Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
I then tried to restart my phone and ended up in bootloop.
Fastboot, stock recovery accessible.
Tried draining the battery and then charging it and booting but no luck.
Tried 'fastboot erase cache' from minimal adb but failed.
i DO NOT want to lose my data, Is there a way to get a backup of the internal storage pls help ASAP.
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
Fastboot ROM can't be flashed without unlocking the bootloader. He has locked BL.
OP you can't do anything now sadly. All data will be wiped, and only way to reset phone is factory reset. Approach nearest service centre maybe they can help in some way.
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
LostLust said:
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
Click to expand...
Click to collapse
Flash the latest global stable fastboot ROM via Mi Flash Tool.
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
Tried flashing stock rom via fastboot but failed with error
error:Erasing 'boot' FAILED (remote: 'erase is not allowed in lock state')
Is there any other way? Can i unlock bootloader while being stuck in bootloop?
same problem with me stuck at 90.49 while updating . you found any solution?
nikkxx11 said:
same problem with me stuck at 90.49 while updating . you found any solution?
Click to expand...
Click to collapse
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
me.icon18 said:
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
Click to expand...
Click to collapse
how much time did they take to reset ? and did they charge you anything?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
nikkxx11 said:
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
Click to expand...
Click to collapse
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
i'm trying this method. and my bootloader has unlocked before
First, OP stated that
Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
Click to expand...
Click to collapse
Soft bricked device can be recovered by simply fastboot.
But with locked bootloader, it is hard to recover your device because now it is hard bricked. You can do EDL Flashing but you need authorized mi account and certain tools to do that.
Your last resort for now is to bring your device to a Xiaomi certified service center, they have the right tools for the job.
Related
Hi I have a redmi note 3 pro which I flashed with xiaomi flasher. Everything worked and the phone boots up but it lost wifi and sensors. I have read about this problem but I can't seem to find a solution. Can someone please help me?
eltarod said:
Hi I have a redmi note 3 pro which I flashed with xiaomi flasher. Everything worked and the phone boots up but it lost wifi and sensors. I have read about this problem but I can't seem to find a solution. Can someone please help me?
Click to expand...
Click to collapse
Download fastboot rom
Extract it to folder
Find persist.img file
Copy it to some other place.
Now u need unlocked bootloader to flash persist.img file
If u already have unlocked boot loader then Put phone in fastboot mode
Open cmd
Use below fastboot commands to flash persist file
fastboot devices
fastboot flash persist persist.img
fastboot reboot
Black_Stark said:
Download fastboot rom
Extract it to folder
Find persist.img file
Copy it to some other place.
Now u need unlocked bootloader to flash persist.img file
If u already have unlocked boot loader then Put phone in fastboot mode
Open cmd
Use below fastboot commands to flash persist file
fastboot devices
fastboot flash persist persist.img
fastboot reboot
Click to expand...
Click to collapse
Is there any other way with locked bootloader and edl mode to flash persist.img?
eltarod said:
Is there any other way with locked bootloader and edl mode to flash persist.img?
Click to expand...
Click to collapse
Why ? u cant unlock bootloader officialy?
---------- Post added at 04:52 PM ---------- Previous post was at 04:45 PM ----------
If not fastboot mode then u can flash img file using orange fox twrp
Install fox twrp
Boot in fox recovery.
Select .img file
Select persist partition
And flash it
And reboot
https://orangefox.tech/download/kenzo/
I guess I can even without wifi.. I could use sim data to input a mi account.. But it would take some days. I was hoping for a quicker solution. If not then I will do as you say.
eltarod said:
I guess I can even without wifi.. I could use sim data to input a mi account.. But it would take some days. I was hoping for a quicker solution. If not then I will do as you say.
Click to expand...
Click to collapse
No permission need to apply.
Just Turn on sim data
. And Try to add account in developer option. See if can be successfully added in developer option > miunlock status.
Let me know if u getting 20091 error in developer option.
First I flashed persist with fastboot commands. Everything was successful but still the same problem. Then I installed OrangeFox TWRP with fastboot commands. Booted straight up to recovery and flashed the image as you said to persist partition. Selected to reboot to system and stays stucked at MI logo with no loading. Any ideas?
eltarod said:
First I flashed persist with fastboot commands. Everything was successful but still the same problem. Then I installed OrangeFox TWRP with fastboot commands. Booted straight up to recovery and flashed the image as you said to persist partition. Selected to reboot to system and stays stucked at MI logo with no loading. Any ideas?
