Hey guys, I have a question.
Does anyone here has a problem with the Automatic Brightness on your phone?
I mean, after the Pie update, the minimum brightness of my phone is always changing. This is very particular when I'm in dark room.
A week after the update, the lowest was 10%, then on 2nd week it was around 25-30%. Now it's 18%. I don't understand what's happening.
I have a korean version LGM-V300L.
Thank you.
Did you try to set the minimum brightness manually?
Every time you turn on Auto mode, cover the brightness sensor with your finger, wait a second or two, and set whatever minimum you want (while still covering the sensor).
Blueice87 said:
Did you try to set the minimum brightness manually?
Every time you turn on Auto mode, cover the brightness sensor with your finger, wait a second or two, and set whatever minimum you want (while still covering the sensor).
Click to expand...
Click to collapse
Yes, I did. Still at 18%. All I do now to reach 0 is to set it manually.
Same here. Used to be 11, now 18 percent.
Related
I've seen that the Xperia S has light ambient sensor, but i cant find the configuration to enable auto screen brightness.
Any idea how can i enable it?
I don't think there is a setting for it there wasn't on my arc either
hmm i have read that the auto brightness function is enabled by default, but i dont notice any brightness changes when i enter to a dark room or go out in the day, auto bright function doesnt seem to work.
Anyone can confirm this?
On my SGS2 with CM9 it is under Settings --> Display --> Brightness.
I dont know where it is under Sony ROMs, but somewhere around Display or Energy Saving maybe it has to be, I couldnt imagine that Sony would take out this...
If you want to test it you could light with a lamp direct in the sensor or cover it, then it has to change the Brightness.
you set the lowest screen brightness you want, then the phone does the rest
reidefors82 said:
you set the lowest screen brightness you want, then the phone does the rest
Click to expand...
Click to collapse
not working, just tried. I set my screen brightness to lowest then i put in standby, i went out to the sun and when i turned on the screen and unlocked the device i couldnt see anything.
Also tried with a lamp, doesnt work either
reidefors82 said:
you set the lowest screen brightness you want, then the phone does the rest
Click to expand...
Click to collapse
Exactly. It works just like the iPhone this way.
alberto2008pe said:
not working, just tried. I set my screen brightness to lowest then i put in standby, i went out to the sun and when i turned on the screen and unlocked the device i couldnt see anything.
Also tried with a lamp, doesnt work either
Click to expand...
Click to collapse
Well, if you manually set the brightness to the lowest setting you are gonna get a dark screen. Obvious thing is obvious.
I've recently been to Sony Mobile's headquarters in Redwood, and I got all the details about this explained to me.
The way it works, is that you can manually set a "preferred level" of brightness, and the phone will automatically vary this setting but not stray too far from it. The default value I believe is 50%.. I don't have exact numbers for how much it will differ, but the auto backlighting is there.
I also asked if Sony will add a manual override to this setting in a future FW upgrade, and they said that they might
SEARCH before you post!!! Already discussed (and how to enable it)
It's enabled via the screen brightess toggle. One option is Auto.
http://forum.xda-developers.com/showthread.php?t=1531316&highlight=auto+brightness
http://forum.xda-developers.com/showthread.php?t=1546430&highlight=auto+brightness
Auto brightness... What happened? It used to just work. You know, automatically. If you adjusted the slider it would snap out of Auto mode and lock to what ever you set it at. Going back to full auto was a s simple as selecting the checkbox again in the quick settings.
I don't know if it's part of Marshmallow or TouchWiz but now the brightness slider controls the automatic-ness of the brightness. So its more like a auto "range selector" or "sensitivity selector" it seems. Its more of a semi-automatic mode.
If you set it to ~50% the brightness will adjust +/- 10% around that setting. But it doesn't seem to just automatically do 0-100% on its own anymore.
Set it near 100% and it'll practically refuse to dim in low indoor lighting.
It also seems to respond to whether or not you're holding the phone. It'll get brighter no matter what (thankfully), but it will not lower the screen brightness until you put it down on a horizontal surface... Kind of annoying if you're reading and happen to walk in to a dim room and you're being blinded by your phone until you put it down and then pick it back up. I have Smart Stay turned off so that's not it.
I definitely prefer the plain old, dumb, just works, auto-brightness that I could snap on and off if I needed. Now its...complicated. Why "fix" what isn't broken. Was it confusing some people?
I tried Lux Brightness control app but I'm not sure it's really what I'm looking for. It's too much. I just want "set it and forget it" Automatic (0-100%) brightness like it used to be.
It's a feature. The brightness slider will now bias the automatic setting toward higher or lower brightness while still maintaining the automatic adjustment functionality. Turn off the automatic setting check-box to accomplish full manual control.
What ever happened to just plain Automatic? I don't want to have to mess with a slider. It adjusted the brightness fine before. I find that now it's either too bright or too dim for many situations and I'm constantly messing with the slider. Whereas before, auto was just auto.
Same problem here... It is very annoying
Sent from my SM-G925F using XDA-Developers mobile app
Interestingly, with my old s3 and now my current s6, when looking at battery usage, the screen was always about 15% and usually the second item in the list of things that use the most battery power. It was what I always loved about amoled. Now, screen is number one and comes in at ~50% after the marshmallow update. I wonder if it's because it's always so bright now? Or perhaps they've changed how battery usage is measured. Not much I can do about it. Just an a interesting observation.
Hi
I'm just wondering if anyone else on here is facing the same issue? Or if this is working flawlessly for everyone?
