Redmi note 3 pro lost Wifi/BT/Sensors - Xiaomi Redmi Note 3 Questions & Answers

Hi I have a redmi note 3 pro which I flashed with xiaomi flasher. Everything worked and the phone boots up but it lost wifi and sensors. I have read about this problem but I can't seem to find a solution. Can someone please help me?

eltarod said:
Hi I have a redmi note 3 pro which I flashed with xiaomi flasher. Everything worked and the phone boots up but it lost wifi and sensors. I have read about this problem but I can't seem to find a solution. Can someone please help me?
Click to expand...
Click to collapse
Download fastboot rom
Extract it to folder
Find persist.img file
Copy it to some other place.
Now u need unlocked bootloader to flash persist.img file
If u already have unlocked boot loader then Put phone in fastboot mode
Open cmd
Use below fastboot commands to flash persist file
fastboot devices
fastboot flash persist persist.img
fastboot reboot

Black_Stark said:
Download fastboot rom
Extract it to folder
Find persist.img file
Copy it to some other place.
Now u need unlocked bootloader to flash persist.img file
If u already have unlocked boot loader then Put phone in fastboot mode
Open cmd
Use below fastboot commands to flash persist file
fastboot devices
fastboot flash persist persist.img
fastboot reboot
Click to expand...
Click to collapse
Is there any other way with locked bootloader and edl mode to flash persist.img?

eltarod said:
Is there any other way with locked bootloader and edl mode to flash persist.img?
Click to expand...
Click to collapse
Why ? u cant unlock bootloader officialy?
---------- Post added at 04:52 PM ---------- Previous post was at 04:45 PM ----------
If not fastboot mode then u can flash img file using orange fox twrp
Install fox twrp
Boot in fox recovery.
Select .img file
Select persist partition
And flash it
And reboot
https://orangefox.tech/download/kenzo/

I guess I can even without wifi.. I could use sim data to input a mi account.. But it would take some days. I was hoping for a quicker solution. If not then I will do as you say.

eltarod said:
I guess I can even without wifi.. I could use sim data to input a mi account.. But it would take some days. I was hoping for a quicker solution. If not then I will do as you say.
Click to expand...
Click to collapse
No permission need to apply.
Just Turn on sim data
. And Try to add account in developer option. See if can be successfully added in developer option > miunlock status.
Let me know if u getting 20091 error in developer option.

First I flashed persist with fastboot commands. Everything was successful but still the same problem. Then I installed OrangeFox TWRP with fastboot commands. Booted straight up to recovery and flashed the image as you said to persist partition. Selected to reboot to system and stays stucked at MI logo with no loading. Any ideas?

eltarod said:
First I flashed persist with fastboot commands. Everything was successful but still the same problem. Then I installed OrangeFox TWRP with fastboot commands. Booted straight up to recovery and flashed the image as you said to persist partition. Selected to reboot to system and stays stucked at MI logo with no loading. Any ideas?
Click to expand...
Click to collapse
Ur imei and baseband is showing ?

Black_Stark said:
Ur imei and baseband is showing ?
Click to expand...
Click to collapse
Don't know now since the phone is dead. I will have to flash a firmware. Will tell after I wake up phone with firmware.

Here is something new.. I transfered a .zip firmware to phone and tried to flash with ORangeFOx but nothing happens. I get an error. Checked and the phone can't see the Data partition. Should I flash firmware with edl mode?

eltarod said:
Here is something new.. I transfered a .zip firmware to phone and tried to flash with ORangeFOx but nothing happens. I get an error. Checked and the phone can't see the Data partition. Should I flash firmware with edl mode?
Click to expand...
Click to collapse
Ur phone kenzo or kate ??
Flash right fastboot rom on right device.
Install telegram app chat on redmi note 3 community group. It will be faster to know and fix ur issue.
U can install app on pc or phone.
https://t.me/rn3dev