Click to expand...
Click to collapse
Ur imei and baseband is showing ?
Black_Stark said:
Ur imei and baseband is showing ?
Click to expand...
Click to collapse
Don't know now since the phone is dead. I will have to flash a firmware. Will tell after I wake up phone with firmware.
Here is something new.. I transfered a .zip firmware to phone and tried to flash with ORangeFOx but nothing happens. I get an error. Checked and the phone can't see the Data partition. Should I flash firmware with edl mode?
eltarod said:
Here is something new.. I transfered a .zip firmware to phone and tried to flash with ORangeFOx but nothing happens. I get an error. Checked and the phone can't see the Data partition. Should I flash firmware with edl mode?
Click to expand...
Click to collapse
Ur phone kenzo or kate ??
Flash right fastboot rom on right device.
Install telegram app chat on redmi note 3 community group. It will be faster to know and fix ur issue.
U can install app on pc or phone.
https://t.me/rn3dev
how to lock bootloader on Mi A3?
thanks
danger2u said:
how to lock bootloader on Mi A3?
thanks
Click to expand...
Click to collapse
Code:
fastboot flashing lock
All data will be deleted. Reset
Vip02 said:
Code:
fastboot flashing lock
All data will be deleted. Reset
Click to expand...
Click to collapse
thank u very much
works great
Hi, I write again here, sorry. Can anyone help me with the block bootloader procedure? I want to try custom roms and unlock bootloader is simple, but if I want to restore the phone like new, like when you open the box, what do I have to do? Anyone can help me step by step? Thank you so much
I have the bootloader unlocked and Stock rom official, to take advantage of the warranty what is the procedure to relock the bootloader. I read in this thread to fastboot and run: fastboot flash lock
Has no contraindications?
can you also use mi flash tool and flash_all_lock.sh script?
Thanks
Switch to partition A, run flash_all.bat from the latest fastboot rom, start the phone. If it boots correctly, lock the bootloader with fastboot flashing lock command or run flash_all_lock.bat
Thanks.
hi I want to root mia3 and I unlock the bootloader then root unsuccesfull
and phone start up but hang and wifi not work I try to flash stock rom 3-4 different rom flashed sucessfully but when start up no data delete and phone is on menu
I relock bootloader phone say system destroyed
I flash phone
now phone not start up and go to fastboot directly
please help me
khzrxda said:
hi I want to root mia3 and I unlock the bootloader then root unsuccesfull
and phone start up but hang and wifi not work I try to flash stock rom 3-4 different rom flashed sucessfully but when start up no data delete and phone is on menu
I relock bootloader phone say system destroyed
I flash phone
now phone not start up and go to fastboot directly
please help me
Click to expand...
Click to collapse
Visit service center.
_mysiak_ said:
Visit service center.
Click to expand...
Click to collapse
I switch to partition a
active slot a
phone now is on but problem still is and not solve
wifi not work and hng
khzrxda said:
I switch to partition a
active slot a
phone now is on but problem still is and not solve
wifi not work and hng
Click to expand...
Click to collapse
If you were able to switch partitions, then you did not lock your bootloader.
Reflash full stock Android 10 ROM, it might solve your wifi issues.
Need help.. cant turn on my Phone.. always stuck at android one Logo and fastboot (when i try hold volume up and power )
i rooted phone (adb,twrp,magisk) . Everything well good, but WIFI didn't work. Then i get in TWRP and maybe deleted partition A and B( ) i can't get through the Fastboot.
my mi a3 is V10.3.6.0.PFQMIXM version-- and cant Flash it with miflash tool, it says error : can not found file flash_all_lock.bat
now i cant find my device with Adb devices (its says List of devices attached)
pls help :/ thank you.
Go to nearest service centre
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying to flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
evanB70 said:
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
Click to expand...
Click to collapse
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
ticmali said:
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
Click to expand...
Click to collapse
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
evanB70 said:
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
Click to expand...
