Related
When I say Quick Charge, I mean proper QC technology, not some "quick" or "fast" charging method unique to Huawei only.
The stock charger says [email protected] or [email protected] QC2 and 3 can do [email protected] However when I put the M5 onto my QC3 charger, it only draws [email protected] as tested with a cable with V/A reading.
Charger and cable had been tested to work at proper QC power with my ZTE Axon 7, drawing 18W and also a Moto G4 Turbo Charging.
The strange thing is, if there is some "special" Huawei only technology on the stock charger, it still charges my Axon 7 and G4 with "standard" QC3. Anyone has been successful charging their M5 on a standard QC2/3 charger?
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Michaelflat1 said:
Only does fast charge when the screen is turned off.
there's also a possibility that your volt/amp meter is blocking the fast charge also.
Click to expand...
Click to collapse
Tried it with screen on or off, and even with the M5 off, still 10W on a non stock QC3 charger.
Cable definitely works for quick charge because I used the same cable on the stock charger and it reads 18W, so it is not blocking anything.
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Obveron said:
I use this QC3 charger. I get the dual lightning bolt symbol which I think means fast charge.
https://www.amazon.ca/gp/product/B01GFDSO1M
Click to expand...
Click to collapse
Yes, 2 lighting symbol means QCing. However it does not show on my non stock QC charger. My other QC-able devices does on both that charger and the Huawei stock one, strange.
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
This is what I use: http://amzn.eu/cLL0gg9
Cable shouldn't matter for QC and proven not to matter as I used the same random cable (and also the cable with the V/A meter) on this charger and the stock charger. It QC my M5 and Axon 7 on the stock charger but only QC my phone on the Aukey charger.
I have a USB C charger ordered, will see if that works better with the M5.
Obveron said:
Huawei's fast charge is not part of the Qualcomm's QC standard. However I have found that QC3 is cross compatible with Huawei M5's fast charge.
My 2 cents.
For what its worth, I use this charger:
https://www.amazon.ca/gp/product/B01GFDSO1M
with this cable:
https://www.amazon.ca/gp/product/B01E716UQA
Not the cheapest available, but quality is top notch.
Click to expand...
Click to collapse
I had since discovered that Huawei does not use QC standards but their own FCP for fast charge. Some QC chargers have that ability built in, but not all. Time to invest in more chargers I think.
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
alvinlwh said:
Further update: My charger with USB PD arrived and no, it does not charge the M5 (FCP) nor my Axon 7 (QC3) fast. However the M5 charges off my Tronsmart portable charger with VoltIQ and QC3. I had done a bit of digging around and found (so far) that only Tronsmart make any chargers that can support both standards at the same time from the same port. This is great as it is when I am out and about I will need quick charging most.
Sadly they do not (at the moment) make a charger with, say 2 x QC + VoltIQ ports. It is either 1 x QC + VoltIQ and 4 x normal or 5 x QC + VoltIQ and that one costs a bit too much.
Click to expand...
Click to collapse
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
almaalma74 said:
I read this article and it says BlitzWolf BW-S6 knows the FCP charging and it will work the fast charging on Huawei. I will order one to try it...
Click to expand...
Click to collapse
There are many chargers that can QC and FCP at the same time, BUT very few that have 2 or more ports that can do them all at once (or at least FCP+QC on one and QC on the other), just one port and the other one at normal speed. There is a Tronsmart one with 5 ports but it is quite costly.
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
StephenMSmith said:
What happens if you just plug m5 into Google phone usb-c fast charger? Like for my nexus 6p. Slow charging? How much slower? Really want one USB c charger for all my stuff.
Click to expand...
Click to collapse
Not sure what the nexus comes with. However I had tried it with QC3 charger and a USB C PD charger and both just slow charges. Only Huawei original charger or SOME chargers with VoltIQ can fast charge the M5.
plugging in my USB tester proves that actually it takes a 9v 2a charge from original power adapter and cable. Whilst screen is on also.
