Everything suggests so but would like to get confirmation before I finish my fight.
Phone was reacting weird, apps were closing itself upon opening. I copied important stuff from phone but one folder wouldn't delete. After reboot I get stuck on logo and nothing. Once phone loaded next logo and then error that encryption was interrupted so factory reset is necessary. After reboot keeps hanging on logo. Wouldn't flash any firmware, errors from Sahara. Failed to mount cache, wiping data does nothing. I got into fastboot and unlocked bootloader and even managed to flash a firmware but after reboot same thing, stuck on logo. Further inspection and
fastboot oem device-info
Device unlocked: false
fastboot oem unlock
fastboot oem device-info
Device unlocked: true
fastboot reboot bootloader
fastboot oem device-info
Device unlocked: false
flashing boot.img gives error : FAILED remote: partition table doesn't exist
similar situation to described here : https://forum.xda-developers.com/go...tboot-oem-unlock-goes-to-lock-reboot-t2903581
so looks like nothing can be done but please confirm because if there is something I am open for ideas
Related
I'm trying to de-softbrick an Evo3D for an aquaintance, and I've run out of ideas, so any help this forum is willing to offer is muy apreciada.
Info about phone:
UNLOCKED
HBOOT 1.5
S-ON
Phone will not boot to OS. Phone will boot into hboot. Recovery menu does not function, it shows the fastboot menu instead. Selecting Fastboot takes you to the Fastboot menu, which seems to work fine. Factory Reset option takes you to Fastboot menu.
Initially phone seems to load PG86IMG.zip for flashing, but when the blue loading meter fills up, it says "parsing PG86IMG.zip" for a second and then boots me back to the hboot menu, without asking me to install the file. I've tried both the stock rooted and unrooted zips.
Tried plugging the phone into my computer and running the RUU exe. It will not detect the phone, which I'm guessing is because the phone won't boot into the OS. Also, phone does not appear to respond to any adb or fastboot commands (tried doing adb pull and fastboot reboot, neither worked).
EDIT: Now the phone is detected by the RUU, but I get a 155 error code, and the phone says "Security fail!" and "Update fail!"
Again, any help is appreciated.
What happens when you try to run any fastboot command?
xxjrkkrjxx said:
What happens when you try to run any fastboot command?
Click to expand...
Click to collapse
I get < waiting for device > and it just sits there forever.
try this
Enter FASTBOOT
Open command prompt in your computer
Relock your device by typing "fastboot oem lock" , device will reboot.
Enter FASTBOOT again (you will see *** RELOCKED ***)
Apply the RUU.
RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10. 0808_NV_SPCS_1.31_003_release_219445_signed
http://www.filefactory.com/file/cfd5...445_signed.exe
Your device will be back to stock rom unrooted
Mr.Esp said:
try this
Enter FASTBOOT
Open command prompt in your computer
Relock your device by typing "fastboot oem lock" , device will reboot.
Enter FASTBOOT again (you will see *** RELOCKED ***)
Apply the RUU.
RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10. 0808_NV_SPCS_1.31_003_release_219445_signed
http://www.filefactory.com/file/cfd5...445_signed.exe
Your device will be back to stock rom unrooted
Click to expand...
Click to collapse
Here's the output of the fastboot oem lock (it's responding to fastboot commands now YAY!):
Code:
C:\android-sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 66977136 (0x3FDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.936s
It does show the phone as relocked now, but right below the pink "***RELOCKED*** I also have ***SECURITY WARNING***. The security warning part seems to go away if I boot into hboot with the sd card removed.
EDIT: RUU worked on the second try after this. Thanks a ton!
I'm having the same issue but the link to the RUU does not work anymore, can anyone repost?
martymania85 said:
I'm having the same issue but the link to the RUU does not work anymore, can anyone repost?
Click to expand...
Click to collapse
http://tinyurl.com/6tauv3b
billdozer357 said:
Here's the output of the fastboot oem lock (it's responding to fastboot commands now YAY!):
Code:
C:\android-sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 66977136 (0x3FDFD70)
FAILED (status read failed (Too many links))
finished. total time: 0.936s
It does show the phone as relocked now, but right below the pink "***RELOCKED*** I also have ***SECURITY WARNING***. The security warning part seems to go away if I boot into hboot with the sd card removed.
EDIT: RUU worked on the second try after this. Thanks a ton!
Click to expand...
Click to collapse
Does USB come up next to Fastboot? If so can you reflash CWM?
Hello there!
I was on Sultanxds Custom rom + kernel and decided to flash another Rom. Therefore i wanted to update my TWRP to Version 3.0.2.0.