Click to collapse
yes, I had mobile data on. thanks
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Try my Procedere,i try it Yesterday and works:
-set SLOT B and install twrp
-then boot to TWRP recovery and Flash TWRP.zip again
-reboot to twrp recovery (Check If you on SLOT B ...)
-wipe Cache,system,Data
-flash Rom HAVOC
-flash TWRP
-reboot in TWRP again,then...
Set SLOT A!
-flash Gapps
-flash FDE
-Format Data
-Reboot to to System and wait when HAVOC done
Reboot to TWRP then Flash and root Magisk 20.2 in SLOT A, Reboot...
Done!
tried flashing my mi a3 to stock now stuck in fastboot mode
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
mewcatchew said:
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
Click to expand...
Click to collapse
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Negative. still stuck in fastboot mode
mewcatchew said:
Negative. still stuck in fastboot mode
Click to expand...
Click to collapse
Change the active slot to 'a' and reboot.
garylawwd said:
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Click to expand...
Click to collapse
msatyanarayana said:
Change the active slot to 'a' and reboot.
Click to expand...
Click to collapse
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
mewcatchew said:
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
Click to expand...
Click to collapse
Try to unlock bootloader once again through fastboot and after that you can change the slot.
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
this command is not working for me it is giving error of unknown command
msatyanarayana said:
Try to unlock bootloader once again through fastboot and after that you can change the slot.
Click to expand...
Click to collapse
it wont allow me to< says phone is in locked state
123123123...123 said:
this command is not working for me it is giving error of unknown command
Click to expand...
Click to collapse
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
123123123...123 said:
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
Click to expand...
Click to collapse
managed to get into EDL mode by shorting the pinouts, but still cant flash stock ROM cuz apparently xiaomi has to authorize it (ie i dont have permission to unbrick it). This is the first and last xiaomi phone I'll ever buy - never had a phone where there was no option i had to unbrick it. going to ****in smash it to peices!
I felt sorry that no one did help these people,
go to fastboot and run windows commands in twrp folder and type as following :
- option one:
fastboot devices
./fastboot set_active b
./fastboot erase boot
./fastboot set_active a
./fastboot erase boot
fastboot flashing unlock (optional)
fastboot Flash boot [put twrp name].img or go to mi flash to install stock rom. or unzip the stock rom from bat file run it
or try the second option:
https://ibb.co/w6bcG5g
islam=salam=peace=paix
We Want MSM tool for Realme XT stock rom .ofp file flashable
Please help after relocking bootloader boot image destroyed can't boot error
naandha114 said:
Please help after relocking bootloader boot image destroyed can't boot error
Click to expand...
Click to collapse
Chill, most of us see this when we wipe and install cutsom rom...
Download the following
1) TWRP for XT
2)OZIP stock rom for XT from relame site
Now flashing steps
3)Use commands in bootloader
fastboot devices --> check its detected
fastboot flash recovery recovery,img --> where recovery.img is the TWRP image file
now use volume button to boot into recovery
4) in recovery choose options wipe
wipe cache,system,vendor,data
also use Format data and select yes to wipe out data
5) reboot to recovery
6) now using a ozip file from pendrive or SD card flash it..enjoy stock rom
Im writing this as there is no guide in this forum for above issue to recover
Regards,
Diaz Michael
diazneoones82 said:
Chill, most of us see this when we wipe and install cutsom rom...
Download the following
1) TWRP for XT
2)OZIP stock rom for XT from relame site
Now flashing steps
3)Use commands in bootloader
fastboot devices --> check its detected
fastboot flash recovery recovery,img --> where recovery.img is the TWRP image file
now use volume button to boot into recovery
4) in recovery choose options wipe
wipe cache,system,vendor,data
also use Format data and select yes to wipe out data
5) reboot to recovery
6) now using a ozip file from pendrive or SD card flash it..enjoy stock rom
Im writing this as there is no guide in this forum for above issue to recover
Regards,
Diaz Michael
Click to expand...
Click to collapse
Can't boot into fastboot
naandha114 said:
Can't boot into fastboot
Click to expand...
Click to collapse
Did you try with Vol down + power button option for fastboot ?
If your fastboot is broken you would need to go service center to hard flash them
Regards,
Diaz Michael
Unbrick realme XT with MSM tool
Hi friends,
I recently tried to unlock bootloader of Realme XT running on Android 10, Realme Ui.