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Ivanbarker said:
I'm looking at various chargers and cables to make use of quick charge, or at least fast charge. Correct me if I'm wrong, but I need a FCP capable charger, and a 5A cable?
Do you think these will work?
https://www.amazon.com/gp/product/B01GFE90H8/ref=nav_signin?
https://www.amazon.ca/laddertek-Com...1533821459&sr=1-10&keywords=magnetic+usb-c+5a
Click to expand...
Click to collapse
I can confirm that you do not need the original cable for FCP charge. I used a USB 3.0 (blue plug) cable that works with QC3 for FCP and this is confirmed by a USB V/A meter.
I think Huawei has their own standard. Some of my QC 2 chargers work, some don't using the same cable.
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
StephenMSmith said:
Frustrating that I can't use my Google phone usb-c charger for fast charging. How much slower is it using non Huawei fast charger? Any ideas?
Click to expand...
Click to collapse
Huawei FCP is [email protected]=18W or [email protected]=22.5W. Not sure which one our tablet uses, at work cannot check the actual charger. However when plugged into a QC2/3 charger, it charges at [email protected]=10W. Meaning it will be between 80% to 125% more time with a non FCP charger.
Having just picked up my M5 8.4, confirm my PD charger is (apparently) quick charging the device. It says fast charge on the lock screen and I've got the double lightning bolt in the status bar. Score!
Hi somehow I lost my mediapad M5 charger
Is there anyone in the UK how could tell me what charger was included in box ??
I know it's supposed to be fast charger but I'm almost certain the one included in mine was the fatter super charger
Thanks just trying to find a replacement
Mine says (CMR-AL19)
Huawei Quick Charge
MODEL: 059200EHQ
INPUT: 100-240V ~ 50/60Hz , 0.5A
OUTPUT: 5V == 2A OR 9V == 2A
This doesn't really answer your question as such but since my M5 charger stopped working 4 months ago, I have been using my Google Pixel XL 2 charger which fast charges fine. The original Pixel charger also fast charges the M5 without issue.
Si73 said:
This doesn't really answer your question as such but since my M5 charger stopped working 4 months ago, I have been using my Google Pixel XL 2 charger which fast charges fine. The original Pixel charger also fast charges the M5 without issue.
Click to expand...
Click to collapse
My Samsung s8+ adaptive fast charger also fast charges it too
Hello all
Quick question : is my dash charge charger from my ex One plus 3 will do the job for my xiaomi mi9 ?
It is like this one : https://www.amazon.fr/Chargeur-tabl...rge+oneplus+3&qid=1558015037&s=gateway&sr=8-5
It was extremely fast for the one plus, I wonder if I could damage the battery using it on my MI9
OnePlus Dash Charge : 20W
Xiaomi Mi 9 Boxed charger : 18W
Xiaomi Mi 9 supports QC 4+: 27W
So the charger you get in the box is slightly slower, but you can buy a QC4+ charger for ~25-50€ with 27W.
You could also buy a 20W Qi charger, but if have concerns about damaging your battery this should be your last option imo.
You can charge the Mi9 with the OP Dash Charger and it won't damage your phones. I'm not sure if it actually charges with 20W tho. I also switched from the Oneplus 3 to the Mi9 and when i plug in my dash charger it says "fast charging", but i wouldn't say it is faster then the boxed charger.
orawnnd said:
OnePlus Dash Charge : 20W
Xiaomi Mi 9 Boxed charger : 18W
Xiaomi Mi 9 supports QC 4+: 27W
So the charger you get in the box is slightly slower, but you can buy a QC4+ charger for ~25-50€ with 27W.
You could also buy a 20W Qi charger, but if have concerns about damaging your battery this should be your last option imo.
You can charge the Mi9 with the OP Dash Charger and it won't damage your phones. I'm not sure if it actually charges with 20W tho. I also switched from the Oneplus 3 to the Mi9 and when i plug in my dash charger it says "fast charging", but i wouldn't say it is faster then the boxed charger.
