So i installed the pie ota Update today and when unlocking the phone with fingerprint it opens to the home screen with an enabled keyboard which automatically disappears after about 0.5 seconds. Does anyone have the same issue? Or does someone know a solution to this bug?
I'm on stock rom with locked bootloader and installed the update through inbuilt update center.
Kulturmensch said:
So i installed the pie ota Update today and when unlocking the phone with fingerprint it opens to the home screen with an enabled keyboard which automatically disappears after about 0.5 seconds. Does anyone have the same issue? Or does someone know a solution to this bug?
I'm on stock rom with locked bootloader and installed the update through inbuilt update center.
Click to expand...
Click to collapse
Someone once told me: "After every update, factory reset." I can just say that he was right.
Remove all fingerprints before you accidentally lock yourself out. Then reboot, then set up fingerprints again. If this doesn't work, factory reset. But if you have TWRP you could also just delete the fingerprint database files.
Related
Fingerprint is not working in wickr with android pie on G965F, when i start the app i get the message: Too many attempts. Try again later. i get the message before trying to unlock with fingerprint.
Tried contacting their support and they told me to uninstall restart, create new fingerprints, restart, re-install, restart, enable fingerprint, restart.
I have tried all i can think of except factory reset but ill guess that's next, just wanted to see if any1 have fingerprint in wickr working on pie and G965F
donthomaso said:
Fingerprint is not working in wickr with android pie on G965F, when i start the app i get the message: Too many attempts. Try again later. i get the message before trying to unlock with fingerprint.
Tried contacting their support and they told me to uninstall restart, create new fingerprints, restart, re-install, restart, enable fingerprint, restart.
I have tried all i can think of except factory reset but ill guess that's next, just wanted to see if any1 have fingerprint in wickr working on pie and G965F
Click to expand...
Click to collapse
Same here, using TheGalaxyProject ROM on Pie.
Are you using stock?
Yes. Stock without root.
Ive just tried a complete reset and reinstall with the same problem, so suspect it is with the device.
I'll raise with Wickr Devs - plz do the same so they are aware.
Did you do factory reset? I've already notified their support.
Same for me after upgrading my stock S9 to One UI today. Annoying thing is I can't remember my password. Used to just use finger print unlock. When this happened before I upgraded I would just press the menu key and close the app, restart it and finger print unlock would work. After updating this work around no longer works.
K'+
I got a mail from their support. They are working on it.
It's fixed in the latest version.
after using the dialer menu to update to .187 on my lya-09 i can no longer use face unlock. i deleted the stored faces to see if this would fix it and i can no longer even enroll my face, it just sits at the look directly at the screen part and never goes any further. any ideas?
even after a factory reset i still cannot enrol face. it recognises my face is there but does not prompt me to turn my head like it usually does. i have no idea why
What's the dialer menu update method?
Found it.
djisgod I'm sorry that I can't offer you any help, but if you please keep us posted abot your problem and eventual solution. Thx in advance
It's probably seeing the software as modified and not allowing you to use the secure face unlock feature. Or it's broken by the update which might be why they've delayed it.
I'm not sure it is very strange. Does anybody know which apk or app it is that does the face enrolling so i can try and install a different version?
i have done the update, and face unlock works without any problem for me, but i also have the lya-l29
still no luck with this. i have tried reset to factory settings and reinstalling the firmware. neither work.
and now it has suddenly started working again. lol not sure why it stopped but i am glad its back!
which update file have you used to update your phone?
describe exactly which file you've used to update via dialer menu AND even which model do you use?
I used the update for my phone the lya-09 c432. 9.0.0.187 update file. All is working fine now. Not sure what was going on but face unlock is now working again.
I want to try out android 10 on my mi a3. I've even downloaded it. But i don't know how to install it. Some one help me please.
Android 10 for mia3 haven't out yat. you need to use custom rom in order to use it.
You just need twrp but if i were you stay on pie for now. Two unwanted changes concerning fingerprint and camera pro mode arising in android 10. It makes me wanna downgrade but cant anymore
amnher said:
You just need twrp but if i were you stay on pie for now. Two unwanted changes concerning fingerprint and camera pro mode arising in android 10. It makes me wanna downgrade but cant anymore
Click to expand...
Click to collapse
No issues with camera or fingerprint here on my device.
Try clearing data for camera or something. Have you tried anything at all with your camera app to get it working?
I did a factory reset after updating to 10. Set fingerprints, installed all apps, fhen restarted! That restart broke my fingerprint completely. Its completely non functional now. Only works once after restarting to open the phone, then its not there at all.
garylawwd said:
No issues with camera or fingerprint here on my device.
Try clearing data for camera or something. Have you tried anything at all with your camera app to get it working?
Click to expand...
Click to collapse
My camera is working same goes with fingerprint. But it is not featured the way it was on pie.
No 32s on pro mode
Fingerprint requires a tap for fod to display.
The rollout was pulled due to bugs. I had downloaded a copy and booted into recover using the power and volume up buttons. Once I saw the open Android I pressed power and tapped volume up again to get to options menu. I hit the apply update from SD option. It started to update but kept failing shortly after it started update. Kind of glad it didn't since there's a lot of bugs. Let's see how long before they start pushing update again SMH.
Hello,
Have global version of the phone. Yesterday have installed Android 12 firmware by OTA.
Always on display functionality doesn't work anymore - have tried all modes and on/off states. Also fingerprint scanner not showing and working on turned off screen at all. On android 11 I was able to unblock phone just using scanner. Now I must turn on screen by power button before. Is any some settings that I've missed or it bug of new firmware?