I successfully unlocked the bootloader with official method and I installed Twrp. Now comes the issue, after 1st reboot, the Twrp was replaced by stock recovery, so I again tried to flash, but there was write error and I couldn't flash back using adb.
Now, the mistake, so I thought why not to repeat the same process again, that is again locking the bootloader and repeating all the steps. I forgot the I shouldn't do it with adb and use the official method.
I put the command in adb to relock bootloader and my bootloader crashed saying it's destroyed. I couldn't get into recovery nor fastboot with any of the method. After doing a lot of research I found the MSM tool for flashing with the crack but it didn't serve the purpose.
Afterwards, I took remote help of one of service person paid him online, he also used MSM tool, but he was having username and password, and one my realme XT again started working.
The day I am able to use MSM tool in cracked condition will be able to take risks of rooting again.
Thanks for listening to the story.
Regards,
Tausif Sayyed
tausif55555 said:
Hi friends,
I recently tried to unlock bootloader of Realme XT running on Android 10, Realme Ui.
I successfully unlocked the bootloader with official method and I installed Twrp. Now comes the issue, after 1st reboot, the Twrp was replaced by stock recovery, so I again tried to flash, but there was write error and I couldn't flash back using adb.
Now, the mistake, so I thought why not to repeat the same process again, that is again locking the bootloader and repeating all the steps. I forgot the I shouldn't do it with adb and use the official method.
I put the command in adb to relock bootloader and my bootloader crashed saying it's destroyed. I couldn't get into recovery nor fastboot with any of the method. After doing a lot of research I found the MSM tool for flashing with the crack but it didn't serve the purpose.
Afterwards, I took remote help of one of service person paid him online, he also used MSM tool, but he was having username and password, and one my realme XT again started working.
The day I am able to use MSM tool in cracked condition will be able to take risks of rooting again.
Thanks for listening to the story.
Regards,
Tausif Sayyed
Click to expand...
Click to collapse
That great man
Please can help other who has problem
{Mod edit: Quoted post deleted}
Is there a contact in the telegram?
sergpolov said:
{Mod edit: Quoted post deleted}
Is there a contact in the telegram?
Click to expand...
Click to collapse
Can you send me the contact please
locuas0130 said:
can you send me the contact please
Click to expand...
Click to collapse
+**************************************
so yesterday as I was flashing a custom rom for my device I found out that the hotspot wasn't working, I've look for solution across the internet and have found out that flashing persist.img on persist partition via twrp shall do the work, I did the same as instructed in the post downloaded the same file which I didn't confirm if it was really for my device, so after that my phone is stuck on an endless bootloop if I try to reboot to system luckily both fastboot and recovery was still accessible so I tried flashing another rom, stock, and even run flashrom.bat via fastboot but that didn't seem to fix it, now I'm only left with flashing stock img via miflash tool and hope it work for me, I can't really afford to pay anyone to fix it not at the moment and I want to atleast try to troubleshoot it somehow, what other options am I left with? hope I can get some answers
jannny24 said:
so yesterday as I was flashing a custom rom for my device I found out that the hotspot wasn't working, I've look for solution across the internet and have found out that flashing persist.img on persist partition via twrp shall do the work, I did the same as instructed in the post downloaded the same file which I didn't confirm if it was really for my device, so after that my phone is stuck on an endless bootloop if I try to reboot to system luckily both fastboot and recovery was still accessible so I tried flashing another rom, stock, and even run flashrom.bat via fastboot but that didn't seem to fix it, now I'm only left with flashing stock img via miflash tool and hope it work for me, I can't really afford to pay anyone to fix it not at the moment and I want to atleast try to troubleshoot it somehow, what other options am I left with? hope I can get some answers
Click to expand...
Click to collapse
If your bootloader is unlocked and you can access fastboot mode then you can flash it using miflash without auth
mvikrant97 said:
If your bootloader is unlocked and you can access fastboot mode then you can flash it using miflash without auth
Click to expand...
Click to collapse
mvikrant97 said:
If your bootloader is unlocked and you can access fastboot mode then you can flash it using miflash without auth
Click to expand...
Click to collapse
thanks, it was nervewracking as miflash failed to boot my phone twice, it turns out I just have to flash persist.img from the fastboot rom separately on orangefox and that did the work