Related

[RECOVERY]TWRP 3.2.1-0 for Red Magic

On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable OEM unlocking.
unlock bootloader and flash twrp
Code:
fastboot oem nubia_unlock NUBIA_NX609J
Code:
fastboot flash recovery recovery.img
download
https://drive.google.com/open?id=1VzUS999ZS_yc6GtcKngA6GrlTpOZp2P5
Sources
https://github.com/youyim123/android_device_nubia_nx609j
Came up in Chinese, but everything is working after changing the language setting over. Thanks.
Hi friends, if I would like return to Stock Recovery, ¿Where I find stock recovery and How flash?
Thanks for this work
Hi, someone can help me? Thnaks
sakilxda said:
Hi, someone can help me? Thnaks
Click to expand...
Click to collapse
Finally I resolved this problem. I found other Recovery.img working
sakilxda said:
Hi friends, if I would like return to Stock Recovery, ¿Where I find stock recovery and How flash?
Thanks for this work
Click to expand...
Click to collapse
Ok, I´m resolved this.
If you need install Stock Recovery you need download a Oficial Stock firmware "Zip" and extract the Stock recovery to the this "Zip" file, and you repeat this metod with Stock Recovery
Am I the only one having problems with fastboot on Windows 10?
sakilxda said:
Hi, someone can help me? Thnaks
Click to expand...
Click to collapse
bro i need fastboot drivers please
in mi system dont hace driver and y my devices onlye hace android =( help me me has win10
Sorry, long time ago tha I haven´t visited XDA.
I have used the drivers of video´s link but i had to test many drivers. It was very dificult for my too.
Actually I don´t know wich was the drives that i used, sorry.
if you have once used some fastboot drivers for some device on windows 10, chances are most probably you will have issues with detecting other devices in fastboot mode . Either boot with linux or reinstall windows 10 is the only solution imho
sakilxda said:
Finally I resolved this problem. I found other Recovery.img working
Click to expand...
Click to collapse
Please provide this working twrp which solved this problem..as i am also facing the same issue
munmun said:
Please provide this working twrp which solved this problem..as i am also facing the same issue
Click to expand...
Click to collapse
Hello, have you visited my video link? There, there is different links in the description that you can find the recovery I used. It's long time ago and maybe is actualliced now.
sakilxda said:
Hello, have you visited my video link? There, there is different links in the description that you can find the recovery I used. It's long time ago and maybe is actualliced now.
Click to expand...
Click to collapse
When i try to reboot in twrp it boots into recovery for 2-3 sec and then again reboots to system
munmun said:
When i try to reboot in twrp it boots into recovery for 2-3 sec and then again reboots to system
Click to expand...
Click to collapse
Maybe your Recovery isn't good.
Try flash one more time or another recovery
Same issue I m face. When I flash twrp then go to recovery mode. Then they off and start with stock revery. And mobile repat lock bootloader
---------- Post added at 05:03 PM ---------- Previous post was at 05:01 PM ----------
I m try all official twrp. But face same issue
sakilxda said:
Maybe your Recovery isn't good.
Try flash one more time or another recovery
Click to expand...
Click to collapse
I have tried multiple..but unable to boot into recovery...it would be very helpful of you if you could provide that recovery that worked on your phone.
As i am also unable to boot into recovery with command "fastboot boot recovery.img"
munmun said:
I have tried multiple..but unable to boot into recovery...it would be very helpful of you if you could provide that recovery that worked on your phone.
As i am also unable to boot into recovery with command "fastboot boot recovery.img"
Click to expand...
Click to collapse
Sorry but this was long ago and I can't remember.
munmun said:
I have tried multiple..but unable to boot into recovery...it would be very helpful of you if you could provide that recovery that worked on your phone.
As i am also unable to boot into recovery with command "fastboot boot recovery.img"
Click to expand...
Click to collapse
Try this one: http://www.mediafire.com/file/45qwt6i4ccdnjd0/recovery.img/file
you need first to unlock bootloader (you need to be in bootmode):
fastboot oem nubia_unlock NUBIA_NX609J
Just after that you can flash recovery.img:
fastboot flash recovery recovery.img
After this you can go back to recovery from boot menu navigating with up/down key and confirm with Power button!
:fingers-crossed:
ABM30 said:
Try this one: http://www.mediafire.com/file/45qwt6i4ccdnjd0/recovery.img/file
you need first to unlock bootloader (you need to be in bootmode):
fastboot oem nubia_unlock NUBIA_NX609J
Just after that you can flash recovery.img:
fastboot flash recovery recovery.img
After this you can go back to recovery from boot menu navigating with up/down key and confirm with Power button!
:fingers-crossed:
Click to expand...
Click to collapse
I have tried this as well but twrp boots up for a 2-3 sec & then phobe reboots to system again..
With fastboot boot recovery.img, same results are seen
munmun said:
I have tried this as well but twrp boots up for a 2-3 sec & then phobe reboots to system again..
With fastboot boot recovery.img, same results are seen
Click to expand...
Click to collapse
which ROM do you have installed?
There is a chance to need to flash an original recovery (you can find it in original 8.1 ROM from Nubia), than boot in recovery and erase cache and data (IT WILL ERASE ALSO INTERNAL MEMORY!...SO BACK UP) and than unlcok bootloader, flash TWRP, flash ROM, flash bluespark boot.img

