Related
Hi, I used fastboot to boot TWRP without flashing it (using fastboot boot twrp.img). Foolishly of me when exit TWRP I was asked to disabled Stock Recovery wich I swiped yes. Now my stock recovery is gone. How do I enable it via TWRP again without having to flash it? or what are my options? phone functionlity was not afected, just the stock recovery.
thanks.
imho you either use twrp OR stock recovery. so in my opinion youve done all right.
Download fastboot image.. extract boot.img from it. Boot in TWRP using fastboot .. then install->install image->boot.img(file you extracted)->flash->choose recovery, not boot when where to flash->done.
If it doesn't work then flash the whole fastboot image with mitool.
h0LLe said:
imho you either use twrp OR stock recovery. so in my opinion youve done all right.
Click to expand...
Click to collapse
dragneelfps said:
Download fastboot image.. extract boot.img from it. Boot in TWRP using fastboot .. then install->install image->boot.img(file you extracted)->flash->choose recovery, not boot when where to flash->done.
If it doesn't work then flash the whole fastboot image with mitool.
Click to expand...
Click to collapse
I ended up flashing the whole image beacuse it bricked when using the command "fastboot oem lock".
any idea why it bricked? i did flash a stock recovery before in order to lock it again.
After rooting it im interested in locking the bootloader again. Maybe I skipped a procedure in order to lock the bootloader again??
Right now im rooted, phone working, stock recovery (since I flashed a fastboot image with SP tools) and unlocked bootloader but I want to lock it without bricking it again.
thanks.
pach33 said:
I ended up flashing the whole image beacuse it bricked when using the command "fastboot oem lock".
any idea why it bricked? i did flash a stock recovery before in order to lock it again.
After rooting it im interested in locking the bootloader again. Maybe I skipped a procedure in order to lock the bootloader again??
Right now im rooted, phone working, stock recovery (since I flashed a fastboot image with SP tools) and unlocked bootloader but I want to lock it without bricking it again. (i lock bootloader for my friend which has redmi 3s)
thanks.
Click to expand...
Click to collapse
To lock bootloader again you must flash stock image via fastboot with "lock bootloader" bat file (it is in stock image flashtool zip). But why U need to lock bootloader? i dont see sense to do it.
dromaczek said:
To lock bootloader again you must flash stock image via fastboot with "lock bootloader" bat file (it is in stock image flashtool zip). But why U need to lock bootloader? i dont see sense to do it.
Click to expand...
Click to collapse
Hi, thanks for the answer, I want to lock it because some features got disabled when unlocking the bootloader, like xiaomis "Find mi Device". I also read that having the bootloader unlocked may compromise your data security.
pach33 said:
Hi, thanks for the answer, I want to lock it because some features got disabled when unlocking the bootloader, like xiaomis "Find mi Device". I also read that having the bootloader unlocked may compromise your data security.
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh: funniest thing i read on the internet today
chandradeepdey01 said:
:laugh::laugh::laugh::laugh: funniest thing i read on the internet today
Click to expand...
Click to collapse
He write only true! He could "read that having the bootloader unlocked may compromise your data security" :laugh::laugh::laugh::laugh::laugh:
chandradeepdey01 said:
:laugh::laugh::laugh::laugh: funniest thing i read on the internet today
Click to expand...
Click to collapse
dromaczek said:
He write only true! He could "read that having the bootloader unlocked may compromise your data security" :laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Glad I made you guys laugh. :good: Next time I will better use the noob friendly Q&A.
pach33 said:
Glad I made you guys laugh. :good: Next time I will better use the noob friendly Q&A.
Click to expand...
Click to collapse
Woah, didn't mean to offend you bro. It was sarcasm.
It is replaced not disabled...
Hello,
I can't enable the oem unlock from developer options, i understand that i have to do a factory reset. When i do it, it stuck at 0%, i let it all the day. If someone can help me please
kaoutar19 said:
Hello,
I can't enable the oem unlock from developer options, i understand that i have to do a factory reset. When i do it, it stuck at 0%, i let it all the day. If someone can help me please
Click to expand...
