Need help.. cant turn on my Phone.. always stuck at android one Logo and fastboot (when i try hold volume up and power )
i rooted phone (adb,twrp,magisk) . Everything well good, but WIFI didn't work. Then i get in TWRP and maybe deleted partition A and B( ) i can't get through the Fastboot.
my mi a3 is V10.3.6.0.PFQMIXM version-- and cant Flash it with miflash tool, it says error : can not found file flash_all_lock.bat
now i cant find my device with Adb devices (its says List of devices attached)
pls help :/ thank you.
Go to nearest service centre
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying to flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
evanB70 said:
Going to a service center probably isn't a wise idea. You've rooted your phone - your warranty is gone.
I guess you don't have the right drivers installed OR, the stock rom you were trying flash had some issues with the flash script. You might want to take a look at this post
Download the correct stock ROM for your device, the .tgz version & flash it with miflash tool. It's important to note that some versions of miflash tool don't work with Mi A series phones for unknown reasons.
Alternatively, if your recovery is working, then you can flash the recovery version of stock rom. It's all available on this forum.
Click to expand...
Click to collapse
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
ticmali said:
thx m8
I flashed with Miflash( and writed flash_all_lock.bat), used version V10.3.4.0. and it worked.. wifi working. (my build number say it is V10.3.6) ?
Click to expand...
Click to collapse
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
evanB70 said:
Glad to hear you're phone is working fine now :highfive: :highfive:
I think you somehow had your wifi / mobile data on & the phone downloaded the OTA & auto updated itself to the latest firmware, that is V10.3.6.0.
Click to expand...
Click to collapse
yes, I had mobile data on. thanks
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Underraino said:
hello,
i was trying to install havoc on mi fresh new mi a3 i got stocked in fastboot. tried everthing but it give a status as "pause" in miflash or bat command.. what to do?
error message in bat command for V10.3.4.0.PFQMIXM_20190815 as in https://drive.google.com/open?id=1oLmwpDsd8ICUPsty46osBReJdcckqvPE please hekp
Click to expand...
Click to collapse
Try my Procedere,i try it Yesterday and works:
-set SLOT B and install twrp
-then boot to TWRP recovery and Flash TWRP.zip again
-reboot to twrp recovery (Check If you on SLOT B ...)
-wipe Cache,system,Data
-flash Rom HAVOC
-flash TWRP
-reboot in TWRP again,then...
Set SLOT A!
-flash Gapps
-flash FDE
-Format Data
-Reboot to to System and wait when HAVOC done
Reboot to TWRP then Flash and root Magisk 20.2 in SLOT A, Reboot...
Done!
tried flashing my mi a3 to stock now stuck in fastboot mode
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
mewcatchew said:
I finally got miflash to recognize my phone by adding a new folder and naming it "log" and i tried flashing "laurel_sprout_global_images_V10.3.8.0.PFQMIXM_20191012.0000.00_9.0_d099f2839b" ; it said it was flashing and had green progress bar, but it went all the way to 100% after about 600 seconds and i just gave up after 1200 seconds. what am I missing?
Click to expand...
Click to collapse
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Negative. still stuck in fastboot mode
mewcatchew said:
Negative. still stuck in fastboot mode
Click to expand...
Click to collapse
Change the active slot to 'a' and reboot.
garylawwd said:
Just reboot your device when it finishes after 600 seconds. Miflash doesn't tell you that it successfully flashed it it just goes on forever. So just reboot and it will work.
Click to expand...
Click to collapse
msatyanarayana said:
Change the active slot to 'a' and reboot.
Click to expand...
Click to collapse
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
mewcatchew said:
it's unable as its in a locked state: 'FAILED (remote: 'Slot Change is not allowed in Lock State
I believe I need to get it into EDL mode. I have no problem taking off the back glass and shorting the pins to do so, but not sure what to do after that point... Set slot to active "a", flash it with miflash with a fastboot stock ROM? Also from what ive read, you can only put thw phone into edl mode once so it's a one shot deal.
Click to expand...
Click to collapse
Try to unlock bootloader once again through fastboot and after that you can change the slot.
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
this command is not working for me it is giving error of unknown command
msatyanarayana said:
Try to unlock bootloader once again through fastboot and after that you can change the slot.
Click to expand...
Click to collapse
it wont allow me to< says phone is in locked state
123123123...123 said:
this command is not working for me it is giving error of unknown command
Click to expand...