stuck on Fastboot (mi a3)

Need help.. cant turn on my Phone.. always stuck at android one Logo and fastboot (when i try hold volume up and power )
i rooted phone (adb,twrp,magisk) . Everything well good, but WIFI didn't work. Then i get in TWRP and maybe deleted partition A and B( ) i can't get through the Fastboot.
my mi a3 is V10.3.6.0.PFQMIXM version-- and cant Flash it with miflash tool, it says error : can not found file flash_all_lock.bat
now i cant find my device with Adb devices (its says List of devices attached)
pls help :/ thank you.
Go to nearest service centre
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying to flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
evanB70 said:
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
Click to expand...
Click to collapse
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
ticmali said:
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
Click to expand...
Click to collapse
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
evanB70 said:
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
Click to expand...
Click to collapse
yes, I had mobile data on. thanks
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Try my Procedere,i try it Yesterday and works:
-set SLOT B and install twrp
-then boot to TWRP recovery and Flash TWRP.zip again
-reboot to twrp recovery (Check If you on SLOT B ...)
-wipe Cache,system,Data
-flash Rom HAVOC
-flash TWRP
-reboot in TWRP again,then...
Set SLOT A!
-flash Gapps
-flash FDE
-Format Data
-Reboot to to System and wait when HAVOC done
Reboot to TWRP then Flash and root Magisk 20.2 in SLOT A, Reboot...
Done!
tried flashing my mi a3 to stock now stuck in fastboot mode
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
mewcatchew said:
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
Click to expand...
Click to collapse
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Negative. still stuck in fastboot mode
mewcatchew said:
Negative. still stuck in fastboot mode
Click to expand...
Click to collapse
Change the active slot to 'a' and reboot.
garylawwd said:
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Click to expand...
Click to collapse
msatyanarayana said:
Change the active slot to 'a' and reboot.
Click to expand...
Click to collapse
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
mewcatchew said:
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
Click to expand...
Click to collapse
Try to unlock bootloader once again through fastboot and after that you can change the slot.
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
this command is not working for me it is giving error of unknown command
msatyanarayana said:
Try to unlock bootloader once again through fastboot and after that you can change the slot.
Click to expand...
Click to collapse
it wont allow me to< says phone is in locked state
123123123...123 said:
this command is not working for me it is giving error of unknown command
Click to expand...
Click to collapse
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
123123123...123 said:
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
Click to expand...
Click to collapse
managed to get into EDL mode by shorting the pinouts, but still cant flash stock ROM cuz apparently xiaomi has to authorize it (ie i dont have permission to unbrick it). This is the first and last xiaomi phone I'll ever buy - never had a phone where there was no option i had to unbrick it. going to ****in smash it to peices!
I felt sorry that no one did help these people,
go to fastboot and run windows commands in twrp folder and type as following :
- option one:
fastboot devices
./fastboot set_active b
./fastboot erase boot
./fastboot set_active a
./fastboot erase boot
fastboot flashing unlock (optional)
fastboot Flash boot [put twrp name].img or go to mi flash to install stock rom. or unzip the stock rom from bat file run it
or try the second option:
https://ibb.co/w6bcG5g
islam=salam=peace=paix