Click to collapse
Please, someone can help me ? i am bloqued
kaoutar19 said:
Please, someone can help me ? i am bloqued
Click to expand...
Click to collapse
Hallo there
Just a few questions first, are you trying to reset factory settings through the phone settings app or are you trying trough eRecovery?
Cheers,
AS
ars_chelsea said:
Hallo there
Just a few questions first, are you trying to reset factory settings through the phone settings app or are you trying trough eRecovery?
Cheers,
AS
Click to expand...
Click to collapse
Thank you. I tried to reset through the setting and through eRecovery, for both, the reset stuck at 0%. Bootloader is unlocked, FRP is locked. I can't toggle the button to enable OEM unlocking.
Are you using phone with working sim, or without? Why I ask about sim? If not working sim card, then a lot phones will not give OEM unlock option, once it was for me with Sony phone, after I inserted sim needet to wait weak and only then OEM unlock option was accessable.
What are your phone full model ? Like, ane-lx1c432b166
Arnys said:
Are you using phone with working sim, or without? Why I ask about sim? If not working sim card, then a lot phones will not give OEM unlock option, once it was for me with Sony phone, after I inserted sim needet to wait weak and only then OEM unlock option was accessable.
What are your phone full model ? Like, ane-lx1c432b166
Click to expand...
Click to collapse
No, when i inser the sim card, i can't activate the sim through the parameteres (Erreur activation), that's why i wanted to reset it and install new firmware.
kaoutar19 said:
No, when i inser the sim card, i can't activate the sim through the parameteres (Erreur activation), that's why i wanted to reset it and install new firmware.
Click to expand...
Click to collapse
ok, didnt give full ph0ne model, dont need, can go and find all you need yourself : from this : https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
7. dload package
In this site you can search for firmware by Huawei P20 Lite or directly by your device oem name (ANNE-L01, ANNE-L03, ANNE-L21, ANNE-L22, ANNE-L23, etc...
http://androidhost.ru/search.html
Download the firmware that match with your device and unzip.
Under folder Software you will found the folder dload, copy this folder to sdcard.
Under folder ReleaseDoc you will find a Software Upgrade Guideline.docx, read it.
User data will be wiped.
Update is done with stock recovery
If your Bootloader is currently unlocked at the end it will be changed to lock state.
i gues you have your bootloader code, you can even use older package, adn reset your phone using this dload method!!
Arnys said:
ok, didnt give full ph0ne model, dont need, can go and find all you need yourself : from this : https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
7. dload package
In this site you can search for firmware by Huawei P20 Lite or directly by your device oem name (ANNE-L01, ANNE-L03, ANNE-L21, ANNE-L22, ANNE-L23, etc...
http://androidhost.ru/search.html
Download the firmware that match with your device and unzip.
Under folder Software you will found the folder dload, copy this folder to sdcard.
Under folder ReleaseDoc you will find a Software Upgrade Guideline.docx, read it.
User data will be wiped.
Update is done with stock recovery
If your Bootloader is currently unlocked at the end it will be changed to lock state.
i gues you have your bootloader code, you can even use older package, adn reset your phone using this dload method!!
Click to expand...
Click to collapse
Thank you for your answer, so i downloaded the latest version ANE-LX1 8.0.0.147(C109) Europe, copy the dload folder on sd card. Did a forced upgrade, the upgrade stuck at 5%
kaoutar19 said:
Thank you for your answer, so i downloaded the latest version ANE-LX1 8.0.0.147(C109) Europe, copy the dload folder on sd card. Did a forced upgrade, the upgrade stuck at 5%
Click to expand...
Click to collapse
Hi again
Sorry not answering earlier...But I do think Mr.Arnys is gonna take care of this. About the forced upgrade, try resetting the caches first.