Click to collapse
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
MarcusMario0605 said:
Set active slot to a first before flashing in MiFlash using command - "fastboot set_active a" (without quotations) in adb command.
Click to expand...
Click to collapse
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
123123123...123 said:
C:\adb\fastboot.exe: unknown option -- set-active=a
how to solve this?
:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:05 AM ----------
on entering this command i am getting a whole lot of command suggestion as this command not working for me. can you tell me what i am doing wrong and what should i do to make it correct.
Click to expand...
Click to collapse
managed to get into EDL mode by shorting the pinouts, but still cant flash stock ROM cuz apparently xiaomi has to authorize it (ie i dont have permission to unbrick it). This is the first and last xiaomi phone I'll ever buy - never had a phone where there was no option i had to unbrick it. going to ****in smash it to peices!
I felt sorry that no one did help these people,
go to fastboot and run windows commands in twrp folder and type as following :
- option one:
fastboot devices
./fastboot set_active b
./fastboot erase boot
./fastboot set_active a
./fastboot erase boot
fastboot flashing unlock (optional)
fastboot Flash boot [put twrp name].img or go to mi flash to install stock rom. or unzip the stock rom from bat file run it
or try the second option:
https://ibb.co/w6bcG5g
islam=salam=peace=paix
Related
I had previously rooted and used several roms but recently i went back to developer rom and now when i try to flash twrp via command prompt it shows WRITE TO DEVICE FAILED (INVALID ARGUMENT)! I put all the files properly retried it 100s of times but it just doesn't flash. I flashed twrp last time by this very process!
Using isb 3.0 and 2.0 didnot solve the problem
Please provide a solution!
maybe the bootloader got locked check otherwise erase and flash the whole rom using fastboot mi flash tool
atrirocks said:
I had previously rooted and used several roms but recently i went back to developer rom and now when i try to flash twrp via command prompt it shows WRITE TO DEVICE FAILED (INVALID ARGUMENT)! I put all the files properly retried it 100s of times but it just doesn't flash. I flashed twrp last time by this very process!
Using isb 3.0 and 2.0 didnot solve the problem
Please provide a solution!
Click to expand...
Click to collapse
Try booting in recovery again via Fastboot.
- Install Minimal ADB & Fastboot setup (search on Google or XDA)
- Go in Fastboot mode of phone and connect it to PC
- Open command prompt and go to the folder location where minimal ADB is installed
- Type:
fastboot devices
- You should see your device listed with some Alpha-numeric code
- Copy TWRP by Vashishth or official TWRP .img file in the Minimal ADB installation folder
- type:
fastboot boot your-recovery-file-name.img
If your bootloader is not locked, you should be able to see phone rebooted in TWRP else you might need to unlock bootloader again.
Also if in TWRP Install commands are not working, try "Format Data" it is different from Wiping Data partition, Format Data will clear all of your internal storage including photos and videos and files.
After that you can download ROM or your PC and try installing it by sideloading it via adb command.
Good luck!
asifzbaig said:
Try booting in recovery again via Fastboot.
- Install Minimal ADB & Fastboot setup (search on Google or XDA)
- Go in Fastboot mode of phone and connect it to PC
- Open command prompt and go to the folder location where minimal ADB is installed
- Type:
fastboot devices
- You should see your device listed with some Alpha-numeric code
- Copy TWRP by Vashishth or official TWRP .img file in the Minimal ADB installation folder
- type:
fastboot boot your-recovery-file-name.img
If your bootloader is not locked, you should be able to see phone rebooted in TWRP else you might need to unlock bootloader again.
Also if in TWRP Install commands are not working, try "Format Data" it is different from Wiping Data partition, Format Data will clear all of your internal storage including photos and videos and files.
After that you can download ROM or your PC and try installing it by sideloading it via adb command.
Good luck!
Click to expand...
Click to collapse
Bootloader is unlocked, fastboot tried a thousand times where fastboot devices shows the device but fastboot flash recovery shows the error! I even tried changing the twrp, renaming it but to no result.....
atrirocks said:
Bootloader is unlocked, fastboot tried a thousand times where fastboot devices shows the device but fastboot flash recovery shows the error! I even tried changing the twrp, renaming it but to no result.....
Click to expand...
Click to collapse
Than it seems like yoir bootloader is locked.