Click to expand...
Click to collapse
Thanks
I just tested, and it charges slower with OP dash charge
I have bought the wireless 20w pad charge , and it charges 1% per 40 sec, the pad plugged with the stock xiaomi charger ( who is 18w )
I would like to try a 27W, have you got a link for a good one ?
Have just tried my old OnePlus dash charger and it's the same as a standard normal non quick charge charger, not as fast as the included 18w charger
Anyone tried the oneplus dash charger with the 20w wireless charging pad? Would it throttle the charging speed?
Anyone tried to put diesel into petrol car? Dash charger and QC is whole different charging concept. Dash charger will work like regular charger(max. [email protected]) on every device except Dash equipped devices.
I am not sure why you're being sarcastic.
If you haven't seen a dash charger, I suggest you go take a look. Even if it works like a regular charger (and I want it to be), its output is 5V/4A.
So my question is whether its output can power the xiaomi 20w wireless pad without throttle. I.e. Full charging capability of the wireless pad.
orawnnd said:
OnePlus Dash Charge : 20W
Xiaomi Mi 9 Boxed charger : 18W
Xiaomi Mi 9 supports QC 4+: 27W
So the charger you get in the box is slightly slower, but you can buy a QC4+ charger for ~25-50€ with 27W.
You could also buy a 20W Qi charger, but if have concerns about damaging your battery this should be your last option imo.
You can charge the Mi9 with the OP Dash Charger and it won't damage your phones. I'm not sure if it actually charges with 20W tho. I also switched from the Oneplus 3 to the Mi9 and when i plug in my dash charger it says "fast charging", but i wouldn't say it is faster then the boxed charger.
Click to expand...
Click to collapse
I believe it's not that simple, OnePlus Dash Charge supports 20W charging, BUT that's 5V 4A.
On the other hand, I believe Mi 9 accept max 2A current, so, if you use original OnePlus Dash Charge, it only charges Mi 9 at max 5V 2A = 10W, much slower than use a standard 18W QC 2.0.....
zachwzx said:
I am not sure why you're being sarcastic.
If you haven't seen a dash charger, I suggest you go take a look. Even if it works like a regular charger (and I want it to be), its output is 5V/4A.
So my question is whether its output can power the xiaomi 20w wireless pad without throttle. I.e. Full charging capability of the wireless pad.
Click to expand...
Click to collapse
Actually I have 4 Dash Chargers. There are tons of articles, topics here on XDA explaining how Dash Charging works a why it's not working on QC devices at 4Amps. For example:
https://forum.xda-developers.com/oneplus-3/accessories/dash-charge-protocol-analysis-t3431917
https://www.guidingtech.com/61180/dash-charging-quick-charge-differences/
Long story short, it delivers 4A only for Dash enabled devices, with Dash cable. To maitain compatiblity with USB standard it can work also as regular 5V/2A charger.
BTW Xiaomi Wirless Pad draw 27W to deliver 20W. Look at the specs, it requires 20V/1,35A input. And you are asking if 5V/4A are enough.
ManuBBXX said:
Hello all
Quick question : is my dash charge charger from my ex One plus 3 will do the job for my xiaomi mi9 ?
It is like this one : https://www.amazon.fr/Chargeur-tabl...rge+oneplus+3&qid=1558015037&s=gateway&sr=8-5
It was extremely fast for the one plus, I wonder if I could damage the battery using it on my MI9
Click to expand...
Click to collapse
I recomend you to install aida64 on playstore , go to battery and plug the phone to the chargers.
It will say how much energy is going into the phone.
Try it with both chargers
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
I think it's just Quick Charge 3.0. You should buy the 27W charger imo. But i could be wrong
I have it, it does quick charge but not charge turbo
Good I stopped by XDA before purchasing it.
It does say if you scroll down on its specs it's a QC4 charger, but I assumed the described output would be a sum of both USB ports working simultaneously.
