Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
reggiexp said:
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
Click to expand...
Click to collapse
SP Flash Tool works through preloader. Usually when you power up your phone, preloader kicks in first and sets up it's own device on USB port. You have a split second to start talking to it, otherwise it will load the next part of software, which will set up another device on the port.
What do you have to do:
Double-check your USB cable! Cable problems can lead to weird errors in SPF tool.
Shut down your phone completely, remove/insert the battery after it to be 100% sure that the phone is shut down.
Set up SPF Tool, hit download button
Connect your phone to PC via USB cable
At this step, your phone should power up, but if it doesn't in reasonable time (say, 10 seconds), press the power button to switch it on
If everything done right, the following happens:
Your PC finds "mediatek preloader" device or something similar
Red progress bar starts running in SPF tool, it means DL helper firmware is being transferred to the phone
Blue (or green) progress bar starts running, indicating your data being downloaded
A window with green circle appears, your data has been uploaded successfully
Hi all,
I have a minix U1 that was wiped (no OS). TWRP is installed and I can boot to it (hold power for 6 seconds).
I am trying to install the stock Minix ROM FW013 (most recent) but when booting into TWRP the USB Burning Tool does not connect to the box. I have tried multiple version of the burning tool, currently have 2.0.8 installed.
Any idea how I can installed the stock IMG ROM?
Having a TWRP recovery installed does not always mean the recovery is working - are you certain it is the right version and that it works for your box?
And I fail to see what the recovery has to do with the burn tool - it should find the box if you use the correct connection and start procedure.
Plus - if the firmware is not for the burn tool but in fact to be used with the recovery then you should be able to flash it with TWRP directly.
I updated TWRP and ensured it was the right version for my unit
Connect procedure is open the burning tool>connect OTG cable>hold power button for 6 seconds from off state to enter TWRP
My laptop makes the USB connected nose but the burning tool doesn't display anything
Minix U1 fw install
Simple way is to start the usb Burn tool on your computer, load the FW image, then select start. Now ensure box is powered off, plug in usb cable to computer and box. Press and hold the power button and listen for the bling bing sound of the usb burn tool on windows, then release the power button, it will load the fw. Make sure you have no other usb dongles or scares in the device. Works for me every time.
Please refer to the manufacturer's official firmware guide to recover your device.
Check official forum of Minix and official guide at: NEO U1 full system image reflashing guide
Hey, i have a Xiaomi Note 3 Pro Kenzo and one day he just turned off and never went back again. When i plug it on pc, it just shows black screen, flashes the red light multiple times and it's recognized as Qualcomm HS-USB Diagnostics 900E.
I've already searched online and seems that my phone is stuck on EDL mode, so I made it go to the real EDL mode that allows me to flash it a new rom. I managed to make my pc recognize as Qualcomm 9008.
Beeing that, I tried to flash a rom but at the mi flash 20160330 it gets stuck on: "send nop command" forever and at the mi flash 2170425 it gets the error : "<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data> "
I've got another redmi note 3 pro, and I can flash it, so I don't there's any problem with my computer, but the info is:
Windows 10 Pro 64x
Safe Drivers Disable
If anyone can help...
gustavoabonare said:
Hey, i have a Xiaomi Note 3 Pro Kenzo and one day he just turned off and never went back again. When i plug it on pc, it just shows black screen, flashes the red light multiple times and it's recognized as Qualcomm HS-USB Diagnostics 900E.
I've already searched online and seems that my phone is stuck on EDL mode, so I made it go to the real EDL mode that allows me to flash it a new rom. I managed to make my pc recognize as Qualcomm 9008.
Beeing that, I tried to flash a rom but at the mi flash 20160330 it gets stuck on: "send nop command" forever and at the mi flash 2170425 it gets the error : "<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data> "
I've got another redmi note 3 pro, and I can flash it, so I don't there's any problem with my computer, but the info is:
Windows 10 Pro 64x
Safe Drivers Disable
If anyone can help...
Click to expand...
Click to collapse
Seems like a problem with the emmc chip. Get the device checked to make sure that your emmc is not faulty. If the emmc is safe, contact me and I'll help. Until then good luck.
Archit9169 said:
Seems like a problem with the emmc chip. Get the device checked to make sure that your emmc is not faulty. If the emmc is safe, contact me and I'll help. Until then good luck.
Click to expand...
Click to collapse
Thx for the reply man, the problem is that i live in Brazil, we don't have Xiaomi assistance, so I don't have a place to get it checked ;x.
But yeah, I saw in other forums that this migth be a EMMC problem
gustavoabonare said:
Thx for the reply man, the problem is that i live in Brazil, we don't have Xiaomi assistance, so I don't have a place to get it checked ;x.
But yeah, I saw in other forums that this migth be a EMMC problem
Click to expand...
Click to collapse
Forget about warranty, get it checked at a local store.
I have faced this too ,3 months ago , you just need to open the case and then remove the unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
---------- Post added at 04:27 AM ---------- Previous post was at 04:26 AM ----------
I have faced this too ,3 months ago , you just need to open the case and then unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
Deep flash cable
Try flashing after removing the battery like Aditya said it worked on my friends phone.