Try using Xiaomi's Unlock Tool again, beware, it will wipe all of yoir internal storage as well.
atrirocks said:
I had previously rooted and used several roms but recently i went back to developer rom and now when i try to flash twrp via command prompt it shows WRITE TO DEVICE FAILED (INVALID ARGUMENT)! I put all the files properly retried it 100s of times but it just doesn't flash. I flashed twrp last time by this very process!
Using isb 3.0 and 2.0 didnot solve the problem
Please provide a solution!
Click to expand...
Click to collapse
Try edl mode to flash the full file and beware of anti rollback
karthik03 said:
Try edl mode to flash the full file and beware of anti rollback
Click to expand...
Click to collapse
How do I boot into EDL mode & how to check anti-roll back is on?, anyway to disable it?. I updated my phone to 10.2.3 couple of days back from then on, the network speed is horrible. Although I unlocked my bootloader as soon as I got my phone(I am an early adopter), I never flashed TWRP. Now when I try to flash TWRP to move to a custom ROM, I'm always getting same error as OP. All the drivers are installed, I can see my device in fastboot devices but it just refuses to flash TWRP. I can see bootloader status is unlocked!!.
atrirocks said:
Bootloader is unlocked, fastboot tried a thousand times where fastboot devices shows the device but fastboot flash recovery shows the error! I even tried changing the twrp, renaming it but to no result.....
Click to expand...
Click to collapse
Doesn't try the fastboot flash recovery recovery.img, try fastboot boot recovery.img ,that can help
mjskraju said:
How do I boot into EDL mode & how to check anti-roll back is on?, anyway to disable it?. I updated my phone to 10.2.3 couple of days back from then on, the network speed is horrible. Although I unlocked my bootloader as soon as I got my phone(I am an early adopter), I never flashed TWRP. Now when I try to flash TWRP to move to a custom ROM, I'm always getting same error as OP. All the drivers are installed, I can see my device in fastboot devices but it just refuses to flash TWRP. I can see bootloader status is unlocked!!.
Click to expand...
Click to collapse
Use fastboot to edl it is present on xda or try shorting of pins
atrirocks said:
I had previously rooted and used several roms but recently i went back to developer rom and now when i try to flash twrp via command prompt it shows WRITE TO DEVICE FAILED (INVALID ARGUMENT)! I put all the files properly retried it 100s of times but it just doesn't flash. I flashed twrp last time by this very process!
Using isb 3.0 and 2.0 didnot solve the problem
Please provide a solution!
Click to expand...
Click to collapse
Have you tried different PC? Mine works on Intel and have same error code on AMD.
atrirocks said:
Bootloader is unlocked, fastboot tried a thousand times where fastboot devices shows the device but fastboot flash recovery shows the error! I even tried changing the twrp, renaming it but to no result.....
Click to expand...
Click to collapse
AMD Ryzen has an issue with Poco F1. Try Intel PC.
Also is your TWRP in the same folder as your adb tools/are you typing the correct path?
tnsmani said:
AMD Ryzen has an issue with Poco F1. Try Intel PC.
Also is your TWRP in the same folder as your adb tools/are you typing the correct path?
Click to expand...
Click to collapse
Seems like ryzen is the problem brother! I used another pc as i had no other options left
Hi I have a redmi note 3 pro which I flashed with xiaomi flasher. Everything worked and the phone boots up but it lost wifi and sensors. I have read about this problem but I can't seem to find a solution. Can someone please help me?
eltarod said:
Hi I have a redmi note 3 pro which I flashed with xiaomi flasher. Everything worked and the phone boots up but it lost wifi and sensors. I have read about this problem but I can't seem to find a solution. Can someone please help me?
Click to expand...
Click to collapse
Download fastboot rom
Extract it to folder
Find persist.img file
Copy it to some other place.
Now u need unlocked bootloader to flash persist.img file
If u already have unlocked boot loader then Put phone in fastboot mode
Open cmd
Use below fastboot commands to flash persist file
fastboot devices
fastboot flash persist persist.img
fastboot reboot
Black_Stark said:
Download fastboot rom
Extract it to folder
Find persist.img file
Copy it to some other place.
Now u need unlocked bootloader to flash persist.img file
If u already have unlocked boot loader then Put phone in fastboot mode
Open cmd
Use below fastboot commands to flash persist file
fastboot devices
fastboot flash persist persist.img
fastboot reboot
Click to expand...
Click to collapse
Is there any other way with locked bootloader and edl mode to flash persist.img?
eltarod said:
Is there any other way with locked bootloader and edl mode to flash persist.img?