Already posted about it some weeks ago.
https://forum.xda-developers.com/showpost.php?p=79530777&postcount=73
It's indeed just a QC 4.0 charger. Will only do 18W.
Hi, I have one. For it to work properly you have to have the cable of more than 30w.
Load much faster than the original that comes in the box. I did a quick test from 75% to 100% with the phone turned off and charged in 25min; so you can assume if it's fast or not.
WTF ; does this phone even do QC4 ... the Xiaomi offical charger is 3.0 and I bought a $68 dollars Belkin QC : 4.0+ offical as per reviews and it caps out at. 3470 : it NEVER has said fast or TURBO and it ofen Ampere reports 1800 mah ? Can anyone explain this in any way
Do you really have to post the same thing in every single charger related topic ?
Ataemonus said:
Do you really have to post the same thing in every single charger related topic ?
Click to expand...
Click to collapse
I couldn't find this :/
hardtheory said:
I have it, it does quick charge but not charge turbo
Click to expand...
Click to collapse
Thanks for info dude
I suspect that Turbo Charge only happens with the 27W factory charger.
Because my Hama QC4+ charger, certified by Qualcomm, charges definitely faster than the 18W charger found in the package, but does not say Charge Fast or even Charge Turbo.
twojastara-5 said:
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
Click to expand...
Click to collapse
Call me crazy but I think it will charge the device at 27W speed.
A lot of people don't seem to realize but the "Xiaomi Turbo Charger 27W" is actually QC3, not QC4+, and it does charge the device at 27W. If you find a QC4+ charger that supports 27W and up, you will still get 27W charging but you won't see "Charge Turbo" because it will use the better, newer charging standard.
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
lusp00ky said:
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
Click to expand...
Click to collapse
Yeah but it can only charge at standard QC3 speeds, aka 18W at max. 9V/2A like the original one does. But the original one can also do 12V/1.5A. So it does not "Turbo Charge".
Careful many poster here are confused. My BELKIN true QC4.0+ never ever charged over 3200mA and averaged out at under 2200mA. Posters who speak about things without testing their theories are really frustrating. Do yourself a favor don't believe this phone accepts QC4 or QC 4.0+ (at least not @July 2019) only QC 3.0 NON FAKE xiaomi 27w can do the 4600mA + it would seem. Turbo charging is required for extremely rapid charge times. Make sure you get OFFICIAL 20V 1.35A from Xiaomi for Turbo Charge sustained charge and under one hour 0--100%
I also purchased a QC 4.0+ Hama DC charger cause Xiaomi doesn't make a DC charger to my knowledge. Guess what ; 18w ish charging speeds .. no Fast or Turbo classification ...
XIAOMI Hoe do you call this phone a QC 4.0/4.0+ unit !!! Cause look close at the charger Turbo pictures they are all using the "Original QC 3.0 Xiaomi charger that we ALL should have got in the box. Instead many of us have wasted tonnes of money and time buying useless to us QC 4.0+ tech that doesn't work or WORSE fake chargers that don't do more than 18w !! By the time we we have ordered 3-4 different chargers trying to get it to work we have to order it on Ali or gearbest or Gearvita. Cause the company does make them after all!! Enjoy the brutal shipping fees and heavy wait times. Well we order this and that trying to get the darn thing to work. So annoyed right now
Hi, I got the original charger and this if it gives the turbocharged 27w charge, however the baseus charger charges the same as the one that comes in the box or with the wireless charge.
I made this short video: https://youtu.be/nFBoPxORzEg
https://forum.xda-developers.com/k20-pro/how-to/mi-9t-pro-30w-charger-experiment-t4003595
read this. Also tested with a mi9 that my fried had. same result.( Turbo charging up to 30W using the baseus charger)
Posted for those who end up here like me and read mixed info
I also have the Baseus charger mentioned above (BS-EU906), the variant with 2 usb A ports.
When I charge with the cable from my samsung galaxy tab S5e it charges with a bit over 4200mA 20w-21w.