Cheers,
AS
ars_chelsea said:
Hi again
Sorry not answering earlier...But I do think Mr.Arnys is gonna take care of this. About the forced upgrade, try resetting the caches first.
Cheers,
AS
Click to expand...
Click to collapse
I makes software installation failed i have custom rom Morfuz
kaoutar19 said:
I makes software installation failed i have custom rom Morfuz
Click to expand...
Click to collapse
Oh you have a custom ROM? So your bootloader is unlocked ok... In that case, install the stock recovery .img via fastboot(if you need a guide I can provide it) as soon as you can and then try to install the dload package again
Cheers,
AS
ars_chelsea said:
Oh you have a custom ROM? So your bootloader is unlocked ok... In that case, install the stock recovery .img via fastboot(if you need a guide I can provide it) as soon as you can and then try to install the dload package again
Cheers,
AS
Click to expand...
Click to collapse
Thanks for your replay . Where i can find the stock recovery .img ? The bootloader is unlocked, frp locked. I have to use the same method ? i put only the .img file on dload folder ? Thank you for your help
try to restore your phone using eRecovery, when restart phone, there are text your device unlocked cant trust, pres 3 sec volume upt o enter e recovery, enter in it, conect to wifi, download and instal stock..
Arnys said:
try to restore your phone using eRecovery, when restart phone, there are text your device unlocked cant trust, pres 3 sec volume upt o enter e recovery, enter in it, conect to wifi, download and instal stock..
Click to expand...
Click to collapse
I have getting package info failed
kaoutar19 said:
Thanks for your replay . Where i can find the stock recovery .img ? The bootloader is unlocked, frp locked. I have to use the same method ? i put only the .img file on dload folder ? Thank you for your help
Click to expand...
Click to collapse
Hallo again,
Ok so for the stock recovery you can download it on the thread by ciubi93, on this link https://mega.nz/#!SR9RzKST!dhXS0yC-p_SvWu-SYYLaop1aRFzSulLVrnSXCVVJiGI after you download this, download the fastboot adb tools - here's a link of the xda for that https://www.xda-developers.com/install-adb-windows-macos-linux/ after you did that guide from xda, copy the stock recovery into that folder and then press shift+right click of your mouse on the folder and select "open powershell window here (in case of windows 10) or in case of windows 7 (open command prompt window here)" , if you have a power shell window then power off your device then press power ON + volume down and type on the window ".\fastboot flash recovery recovery_ramdisk.img ", after this you have your stock recovery successfully reset and you can now flash the official dload package, try it via power ON + Volume down + Volume up at the same time until the huawei logo disappears and then you release.
I really hope this helps cause I tried this a lot on mine.
Cheers,
AS
error remote Command not allowed
Hello, i tried this command in the fastboot mode, i have the error remote Command not allowed.
kaoutar19 said:
Hello, i tried this command in the fastboot mode, i have the error remote Command not allowed.
Click to expand...
Click to collapse
Hi there
Yeah I forgot you have FRP locked....My bad....Anyway, can you tell me the current build you have and the one you want to install? Example: C17 8.0.0.140
Because if you try to install a different firmware which is not from your country you need to change your oem info first.
Cheers,
AS
---------- Post added at 10:47 ---------- Previous post was at 10:36 ----------
Also if you had it unlocked I assume you have the unlock code with you, in that case try this first:
Relock the bootloader using fastboot command "fastboot oem relock *codehere* " this will erase all DATA, it will do an hard reset, be sure to backup first!
After that, you can unlock the bootloader again via fastboot command "fastboot oem unlock *codehere*" and then it will unlock both bootloader and FRP
Cheers,
AS
ars_chelsea said:
Hi there
Yeah I forgot you have FRP locked....My bad....Anyway, can you tell me the current build you have and the one you want to install? Example: C17 8.0.0.140
Because if you try to install a different firmware which is not from your country you need to change your oem info first.