HELP! Official June 2020 ota update failed. Stuck bootloop. Stock phone

Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
I then tried to restart my phone and ended up in bootloop.
Fastboot, stock recovery accessible.
Tried draining the battery and then charging it and booting but no luck.
Tried 'fastboot erase cache' from minimal adb but failed.
i DO NOT want to lose my data, Is there a way to get a backup of the internal storage pls help ASAP.
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
Fastboot ROM can't be flashed without unlocking the bootloader. He has locked BL.
OP you can't do anything now sadly. All data will be wiped, and only way to reset phone is factory reset. Approach nearest service centre maybe they can help in some way.
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
LostLust said:
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
Click to expand...
Click to collapse
Flash the latest global stable fastboot ROM via Mi Flash Tool.
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
Tried flashing stock rom via fastboot but failed with error
error:Erasing 'boot' FAILED (remote: 'erase is not allowed in lock state')
Is there any other way? Can i unlock bootloader while being stuck in bootloop?
same problem with me stuck at 90.49 while updating . you found any solution?
nikkxx11 said:
same problem with me stuck at 90.49 while updating . you found any solution?
Click to expand...
Click to collapse
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
me.icon18 said:
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
Click to expand...
Click to collapse
how much time did they take to reset ? and did they charge you anything?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
nikkxx11 said:
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
Click to expand...
Click to collapse
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
i'm trying this method. and my bootloader has unlocked before
First, OP stated that
Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
Click to expand...
Click to collapse
Soft bricked device can be recovered by simply fastboot.
But with locked bootloader, it is hard to recover your device because now it is hard bricked. You can do EDL Flashing but you need authorized mi account and certain tools to do that.
Your last resort for now is to bring your device to a Xiaomi certified service center, they have the right tools for the job.

Help me with Realme 7 bootloop no fastboot or recovery available

I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.

Redmi 10c bootloop issue

so yesterday as I was flashing a custom rom for my device I found out that the hotspot wasn't working, I've look for solution across the internet and have found out that flashing persist.img on persist partition via twrp shall do the work, I did the same as instructed in the post downloaded the same file which I didn't confirm if it was really for my device, so after that my phone is stuck on an endless bootloop if I try to reboot to system luckily both fastboot and recovery was still accessible so I tried flashing another rom, stock, and even run flashrom.bat via fastboot but that didn't seem to fix it, now I'm only left with flashing stock img via miflash tool and hope it work for me, I can't really afford to pay anyone to fix it not at the moment and I want to atleast try to troubleshoot it somehow, what other options am I left with? hope I can get some answers
jannny24 said:
so yesterday as I was flashing a custom rom for my device I found out that the hotspot wasn't working, I've look for solution across the internet and have found out that flashing persist.img on persist partition via twrp shall do the work, I did the same as instructed in the post downloaded the same file which I didn't confirm if it was really for my device, so after that my phone is stuck on an endless bootloop if I try to reboot to system luckily both fastboot and recovery was still accessible so I tried flashing another rom, stock, and even run flashrom.bat via fastboot but that didn't seem to fix it, now I'm only left with flashing stock img via miflash tool and hope it work for me, I can't really afford to pay anyone to fix it not at the moment and I want to atleast try to troubleshoot it somehow, what other options am I left with? hope I can get some answers
Click to expand...
Click to collapse
If your bootloader is unlocked and you can access fastboot mode then you can flash it using miflash without auth
mvikrant97 said:
If your bootloader is unlocked and you can access fastboot mode then you can flash it using miflash without auth
Click to expand...
Click to collapse
mvikrant97 said:
If your bootloader is unlocked and you can access fastboot mode then you can flash it using miflash without auth
Click to expand...
Click to collapse
thanks, it was nervewracking as miflash failed to boot my phone twice, it turns out I just have to flash persist.img from the fastboot rom separately on orangefox and that did the work

Categories

Resources