Hello,
I've just burned the atvXperience v3 but a lot of functions do not seem to work. I want to try the v2 ([S905X] v2FF 1GB/2GB RAM - DDR3/DDR4 (18 Oct 2018)) but when I'm holding reset + inserting power cable + USB Burning Tool, the device does not boot into the recovery mode. Any suggestions here? Also are there any alternatives to the atvXperience?
Thanks,
Arthur
Hi, Unfortunately you've the new 8.0 uboot which just makes the device unfit for USB Burning Tools.
What you'll have to do is:
1. Find an OTA ZIP package and flash with recovery.
OR
2. Get a UART and force flash the device using it.
Sent from my RMX1901 using Tapatalk
for anyone looking for mask rom mode for this device i have figured out the pins that need shorting by trial and error, may be useful to someone
Mask Rom Mode - Google Drive
drive.google.com
Related
Hi all,
I have a minix U1 that was wiped (no OS). TWRP is installed and I can boot to it (hold power for 6 seconds).
I am trying to install the stock Minix ROM FW013 (most recent) but when booting into TWRP the USB Burning Tool does not connect to the box. I have tried multiple version of the burning tool, currently have 2.0.8 installed.
Any idea how I can installed the stock IMG ROM?
Having a TWRP recovery installed does not always mean the recovery is working - are you certain it is the right version and that it works for your box?
And I fail to see what the recovery has to do with the burn tool - it should find the box if you use the correct connection and start procedure.
Plus - if the firmware is not for the burn tool but in fact to be used with the recovery then you should be able to flash it with TWRP directly.
I updated TWRP and ensured it was the right version for my unit
Connect procedure is open the burning tool>connect OTG cable>hold power button for 6 seconds from off state to enter TWRP
My laptop makes the USB connected nose but the burning tool doesn't display anything
Minix U1 fw install
Simple way is to start the usb Burn tool on your computer, load the FW image, then select start. Now ensure box is powered off, plug in usb cable to computer and box. Press and hold the power button and listen for the bling bing sound of the usb burn tool on windows, then release the power button, it will load the fw. Make sure you have no other usb dongles or scares in the device. Works for me every time.
Please refer to the manufacturer's official firmware guide to recover your device.
Check official forum of Minix and official guide at: NEO U1 full system image reflashing guide
Hello guys
I'm really desperate creating this topic, but about a problem i have with the flashtoom for my x96 Mini S905w
So far, i've tried
Using different versions of the USB burning tool program (2.06, 2.09,2.16)
Using differente firmwares (atvx 2FF, 2C, 2F, official x96 mini firmware 12052018, amlogic upgrade firmware)
Using Windows 10 and windows 7
Ticking and unticking erase flash (with normal erase, force, erase all) in every combination
Plugging USB while pressing the reset button with and without power plug
All of them give the same error : 0x10303004 (as attached in the image) at 4% percent uboot
Whats worse, the box seems to be softbrick (black screen on tv, nothing showing, even tried flashing with usb card maker with no luck, no recovery showing at all) at some point, still blue light, still recognized by computer but no sign of image or recovery on tv, even with sd card or usb recovery to flash (yes, i pressed the reset button too)
Am i missing something or something that i havent try yet? is it brick for good? I even open the box and attach the image, i think im using the correct firmwares. Please let me know if theres any solution to this. Im attaching the error log too.
Try T95S1 Image
Still having problems?
I think you will have to use the short pin method.
I can send you the photo of the board and which pins you have to short.
I'm not home right now.
Enviado do meu POCOPHONE F1 através do Tapatalk
can someone help me...how to enter recovery in X96 mini i want to flash it but i can not... there is a pin in AV hole which i keep pressing but no recovery mode, also PC does not see device etc...heeeeeeeeelp
You are flashing ROMs for s905w, instead of s905x.
Check below links for compatible ROM
http://firmware.duckdns.org/
https://forum.freaktab.com/forum/tv...s905x/others-aml-s905x/firmware-roms-tools-bx
https://mega.nz/#F!GEpQmQhZ!ezNEXQdnyNIhm2axjnfTIg
If your LED is red and not turning blue, try to power on using USB male A cable and power adaptor.
elazu1 said:
Hello guys
I'm really desperate creating this topic, but about a problem i have with the flashtoom for my x96 Mini S905w
So far, i've tried
Using different versions of the USB burning tool program (2.06, 2.09,2.16)
Using differente firmwares (atvx 2FF, 2C, 2F, official x96 mini firmware 12052018, amlogic upgrade firmware)
Using Windows 10 and windows 7
Ticking and unticking erase flash (with normal erase, force, erase all) in every combination
Plugging USB while pressing the reset button with and without power plug
All of them give the same error : 0x10303004 (as attached in the image) at 4% percent uboot
Whats worse, the box seems to be softbrick (black screen on tv, nothing showing, even tried flashing with usb card maker with no luck, no recovery showing at all) at some point, still blue light, still recognized by computer but no sign of image or recovery on tv, even with sd card or usb recovery to flash (yes, i pressed the reset button too)
Am i missing something or something that i havent try yet? is it brick for good? I even open the box and attach the image, i think im using the correct firmwares. Please let me know if theres any solution to this. Im attaching the error log too.
Click to expand...
Click to collapse
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
hi, i would reccomend my android TV 7 ROM for nexbox a95x devices, fast & stable, as for device not being detected by burn tool, you've tried multiple ports on your PC & box?
It will be nice if you can provide me a stable rom for my A95x
Can you please provide me some link to download it.
