Samsung Galaxy J6+ (J610F) Help me please - Android Q&A, Help & Troubleshooting

(Please take your time reading this as i want a fix for this problem)
Hello,I tried to root my samsung j6+ using TWRP recovery and magisk but it was not successful
So i decided to install a fresh stock rom, Downloaded the rom and odin and everything was good, When i got to flashing something happened while it was fllashing my phone went off and the flash failed, i tried to unplug and plug it again and my phone keeps rebooting constantly on a screen saying an error has occurred while updating the device software , When i unplugged the phone it turns off and doesn't boot when i try to power it on
The power button literally does nothing and can't even boot into recovery mode
when i charge my phone or plug it into my laptop it just keeps rebooting on the screen i mentioned and i can't do anything

Related

[Q] how do i save my phone? stuck in empty battery screen

i was previously using this rom, [ROM][MIUI][21/10] cMIUI 2.10.19 [4.1.2][AOSP][OTA][Aroma][Multi][Super Stable] and tried to flash it back to the stock rom (DXLPB).
i used odin to flash it back and apparently the operation failed and i got into the screen where it shows the "firmware upgrade had encountered an issue...." message.
when i tried flashing the rom again the operation always fail because the usb keeps disconnecting every 20 seconds and connecting again.
so i tried flashing the rooting file ( the one that i used to flash in odin in order for it to root ) and this time my phone went into recovery mode.
i cleared the cache and wipe the phone data and rebooted it.
apparently the phone doesnt go into any screen anymore other then the empty battery icon when i plug it into the com. if i unplug it, the phone will be stuck in the same screen until i take out the battery.
usb is not detected, odin not detected also.
i cant switch it to download or recovery mode either.
i tried using the heimdel package but it wouldnt work because the phone cant be detected either
is there anyway to save my phone??
please help! thanks in advance.
i tried getting it into download mode and the screen shows "LOW BATTERY!! CAN'T DOWNLOAD!" screen. unfortunately, i cant seems to charge my phone also. plug into the pc and charger for hours, doesnt seem to charge. its not the cable's fault. i got many cables, tried all of them. any help??
Try another battery (best charged). If you have an old backup use it.

[Q] I-9300 bootloop and no recovery

Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Varjo said:
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Click to expand...
Click to collapse
You can Try this:
1.) Pull out battery
2.) Put it in again
3.) Press Vol up + home + power
4.) When the Samsung Logo appears let it off
I think you press the Buttons too long.
I had the same problem!
S1ay3r666 said:
I think you press the Buttons too long.
Click to expand...
Click to collapse
i really tried everything, it's not working. btw with i am stuck at the very first image, where it says "samsung Galaxy sII GT-I9300".
i dont think it's just the way i press the buttons because i can reach it on my s1 and s2 without a problem, it's just not working on this device.
could some setting like "nand erase all" in odin help? in other threads there is sometimes mentioned that the internal file system might be screwed up and in those cases a simple odin reflash does not help anymore...
Nand erase will usually hard brick it. Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Click to expand...
Click to collapse
thx, but i already did that (multiple times) and flashing via odin always succeeds. then the phone reboots and is stuck at the first samsung galaxy s.. screen. twice i managed somehow to get into recovery (after flashing cwm6) but it then randomly rebooted.
and i dont think that the power button is stuck because when i am in download mode it is perfectly fine it never reboots itself unexpectedly.
Had a similar issue on my tab2 p3100. It all happened when I tried flashing a custom recovery from rom manager.
A bad flash of anything related to recovery or bootloader could be a probable cause.
I remember a knowledge share on one of the threads describing this issue and as mentioned on it all I had to do is this:
1) switch off the device and plug in the charger. This would light up the display showing you the charging status. The status has to show if at least your bootloader part of the phone is fine.
2) plug out the charger and immediately press the three buttons (home + vol up + power) get into recovery mode. This step has to work and help you get to recovery mode.
***Note : the interval within which this step has to be performed is too short since the display would turn off immediately as soon as you plug out the charger. A bit tricky too so you have to be fast. If this misses getting you into recovery, pull out the battery and put it back again. Repeat step1 and 2 again.
3) upon successfully getting into recovery, perform wipe data, cache and select reboot phone from option available on recovery again.
Allow the device to boot. This could take a while since you have performed a data wipe and may prompt for first time set up.
I was able to restore functionality on my tab after these steps and like ppl learn from their mistakes, I then learnt that recoveries and bootloaders are things that needs to be done with a pc only.
Worth a try if you have tried other alternatives and found no go. may help. Who knows..
all the best.
thats also not working. i tried to get into recovery since two days now...
i also tried the steps from this thread: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
but again, after i flash the cf-root (successfully) the phone does neither boot into recovery by itself nor can i do it by hand...
its crazy... in download mode i can see the model number (GT-I9300) and i thought as long as the model number is there and i can enter download mode there should be a way to recover the device.
but i cannot think of anything to try that i have not done yet
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Click to expand...
Click to collapse
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Varjo said:
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gala...-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..