Also is there a way to downgrade firmware?
Thank you.
Did try to factory reset?
0kti said:
Did try to factory reset?
Click to expand...
Click to collapse
Not yet. Have tried only reset system settings. Now am trying to discover is there any other way that full reset to fix. Have a lot of applications that should be restored and reconfigured after reset...
how could you install it on the global version? what county are you from?
Zierbeek said:
how could you install it on the global version? what county are you from?
Click to expand...
Click to collapse
russia. Just check the update section on the phone...
thanks! is it bad to flash a C version on an A version?
Mike Starkov said:
Not yet. Have tried only reset system settings. Now am trying to discover is there any other way that full reset to fix. Have a lot of applications that should be restored and reconfigured after reset...
Click to expand...
Click to collapse
hi, i have the same problems after updating the os via ota. Both a soft and hard reset were useless
Same bug after upgrading from full ota file
I've have a solution for this issue. It's not ideally - because you cannot restore the phone from backup and need to migrate all data and applications manually.
I have loaded phone in the recovery mode (turning on by power button + volume down button) and perform the wipe data operation. After reboot I've initialized the phone without restoring from backup.
AOD works correctly but the fingerprint sensor doesn't showing by default on AOD screen. I've turned off/on the Show finderprint settings and all works fine.
After that I've installed and initilized all applications from Google play.
I've installed OTA today, have no issues, Global Version, Germany.
Hi, have same problem with mine, Poland - GDPR.
Edit, AOD started working for me after formating data from recovery mode. Dont use in-android wiping.
Edit 2: AOD is working untill i log in to google...
Same issue here! Global Version - Italy
It's very annoying, I hope in a fast new update
Same problem here. Global Version - Spain
No way to make AOD work. Have tried all possible setups. It was working fine in previous version. Quite frustrating.
I've also noticed since updating to Realme UI 3.0 - Android 12, that some apps are asking for fingerprint to unlock, while other apps ask for face unlock...
These apps would always ask for fingerprint in previous version.
Anyone else facing this problem?
I have the same issue when I try to unlock an app with finger. The finger sensor not appears. I must power off screen and then power up for sensor appear and works
EDIT: IF RESET FACTORY DOESNT WORK FOR U JUST GO TO SERVICE CENTER(I did it after all)
Hello
My device is Global version with miui V13.0.4.0.SKIMIXM
my fingerprint stopped working a week ago, then i contaced the support and they said these solutions:
1-factory reset
2-wipe data
3-download latest package
4-clean fingerprint area
i did all and somethimes just right after booting device my fingerprint showed up and working but after about couple hours back to the problem.
on early time of this problem i had fingerprint setting but couldnt open it (couldnt add fingerprint hint) but after some times it removes from setting too then at last after wiping data and solution above , fingerprint never showed up. so i decided to flash the original rom with fastboot and after i did that my fingerprint comesback and was working but again after couple hours stopped.
the thing is if safe mode it was working. even after rebooting to normal working 2 or 3 times then after that stop working again. in safe mode CIT fingerprint tests passed successfully untill right now after half a day i dont have fingerprints even in safe mod.
so i think of downgrading to miui 12.5.7 just want to be sure is it safe to downgrade because when i wanted to flash miui13 it errored with rollback but i edited script and flash was successful.
script edit is safe for downgrade ?
and maybe is there any othe solution that im not aware of?
13eauty said:
Hello
My device is Global version with miui V13.0.4.0.SKIMIXM
my fingerprint stopped working a week ago, then i contaced the support and they said these solutions:
1-factory reset
2-wipe data
3-download latest package
4-clean fingerprint area
i did all and somethimes just right after booting device my fingerprint showed up and working but after about couple hours back to the problem.
on early time of this problem i had fingerprint setting but couldnt open it (couldnt add fingerprint hint) but after some times it removes from setting too then at last after wiping data and solution above , fingerprint never showed up. so i decided to flash the original rom with fastboot and after i did that my fingerprint comesback and was working but again after couple hours stopped.
the thing is if safe mode it was working. even after rebooting to normal working 2 or 3 times then after that stop working again. in safe mode CIT fingerprint tests passed successfully untill right now after half a day i dont have fingerprints even in safe mod.
so i think of downgrading to miui 12.5.7 just want to be sure is it safe to downgrade because when i wanted to flash miui13 it errored with rollback but i edited script and flash was successful.
script edit is safe for downgrade ?
and maybe is there any othe solution that im not aware of?
Click to expand...
Click to collapse
solution is service center...in theory no anti rollback....just check in script before flash
rayman95 said:
solution is service center...in theory no anti rollback....just check in script before flash
Click to expand...
Click to collapse
thansk for reply so youre saying that in theory there is no problem to downgrade with editing script but in real life God knows right?
Unfortunately I have the same problem on my MI11 Lite 5G.
I would be interested if I install a custom ROM e.g. CorvusOS 3.2-V v12.1 if it works with it
So if anyone has experience with it?
norryhox said:
Unfortunately I have the same problem on my MI11 Lite 5G.
I would be interested if I install a custom ROM e.g. CorvusOS 3.2-V v12.1 if it works with it
So if anyone has experience with it?
Click to expand...
Click to collapse
i tried some custom roms before i send my phone to the service center and none of them worked.today i recieved my phone back and everything is great after replacing fingerprint.