TWRP on Redmi Go - Android Q&A, Help & Troubleshooting

Why i can't flash TWRP even thought I unlock bootloader
When i boot into recovery it's say "No such file in directory"
I used to try rename recovery.img to twrp.img and run command on powershell
I was successfully to flash TWRP when i rename recovery to twrp. When i flash it's has error need password and i fix it by wide data
When i go to recovery mode, it's go to original recovery and i can't flash again

Related

[Q] fastboot help

hi im getting fastboot mode started
udc_start()
i tried using fast boot reviving post but
im erasing recovery successful
but when i execute fastboot flash recovery recovery.img
im getting an error that not loading recovery.img heip me.......
Try typing the entire path to the recovery file.
follow this to flash custom recovery http://forum.xda-developers.com/showthread.php?t=1318750
for the command "fastboot flash recovery recovery.img", recovery.img refers to the file of your recovery. try doing either:
a) make sure that the name of the recovery file is "recovery.img".
b) change the command "fastboot flash recovery recovery.img" to "fastboot flash recovery (name of the file).img", where (name of the file).img is the actual name of the recovery file (for example, if the name of the file is thunderg.img, the command would be "fastboot flash recovery thunderg.img)

atrix Installing Recovery

Ok, so i found an SBF and unlock went through successfully. I have installed a recovery and it wont boot into it. Not sure why. suggestions? ill update if i figure it out.
Which recovery? How did you install it? fastboot? If you fastboot it did you get a success message in your cmd prompt? Did you check the md5sum? loads of questions, need more info to help. playing tag between the two threads.lol. After you've checked the md5sum (if applicable) on your recovery, rename the recovery to "recovery.img" then 'fastboot flash recovery recovery.img' romracers cwm can be found here at samcripps atrix reboot project, you've probably already found the clockworkmod site, TWRP is also a good recovery as well.
Try installing TWRP Recovery. Just Google TWRP and then go to their homepage, then write in Atrix 4G and then download the .img, after you have done that put it in a directory with fastboot (and rename it to TWRP.img) and then write in
fastboot erase recoery
fastboot flash recovery TWRP.img

[Q] Problem with flashing twrp on Snapdragon RM3

I downloaded the twrp .img from the official website and flashed it using 'fastboot flash recovery twrp.img' and everything was shown Okay in cmd. Then I did 'fastboot reboot' and then after phone rebooted I went to recovery mode using volume up and power button but there was no TWRP there, only stock recovery was there. What went wrong? I flashed many times but same result
I had the same result like yours several weeks ago. And finally choose another method to install TWRP. Try below thread , it is easier.
http://en.miui.com/thread-296053-1-1.html
Your stock rom is replacing stock recovery every time you boot it.
TWRP needs a modified boot image flashed to make it permanent when used with official roms.
http://forum.xda-developers.com/red...official-twrp-3-0-2-0-recovery-redmi-t3352966
If you don't have the modified boot, make sure to boot into TWRP first after flashing it.
Handy way to get TWRP booted is to temporarily boot it using "fastboot boot <name of twrp.img>"
Once booted this way, use it to flash the TWRP image, then reboot into TWRP recovery you just flashed.
Once I had that done, after making a backup, I flashed a custom rom (xiaomi.eu) and TWRP remained permanent for me.
If your wanting to stay on an official rom, see this thread which has an Universal Boot Img Patcher.
Is Your Bootloader Unlocked? Cant flash on a locked BL buddy...
To unlock, follow the Guide y Nivu
http://en.miui.com/forum.php?mod=viewthread&tid=280561&extra=&highlight=no%2Bmore%2Bverify%2Bdevice&page=41
also read reply no. 408
2. DO NOT install the official, unmodified TWRP...
select a TWRP from here
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
I Used the cofface TWRP
3. COPY Twrp.img to internal storage.....
fastboot boot TWRP.img
4. TWRP boots automatically... Press the button on Right to change device language....
Swipe right to allow modifications
5. Go to install... > flash Image. select TWRP.img
tap on reboot.... somewhere there, you will be asked to
1. install SuperSU
2. prevent phone from reverting to original recovery...
Swipe right on both.
Cheers!
When you do the "fastboot reboot" command, you should right away , press the volume + and power buttons together, so the phone boots into TWRP and not into the system. If you just execute the command and let it go , the stock recovery overwrites TWRP.
after entering "fastboot flash recovery twrp.IMG" don't reboot and don't entre "fastboot reboot"....you have to directly press power + vol up...you will able to boot into twrp