stuck on twrp logo after reset

My phone is a verzon note 2 on deodox 4.3 with twrp recovery. The phone only boots to teamwin logo and flickers on and off. my computer will not recognize my phone either at this point.This is what happened. Ive been having some 4g lte loss and unstable wifi issues to i decided to do a factoty reset. when i rebooted into recovery i was stuck at the twrp logo and it would constantly bootloop the twrp logo.. I restarted my phone and did a factory reset from under the general setting. At that point it rebooted int the twrp but continued to just stay at the logo and would not go into recovery. I pulled the battery and restarted the phone but from that point on it would only boot into the twrp logo and stay there. I can get into download mode but my pc (win7) no longer recognizes the phone so i cant attempt to fix this in odin. Im not sure what to do to get this phone to work properly at this point.
yoda254 said:
My phone is a verzon note 2 on deodox 4.3 with twrp recovery. The phone only boots to teamwin logo and flickers on and off. my computer will not recognize my phone either at this point.This is what happened. Ive been having some 4g lte loss and unstable wifi issues to i decided to do a factoty reset. when i rebooted into recovery i was stuck at the twrp logo and it would constantly bootloop the twrp logo.. I restarted my phone and did a factory reset from under the general setting. At that point it rebooted int the twrp but continued to just stay at the logo and would not go into recovery. I pulled the battery and restarted the phone but from that point on it would only boot into the twrp logo and stay there. I can get into download mode but my pc (win7) no longer recognizes the phone so i cant attempt to fix this in odin. Im not sure what to do to get this phone to work properly at this point.
Click to expand...
Click to collapse
My guess is that when you rooted with CASUAL, it changed the Samsung device driver on your computer and you need to reinstall the Samsung driver to get the computer to recognize the phone again in download mode.
Underneath step 7 of section 1b on Droidstyle's restore guide, he discusses issue with CASUAL replacing the Samsung driver... and he gives a link to Jeremy Loper's fix... "If odin no longer recognizes your device, most likely Casual killed the driver for odin!! follow this tutorial for restoring the driver: http://www.youtube.com/watch?v=zzghcV8HVVk"
Once the computer recognizes the phone again, you should be able to use ODIN to restore back to 4.1.2 so you can root/unlock again with CASUAL. After you get the phone restored with Odin, I would recommend booting into Stock Recovery and wiping cache/doing factory reset before running Casual again... this would enure you are starting over with a totally clean slate.
If the above doesn't work, then here's a thread where I tried to help someone else who couldn't get their computer to recognize the phone.... maybe some of those ideas will help - http://forum.xda-developers.com/showthread.php?p=55833998
Good luck!!
1 step forward two steps back. I got my pc /odin to recognizes my note 2(changed usb cords). Then tried to odin back to stock 4.1.2. At first odin kept saying (odin not responding) and would ask to close the program,after several attemps i final got it to flash the 4.1.2 file. When i flashed the file and was at the point where it reboots, it would not get past the samsung note 2 logo and continued to flicker and not boot up even when i tried to put it into download mode like it said to in this thread. http://forum.xda-developers.com/showthread.php?t=2024207. When i tried to reflash the file it failed. when i attempted again it just hangs at setupconnection. Tried again and it failed. Btw thanks for the help mattnmag.
Got it working! i simply forgot to place the sch-i605 pit. into the pit section of odin when i flashed the 4.1.2 rom.
Similar problems
I was running AllianceROM 26. My phone had been spontaneously rebooting for a bit recently. Today, it started to spontaneously reboot again, but this time, it never got past the Galaxy Note 2 screen. After pulling the battery, I tried to boot into TWRP. It just hangs on the twrp boot screen for a few minutes but never goes into twrp.
I figured I would try taking it back to stock. So, I used ODIN to try and put 4.1.2 on it and a new PIT file. That appeared to work fine. I got no errors in ODIN. However, I still cannot get this thing to get past these boot screens, either the Galaxy Note 2 one or TWRP when I try that there. I have tried this twice now, once with re-partition checked and another time with re-partition unchecked (saw conflicting instructions on that so I figured I would try it both ways). I still am not getting past the boot screen.
Any help or ideas are appreciated as right now, my phone appears to be bricked and I am out of ideas.
so what was the solution to the teamwin flashing on and off after a factory reset? this is certainly not a solution, having to reflash the phone...