[email protected] said:
I have faced this too ,3 months ago , you just need to open the case and then remove the unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
Click to expand...
Click to collapse
Thx man, will try when I get back from work
balazs312 said:
Deep flash cable
Click to expand...
Click to collapse
It's already in EDL 9008 mode, I used the test point. Don't know if the DFC will do anything different, but will try it anyway if the way Aditya told me don't work
I should explain you fully
1)removing battery will keep the phone in edl mode but it will solve your error of mi flash is mi flash will successfully flash the fastboot ROM ,remember you need to first remove the battery cable then insert phone ,no light will blink but it will be recognized as qsp loader port in your PC ,don't worry
2) after successfully completing the first step flash the complete fastboot ROM ,it should go success
3)now don't replug the battery cable now ,do nothing ,just insert cherger and press power button as long as the screen don't turn on ,when it will turn on the battery bar wouldn't go up, then without removing the charger cable from phone ,insert battery, you will see that battery is still not charging, nothing to worry this was just to turn the display on ,now again press the power button for 10 to 14 sec so that the device reboot and boom your phone will start charging and after you can successfully boot into system and use your phone.
4)this is if you still cannot successfully flash using mi flash tool just unplug all a the cable which you see after opening back case don't worry you just have to open the cables which you see ,you don't have to unplug those cables in which you have to open screws etc .
Hope this will help you
[email protected] said:
I should explain you fully
1)removing battery will keep the phone in edl mode but it will solve your error of mi flash is mi flash will successfully flash the fastboot ROM ,remember you need to first remove the battery cable then insert phone ,no light will blink but it will be recognized as qsp loader port in your PC ,don't worry
2) after successfully completing the first step flash the complete fastboot ROM ,it should go success
3)now don't replug the battery cable now ,do nothing ,just insert cherger and press power button as long as the screen don't turn on ,when it will turn on the battery bar wouldn't go up, then without removing the charger cable from phone ,insert battery, you will see that battery is still not charging, nothing to worry this was just to turn the display on ,now again press the power button for 10 to 14 sec so that the device reboot and boom your phone will start charging and after you can successfully boot into system and use your phone.
4)this is if you still cannot successfully flash using mi flash tool just unplug all a the cable which you see after opening back case don't worry you just have to open the cables which you see ,you don't have to unplug those cables in which you have to open screws etc .
Hope this will help you
Click to expand...
Click to collapse
Hey man, didn't work, I disconnected the battery as you said and still got the error when I tried to flash. I downloaded the last rom available from xiaomi site (kenzo_global_images_V9.5.3.0.MHOMIFA_20180405.0000.00_6.0_global_7b6353b764), but still nothing.
I guess it's the EMMC chip alright ;x, but thx anyway
Bro sorry that I couldn't help but can you please try unpluging the cable as shown in the figure and then try to flash using mi flash tool if it still even don't help sorry bro
Unplug the cable given in figure and then try to flash using mi flash , if the device is not detected then replug that cable and and then try to flash if it still don't help sorry bro
[email protected] said:
Bro sorry that I couldn't help but can you please try unpluging the cable as shown in the figure and then try to flash using mi flash tool if it still even don't help sorry bro
Unplug the cable given in figure and then try to flash using mi flash , if the device is not detected then replug that cable and and then try to flash if it still don't help sorry bro
Click to expand...
Click to collapse
Already tried, didn't work, but thx anyways man
Just plug it in to a wall charger. I had the same issue even after edl flash miui rom but charging it fixed my problem. Follow these steps.
1- plug it in
2- ignore the red led blinking
3- wait for 5 min.
4- it will boot.
5- if doesn't, I'm sorry
Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)
Hi,
T95Q TV box keeps rebooting so I am trying to install poison rom to solve this.
The problem is that the usb burning tool v3.1.0 does not detect the box. Since the AV button of the box is broken, I am trying to reboot to recovery mode with Quick Reboot app (I do not know if this is the same with the recovery button).
The procedure I follow is to connect tv box to PC (Windows 10 in test mode) via usb and reboot to recovery mode with Quick Reboot app. TV box is not detected.
Any ideas?
adiaforetos2 said:
Hi,
T95Q TV box keeps rebooting so I am trying to install poison rom to solve this.
The problem is that the usb burning tool v3.1.0 does not detect the box. Since the AV button of the box is broken, I am trying to reboot to recovery mode with Quick Reboot app (I do not know if this is the same with the recovery button).
The procedure I follow is to connect tv box to PC (Windows 10 in test mode) via usb and reboot to recovery mode with Quick Reboot app. TV box is not detected.
Any ideas?
Click to expand...
Click to collapse
ok so you have a few options, your 1st is to try shorting the contackt where the button was (baisically instead of button you just bridge the gap) ot if you dont have any pads left (maybe broke off with button) then your other option is mask rom mode (by shorting 2 pins usally on your nand/emmc chip while connecting USB)