Click to expand...
Click to collapse
Why ? u cant unlock bootloader officialy?
---------- Post added at 04:52 PM ---------- Previous post was at 04:45 PM ----------
If not fastboot mode then u can flash img file using orange fox twrp
Install fox twrp
Boot in fox recovery.
Select .img file
Select persist partition
And flash it
And reboot
https://orangefox.tech/download/kenzo/
I guess I can even without wifi.. I could use sim data to input a mi account.. But it would take some days. I was hoping for a quicker solution. If not then I will do as you say.
eltarod said:
I guess I can even without wifi.. I could use sim data to input a mi account.. But it would take some days. I was hoping for a quicker solution. If not then I will do as you say.
Click to expand...
Click to collapse
No permission need to apply.
Just Turn on sim data
. And Try to add account in developer option. See if can be successfully added in developer option > miunlock status.
Let me know if u getting 20091 error in developer option.
First I flashed persist with fastboot commands. Everything was successful but still the same problem. Then I installed OrangeFox TWRP with fastboot commands. Booted straight up to recovery and flashed the image as you said to persist partition. Selected to reboot to system and stays stucked at MI logo with no loading. Any ideas?
eltarod said:
First I flashed persist with fastboot commands. Everything was successful but still the same problem. Then I installed OrangeFox TWRP with fastboot commands. Booted straight up to recovery and flashed the image as you said to persist partition. Selected to reboot to system and stays stucked at MI logo with no loading. Any ideas?
Click to expand...
Click to collapse
Ur imei and baseband is showing ?
Black_Stark said:
Ur imei and baseband is showing ?
Click to expand...
Click to collapse
Don't know now since the phone is dead. I will have to flash a firmware. Will tell after I wake up phone with firmware.
Here is something new.. I transfered a .zip firmware to phone and tried to flash with ORangeFOx but nothing happens. I get an error. Checked and the phone can't see the Data partition. Should I flash firmware with edl mode?
eltarod said:
Here is something new.. I transfered a .zip firmware to phone and tried to flash with ORangeFOx but nothing happens. I get an error. Checked and the phone can't see the Data partition. Should I flash firmware with edl mode?
Click to expand...
Click to collapse
Ur phone kenzo or kate ??
Flash right fastboot rom on right device.
Install telegram app chat on redmi note 3 community group. It will be faster to know and fix ur issue.
U can install app on pc or phone.
https://t.me/rn3dev
Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
I then tried to restart my phone and ended up in bootloop.
Fastboot, stock recovery accessible.
Tried draining the battery and then charging it and booting but no luck.
Tried 'fastboot erase cache' from minimal adb but failed.
i DO NOT want to lose my data, Is there a way to get a backup of the internal storage pls help ASAP.
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
Fastboot ROM can't be flashed without unlocking the bootloader. He has locked BL.
OP you can't do anything now sadly. All data will be wiped, and only way to reset phone is factory reset. Approach nearest service centre maybe they can help in some way.
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
LostLust said:
I face same problem with OP. but I have unlocked bootloader. sadly I've doing wipe data from stock recovery but no luck.
not detected by mi pc suite. should I use miflash and download the full rom?
Click to expand...
Click to collapse
Flash the latest global stable fastboot ROM via Mi Flash Tool.
YasuHamed said:
try flashing fastboot rom with miflash and at the bottom there is option SAVE USER DATA,
fastboot rom will be 3 gb to download, extract and then again extract until u see files,
take this folder, put it in C drive and give a smaller name.
now open mi flash, put device is Fastboot mode, and flash it with SAVE USER DATA option / don't LOCK the device (if your boot is unlocked)
remember, i personaly never tested this method, just read over the internet, perhaps you should see youtube videos also on this
Click to expand...
Click to collapse
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
Tried flashing stock rom via fastboot but failed with error
error:Erasing 'boot' FAILED (remote: 'erase is not allowed in lock state')
Is there any other way? Can i unlock bootloader while being stuck in bootloop?
same problem with me stuck at 90.49 while updating . you found any solution?
nikkxx11 said:
same problem with me stuck at 90.49 while updating . you found any solution?
Click to expand...
Click to collapse
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
me.icon18 said:
No ultimately i had to get it reset at the service center losing all my data.
I'm looking for a data recovery software to get back whatever might be left on my internal.
Click to expand...