Cheers,
AS
---------- Post added at 10:47 ---------- Previous post was at 10:36 ----------
Also if you had it unlocked I assume you have the unlock code with you, in that case try this first:
Relock the bootloader using fastboot command "fastboot oem relock *codehere* " this will erase all DATA, it will do an hard reset, be sure to backup first!
After that, you can unlock the bootloader again via fastboot command "fastboot oem unlock *codehere*" and then it will unlock both bootloader and FRP
Cheers,
AS
Click to expand...
Click to collapse
Hm, if I'm correct, you can't unlock bootloader, if frp are locked, frp will be unlocked, when you allow OEM unlock under developer options.
Only thing there can do, connect with mofuz ROM developer to help return to stock, otherwise our suggestions will not work, because all I know is for stock emui.
But yeah, with right phone build number he shulda be able to return to stock with no problem, so, does he know what was stock emui build he had before started to play with phone..??!!
And, can download all dload packages and try them all, no harm if it fails, but maybe some will reflash system as it should be
Arnys said:
Hm, if I'm correct, you can't unlock bootloader, if frp are locked, frp will be unlocked, when you allow OEM unlock under developer options.
Only thing there can do, connect with mofuz ROM developer to help return to stock, otherwise our suggestions will not work, because all I know is for stock emui.
But yeah, with right phone build number he shulda be able to return to stock with no problem, so, does he know what was stock emui build he had before started to play with phone..??!!
And, can download all dload packages and try them all, no harm if it fails, but maybe some will reflash system as it should be
Click to expand...
Click to collapse
You can't unlock FRP when you have the booloader unlocked yes I know, but what I said is for him to relock first and then unlock it again Once he unlocks again the FRP will become unlocked, I looked into this thread for that and they also confirmed it works here's the proof if you have doughts quoting @clsA "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options":
Here's the thread (check @gopinaidu77 post and then the answers after that):
https://forum.xda-developers.com/honor-5x/help/remove-frp-lock-fastboot-t3530220/page2
Cheers,
AS
ars_chelsea said:
You can't unlock FRP when you have the booloader unlocked yes I know, but what I said is for him to relock first and then unlock it again Once he unlocks again the FRP will become unlocked, I looked into this thread for that and they also confirmed it works here's the proof if you have doughts quoting @clsA "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options":
Here's the thread (check @gopinaidu77 post and then the answers after that):
https://forum.xda-developers.com/honor-5x/help/remove-frp-lock-fastboot-t3530220/page2
Cheers,
AS
Click to expand...
Click to collapse
I locked and relocked the bootloader, now i can only access to the recovery or to the fastboot. In the recovery, anything i do like reset, my phone reboot again to the recovery, in the fastboot mode i can't relock the bootloader, need to access to the phone to enable developer options. I tried to do a hard reset or an update with dload, nothing work, always rebooting to the recovery. My phone is broken now
I unlocked my mate20 pro, but problem is now i can't relock it , even I use "fastboot oem relock +unlock code"
anybody can help ?
have you tried fastboot oem lock?
you don't have to specify the code
i just tried also and cannot lock
Daniehabazin said:
have you tried fastboot oem lock?
you don't have to specify the code
Click to expand...
Click to collapse
still can't relock..................wait for solution
richard_li said:
still can't relock..................wait for solution
Click to expand...
Click to collapse
Refer to my post here ?
https://forum.xda-developers.com/ma...ocking-bootloader-magisk-root-t3885422/page22
I accidentally relocked the phone by using the hstool method of flashing a full firmware.
it does relock the phone and required me to unlock it again using the fastboot oem unlock code
xeroxide said:
I accidentally relocked the phone by using the hstool method of flashing a full firmware.
it does relock the phone and required me to unlock it again using the fastboot oem unlock code
Click to expand...
Click to collapse
That's interesting. So all your data was wiped when you used the hstool?
Someone else said flashing firmware via dload method also relocks the bootloader.
hmm i'm not sure.
I'll explain the whole situation.
I had just unlocked the bootloader and installed magisk.
after installing magisk, I installed a few modules, one of which made my phone bootloop.