About the burning tool and the ports....i have 2 USB ports. I've try in both of them. In one of the port i'm managing to connect it to the burning tool but after few minutes i'm loosing the connection for unknown reason for me. I'm suspecting that maybe due to a issue with the images with which i try to install with the USB burning tool.
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
hitreca said:
Hello,
i have some old NEXBOX A95X-B7N with 1gb RAM and 8gb ROM
I'm trying to install some custom ROM but i can't.
First problem is when i try to access the recovery mode i can't somehow it is skiping it when it's booting.
I'm starting it while i'm hoding the reset button into the AV port and still i can't view and access the recovery mode. I try also with USB to USB cable and USB Burning tool but i can't find proper ROM.
I will be very happy if someone advice me what to do ?
I need some rom which will work and some advice why i can't access the recovery mode. I think there are some installed rom already, but it's not from me.
Thank you in advanced.
Click to expand...
Click to collapse
I had no problem to install atvx into exactly same device.
Keep a95x disconnected from everything. Press AV button and hold it while you plug usb cable to right usb port. You mustn't plug power cable. Only usb.
You windows will connect to a95x if amlogic tool is running
And if that dosntvwork then you may need to use mask rom mode to force burning tool to see the device
aidanmacgregor said:
In the video description there is download link for S905X, There is a Nexbox specific version (so the IR remote control & sleep works)
Download
Click to expand...
Click to collapse
Hi Aidan, I flashed my a95x 2/16 with your rom and it’s just stuck on boot screen, when I try flash again it fails with usb burning tool, any suggestions?
Hi folks
I'm reading the guide on how to downgrade my Mi Box and getting a little stuck.
I can boot into recovery mode fine - that works.
If I turn on USB debugging in the interface, I can adb to the box using USB A to USB A - that works.
I load the firmware image into the USB burning tool, and I start up recovery mode.
I then pull the power out the back and hold down back and ok button and put power back in - all that happens is I get back to the recovery menu again - nothing on the USB burning tool starts up.
I read something about maybe shorting pins inside - Does anyone have any info on this, or is there any other way of applying the firmware?
Thanks everyone
supermanscott said:
Hi folks
I'm reading the guide on how to downgrade my Mi Box and getting a little stuck.
I can boot into recovery mode fine - that works.
If I turn on USB debugging in the interface, I can adb to the box using USB A to USB A - that works.
I load the firmware image into the USB burning tool, and I start up recovery mode.
I then pull the power out the back and hold down back and ok button and put power back in - all that happens is I get back to the recovery menu again - nothing on the USB burning tool starts up.
I read something about maybe shorting pins inside - Does anyone have any info on this, or is there any other way of applying the firmware?
Thanks everyone
Click to expand...
Click to collapse
Follow this guide this is in Russian language.
Xiaomi Mi Box 2016 [Android TV] - 4PDA
Xiaomi Mi Box 2016 [Android TV], [TV Box]
4pda.to
I have written guide to downgrade from 9 to 8.
Mi Box 3 (MDZ-16-AB) downgrade Android 9 Pie to Android 8 oreo
[QUOTE =“ 372812,帖子:84011735,成员:8569207”] 你能分享源链接吗 您可以共享源的原始链接吗? 当我保持公USB电缆连接(pc到mibox3)时,我无法进入恢复,首先必须断开公USB电缆,这样才能访问恢复,是这样吗?另一件事是,连接到PC的USB电缆无法立即识别mi盒。 您是否不需要像16-AA版本那样打开mibox3来缩短时间? 我正在使用Windows 10 Home,并且如果可以安装驱动程序,则已经使用了公对公电缆来刷新其他设备。 [/引用]...
forum.xda-developers.com
I bought a new Android 11 box tv - X96 max + ultra
box does use AOSP stock firmware from oct. 2022
I am trying to flash a new Slimbox ATV firmware using AML USB burn tool 3.2.0 suite and USB cable and Win 10 64 bit PC
the problem Is that I can't succeed to get appearing from box tv In AML USB burn tool work plot
I have tried to connect It using usb port v2 , v3, with and without original power adapter, pushing boot button, but all I can achieve Is to get box recovery window
I would be glad If someone can advise what to try to get box appearing In AML USB burn tool work plot
sas231 said:
I bought a new Android 11 box tv - X96 max + ultra
box does use AOSP stock firmware from oct. 2022
I am trying to flash a new Slimbox ATV firmware using AML USB burn tool 3.2.0 suite and USB cable and Win 10 64 bit PC
the problem Is that I can't succeed to get appearing from box tv In AML USB burn tool work plot
I have tried to connect It using usb port v2 , v3, with and without original power adapter, pushing boot button, but all I can achieve Is to get box recovery window
I would be glad If someone can advise what to try to get box appearing In AML USB burn tool work plot
Click to expand...
Click to collapse
all i know is you have to use AML_USB_burn_tool, which I have no clue how to use. I actually found your post trying to figure out how to use it.
sas231 said:
I bought a new Android 11 box tv - X96 max + ultra
box does use AOSP stock firmware from oct. 2022
I am trying to flash a new Slimbox ATV firmware using AML USB burn tool 3.2.0 suite and USB cable and Win 10 64 bit PC
the problem Is that I can't succeed to get appearing from box tv In AML USB burn tool work plot
I have tried to connect It using usb port v2 , v3, with and without original power adapter, pushing boot button, but all I can achieve Is to get box recovery window
I would be glad If someone can advise what to try to get box appearing In AML USB burn tool work plot
Click to expand...
Click to collapse
Do Not Apply Power & Do Not Push AV Port Reset Button - Follow exact steps video From 14:33 forward - Good Luck.