Click to collapse
how much time did they take to reset ? and did they charge you anything?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
LostLust said:
yes, I did flash via fastboot. it shows fail at MiFlash but my poco can boot up normal, weird.
unfortunately all my data wiped (didn't notice the option in right bottom)
Click to expand...
Click to collapse
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
noob.gamer said:
Flash the latest global stable fastboot ROM via Mi Flash Tool.
Click to expand...
Click to collapse
nikkxx11 said:
---------- Post added at 04:43 AM ---------- Previous post was at 04:33 AM ----------
[/COLOR]
Was your Bootloader locked or unlocked??
It's stuck at poco boot logo .When I tried to flash it says" Erase boot error" .I tried everything wipe data .Mi assistance nothing worked ,my recovery options and fastboot is working. Service center are giving long dates .i need to get it repaired before 7th,Can someone help me?
Click to expand...
Click to collapse
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
i'm trying this method. and my bootloader has unlocked before
First, OP stated that
Poco f1 no root, locked bootloader, stock phone received the official ota for june 2020 security patch and got stuck on 90.49% of installation for hours.
Click to expand...
Click to collapse
Soft bricked device can be recovered by simply fastboot.
But with locked bootloader, it is hard to recover your device because now it is hard bricked. You can do EDL Flashing but you need authorized mi account and certain tools to do that.
Your last resort for now is to bring your device to a Xiaomi certified service center, they have the right tools for the job.
Sir, i have updated my mi note 10 lite to android 11and after restart it works fine. But the problem is that when i reboot to recovery to install root, because i have installed twrp before. Unfortunately, its stuck on fastboot screen.
Can you help me out to solve this problem.
I tried to flash twrp but its not mounting partition, i reboot to recovery again but its go to fastboot mode again
I tried to flash fastboot rom through mi flash tool it errors because anti rollback.(android 10)
Still i am finding Android 11 fastboot images but not found.
You can contact dennis via Instagram that man reply you
Mi note 10 lite User ðŸ˜ðŸ˜ said:
You can contact dennis via Instagram that man reply you
Click to expand...
Click to collapse
Okay i dm you now check please
haadii said:
Sir, i have updated my mi note 10 lite to android 11and after restart it works fine. But the problem is that when i reboot to recovery to install root, because i have installed twrp before. Unfortunately, its stuck on fastboot screen.
Can you help me out to solve this problem.
I tried to flash twrp but its not mounting partition, i reboot to recovery again but its go to fastboot mode again
I tried to flash fastboot rom through mi flash tool it errors because anti rollback.(android 10)
Still i am finding Android 11 fastboot images but not found.
Click to expand...
Click to collapse
extract the official recovery from the global fastboot rom and flash through cmd to recover the boot, then wipe from the recovery and you will return to miui 12.1.1
what i'm trying to figure out is if i can go back to the previous version of android without risking to crash the device.
I ran the fastboot getvar anti command and the result was Anti: 2 but I am not quite clear what that means.
I am a new user at Xiaomi.
leinadagisiaol said:
what i'm trying to figure out is if i can go back to the previous version of android without risking to crash the device.
I ran the fastboot getvar anti command and the result was Anti: 2 but I am not quite clear what that means.
I am a new user at Xiaomi.
Click to expand...
Click to collapse
I tried it. When flashing fastboot images thorough miflash its error in anti roll back check... Or may your device hard brick
Now i am here with a new fu*kin error..
Any solution for this. I don't want to lose data
If stuck in fastboot mode, type "fastboot continue" in adb and it will proceed with boot
ApexPrime said:
If stuck in fastboot mode, type "fastboot continue" in adb and it will proceed with boot
Click to expand...
Click to collapse
No. Its not my problem now
My problem is mentioned above
Bro i think you can access your files from computer in recovery so make a backup and flash official firmware using miflash tool. I don't think there's any other way.
haadii said:
Now i am here with a new fu*kin error..
Any solution for this. I don't want to lose data
Click to expand...
Click to collapse
Before installing custom recovery and installing custom rom, it is recommended to backup.
You installed the recovery well, but in order to install custom ROMs you have to format and restart the recovery, then pass the ROM you want to flash and reboot system.
haadii said:
I tried it. When flashing fastboot images thorough miflash its error in anti roll back check... Or may your device hard brick
Click to expand...
Click to collapse
I managed to go back to miui 11 version 11.0.8
leinadagisiaol said:
I managed to go back to miui 11 version 11.0.8
Click to expand...
