Redmi Go Vibrating Brick - Android Q&A, Help & Troubleshooting

Is there a way to force a connection to your smartphone when it wont register a connection to adb or fastboot commands? I do have the correct drivers and previously had my Tiare rooted so no issues there. Unfortunately I truly wish that the problem was the Penguin appearing on the screen because least at that stage it will still grant a fastboot connection. As of now it just will vibrate when boot keys are held down once every 7 or 8 seconds whether it be the fastboot mode keys pressed or the recovery keys. But there is no interaction between the devices. If anyone can help me access my phone again i would truly appreciate it..
thanks

Related

[Q] PleASE HELP. How to enter twrp from computer

i soft bricked my phone when installing the cyanangen 12 rom, it quit during the setup wizzard. The button combination of down and power release when seeing lg and repressing is not working. PleASE TELL ME i can enter twrp without having to restore my phone to stock. The phone will receive phone calls but that is all it does. otherwise it says setup wizzard quit and endlessly says this when you press ok. please help, despite being in los angeles, i have not found anybody capable of helping me.
Patrick--in so much need...
What is the repressing step? I've never heard of that. Isn't it just vol down and power, then release power while still holding vol down until recovery boots?
Also, do you have adb or fastboot installed on a pc? If so, adb reboot recovery from CMD if in android, or fastboot reboot recovery if in bootloader. Have you tried those?
patrick73csun said:
i soft bricked my phone when installing the cyanangen 12 rom, it quit during the setup wizzard. The button combination of down and power release when seeing lg and repressing is not working. PleASE TELL ME i can enter twrp without having to restore my phone to stock. The phone will receive phone calls but that is all it does. otherwise it says setup wizzard quit and endlessly says this when you press ok. please help, despite being in los angeles, i have not found anybody capable of helping me.
Patrick--in so much need...
Click to expand...
Click to collapse
You don't have to release the buttons, idk why so many people keep saying this. Should be the same as mine.. With the phone off just hold both power and volume down until you see it say Recovery Mode loading, then release. If that doesn't work then try the adb command while plugged in to your computer.
Barshalen said:
You don't have to release the buttons, idk why so many people keep saying this. Should be the same as mine.. With the phone off just hold both power and volume down until you see it say Recovery Mode loading, then release. If that doesn't work then try the adb command while plugged in to your computer.
Click to expand...
Click to collapse
Yup. Thats the same thing i was wondering. I had to use it last night. Just hold both. Easy.
Sent from rotary technology Phone
"Also, do you have adb or fastboot installed on a pc? If so, adb reboot recovery from CMD if in android, or fastboot reboot recovery if in bootloader. Have you tried those? "-----------
How do you get into bootloader if phone is bricked? It sees the phone, but it won't open up and let me look inside? Thank you
A window comes up and says that the kernal cracked.. My phone is having a hard time getting charged, could this be related?

[Q] Access Pictures with broken screen

Hi,
First of all: I have already read a lot of threads about this topic, but none of them was able to help me so far.
I have a broken Galaxy S3 (GT-I9300). The screen doesn't work anymore. And when I say it does not work, I mean it: Nothing is displayed and it doesn't react to touch gestures any more, it is completely dark. Nevertheless my phone still works. The LED lights up, when I turn on the phone and my computer recognizes the phone. But I am not able to access the data on my phone as it is locked. I already removed the SIM Card to avoid being prompted to enter the PIN, but there is still the screen lock, which i can not pass.
Unfortunatelly I have USB Debugging disabled, so I can not access it via ADB. When i type adb shell the response is just "device not found" and (surprise surprise) when i type adb devices the list is empty.
Is there a way to get my phone to work with ADB again? Tried to start it in recovery mode with Volume Up, Home Button and Power, but that didn't work out either.
I am grateful for every hint
Cheerio
Buntspecht

My phoned is dead and i dont know why!

So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe

EMERGENCY (not histeric)Password not recognized on Xiaomi Redmi Note 3 -Fastboot mode

Hi there XDA community,
I am turning to you with a specific question that I have regarding the issue with my Xiaomi Redmi Note 3 from 2/2017.
I had an accident where the phone fell on the side directly on the Volume Down button and it was constantly pressed in. I used to have issues with waking up my screen as it would automatically switch off if I didn't press the Volume Up and Back buttons simultaneously. Otherwise the phone is still in full working condition and I managed to unstuck the Volume Down button since.
When I ended one phone call, the black screen wouldn't turn on no matter what, so I got frustrated and played with the buttons and entered the Fastboot mode. I didn't do anything there so I just left and turned the device back on normally.
I was prompted to enter my password, which is always the same 4 charachter all-numbers code and it wouldn't get recognized by the phone no matter what. I am sure I typed it in correctly.
Ever since, I have been locked out of the phone and am looking for options to gain access to it.
The Android Device Manager is of no help, I do not have any Forget Password buttons, my bootloader is locked as far as I know because I didn't change anything there and the USB debugging is disabled.
Do I stand any chance of accessing my data without losing it, perhaps with use of some special software tool or passcode remover?
I don't know exactly what my firmware is, but it probably is MIUI 8 or 7.
Thank you very much for your help and advice!
Wish you to end 2017 being your bestself possible!
Odinlo
Did you tried this ?
http://en.miui.com/thread-292962-1-1.html
Hey,
the Android Device Manager is of no use because the phone is too new to change the password.
Also the recovery mode is inaccessible because the bootloader is locked any my USB debugging is not enabled.
Can you help yourself with the Fastboot mode in any way?
Also, I don't understand why something like this would happen and what is the password now that the device demands.
Do you know of any software tool that would recover all the data after restoring the phone and deleting all the data?
Thank you very much!
Odinlo said:
Hey,
Do you know of any software tool that would recover all the data after restoring the phone and deleting all the data?
Thank you very much!
Click to expand...
Click to collapse
Wait , what kind off lock is on your device ?
1. Pattern lock
2. MiAccount Lock
3. Lock Screen Password
Here is a tool to remove password :
https://mega.nz/#!10UDXQTI!sZb9wjh07rGAsSbE2YpOWyuu-0Vi4fujbHvSTnyz_I8
Warning!!! I didn't check file against viruses so do check .
How to use:
https://www.youtube.com/watch?v=eDb9BNLmiJ4
Hi Teddy Lo,.
thanks for help, I really appreciate it. It is the Lock screen password on the device