twrp installation

Hello guys.
I have been in the android world for a while, but just got this device.
I had tried to install twrp with no success. I already have bootloader unlocked by me with no issues, following a tutorial here. When I flash twrp it shows success but when I try to go there ñ, it just goes to miui recovery. When I boot directly from fastboot with:
Fastboot boot twrp.img
It goes there with no issues but of course, data is encrypted. So I want to install it in order to format my data and be able to root. Any ideas?
I researched and found that one way is to install a dev rom, but I really want to remain on stable one.
Thoughts?
Jemec26 said:
Hello guys.
I have been in the android world for a while, but just got this device.
I had tried to install twrp with no success. I already have bootloader unlocked by me with no issues, following a tutorial here. When I flash twrp it shows success but when I try to go there ñ, it just goes to miui recovery. When I boot directly from fastboot with:
Fastboot boot twrp.img
It goes there with no issues but of course, data is encrypted. So I want to install it in order to format my data and be able to root. Any ideas?
I researched and found that one way is to install a dev rom, but I really want to remain on stable one.
Thoughts?
Click to expand...
Click to collapse
Put a copy of twrp.img in your sdcard.
Put other copy of twrp.img in adb folder of your pc.
Type from a cmd with admin rights with device in fastboot mode connected to pc fastboot boot twrp.img and when you reboot to twrp slide allowing modifications and then flash your twrp.img through same twrp recovery
The first command will do that device can boot to twrp but it´ll not flash it in recovery partition.
The second action will flash it permanently onto your device.
Probably you´ll need to format data in order to can reboot to system again.
SubwayChamp said:
Put a copy of twrp.img in your sdcard.
Put other copy of twrp.img in adb folder of your pc.
Type from a cmd with admin rights with device in fastboot mode connected to pc fastboot boot twrp.img and when you reboot to twrp slide allowing modifications and then flash your twrp.img through same twrp recovery
The first command will do that device can boot to twrp but it´ll not flash it in recovery partition.
The second action will flash it permanently onto your device.
Probably you´ll need to format data in order to can reboot to system again.
Click to expand...
Click to collapse
Thanks! I solved it after taking a look for a while. I do not have an sdcard, so I flashed it and then fastboot booted it, then I reboot recovery to make sure it was flashed and then formatted data. I worked flawlessly!

[Help] Bootloop on Xiaomir Redmi Note 4X

Hello, I'm kind of new at this (this is my first post) so be gentle
So, the last few days I've been trying to install a new rom on my phone (Redmi Note 4X) and the problems started with the model. I only seem to find Redmi Note 4 roms, and as I've come to find, mine is supposed to be the mido one (correct me if I'm wrong though). I have unlocked the bootloader, I have installed and enabled the fastboot on my phone, so the next step was to install the latest TWRP.
There came more problems; I tried doing this through the app and it just wouln't flash it. So I found a guide on how to root my phone and install a new recovery through adb and I followed it. It didn't work. I couldn't find the right twrp version for my phone. When I finally did realise my phone needed mido, I found the latest from the TWRP website. It wouldn't load through adb again. I found a thread about a fixed mido version, which finally worked for me. But my brother who was helping me, and isn't as much of a noob as I am (he has flashed rom and recoveries many times on his Nexus 5X), decided that I necessarily need the latest twrp if I'm going to flash a new rom, so he flashed the new twrp through the old one, and soft bricked my phone (I think). So I'm searching for a guide to unbrick it. (Which I can't seem to find to work at least).
To conclude;
I have unlocked my bootloader
I have access to the fastboot
I tried to flash a recovery
I failed many times, but I managed it
I flashed the latest twrp and bricked my phone
I don't have access to the recovery
My phone is still on a bootloop
I am not sure about which phone model I have
Help!
Thanks in advance.
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Dyt199412syam said:
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Click to expand...
Click to collapse
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
fionik said:
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
Click to expand...
Click to collapse
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Dyt199412syam said:
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Click to expand...
Click to collapse
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
fionik said:
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
Click to expand...
Click to collapse
Share your error please.
Try fastboot boot twrp.img

Categories

Resources