So i went into fastboot, connected my phone to the pc as always an ran the comand: "fastboot flash recovery twrp-3.0.2-0-onyx-20161116-113742.img". I got the message: "FAILED (remote: Device not unlocked cannot flash or erase)"
So i checked for oem unlock and this was the message i got.
"(bootloader) Device tampered: true
(bootloader) Device unlocked: false"
I just dont understand why the bootloader is locked... how is this even possible but anyways so i tried to just normaly reboot the device. But now i see the 1+ logo for 1 sec and it vibrates. And then it turns black again and I see the logo again and again...
But i'm still able to enter fastboot mode and i can send command from my PC. Can anyone tell what steps i have to do to make it bootable again? (is this a hardbrick?).
Thx in advice!
I just followed the hardbrick guide and i'm now on stock OS. For some reason the bootloader was locked again... problem solved and this thread can be closed...
FASTBOOT ERROR "FAILED (remote: fastboot is lock, please run oem unlock with valid pa
on ANY fb command i get "FAILED (remote: fastboot is lock, please run oem unlock with valid password)"
ALSO after "fastboot oem unlock" i get:
---
and just a uncloseable shell box that is unresponsive ..iv flashed this device before and same error when any get unlock var or info command any ideas my device is a moto tc700x (is an old symbol\zebra now)
i never put a password in before i flashed my device for IoT and got a freeze during install now i cannot do anything w it even reflash recovery or zips i used previously used before?
any ideas anyone?
metalman1972 said:
on ANY fb command i get "FAILED (remote: fastboot is lock, please run oem unlock with valid password)"
ALSO after "fastboot oem unlock" i get:
---
and just a uncloseable shell box that is unresponsive ..iv flashed this device before and same error when any get unlock var or info command any ideas my device is a moto tc700x (is an old symbol\zebra now)
i never put a password in before i flashed my device for IoT and got a freeze during install now i cannot do anything w it even reflash recovery or zips i used previously used before?
any ideas anyone?
Click to expand...
Click to collapse
You can use "fastboot getvar all" cmd to check whether ur boot loader is locked
fastboot oem get-build-number
(bootloader) :ANE-LX1 9.1.0.360(IRLC368E6R1P6)
fastboot getvar vendorcountry
vendorcountry: h3g/ie
fastboot oem oeminforead-CUSTOM_VERSION
(bootloader) :ANE-LX1-CUST 9.1.0.6(IRLC368)
fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :ANE-LX1 9.1.0.134(IRLC368E4R1P6)
Click to expand...
Click to collapse
First, this phone has been hell, no other phone that I've ever tried to root behaved like this, anyways, yesterday I unlocked my bootloader using the PotatoNV Test pin method, All was smooth sailing until I tried installing TWRP with the help of this thread, but somewhere along the line, everything just broke, For some reason every time I flash 'recovery_ramdisk' it does nothing, I still get put into the stock eRecovery.
Some more info:
Phone: UNLOCKED
FRP: UNLOCKED
After flashing 'recovery_ramdisk', the phone boots up for a second, than turns back on, than it boots to the 'Your device cant be trusted screen'
I have 2 options, boot into recovery, or the system.
I cant seem to boot into TWRP as it always boots into eRecovery, the 'Update and recover system' Button doesn't work, it always fails to fetch info.
when I boot into the system I get promoted with.
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 10 (Boot image)
Func NO: 2 (Load failed!)
Click to expand...
Click to collapse
Any help would be greatly appreciated, guides on reflashing everything to stock etc.
In fastboot flash EMUI 9.1 Stock recovery_ramdisk, download here
- fastboot reboot
- When the yellow warning appears, press and hold Vol Up. In eRecovery turn off your phone.
- Then press and hold Power & Vol Up, your phone should reboot into Recovery.
Thank you! Last step cleared everything up a lot
Hello,
I have a p20 lite stuck in a boot loop. I tried installing an A13 gsi, stopped booting to the system. Tried reinstalling EMUI from erecovery and doing a factory reset, still stuck in a boot loop. I can reboot to TWRP, fastboot and erecovery, but booting to system gets to the huawei logo with a jingle (past the this phone cannot be trusted screen), then reboots.
Command info from fastboot:
fastboot oem get-build number:
ANE-LX1 8.0.0.180(C432)
fastboot oem get-product-model:
ANE-LX1
fastboot getvar vendorcountry:
vendorcountry: hw/eu
fastboot oem oeminforead-CUSTOM_VERSION:
FAILED (remote: 'Read oeminfo failed!')
fastboot: error: Command failed
fastboot oem oeminforead-SYSTEM_VERSION:
ANE-LX1 8.0.0.180(C432)
The device shows up in device manager as "Android Sooner Single ADB Interface", fastboot recognizes it, I can transfer files via MTP, it just doesnt boot to the system.
I do have the bootloader code saved, so it does not matter if it relocks.