Tweaked Stock 8.1.0 Galaxy J727PVPU6BSF2 - Samsung Galaxy J7 ROMs, Kernels, Recoveries, & Oth
As the title states this is a tweaked 8.1.0 Rom for the Galaxy J727P for anyone still on this phone !
BUILD from the firmware files J727PVPU6BSF2 !
Instill data factory reset wipe system flash my build then flash Magisk 19.2 wipe cache an Dalvik cache an boot an enjoy !
My Rom
https://mega.nz/#!eFlBTQBS!TiXEhMZrqawnPpWcZgGf_awCJTlest_ZQ_MDMpmBEx8
Magisk 19.2
https://mega.nz/#!uV8wFCbA!2AI4HCgpTll-lzNuNZJsiCmapI3BVZABEV32yS1tI6Y
yes it's some what debloated work good as a restore file ! I made it using classykitchen free as my own restore file !
Have fun with it an anyone out there that can make us a Deodexed Rom feel free to use my work !
Thanks
Downloading now to try
How to edit apn settings boost mobile ? I was able to do it with other 8.1 rom .
apn not shore
Tigerevo said:
How to edit apn settings boost mobile ? I was able to do it with other 8.1 rom .
Click to expand...
Click to collapse
my rom should have when to boost on flashing the csc file should have taken care of that ! If you are coming back from a lineage build you must flash stock firmware before flash ing my Rom !
Oh yes internet is working . I just wanted to add 'dun 'to my lte apn. The apn settings on this are grated out. I haven't found way to edit . The only thing not working is when I do a restore from Samsung acct it doesn't authenticate it after I'm logged in. I also used xposed before on stock rom for Xinternalsd module . It said this was arm not arm64 , yet an app 'device information' said this was arm64.
Thank you so much for the rom.. after much ado with installing and tweaking and signing into everything, and a couple of my own goofs - heh..
I actually bothered to completely wipe the partitions in TWRP, flashed the Oreo 8.1 ROM that matches this one, and then flashed this one after, then installed Magisk as recommended.
I have a Samsung Galaxy SM-J727P
It's up and running.. I can't seem to update past Magisk 19.2 though.. the Magisk Manager updates just fine, but updating the core causes the following.>>>
Updating partition details
Failed to mount '/data' (Invalid argument) (Red Text)
...done
Unable to mount storage (Red Text)
Failed to mopunt 'data' (Invalid argument) (Red Text)
Fill SELinux support is present
E: (Red Text)
Unable to mount /data/media/TWRP/.twrps (Red Text)
MTP Enabled
Installing zip file 'external_sd/Magisk-20.1.zip'
Checking for Digest file...
************************
* Magisk v20.1 Installer
************************
- Mounting System
- Encrypting data, keep forceencrypt
- Target image :/dev/block/mmcblk0p24
- Device platform: arm
- Constructing environment
- Unpacking boot image
- Checking ramdisk status
- Magisk patch boot image detected
- Patchikng ramdisk
- Repacking boot image
- Flashing new boot image
- Unmounting Partitions
- Done
Updating partition details...
Failed to mount 'data' (Invalid argument) (Red Text)
...done
I am also using the latest TWRP twrp-3.3.1-1-j7popltespr.img.tar and flashing through Odin of course..
Suggestions>?
Magisk 19.2
Aurih said:
Thank you so much for the rom.. after much ado with installing and tweaking and signing into everything, and a couple of my own goofs - heh..
I actually bothered to completely wipe the partitions in TWRP, flashed the Oreo 8.1 ROM that matches this one, and then flashed this one after, then installed Magisk as recommended.
I have a Samsung Galaxy SM-J727P
It's up and running.. I can't seem to update past Magisk 19.2 though.. the Magisk Manager updates just fine, but updating the core causes the following.>>>
Updating partition details
Failed to mount '/data' (Invalid argument) (Red Text)
...done
Unable to mount storage (Red Text)
Failed to mopunt 'data' (Invalid argument) (Red Text)
Fill SELinux support is present
E: (Red Text)
Unable to mount /data/media/TWRP/.twrps (Red Text)
MTP Enabled
Installing zip file 'external_sd/Magisk-20.1.zip'
Checking for Digest file...