Nearly softbricked my S6 edge, f.... up from time to time

Hi
Rooted my S6, and threw TWRP recovery on, put a "sixperience S7" rom on it, at first it worked flawlessly, but since I didnt make a factory reset i pulled one later, thats when my problems started.
Installs fine, reboots and the initial start and setup goes fine, but when the screen turns off and i wake it up again, the screen looked like a pc screen with no gfx driver, funky colors and very dark - tried two times to make a clean install, same happened
Tried to install stock rom with Odin, failed, tried 3-4 times, fails
Then i went into TWRP and deleted all......but seriously all......coudnt boot into anything then, not even download mode, got the message on the screen that "something went wrong in updating the firmware, try the emergency recovery with Samsung Smart Switch" That of course couldnt connect to the phone, when i finally got it to be recognized by the computer, my phone wasn't supported by the program (because it is rooted i read somewhere)
After an hour with a lot of swearing and crying almost, I tried to connect it to Odin and i got connected, installed a new TWRP and i got it into recovery where i could install a new rom, and the phone booted again
Heres my question, when i put it into download mode (tried to install stock rom with Odin once more) then I cannot boot it again, I have to install TWRP and a new rom before I can get it up and running again, is there any possibility to get a stock rom installed ever again?

Ulefone power 3 bootloop

Hi All
I have a ulefone power 3 which isnt modified at all , my problem is its stuck in a boot loop and not sure what to do
when i hold up and power and go into recovery it just keeps rebooting so cannot do anything, kinda new to any kind of flashing but does anyone have any ideas on what i need to do please
thanks
I think you need to flash your phone like this : http://ulefone.com/download/power3.html
same with power 3s
UPDATE: It was possible to flash the phone, but now i have some "shifted" lines on my display
UPDATE2: After performing an wireless update, everything works fine again (without twrp)
Hi, I have the same problem,
Ulefon Power 3s, after i tried to install twrp (everything worked like in the deskription at https://forum.xda-developers.com/android/development/ulefone-power-3-twrp-3-2-1-0-root-t3741853)
The phone is stuck in a bootloop (Orange State like https://img.xda-cdn.com/2fPFK8gGwJxzn2rNTC6VzDxvLI8=/https://i.imgur.com/tLOV7sz.jpg?1)
When i press the power and volume up button the screen stays black and the phone still stays inthe bootloop.
Right now I am not able to stop this bootloop.
My tools are also to big to disconnect the batery.
I am not able to connect with my computer at this time.
I asked the smae at the twrp thread.
Any suggestions?
Thanks!
Hello i have the same problem i think this version of twrp do not work with the lastet firmwares from ulefone. I think the twrp have an issue with the rom version v40...
I also stuck in the bootloop and the only thing that i could do was a new flash...

Categories

Resources