[Q] how do i save my phone? stuck in empty battery screen - Galaxy S II Q&A, Help & Troubleshooting

i was previously using this rom, [ROM][MIUI][21/10] cMIUI 2.10.19 [4.1.2][AOSP][OTA][Aroma][Multi][Super Stable] and tried to flash it back to the stock rom (DXLPB).
i used odin to flash it back and apparently the operation failed and i got into the screen where it shows the "firmware upgrade had encountered an issue...." message.
when i tried flashing the rom again the operation always fail because the usb keeps disconnecting every 20 seconds and connecting again.
so i tried flashing the rooting file ( the one that i used to flash in odin in order for it to root ) and this time my phone went into recovery mode.
i cleared the cache and wipe the phone data and rebooted it.
apparently the phone doesnt go into any screen anymore other then the empty battery icon when i plug it into the com. if i unplug it, the phone will be stuck in the same screen until i take out the battery.
usb is not detected, odin not detected also.
i cant switch it to download or recovery mode either.
i tried using the heimdel package but it wouldnt work because the phone cant be detected either
is there anyway to save my phone??
please help! thanks in advance.

i tried getting it into download mode and the screen shows "LOW BATTERY!! CAN'T DOWNLOAD!" screen. unfortunately, i cant seems to charge my phone also. plug into the pc and charger for hours, doesnt seem to charge. its not the cable's fault. i got many cables, tried all of them. any help??

Try another battery (best charged). If you have an old backup use it.

Related

[Help] Won't Boot into ANY mode

I bought my Galaxy Note II right after it came out, and after a few months, I had unlocked the bootloader, rooted the phone, and installed the Mean Bean ROM. I ran it with ZERO problems until...
Yesterday my phone dies after the battery is fully discharged, and when I plug it in, all I see is the pre-boot battery, as if it is about to charge, but the circular loading symbol is dead in the middle, frozen. The LED light up top won't do anything either.
I could get it into recovery and download mode, although the battery would not charge, so the phone had to be plugged in no matter what. Did a clean wipe and tried reflashing the ROM, then I tried flashing both the stock roms from stockroms.net for the Verizon Note 2. Every flash failed.
I went into download mode to try and flash the stock roms via Odin, but Odin wouldn't recognize my phone. Reinstalled the Samsung Mobile Drivers (yes the correct ones), tried using the Toolkit, but no matter what, Odin wouldn't recognize my phone. No comport number, nothing.
Next, I took out the usb charging port in the phone, made sure nothing was damaged or unplugged, and put it back it. No change. Went to bed frustrated as all hell.
This morning, I tried everything again a second time, and the next thing I know, hours later, the phone shows 11% battery in recovery mode, but no change otherwise. This whole time, I've been using Team Win Recovery Project, so I decide to switch to ClockWorkMod. I get the file on the sd card, put it into the phone, and...
Nothing. That 11% disappeared apparently. Now I cannot boot into recovery mode or download mode, let alone get the frozen battery indicator. What now?
Could be the charging port is damaged. About 2 months ago my phone looked like it was charging when I plugged it in (would show charging indicator), but really wasn't. Called Verizon and got a warranty replacement.
Sent From My Sticky Note, Too?

Galaxy J5 bricked and home button broken

I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
alberto1251 said:
I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
Click to expand...
Click to collapse
To enter in to the download mode you can use JIG USB which looks like this :
https://images-na.ssl-images-amazon.com/images/I/41MhETGCbBL.jpg
You can buy that jig USB on E-Bay
or you can use this tool but little Warning !!!
https://app.box.com/s/ktb9rzxde78lujqioh3rbmh6w39gedmm
File was scanned against viruses and it has some , maybe because like that he make your device in download mode.
https://www.virustotal.com/sr/file/...33ff7dceef468c2e8c325d79c7ad43fc8c1/analysis/
Here is video how to use .
https://www.youtube.com/watch?v=2er95HkiJbo
Good Luck
I'll try with the usb jig. Still don't know if buy the resistance and make one or just buy the jig. Then i will see if i can get for odin to detect the phone, using some kind of witchcraft or whatever hahahaha.
Thanks, I will set the thread as solved.
Good Luck

Samsung weird problems

Hello guys, i come to you with a problem with my phone. I've a Samsung J7 Prime SM-G610M/DS with Stock ROM.
Everything started when a new update came to install like a week ago. It downloaded it correctly and started update process.
In the middle of it, it ran out of battery.. So it began..
1) The phone is practicaly not charging. If i plug it to an USB port or directly to the wall, charges like 6% every 24 hours. Sometimes it doesn't charge at all. Note: whenever i plug it, the battery-charging animation does not work properly. Just turns the battery icon with the lightning in it and then turns off the screen, not showing battery percentage or animation whatsoever. Battery is non removable and tried cleaning charge port.
2) If i put it on Download Mode, computer doesn't recognize it. It is not a drivers issue. I've another Samsung J7 Prime and it connects correctly. I must discard everything Odin-related.
3) In recovery mode, i've emptied cache and did several factory resets with no luck. If i turn it in a regular way, it tries to apply some update but changes to "No command" view.
4) I tried downloading the last stock version and putting it on an SD. Formatted it correctly but when i try to update from SD in recovery, a message comes up: "Couldn't mount /sdcard".
I'm starting to loose my mind here guys.. Please give a hand or a clue!!
Thank you very much.

Galaxy s6 active SM-G890a constant boot loop, cannot access recovery mode.

The phone has successfully been flashed with a few different firmwares since the bootloop started occurring. the phone will only power on when the cable is plugged in but it will show the samsung screen and then start the "Installing system update" screen and then instantly go to "No command" and then boot back to the samsung screen to repeat the process. download mode is accessible but i cant get into recovery mode to reset the cache or perform a factory wipe.
The cable is fine and the usb port on the phone let me flash software via odin so i don't understand why it only powers on with a cable plugged in.
Could this be a battery issue? i'm very new to this website and the software end of phone repair stuff so any help is greatly appreciated!
i'm currently running 7.0 firmware G890AUCS7DRF2 from boxwares but the bootloop has been occurring since before i even tried to flash anything.
Also, all of my drivers seem to be up to date so i don't think that's posing any issues.
Thanks so much in advance!
Hi , try to clean the charging port of your phone with 100% alcohol and with clean toothbrush also you can use needle to clean the usb port contact.
Another what you can do is to put your phone into the charger for abot 30 minutes and see if your phone is become to hot on the back side what can be sign of bad charging port or probably dead battery .

Samsung Galaxy J6+ (J610F) Help me please

(Please take your time reading this as i want a fix for this problem)
Hello,I tried to root my samsung j6+ using TWRP recovery and magisk but it was not successful
So i decided to install a fresh stock rom, Downloaded the rom and odin and everything was good, When i got to flashing something happened while it was fllashing my phone went off and the flash failed, i tried to unplug and plug it again and my phone keeps rebooting constantly on a screen saying an error has occurred while updating the device software , When i unplugged the phone it turns off and doesn't boot when i try to power it on
The power button literally does nothing and can't even boot into recovery mode
when i charge my phone or plug it into my laptop it just keeps rebooting on the screen i mentioned and i can't do anything

Categories

Resources