************************
* Magisk v20.1 Installer
************************
- Mounting System
- Encrypting data, keep forceencrypt
- Target image :/dev/block/mmcblk0p24
- Device platform: arm
- Constructing environment
- Unpacking boot image
- Checking ramdisk status
- Magisk patch boot image detected
- Patchikng ramdisk
- Repacking boot image
- Flashing new boot image
- Unmounting Partitions
- Done
Updating partition details...
Failed to mount 'data' (Invalid argument) (Red Text)
...done
I am also using the latest TWRP twrp-3.3.1-1-j7popltespr.img.tar and flashing through Odin of course..
Suggestions>?
Click to expand...
Click to collapse
Sorry to say Magisk 19.2 is as far as we can go with this phone ! Even rooting stock firmware any Magisk after 19.2 just soft bricks the phone you can flash straight back to 19.2 if you want try out the newer ones but as far thay don't work !
Welllll that's kind of bummer, but understandable.. Thank you for letting me know.. I do have one more question if I may..
I checked under the SafetyNet Check section and it says the following.>
SafetyNet Check Success
ctsProfile : false
basicIntegrity : true
I had to flash the phone a couple mroe times to finalize the thing and get it right, but that's just a learning curve thing.. The rom works great..
It looks like TWRP can't access /data again, so I have stuck modules in Magisk.. Nooooot wanting to backup and restore everything again... any suggestions to fix that, and the above problem of the ctsProfile?
Related
Android 5.0.1 for Neo....
Hi All, I found a CM12 Rom for Neo made by a developer called Komhir..... I think it has lot of bugs.... I tried it in my Neo V but it was only for Neo I suppose... Can anyone using Neo check and update what are working...... Below is the link to thread... Since the site was not in English I am posting the Google translate link... http://translate.google.com/transla...ial-lolipop-5-0-1-cm12-0-legacyxperia-488058/
... for Neo L ?? It is for Neo but you can install it on your Neo V. First you must flash my kernel cm11 and do all wipes with format system. Now from CWM install cm12 and gapps. After this power off the phone and flash right kernel from zip cm12. I only compiled ROM from source from Mike. I dont change anything. Camera, Calling, SMSing dont work. You need partition Ext4 on memory card, becouse all apps will be installed on they. I recomend min. 1 GB and class 10 card.
Hi Komhir Not Neo L..... I meant Neo..... I am using Neo V and have class 10 card with ext 4 partition done for 2 GB. But still I am unable to flash the ROM.. I shall try in the method you mentioned and will update.... Anyway thanks for your reply ....
Komhir said: ... for Neo L ?? It is for Neo but you can install it on your Neo V. First you must flash my kernel cm11 and do all wipes with format system. Now from CWM install cm12 and gapps. After this power off the phone and flash right kernel from zip cm12. I only compiled ROM from source from Mike. I dont change anything. Camera, Calling, SMSing dont work. You need partition Ext4 on memory card, becouse all apps will be installed on they. I recomend min. 1 GB and class 10 card. Click to expand... Click to collapse Hello, Thank you for making the CM12, i just want to ask what are the bugs with this?
Can you read?? "Camera Autofocus, Calling, SMSing dont work" itd Rom have a lot of bugs. I will not be exchanged to you all. Try you self and you will be know. Its not for daily use, but for satisfy the curiosity.
Komhir said: Can you read?? "Camera Autofocus, Calling, SMSing dont work" itd Rom have a lot of bugs. I will not be exchanged to you all. Try you self and you will be know. Its not for daily use, but for satisfy the curiosity. Click to expand... Click to collapse I did read about the non working, i was wondering about this: http://translate.googleusercontent....LkJrhjK2NhW2795tjMza3RXT4ApalmKjg#post4307267 since he uploaded it for haida and not for hallon, i was referring to that question about the haida.