Click to collapse
How?? Can you show or tell me the process!! I don't like Android 11
haadii said:
How?? Can you show or tell me the process!! I don't like Android 11
Click to expand...
Click to collapse
Good evening ..
For all those interested in downloading the official ROM version of the Xiaomi mi note 10 Lite, I have news for you, at least for those who want and have not tried.
I tried the method of saving the MiFlash folder on Disk C, in the same way I did with the global ROM of miui 11.0.8 fastboot, to the latter I changed the name of the folder to a shorter one (example Miui11.0.8), then boot in fastboot mode and run my flash running the ROM (Miui11.0.8) and the result obtained is that, I'm back on Android 10 with miui 11.0.8.
I share this information to give security to all those who had doubts about this and did not dare to try.
This data I extracted from various forums and pointed to it to give credit to all those who previously published it.
Remember that the bootloader must be unlocked.
Regards.
Hi everybody
I've got a problem...
Downloaded latest OTA update from "xiaomi.eu", agreed to install, the phone then rebooted in to fastboot mode and does nothing else.
Rebooted the phone with adb command "fastboot continue" and this went well...it rebooted the system.
Now every time i restart the phone it reboots in to fastboot mode and i have to "fastboot continue" again.
I am also not able to enter recovery because the phone always enters fastboot mode.
Reinstalled recovery (Twrp-3.4.2B_toco_by.alex.msk1407.img) via ADB succesfully, but when i "fastboot reboot recovery" it reboots back into fastboot.
I'm also not able to boot into EDL mode.
Any solution?
Thanks
"MI NOTE LITE 8GB/128GB" running "MIUI by xiaomi.eu 12.1.1 | Stable 12.1.1.0(RFNMIXM)
salsaecoentros said:
Hi everybody
I've got a problem...
Downloaded latest OTA update from "xiaomi.eu", agreed to install, the phone then rebooted in to fastboot mode and does nothing else.
Rebooted the phone with adb command "fastboot continue" and this went well...it rebooted the system.
Now every time i restart the phone it reboots in to fastboot mode and i have to "fastboot continue" again.
I am also not able to enter recovery because the phone always enters fastboot mode.
Reinstalled recovery (Twrp-3.4.2B_toco_by.alex.msk1407.img) via ADB succesfully, but when i "fastboot reboot recovery" it reboots back into fastboot.
I'm also not able to boot into EDL mode.
Any solution?
Thanks
"MI NOTE LITE 8GB/128GB" running "MIUI by xiaomi.eu 12.1.1 | Stable 12.1.1.0(RFNMIXM)
Click to expand...
Click to collapse
Just format userdata. In fastboot mode command. Fastboot format userdata
Then flash new stock fastboot images of eu in miflash.
Note,
Backup your data first
Good Day. I have concern but after updating to Android 12. Currently my Mi Note 10 Lite is experiencing stuck in fastboot and mi logo. I already tried flashing using MIFlash 2020 but the error occur is "Erase is not allowed in Lock State".I also used MI PC Suite but it cant read my device (maybe because of lock state also). Even in MI-Unlock (batch_unlock application) it says its locked but when I sign-in it doesnt give permission to unlock (I used yahoo account).
goroshigeno56 said:
Good Day. I have concern but after updating to Android 12. Currently my Mi Note 10 Lite is experiencing stuck in fastboot and mi logo. I already tried flashing using MIFlash 2020 but the error occur is "Erase is not allowed in Lock State".I also used MI PC Suite but it cant read my device (maybe because of lock state also). Even in MI-Unlock (batch_unlock application) it says its locked but when I sign-in it doesnt give permission to unlock (I used yahoo account).
Click to expand...
Click to collapse
did you fix that problem?
I can't install any rom, ADB sideload fails with this error:
Unable to mount storage.
Devices on super may not mount until rebooting recovery.
To flash additional zips, please reboot recovery to switch to the updated slot.
I already tried to switch the slots many times.
I also tried to format data, but it tells me:
E: unable to check merge status
Updating partition details...
...done
Unable to mount storage
I can access the recovery and the factory-reset android, but i can't do anything more.
I think the problem is relative to encryption but I can't even format data, so I don't know how to escape this...
Now I can't even access the rom, I can only access TWRP and fastboot. The problem is that format data does not work, with the same error:
E: unable to check merge status
I tried repairing and changing filesystem, now I don't really know what to do...
just install rom using fast boot tool and
format data after that
muneeb rizwan said:
just install rom using fast boot tool and
format data after that
Click to expand...