When I have the phone on automatic brightness and go outside on a sunny day, the display will occasionally turn on the maximum brightness mode, but only for about 2-10 seconds and then it goes back to the standard maximum brightness that you can manually adjust it to. It also doesn't go back to the super bright mode after no matter how long I have tried to get it back. I even aimed the screen right towards the sun in hopes the screen would get bright again. The super bright mode works maybe once every time I turn the phone on, and then immediately turns back off, after a few seconds, extremely frustrating.
Is anyone else having this problem or know how to fix it? Maybe there is some way to manually activate the outdoor mode?
Also found this reddit thread with the issue:
https://www.reddit.com/r/lgg5/comments/4g8l4g/g5_in_brightdirect_sunlight_with_autobrightness_on/
Thanks
I also want to have this function manual enable but at the moment I think they don't care about this. The screen is too dim compare with other top phone. I have 2 lg g5 and I think that is the reason I am gonna sell both phones.
It may be too dim in Auto but the maximum brightness is bright enough. I don't need to burn my eyes. The maximum brightness is already too much for day-to-day use.
I do wish :
1. that 100% will be the true 100% of this screen - meaning the brightness boost I get in the sun.
2. the in the display setting, I could set the auto brightness to be + X% of the default value. For example, if I set it to +20%, then if the usual auto mode sets the brightness to 50%, it will actually set it to 60%.
Overall this phone is solid, fast, camera is amazing , sound is good ..Sure, a 3500mah could have been nice but I'm happy.
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
I use an app called Lux. Tons of options with it.
todd3835 said:
I use an app called Lux. Tons of options with it.
Click to expand...
Click to collapse
It doesn't actually lower the brightness some sort of overlay , no?
lowspeed said:
It doesn't actually lower the brightness some sort of overlay , no?
Click to expand...
Click to collapse
Hmmmm, Im not sure how it works but it does have an auto mode which you can tweak on the fly.
I have noticed that also. It also jacks up the contrast to make it easier to see.
It makes pics you took look terrible when viewing them outside. I had to learn to NOT delete them until I check them indoors. I assumed some pics I took were crap at first, but it was just the jacked screen contrast that made them look bad.
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
bandit_knight said:
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
Click to expand...
Click to collapse
That's exactly what happens to me. Also if you slide the screen you can see how it the colors are totally distorted.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
sourabh.note said:
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
Click to expand...
Click to collapse
Did you read what the problem is? outdoors it snaps to max no matter what. (Unless not in auto mode)
Any solution for this problem?
Turn off auto brightness when outdoors..
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brightness mode or shine a led light at the sensor when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time?
haircut123 said:
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brighmess mode or shine a led light at the sending when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time
Click to expand...
Click to collapse
Never had a screen burn in on a Samsung phone. Don't worry
Guys, idk if this is a S10 only feature (or Android Pie), but when I'm on that situation, if I lower the brightness slider and leave it there for a second or two, the brightness will actually stay down and not jump back up again. Worth a try.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
After the S9+'s update to Pie some of the old settings get copied to the new OS, but if you don't go into the settings and check, things might not be configured correctly - I had to choose a different setting and then choose again what was previously selected to ensure that it was written into the Settings correctly.
With the new update the "Automatic Brightness" applies to the AOD - see here in this screenshot, my search of the Settings for the word "auto brightness", see what comes up in attachment #1.
What you need to do is go to the "Adaptive Brightness" and turn it on, then manually adjust your brightness under a few different conditions (EG: Indoors lights off, outside and overcast, and bright sunny day). Now your phone will understand what setting you want for different conditions and automatically adjust the brightness based on lighting conditions, see attachment #2.
The "auto brightness" is now used for the AOD, and has nothing to do with brightness when unlocked. The reason it "auto snaps to full brightness" is likely because previous settings were just copied over after the update and you haven't setup (and trained) the new "Adaptive Brightness" for various light levels. The AOD has both "Auto Brightness" and double-tap the clock to adjust AOD brightness.
Hi guys, how is the auto display brightness setting working
I've set it on automatic (checkbox is enabled), but when i go outside the brightness doesn't change.
I have to raise it manually on the slide down menue.
When going back inside the screen is too bright and i have to lower it again manually.
I can't notice any automatic change.
Phone is 100% stock.
Any ideas?
If you adjust it manualy even ONCE, the automatic brightness gets bugged( or this is how it works, idk).
To get it back working, go to display- and decheck and recheck the automatic and you are good to go.
Thanks for the update.
I would expect the auto adjustment to work again "normally" after closing and re-enabling the screen.
It will work, i encoutered the same problem after i manually adjusted it.
Well, honestly it's a pretty complicated procedure to get it right, you need to go to your average lighting place of use, I mean, if you are mostly in a dark room, you set the brightness as comfortably as you can, and leave it there, if you check the sliding bar for the Brightness while changing ambient light conditions it should move automatically, but it will only do it between a range, it should adjust the situation based on a comparison between the light conditions you setted up and the actual.
So, maybe if you go from a totally dark room to a sunny beach at noon, you won't see enough adjustment on the brightness because the algorithm isn't as smart to see that, it only moves certain percentage, in that you situation you should need to play a little bit with the brightness, something like setting up the dark place with more brightness in order to get a little more when you change to a very bright place.
I think it got better with the update today.
Put it on full brightness when leaving the office due to the sun.
After installing the update it went to almost lowest brighness.
Hope it goes back up tomorrow morning and its no coincidence.