Atomrat build is for haida and have added overclocking to 2GHz and swap. Kernel from Atomrat you can install on my ROM, becouse date of compilacion is the same
Komhir said: Atomrat build is for haida and have added overclocking to 2GHz and swap. Kernel from Atomrat you can install on my ROM, becouse date of compilacion is the same Click to expand... Click to collapse Ok, thank you, uhm.. what if i got EXT2 than EXT4 will it be ok? Or do i need EXT4 for that? and what's the difference between the two? Thank you..
I dont now. You can try on EXT2 and write here if it work or not.
Keep getting: "Encryption unsuccessful" "Encryption was interrupted and can't complete......" "To resume using your phone, you need to perform a factory reset...." Any ideias?
"factory reset"?? You must do all wipes with format system. EDIT: Probably you dont have partition EXT4 on SDcard
- Modified CM11 kernel: fastboot flash boot boot.img - OK - Wipe data/factory reset. Not All Ok: Message: 'E: format_volume:no MTD partition "userdata"' - Wipe cache partition: OK - Wipe dalvik cache: failed to find "userdata" partition to mount at "/data" - Format /system: OK - Install cm-12-20141219....zip: - Finding update package... -Opening update package.... -Installing update.... -mount: failed to mount /dev/block/mmcblk0p2 at /data: No such file or directory unmoun of /data failed; no such volume - Script succeeded: result was [/system] - Install from sdcard complete. - new CM12 kernel: fastboot flash boot boot.img - OK Just tried again. I thought i had worked :'( a message showed asking if I wanted to trust my computer and enable debug (exacly what I need). But it didn't. Then I got the same message as before! I suppose '/data' missing is important! How can i fix it?!
Flash3001 said: - Modified CM11 kernel: fastboot flash boot boot.img - OK - Wipe data/factory reset. Not All Ok: Message: 'E: format_volume:no MTD partition "userdata"' - Wipe cache partition: OK - Wipe dalvik cache: failed to find "userdata" partition to mount at "/data" - Format /system: OK - Install cm-12-20141219....zip: - Finding update package... -Opening update package.... -Installing update.... -mount: failed to mount /dev/block/mmcblk0p2 at /data: No such file or directory unmoun of /data failed; no such volume - Script succeeded: result was [/system] - Install from sdcard complete. - new CM12 kernel: fastboot flash boot boot.img - OK Just tried again. I thought i had worked :'( a message showed asking if I wanted to trust my computer and enable debug (exacly what I need). But it didn't. Then I got the same message as before! I suppose '/data' missing is important! How can i fix it?! Click to expand... Click to collapse What i did is, - Flash Modified Kernel of Komhir - Wipe Everything - Flash the Rom - Flash the Haida Kernel by atomrat - Then it's good to go, but please before installing any gapps, you must have EXT-4 because i tried with EXT-2 it doesn't work, no apps has been installed on my system except the one's in the rom. Thanks for Komhir and Atomrat Note: The list of the non-working is on their thread, check it, if you can live with your phone like that, then it's fine.
where is the thread ? where can i download Rom & Gapps Steps of installation My device is Xperia Neo Mt15i using cm-11-20141224-UNOFFICIAL-LegacyXperia-hallon thanks
Failed to mount '/cpefs' (Read-only file system)
Hi guys. I get this message in TWRP: Failed to mount '/cpefs' (Read-only file system) Does it mean something bad!? Thanks guys.
Largewoodenspoon said: Hi guys. I get this message in TWRP: Failed to mount '/cpefs' (Read-only file system) Does it mean something bad!? Thanks guys. Click to expand... Click to collapse Same me Sent from my SM-G965F using Tapatalk
what is your s9+ version?, it appear in twrp?
I have the same Problem with S9 plus G965F. It boots permanent in Samsung Logo repeated. even can not flash stock Firmware via Odin in download modus. Can anyone help me please?
Flash latest twrp 3.2.1-2. This mesage "Failed to mount '/cpefs' (Read-only file system)" is gone.
