Hi Everyone,
I am using dual sim Sony Aqua M4 E2353. All of the sudden, the screen go black. Now I can not see anything and I want to backup phone's data.
Vol up + Power key gives single vibration and then three consecutive vibration and then phone is switched off.
I can easily switch on the phone as get vibration on clicking power key.
As the screen is black, I can not unlock it with my pattern lock. I connected the phone to my computer and it was connected; however, as the screen lock is enabled, it did not allow me to go inside the drive and to get the data back.
I used third party software but it says that USB debugging should be on to recover data using their software.
I want to know the following and need help to recover the data:
1. Is there anyway I can disable lock pattern without looking at screen?
2. Can I use ADB to make USB debugging on or can use ADB to unlock the phone?
I am on stock ROM with unlocked bootloader. I want to recover and get back the data only. Please help me as any help for this would be highly appreciated. Please provide steps how can i get my data back from the phone as screen is all black.
Related
Hi,
yesterday I forgot my unlock pattern and now after too many attempts to unlock, I am getting google sign in option but when tablet was lock my tablet wifi was off so my google id is not letting me sign in,
So can anyone tell me can I start the wifi of my table in locked mode so i can login with my google account?( I tried the keypad wifi hot key buts is not working) or can I factory reset my tablet (my USB Debugging option is also off )
please help if anyone has any other idea to unlock the table.
Thanks
Guys plz help
If you don't mind factory ressetting try this (BEFORE DOING THAT CHECK IF YOU CAN COPY YOUR DATA FROM INTERNAL STORAGE TO YOUR COMPUTER USING THE USB CABLE WITH THE SCREEN LOCKED, AND DO IT. WHEN YOU WIPE PROM SETTINGS IT SAYS THAT IT ERASES PHOTOS (SO I THINK IT ERASES INTERNAL MEMORY)):
Turn off the tablet, I think you can do it from the lockscreen, if it doesn't work press the power button for a long time.
Turn on the tablet holding volume down and power until some text appears in the bootloader screen.
Then wait for the tablet to ask you to confirm what you want to do before 10 seconds (boot android or wipe data).
I don't remember if it was volumen down or volume up, anyway don't worry it appears on the screen. One of these buttons will allow you to choose what you want to do. The other will confirm what you've chosen. Remember to do this last thing in less than 10 seconds or the tablet will boot android normally.
I hope you can wipe this way without having to enter the pattern.
Help!
Ive got a samsung galaxy s2 - originally it was on the UK Orange network, but since then I have flashed it with a different European firmware (unsure which one).
The screen has cracked therefore I can not use the touch screen at all.
I can not see anything on the screen except the battery level.
I need to take the data off it (pictures, vdeos etc.) which are stored on the phones internal memory.
When I connect it to my windows xp PC, it comes up in My Computer but when I try opening it it shows nothing.
I think this is because I need to unlock the screen (4 digit pin).
When I connect it to Kies, it says I need to enter the screen unlock code - But I can not due to the screen being cracked.
Only the hardware buttons work.
Is there a way I can connect the phone to my PC and get the data off?
I need somesort of app that will allow me to mimic/display the phone screen on my PC so that I can enter this screen unlock code to get into the phone.
Or can I do a refresh (restore factory setting/clear operating system) at boot up so that when it does eventually boot up into the welcome/set up screens, I can connect it to my PC to transfer the data off?
Can someone please help?
maybe you could connect mass storage in CWM ? assuming that you have CWM.
rajveer.sandhu said:
Help!
Ive got a samsung galaxy s2 - originally it was on the UK Orange network, but since then I have flashed it with a different European firmware (unsure which one).
The screen has cracked therefore I can not use the touch screen at all.
I can not see anything on the screen except the battery level.
I need to take the data off it (pictures, vdeos etc.) which are stored on the phones internal memory.
When I connect it to my windows xp PC, it comes up in My Computer but when I try opening it it shows nothing.
I think this is because I need to unlock the screen (4 digit pin).