Click to collapse
I have never used fastboot tool. I'm on linux. Is this the program i must install?
And also, do I need a fastboot rom?
[Tool] Flash Custom ROMs through Fastboot [mojito / sunny]
Are you struggling to install custom roms on this device? Lots of recovery errors? Can't boot to any rom? Don't worry. Fastboot is a good way to avoid such nonsense... Install any custom rom & miui recovery rom through fastboot Steps: 1...
forum.xda-developers.com
USE THIS TOOL AND YOU DONT NEED FASTBOOT ROM
Ok, i installed CrDroid with fastboot tool, then format data and then re-flashed the rom with adb, but the phone starts just on the CrDroid recovery (slot b) or on fastboot (slot a)...
What is the correct process to install a ROM? This A/B thing gets me mad
Now I managed to install an old MIUI fastboot rom from this link with XiaomiADBFastbootTools (a kind of mi flash tool for linux) and this rom now it is working, so I think I had some problems with the fastboot tool you suggested. But I don't really know what was the problem, the installation process seemed to work, It restarted to recovery, I rebooted to system but then it kept returning to recovery or to fastboot without entering in the system...
Switching slots directly in recovery is not functional. Just look after switching what the active slot is and you will see that it has not changed. Do the slot switching with the fastboot command from the PC.
fastboot --set-active=a
fastboot --set-active=b
StaryMuz said:
Switching slots directly in recovery is not functional. Just look after switching what the active slot is and you will see that it has not changed. Do the slot switching with the fastboot command from the PC.
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
yes, I was using these commands to switch slots. but when it is necessary to switch slots in the flashing process? I mean, what is the correct order? format - flash rom with adb - reboot to fastboot - switch slot - reboot to system...is this correct?
Slot swapping may not be required. Do it only when it is requested or when the boot crashes into recovery.
StaryMuz said:
Slot swapping may not be required. Do it only when it is requested or when the boot crashes into recovery.
Click to expand...
Click to collapse
OK, so is this the correct order?
Format - flash rom with adb - reboot to system
Now I have a problem with fastboot...I don't know why but it can't boot any recovery...
"fastboot boot recovery.img" remains stuck at:
Sending 'boot.img' (131072 KB)
Click to expand...
Click to collapse
and nothing happens! I tried with TWRP and OrangeFox.
I also tried to change slot but it fails:
fastboot --set-active=a
Setting current slot to 'a' FAILED (remote: 'unknown command')
fastboot: error: Command failed
Click to expand...
Click to collapse
The command 'Fastboot reboot' gives me a black screen with a white message: 'any key to shutdown', then the phone reboots to system...
What is the full designation of your phone?
StaryMuz said:
What is the full designation of your phone?
Click to expand...
Click to collapse
what is the designation?
Xiaomi Redmi Note .....
All of it, exactly.
StaryMuz said:
Xiaomi Redmi Note .....
All of it, exactly.
Click to expand...
Click to collapse
Redmi Note 10 64GB/4GB, I think the codename is sunny because I have the global/european version. Do you need more?
I think the best step is to upload the original Miui using MiFlash with the "clear all" setting.
Use this version of MiFlash.
You can get the right Miui here.
Before using MiFlash, I recommend loading the boot.img included in the downloaded Miui into your phone in fastboot mode.
Use the command:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Then use MiFlash and don't play Miui. Wait until the phone starts itself, then you can disconnect it.
If anything is not clear, ask questions.
StaryMuz said:
I think the best step is to upload the original Miui using MiFlash with the "clear all" setting.
Use this version of MiFlash.
You can get the right Miui here.
Before using MiFlash, I recommend loading the boot.img included in the downloaded Miui into your phone in fastboot mode.
Use the command:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Then use MiFlash and don't play Miui. Wait until the phone starts itself, then you can disconnect it.
If anything is not clear, ask questions.
Click to expand...
Click to collapse
Actually I'm already in a original MIUI and it is working. My pc is on linux so I can't use MiFlash but I used XiaomiADBFastbootTools (a kind of MiFlash tool for linux). Can I start from here or I have to install the MIUI version you linked?
The only thing is that I didn't specifically load the boot.img
Unfortunately I don't know the Linux version of MiFlash. They may not work equivalently. It needs to properly clean all the partitions of the phone and load all the files supplied in the ROM.
I recommend to use the Miui listed by me.