Doesn't cause any issue, but updating to 3.2.1-2 fixes it as well as slow restore from backup as seen by the changelog on XDA
i have updated mine to 3.2.3-1 but it doesnt fix the problem, i tried following a couple of guides in youtube like changing the file system from ext4 to ext2 but still no luck, it didnt even let me change the file system for Data i was on Android P when i tried that, but right now i just went back to full stock P without TWRP because i'm stuck with formatting Data (the most important part to clear out the restriction)
Any solution? i'm facing same.
Unable to flash anything on twrp. "Cannot mount/vendor".
I updated to the latest version of RR using dirty flash. After updating I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown. I also lost root (magisk) after the update. Here is the digest file Updating partition details... done Unable to mount storage Full SELinux support is present. Data successfully decrypted, new block device: '/dev /block/dm-0 Updating partition details... done MTP Enabled Installing zip file '/sdcard/DolbyAtmos_for_Oreo_ 20180219.zip Checking for Digest file... Skipping Digest check: no Digest file found ! Cannot mount /vendor Updater process ended with ERROR: 1 Error installing zip file '/sdcard/Dolby Atmos_for_Oreo_20180219.zip Updating partition details... done Please help. It's the same for any zip(I was able to flash SuperSU but my phone did not get rooted)
TWRP can't mount storage (Samsung SM-G355HN)
I've been trying to fix a bootlooping Samsung Galaxy Core 2 by installing a custom rom, but after installing Lineage twice (and failing) I tried to wipe the folders again to try to install a different rom. This was met with multiple errors "E : Unable to mount '/data'" and the likes. I've already tried to repair and change the file system and back, mount the partitions manually (can only select SD Card), factory resetting and fixing SELinux contexts. None of those worked. No OS is currently installed TWRP version is 2.8.5.0
TheFrisianGamer said: I've been trying to fix a bootlooping Samsung Galaxy Core 2 by installing a custom rom, but after installing Lineage twice (and failing) I tried to wipe the folders again to try to install a different rom. This was met with multiple errors "E : Unable to mount '/data'" and the likes. I've already tried to repair and change the file system and back, mount the partitions manually (can only select SD Card), factory resetting and fixing SELinux contexts. None of those worked. No OS is currently installed TWRP version is 2.8.5.0 Click to expand... Click to collapse sed -i 's/forceencrypt/encryptable/g' /vendor/etc/fstab (or fstab name under that directory) should fix /data issues but use TWRP with adb shell
TheFrisianGamer said: I've been trying to fix a bootlooping Samsung Galaxy Core 2 by installing a custom rom, but after installing Lineage twice (and failing) I tried to wipe the folders again to try to install a different rom. This was met with multiple errors "E : Unable to mount '/data'" and the likes. I've already tried to repair and change the file system and back, mount the partitions manually (can only select SD Card), factory resetting and fixing SELinux contexts. None of those worked. No OS is currently installed TWRP version is 2.8.5.0 Click to expand... Click to collapse Wich ROM did you installed? I'm looking for ROM's for SM-G355HN and can't find anything... So I'm trying to port form SM-G355H to SM-G355HN (no success at the moment)
S7+ Android 12 - Cannot Mount /system?
Hi all, Just unlocked bootloader of my S7+ and had Magisk / TWRP installed (https://forum.xda-developers.com/t/twrp-for-the-samsung-galaxy-tab-s7-5g-t976b.4163853/) I was trying to install the Debloater module for Magisk. I tried to install first using Magisk Manager but it always gave me an error. I felt curious and decided to install from TWRP instead. But under TWRP it just gave me an error 1 when it was trying to mount /system , so that installation always failed. I went to Advanced Wipe trying to repair the partition. Interestingly, /system wasn't among the listed options. I seem to be able to browse the files under /system using TWRP's file manager just fine. So what's with the inability to mount it? Any help is appreciated. Thanks! I've flashed multi disabler and VBmeta (that didn't seem to matter)