Bootloop every 8 seconds, even in recovery mode and fastboot

Facts:
- Pocophone F1 is in an endless boot loop. Every 8 seconds it reboots itself.
- Recovery mode and Fastboot are reachable, but this doesn't stop the boot loop.
- I have never used a custom rom
- The bootloader is unlocked (ADB confirms this), USB debugging is enabled, but OEM unlocking is NOT enabled.
History:
The problems started after a regular update (I had never put a custom rom on the phone). The phone became unstable, constantly restarting itself. Sometimes restarting quickly, sometimes after a few minutes (reaching Android). I tried to unlock the bootloader, by tapping 7 times on MIUI Version, enabling USB Debugging [I did not enable OEM unlocking unfortunately...] and run the flashtool. The flashtool reported that the phone was unlocked. And after restarting, the phone reports to be unlocked. ADB confirms this too. But after unlocking the phone, it never ever again reached to Android, restarting itself always after exactly 8-9 seconds. I can get into recovery mode and fastboot, but it will still restart. In Fastboot, my pc recognizes the phone as an Android Phone. Is there a magical way to get out of this loop?
Similar thing happened to twice. My power button was kinda stuck (not noticeable to eyes thoughts). Flicking onto the power button real hard solved the issue.
lockhrt999 said:
Similar thing happened to twice. My power button was kinda stuck (not noticeable to eyes thoughts). Flicking onto the power button real hard solved the issue.
Click to expand...
Click to collapse
The problem persist when I completely remove the connector of the power/ volume button... When I push the power button I feel that the button moves and I hear a click-sound. Something else must be the cause of the problem. But still thanks for your help.
i have the same issue, did you find any solution to the problem?
Have the same problem is there any solution?
I don't have the phone so I cannot say this will solve the issue, however this sounds like a problem with the battery, something similar happened to my Redmi Go. The voltage should be low enough that the system boots, but just as it starts up the voltage drops to the point it reboots.
Solved it!!
I have Played with the power button and press it several times and it help.
I think the button was stuck or something close to that.
Thanks for you help guys!
ozer86 said:
Facts:
- Pocophone F1 is in an endless boot loop. Every 8 seconds it reboots itself.
- Recovery mode and Fastboot are reachable, but this doesn't stop the boot loop.
- I have never used a custom rom
- The bootloader is unlocked (ADB confirms this), USB debugging is enabled, but OEM unlocking is NOT enabled.
History:
The problems started after a regular update (I had never put a custom rom on the phone). The phone became unstable, constantly restarting itself. Sometimes restarting quickly, sometimes after a few minutes (reaching Android). I tried to unlock the bootloader, by tapping 7 times on MIUI Version, enabling USB Debugging [I did not enable OEM unlocking unfortunately...] and run the flashtool. The flashtool reported that the phone was unlocked. And after restarting, the phone reports to be unlocked. ADB confirms this too. But after unlocking the phone, it never ever again reached to Android, restarting itself always after exactly 8-9 seconds. I can get into recovery mode and fastboot, but it will still restart. In Fastboot, my pc recognizes the phone as an Android Phone. Is there a magical way to get out of this loop?
Click to expand...
Click to collapse
Chance 1: Power button bug
Chance 2: EMMC failed and your phone is long gone.
lockhrt999 said:
Similar thing happened to twice. My power button was kinda stuck (not noticeable to eyes thoughts). Flicking onto the power button real hard solved the issue.
Click to expand...
Click to collapse
Thank you! This was the issue. There is no way to tell that the power button is stuck. But it is and was causing my Poco F1 to bootloop even in fastboot or recovery mode. A symptom to look out for: your phone randomly locking once in a while due to this.
mateuxi said:
I don't have the phone so I cannot say this will solve the issue, however this sounds like a problem with the battery, something similar happened to my Redmi Go. The voltage should be low enough that the system boots, but just as it starts up the voltage drops to the point it reboots.
Click to expand...
Click to collapse
i booted in TWRP for 8-9 minutes with full brightness & no timeout but then mine didn't go into bootloop... recovery's getting powered but OS isnt?
Same thing happened to my F1, I press and flicked my power button hard and it worked. My problem happened maybe because the hard cover pushing the button too tight because it sometimes lock it self. Thank you for the tips! Just made account to reply to this thread.

Categories

Resources