932 long ago, but I don't think there is a way to flash those dump files back with LG UP. If there is, I'd love to know.
I believe they can be turned into TWRP flashable zip files, but that's another matter.

The touch does not work after installing h930 pie KDZ on us998 converted

Hello friends, I do not know if I have really damaged my phone. It is the h931 model converted to us998. Because of my desire to have a foot, I installed a KDZ of the European model h930. At the beginning the rom started without problems, after I noticed that it had no signal, I installed the Oreo us998 modem and it was still without a signal, so I went back to oreo us99820h and when it starts the screen it is welcome, the touch does not work for me. Any solution to this problem, I would appreciate suggestions and help. Thank you so much ♥
Yeriorlando said:
Hello friends, I do not know if I have really damaged my phone. It is the h931 model converted to us998. Because of my desire to have a foot, I installed a KDZ of the European model h930. At the beginning the rom started without problems, after I noticed that it had no signal, I installed the Oreo us998 modem and it was still without a signal, so I went back to oreo us99820h and when it starts the screen it is welcome, the touch does not work for me. Any solution to this problem, I would appreciate suggestions and help. Thank you so much ♥
Click to expand...
Click to collapse
You screwed up.
NEVER NEVER NEVER flash stock H930* firmware over any North American variants. It says so in all the Instructions.
You ignored all warnings. WHY? Every Pie H93O* KDZ and TWRP flashable zip says "ONLY for H930, H930G, H930D, H930DS. Do NOT ask if others can flash this!"
Flash back to US998 Nougat to repair your damage. PARTITION DL, all partitions in Dev Patched LGUP.
Then use one of the 4 workarounds in post #6 of the US998 PIE KDZ thread to update to US998 Pie.
Did you not read about those? They are mentioned top of post #2. Go to Post #6 of the US998 Pie KDZ. Workaround #3 and #4 work for everyone. Two people yesterday said #4 worked for them.
Here's one:
sisiimaji said:
This is great, I have follow Method #4 it works very well, I've been waiting for so long to achieved it . :good:
Click to expand...
Click to collapse
Go to first page and scroll down to post #6...
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256
same problem
ChazzMatt said:
You screwed up.
NEVER NEVER NEVER flash stock H930* firmware over any North American variants. It says so in all the Instructions.
You ignored all warnings. WHY? Every Pie H93O* KDZ and TWRP flashable zip says "ONLY for H930, H930G, H930D, H930DS. Do NOT ask if others can flash this!"
Flash back to US998 Nougat to repair your damage. PARTITION DL, all partitions in Dev Patched LGUP.
Then use one of the 4 workarounds in post #6 of the US998 PIE KDZ thread to update to US998 Pie.
Did you not read about those? They are mentioned top of post #2. Go to Post #6 of the US998 Pie KDZ. Workaround #3 and #4 work for everyone. Two people yesterday said #4 worked for them.
Here's one:
Go to first page and scroll down to post #6...
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256
Click to expand...
Click to collapse
Hello friend, thank you very much, method #4 worked perfectly for me. The problem is that the touch still does not respond .... Too bad!
woww.. It would be taking him to a technician or something. I didn't want to lose my phone that way.
Yeriorlando said:
Hello friend, thank you very much, method #4 worked perfectly for me. The problem is that the touch still does not respond .... Too bad!
woww.. It would be taking him to a technician or something. I didn't want to lose my phone that way.
Click to expand...
Click to collapse
Try temporarily flashing back to US998 Nougat via Partition DL mode, all partitions. See if that fixes touch. Then update to US998 Pie again.
same problem
ChazzMatt said:
Try temporarily flashing back to US998 Nougat via Partition DL mode, all partitions. See if that fixes touch. Then update to US998 Pie again.
Click to expand...
Click to collapse
The problem remains the same, brother. I just flashed Nougat and nothing.
Yeriorlando said:
The problem remains the same, brother. I just flashed Nougat and nothing.
Click to expand...
Click to collapse
I'm almost out of answers. All I can suggest is Partition DL to H933 Nougat. Temporarily. See if that works, then back to US998 Nougat, then update back to US998 Pie.
Is it possible your digitizer just happened to fail same time you were doing all this?
same problem
ChazzMatt said:
I'm almost out of answers. All I can suggest is Partition DL to H933 Nougat. Temporarily. See if that works, then back to US998 Nougat, then update back to US998 Pie.
Is it possible your digitizer just happened to fail same time you were doing all this?
Click to expand...
Click to collapse
Exactly, I think that by flashing that KDZ h930, some file or something that handles the hardware of the screen has broken.
fff
ChazzMatt said:
I'm almost out of answers. All I can suggest is Partition DL to H933 Nougat. Temporarily. See if that works, then back to US998 Nougat, then update back to US998 Pie.
Is it possible your digitizer just happened to fail same time you were doing all this?
Click to expand...
Click to collapse
Hello Friend. I've been thinking and well, could you tell me that a "Dump" file,? Could you solve the problem with that or is it more risky?
Yeriorlando said:
Hello Friend. I've been thinking and well, could you tell me that a "Dump" file,? Could you solve the problem with that or is it more risky?
Click to expand...
Click to collapse
Never used Dump file, so don't know. That's a function of LGUP where you can theoretically restore original partitions if you have a "dump" prior to making any changes. You've already made changes.

Categories

Resources