When I connect it to Kies, it says I need to enter the screen unlock code - But I can not due to the screen being cracked.
Only the hardware buttons work.
Is there a way I can connect the phone to my PC and get the data off?
I need somesort of app that will allow me to mimic/display the phone screen on my PC so that I can enter this screen unlock code to get into the phone.
Or can I do a refresh (restore factory setting/clear operating system) at boot up so that when it does eventually boot up into the welcome/set up screens, I can connect it to my PC to transfer the data off?
Can someone please help?
Click to expand...
Click to collapse
please mention as to wat rom are u on
and also if u r rooted nd stuff
If your rooted boot into recovery..
Usually press power and volume down button
Select recovery from menu, Goto mounts n storage and toggle USB connection.. (use volume keys to navigate and power button to select)
Make sure sdcard setting is set to mounted.. I think sdcard is actually set for the internal storage on these phones.. and the actual SD card is set as external storage..
rajveer.sandhu said:
Help!
Ive got a samsung galaxy s2 - originally it was on the UK Orange network, but since then I have flashed it with a different European firmware (unsure which one).
The screen has cracked therefore I can not use the touch screen at all.
I can not see anything on the screen except the battery level.
I need to take the data off it (pictures, vdeos etc.) which are stored on the phones internal memory.
When I connect it to my windows xp PC, it comes up in My Computer but when I try opening it it shows nothing.
I think this is because I need to unlock the screen (4 digit pin).
When I connect it to Kies, it says I need to enter the screen unlock code - But I can not due to the screen being cracked.
Only the hardware buttons work.
Is there a way I can connect the phone to my PC and get the data off?
I need somesort of app that will allow me to mimic/display the phone screen on my PC so that I can enter this screen unlock code to get into the phone.
Or can I do a refresh (restore factory setting/clear operating system) at boot up so that when it does eventually boot up into the welcome/set up screens, I can connect it to my PC to transfer the data off?
Can someone please help?
Click to expand...
Click to collapse
ADB is the only way
Swyped from my Samsung Galaxy SII
you can send me to a private message, I can show you how to install a vnc server, perhaps from the pc side, assume you have debug enabled your phone. Then you should be able to view and control your phone.
Hi,
First of all: I have already read a lot of threads about this topic, but none of them was able to help me so far.
I have a broken Galaxy S3 (GT-I9300). The screen doesn't work anymore. And when I say it does not work, I mean it: Nothing is displayed and it doesn't react to touch gestures any more, it is completely dark. Nevertheless my phone still works. The LED lights up, when I turn on the phone and my computer recognizes the phone. But I am not able to access the data on my phone as it is locked. I already removed the SIM Card to avoid being prompted to enter the PIN, but there is still the screen lock, which i can not pass.
Unfortunatelly I have USB Debugging disabled, so I can not access it via ADB. When i type adb shell the response is just "device not found" and (surprise surprise) when i type adb devices the list is empty.
Is there a way to get my phone to work with ADB again? Tried to start it in recovery mode with Volume Up, Home Button and Power, but that didn't work out either.
I am grateful for every hint
Cheerio
Buntspecht
Hi there XDA community,
I am turning to you with a specific question that I have regarding the issue with my Xiaomi Redmi Note 3 from 2/2017.
I had an accident where the phone fell on the side directly on the Volume Down button and it was constantly pressed in. I used to have issues with waking up my screen as it would automatically switch off if I didn't press the Volume Up and Back buttons simultaneously. Otherwise the phone is still in full working condition and I managed to unstuck the Volume Down button since.
When I ended one phone call, the black screen wouldn't turn on no matter what, so I got frustrated and played with the buttons and entered the Fastboot mode. I didn't do anything there so I just left and turned the device back on normally.
I was prompted to enter my password, which is always the same 4 charachter all-numbers code and it wouldn't get recognized by the phone no matter what. I am sure I typed it in correctly.
Ever since, I have been locked out of the phone and am looking for options to gain access to it.