I managed to get back into fastboot mode, use hstool to select my firmware (224) along with the patched hisuite from funkyhuawei.
after my phone recovered, it seems to have been completely reset and locked.
*edit*
I guess I should also add, I've never installed TWRP on this phone, only patched the recovery_ramdis.img for Magisk
xeroxide said:
hmm i'm not sure.
I'll explain the whole situation.
I had just unlocked the bootloader and installed magisk.
after installing magisk, I installed a few modules, one of which made my phone bootloop.
I managed to get back into fastboot mode, use hstool to select my firmware (224) along with the patched hisuite from funkyhuawei.
after my phone recovered, it seems to have been completely reset and locked.
*edit*
I guess I should also add, I've never installed TWRP on this phone, only patched the recovery_ramdis.img for Magisk
Click to expand...
Click to collapse
After locking, can you use the same code to unlock it again ?
EagleEye92 said:
After locking, can you use the same code to unlock it again ?
Click to expand...
Click to collapse
Yes sure
EagleEye92 said:
After locking, can you use the same code to unlock it again ?
Click to expand...
Click to collapse
Yes
ok just an update, while mucking around I accidentally softbricked my phone.
I used the external usb method (where you update using the code *#*#2846579#*#*) and it 100% relock the phone.
*edit*
and yes, the same code works to unlock it again. KEEP THE CODE SAFE!
xeroxide said:
ok just an update, while mucking around I accidentally softbricked my phone.
I used the external usb method (where you update using the code *#*#2846579#*#*) and it 100% relock the phone.
*edit*
and yes, the same code works to unlock it again. KEEP THE CODE SAFE!
Click to expand...
Click to collapse
Can you say me something about the usb method? dont know, what this is. :silly:
ClintP said:
Can you say me something about the usb method? dont know, what this is. :silly:
Click to expand...
Click to collapse
You need an external usb-c drive with some firmware on it.
I initially used v187 from this thread
https://forum.xda-developers.com/mate-20-pro/how-to/firmware-update-187-brings-oem-unlock-t3897301
Since then I downloaded a v206 which works over USB but I cannot recall where I got it from.
Note that you will loose all user data since the phone will be fully wiped.
Also this method requires a phone that is working, as in able to boot and access the dialer and menus.
If I find out where I got the v206 I will post it here as well.
I should also add, maybe it might work with a memory card as well... But this method requires an external source for the firmware since it formats the entire phone
@ xeroxide Thx for your help.
I Try this at the weekend.
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
deepsrd said:
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
Click to expand...
Click to collapse
Now it works well... i relocked my phone..........but i don't know why i failed last time because i followed exactly the steps...
deepsrd said:
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
Click to expand...
Click to collapse
richard_li said:
Now it works well... i relocked my phone..........but i don't know why i failed last time because i followed exactly the steps...
Click to expand...
Click to collapse
it means now relocked and problem solved.........
deepsrd said:
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
Click to expand...
Click to collapse
this worked for me thanks loads!
Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
I then tried to restart my phone and ended up in bootloop.
Fastboot, stock recovery accessible.
Tried draining the battery and then charging it and booting but no luck.
Tried 'fastboot erase cache' from minimal adb but failed.
i DO NOT want to lose my data, Is there a way to get a backup of the internal storage pls help ASAP.
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
Fastboot ROM can't be flashed without unlocking the bootloader. He has locked BL.
OP you can't do anything now sadly. All data will be wiped, and only way to reset phone is factory reset. Approach nearest service centre maybe they can help in some way.
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
LostLust said:
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
Click to expand...
Click to collapse
Flash the latest global stable fastboot ROM via Mi Flash Tool.
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
Tried flashing stock rom via fastboot but failed with error
error:Erasing 'boot' FAILED (remote: 'erase is not allowed in lock state')
Is there any other way? Can i unlock bootloader while being stuck in bootloop?
same problem with me stuck at 90.49 while updating . you found any solution?
nikkxx11 said:
same problem with me stuck at 90.49 while updating . you found any solution?