But when I charge with my Baseus 2m 5a capable cable (CATSS-B0G), it never goes above 3400mA ~14w.
It still chargers fast, but it is not what was advertised. Both the cable and charger are rated for QC3.
Baseus GaN charger 65W + Baseus 5A cable reaches 5000mA in Ampere, which is assuming 5V (that's what Ampere is assuming), equals to 25W. The fact is voltage in QC is never stable, it's the factor that allows it to dynamically supply power based on various parameters: battery temp, device temp, battery capacity and so on. If you have a USB-C USB doctor (and it should be more accurate than any software based monitoring) you can watch yourself that both the voltage and current are alternating constantly.
I got 5v 2a charger (10w) with my phone. I see that it supports 18w. Does it mean that it supports Qualcomm quick charge 3.0? Did you guys got normal charger or fast one?
Sent from my Redmi Note 8 using Tapatalk
In my China model, I got the 18W Quick Charge 3 charger. I might've seen somewhere which says it supports QC4 but it's still 18W
With my Indian model, 18W fast charger is provided which outputs : 5v=3A/9V=2A/12V=1.5A
I also got 10w charger. It does't support 18w, qc3 charging so you have to separately buy 18w qc3 charger.
I have the global version and I only got the 10W charger
Where can u see that , got a MDY-10-EF with mine.
Sent from my Redmi Note 8T using Tapatalk
INFIN1TY- said:
Where can u see that , got a MDY-10-EF with mine.
Sent from my Redmi Note 8T using Tapatalk
Click to expand...
Click to collapse
See "output", it's written on your charger
Sent from my Redmi Note 8 using Tapatalk
Starlord said:
I got 5v 2a charger (10w) with my phone. I see that it supports 18w. Does it mean that it supports Qualcomm quick charge 3.0? Did you guys got normal charger or fast one?
Click to expand...
Click to collapse
It supports 18w fast charger but Xiaomi provided the 18w charger in the box only on Indian varient, but you can always buy the 18w charger online & use that with your phone...
Which 18w charger?
Which 18w charger is recommended? I have global version and 18w charger was not in box.
wellwisher_k said:
Which 18w charger is recommended? I have global version and 18w charger was not in box.
Click to expand...
Click to collapse
Anyone could suggest the link for purchase of 18W charger
Newest compatible 18W QC 3.0 Charger models are:
MDY-10-EF (EU)
MDY-10-EC (US)
5V-3A/9V-2A/12V-1.5A
https://www.aliexpress.com/item/4000450557446.html
Hi guys, I use an original Xiaomi 30w I do not know if it is recommended, it is very fast it takes between 60/70 min 10/100%
I would just say that unless you really need the faster charge, it's probably better for the battery to charge it slower. General suggestion for li-ion batteries though I suppose you can't be sure for this particular case. Maybe 1.8x higher current has no significant effect on battery life.
Hello what is the UK version of the MDY-10-EF charger called ?
Thanks for the link. It's around 6$ in my country locally.
quik charger
hello everyone. can i charge my note8 with a charger.
5v-8v 3a / 8v-9v 2.7a /9v-12v 2a. thank you
is it redmi note 8 supports qc 4.0?
Wysłane z mojego Redmi Note 8T przy użyciu Tapatalka
i wonder if 18W charger is good enough for long lige of the battery life.
i am very skeptical about charging the phone with 18W battery charger,
i am afraid that this charger could harm the life of the battery, so i more in the side that says, i will stay with the 10W typical charger.
Does anybody agree with that?
dslfan said:
i am very skeptical about charging the phone with 18W battery charger,
i am afraid that this charger could harm the life of the battery, so i more in the side that says, i will stay with the 10W typical charger.
Does anybody agree with that?
Click to expand...
Click to collapse
Agree.
18W charger only make the battery getting more heat, which is bad for battery.
I only use 18W charger if I'm in a rush.
Now I'm thinking to get myself a Blackshark funcooler and see if it able to reduce battery temperature while on fast charging.