The Android Device Manager is of no help, I do not have any Forget Password buttons, my bootloader is locked as far as I know because I didn't change anything there and the USB debugging is disabled.
Do I stand any chance of accessing my data without losing it, perhaps with use of some special software tool or passcode remover?
I don't know exactly what my firmware is, but it probably is MIUI 8 or 7.
Thank you very much for your help and advice!
Wish you to end 2017 being your bestself possible!
Odinlo
Did you tried this ?
http://en.miui.com/thread-292962-1-1.html
Hey,
the Android Device Manager is of no use because the phone is too new to change the password.
Also the recovery mode is inaccessible because the bootloader is locked any my USB debugging is not enabled.
Can you help yourself with the Fastboot mode in any way?
Also, I don't understand why something like this would happen and what is the password now that the device demands.
Do you know of any software tool that would recover all the data after restoring the phone and deleting all the data?
Thank you very much!
Odinlo said:
Hey,
Do you know of any software tool that would recover all the data after restoring the phone and deleting all the data?
Thank you very much!
Click to expand...
Click to collapse
Wait , what kind off lock is on your device ?
1. Pattern lock
2. MiAccount Lock
3. Lock Screen Password
Here is a tool to remove password :
https://mega.nz/#!10UDXQTI!sZb9wjh07rGAsSbE2YpOWyuu-0Vi4fujbHvSTnyz_I8
Warning!!! I didn't check file against viruses so do check .
How to use:
https://www.youtube.com/watch?v=eDb9BNLmiJ4
Hi Teddy Lo,.
thanks for help, I really appreciate it. It is the Lock screen password on the device
Hi experts,
Trying to keep my kids from using my own tablet, I recently changed the screen lock and forgot the new pattern afterwards
I have the credentials of 2 google accounts opened on the tablet and my fingerprint is already enrolled on the device, I thought I could live with the finger print but discovered that I must enter the screen lock once every two days !
Now the device is locked, and it doesn't give the option of "forgot your pattern" or reset using your google account.
I'm trying to poweroff the device to restart in recovery mode, but even the poweroff function requires the screenlock pattern. I had to let it till battery is empty to poweroff, and yet I can't start it in recovery mode (power + volume up)
The WiFi is ON on the device, and it's connected to Internet, but though Google android device manager can't locate or connect to it !
My 2 Questions are:
1- How can I unlock the device with my google account or fingerprint ?
2- If the above is not possible, I need the photos and videos on the device :crying:, is there anyway I can unlock the device without needing to wipe out the data and reset it to factory ?
Please help & Thanks in advance.
ahmad.tawila said:
Hi experts,
Trying to keep my kids from using my own tablet, I recently changed the screen lock and forgot the new pattern afterwards
I have the credentials of 2 google accounts opened on the tablet and my fingerprint is already enrolled on the device, I thought I could live with the finger print but discovered that I must enter the screen lock once every two days !
Now the device is locked, and it doesn't give the option of "forgot your pattern" or reset using your google account.
I'm trying to poweroff the device to restart in recovery mode, but even the poweroff function requires the screenlock pattern. I had to let it till battery is empty to poweroff, and yet I can't start it in recovery mode (power + volume up)
The WiFi is ON on the device, and it's connected to Internet, but though Google android device manager can't locate or connect to it !
My 2 Questions are:
1- How can I unlock the device with my google account or fingerprint ?
2- If the above is not possible, I need the photos and videos on the device :crying:, is there anyway I can unlock the device without needing to wipe out the data and reset it to factory ?
Please help & Thanks in advance.
Click to expand...
Click to collapse
I believe fingerprints and passcodes are stored locally on the device. They wouldn't have anything to do with Google. Hook it to a computer and see if you can save your files cause it's probably going to take a factory reset to get rid of that. If you can't access the tablet to do a factory reset that way you will probably need to use Odin to return it to stock and start over from there.
ahmad.tawila said:
Hi experts,
Trying to keep my kids from using my own tablet, I recently changed the screen lock and forgot the new pattern afterwards
I have the credentials of 2 google accounts opened on the tablet and my fingerprint is already enrolled on the device, I thought I could live with the finger print but discovered that I must enter the screen lock once every two days !