Click to expand...
Click to collapse
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
me.icon18 said:
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
Click to expand...
Click to collapse
how much time did they take to reset ? and did they charge you anything?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
nikkxx11 said:
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
Click to expand...
Click to collapse
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
i'm trying this method. and my bootloader has unlocked before
First, OP stated that
Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
Click to expand...
Click to collapse
Soft bricked device can be recovered by simply fastboot.
But with locked bootloader, it is hard to recover your device because now it is hard bricked. You can do EDL Flashing but you need authorized mi account and certain tools to do that.
Your last resort for now is to bring your device to a Xiaomi certified service center, they have the right tools for the job.
Has anyone here tried to relock the bootloader? I am thinking about buying an s7 plus and giving this away. I know that knox is permanently broken, but do not want to give away the tablet rooted (or I will be come tech support). What I would want to remove beside root is the warning message on boot.
@tensux
Hey dude,
do you achieved to relock the bootloader then ?
If yes did you use the fastboot "oem re-lock" command ?
Please let me know, thanks.
Arobase40 said:
If you want to re-lock your bootloader you have to go in Download mode. If with Android 11 or above don't forget to attach your tablet onto a PC before switching to Download mode, then long press with Volume Down button. Change are your system will be erased before it reboots so don't forget to backup everything before unless you don't care...
Click to expand...
Click to collapse
Thank you for quick reply man.
So it's the same as unlocking,
and the oem button into the developer option,
should switch itself off ?
Dadditz said:
@tensux
Hey dude,
do you achieved to relock the bootloader then ?
If yes did you use the fastboot "oem re-lock" command ?
Please let me know, thanks.
Click to expand...
Click to collapse
Sorry to burst your bubble, but Samsung devices don't have fastboot, they only have download mode (Odin). You can relock them by reflashing stock firmware most of the time.
Were you able to relock the bootloader, I’m looking to do the same. Any assistant ace would be helpful
chochoking said:
Were you able to relock the bootloader, I’m looking to do the same. Any assistant ace would be helpful
Click to expand...
Click to collapse
Hi man,
next month I will try to re-lock the bootloader and return the tablet to factory condition. As soon as I do I will post step by step how I did.
Cheers
@chochoking
Hello,
well, starting from a rooted device, without TWRP,
last firmware android 11 build T865XXS5CUL1_T865OXM5CUL1_ITV.
DO A BACKUP OF YOUR STUFF,
process will delete everything.
I download the same firmware and unzip it
into a folder on my pc.
Remove all the accounts and securities.
Reboot the device into Download mode
and via Odin3 (v.3.1.14) install the same
firmware (use csc not home csc)
and reboot into system (will factory reset the tablet).
Boot again in Download mode and
keeping vol up enter the relock bootloader section.
After relocking the teblet, it will factory reset again
and reboot into system.
Done.
Do your upgrades and reset your securities.
Cheers
Thank you for your instructions! I had a question, did the warning message disappear after relocking the bootloader?
Dadditz said:
@chochoking
Hello,
well, starting from a rooted device, without TWRP,
last firmware android 11 build T865XXS5CUL1_T865OXM5CUL1_ITV.
DO A BACKUP OF YOUR STUFF,
process will delete everything.
I download the same firmware and unzip it
into a folder on my pc.
Remove all the accounts and securities.
Reboot the device into Download mode
and via Odin3 (v.3.1.14) install the same
firmware (use csc not home csc)
and reboot into system (will factory reset the tablet).
Boot again in Download mode and
keeping vol up enter the relock bootloader section.
After relocking the teblet, it will factory reset again
and reboot into system.
Done.
Do your upgrades and reset your securities.
Cheers
Click to expand...
Click to collapse
DartGerion said:
Thank you for your instructions! I had a question, did the warning message disappear after relocking the bootloader?
Click to expand...
Click to collapse
I'm glad to see your reply and as for the warning message
go straight dude, it disappears completely.
Best regards