Now the device is locked, and it doesn't give the option of "forgot your pattern" or reset using your google account.
I'm trying to poweroff the device to restart in recovery mode, but even the poweroff function requires the screenlock pattern. I had to let it till battery is empty to poweroff, and yet I can't start it in recovery mode (power + volume up)
The WiFi is ON on the device, and it's connected to Internet, but though Google android device manager can't locate or connect to it !
My 2 Questions are:
1- How can I unlock the device with my google account or fingerprint ?
2- If the above is not possible, I need the photos and videos on the device :crying:, is there anyway I can unlock the device without needing to wipe out the data and reset it to factory ?
Please help & Thanks in advance.
Click to expand...
Click to collapse
Can you access TWRP? May not function on the S5e, but on another device it works to use Advanced - File Manager, navigate to /data/system and then delete the locksetting.db file. This effectively removes the lock settings on reboot. Good luck
redemptionx11 said:
I believe fingerprints and passcodes are stored locally on the device. They wouldn't have anything to do with Google. Hook it to a computer and see if you can save your files cause it's probably going to take a factory reset to get rid of that. If you can't access the tablet to do a factory reset that way you will probably need to use Odin to return it to stock and start over from there.
Click to expand...
Click to collapse
Unfortunately, connecting it to the PC does not open anything !
ahmad.tawila said:
Unfortunately, connecting it to the PC does not open anything !
Click to expand...
Click to collapse
Might be a little drastic, but you can follow the instructions for unlocking the bootloader. That will cause a factory reset. You will probably need to let the battery run down. Then, plug the USB cable into a PC and NOT the tablet. Press and hold both vol up and down and then plug the USB into the tablet. This should get you into the unlock screen. It will also get you into the download mode to use Odin.
lewmur said:
Might be a little drastic, but you can follow the instructions for unlocking the bootloader. That will cause a factory reset. You will probably need to let the battery run down. Then, plug the USB cable into a PC and NOT the tablet. Press and hold both vol up and down and then plug the USB into the tablet. This should get you into the unlock screen. It will also get you into the download mode to use Odin.
Click to expand...
Click to collapse
If he can't get into the tablet at all he's not able to tick the oem unlocking toggle in Dev settings. Don't you have to do that in order to unlock bootloader?
redemptionx11 said:
If he can't get into the tablet at all he's not able to tick the oem unlocking toggle in Dev settings. Don't you have to do that in order to unlock bootloader?
Click to expand...
Click to collapse
If you let the battery run down and then use the method I gave, you CAN get to the unlock mode. And, no, you don't have to enable OEM or Dev mode to unlock the bootloader and reset the tablet. But after doing it, you will need the google login info, which the OP claims to have.
amphi66 said:
Can you access TWRP? May not function on the S5e, but on another device it works to use Advanced - File Manager, navigate to /data/system and then delete the locksetting.db file. This effectively removes the lock settings on reboot. Good luck
Click to expand...
Click to collapse
The device did not has TWRP installed before. and it's not rooted, it is with the stock ROM
Can I install TWRP from Recovery mode while the tab is locked ?
and if that's possible, is there any pitfalls or tricks that I should be aware of when installing & using TWRP ?
I went through searching and reading about how to do it, and got questions
- choosing the TWRP version to download, should I pick twrp.me/samsung/samsunggalaxytabs5elte.html or twrp.me/samsung/samsunggalaxytabs5ewifi.html ?
- I read that the only way to install TWRP without rooting, is through Odin which I never used. but what I read in
getdroidtips.com/twrp-recovery-galaxy-tab-s5e/,
getdroidtips.com/flash-twrp-recovery-samsung-phone/ &
getdroidtips.com/how-to-unlock-bootloader-on-samsung-galaxy-phones/
mentions that the device data will be wiped in the process. Is there anyway that does not involve wiping the data ?
Thank you for your support