Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
reggiexp said:
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
Click to expand...
Click to collapse
SP Flash Tool works through preloader. Usually when you power up your phone, preloader kicks in first and sets up it's own device on USB port. You have a split second to start talking to it, otherwise it will load the next part of software, which will set up another device on the port.
What do you have to do:
Double-check your USB cable! Cable problems can lead to weird errors in SPF tool.
Shut down your phone completely, remove/insert the battery after it to be 100% sure that the phone is shut down.
Set up SPF Tool, hit download button
Connect your phone to PC via USB cable
At this step, your phone should power up, but if it doesn't in reasonable time (say, 10 seconds), press the power button to switch it on
If everything done right, the following happens:
Your PC finds "mediatek preloader" device or something similar
Red progress bar starts running in SPF tool, it means DL helper firmware is being transferred to the phone
Blue (or green) progress bar starts running, indicating your data being downloaded
A window with green circle appears, your data has been uploaded successfully
Related
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Once the red line loads, try putting back the battery. Sometimes the handset needs power from the battery. I did that with my HT3: once SP Flash Tool detected my phone, I put the battery back.
Hi, i bought power 2, phone not open and noting happen when press power or vol+ - together + power, or ....try everything
Bricked when try flash twrp recovery. later i try flash rom again, my computer see phone when phone is closed. can not open already. But now my computer not see the phone:A request for the USB device descriptor failed.
What can i do, and sorry for my english
This phone can't be bricked (mostly). You can easily restore the stock firmware, just download stock rom from official site, extract it. And use sp flash tool not the one that comes with the official rom. Open sp flash tool.
Load scatter file from official rom, you can leave the DA file for all mtk phones that comes with stock rom or use the one in sp flash tool (just leave it as it is) in the user interface of sp flash tool.
Make sure it says "download only" from the drop box. Click download then connect the phone to your computer. Flashing will start and should take about 1 minute and 30 seconds to finish.
If flashing doesn't start. Make sure you have vcom drivers installed. (Also for flashing to start, phone must be turned off obviously, but since you have semi brick, you don't have to worry about that).
Rebel_X said:
This phone can't be bricked (mostly). You can easily restore the stock firmware, just download stock rom from official site, extract it. And use sp flash tool not the one that comes with the official rom. Open sp flash tool.
Load scatter file from official rom, you can leave the DA file for all mtk phones that comes with stock rom or use the one in sp flash tool (just leave it as it is) in the user interface of sp flash tool.
Make sure it says "download only" from the drop box. Click download then connect the phone to your computer. Flashing will start and should take about 1 minute and 30 seconds to finish.
If flashing doesn't start. Make sure you have vcom drivers installed. (Also for flashing to start, phone must be turned off obviously, but since you have semi brick, you don't have to worry about that).
Click to expand...
Click to collapse
Vdcom drivers already installed but not using. becouse computer does not see phone.
Unknown usb device . A request for the USB device descriptor failed. (code 43)
if i solve this, maybe i can flash rom
Rebel_X said:
This phone can't be bricked (mostly). You can easily restore the stock firmware, just download stock rom from official site, extract it. And use sp flash tool not the one that comes with the official rom. Open sp flash tool.
Load scatter file from official rom, you can leave the DA file for all mtk phones that comes with stock rom or use the one in sp flash tool (just leave it as it is) in the user interface of sp flash tool.
Make sure it says "download only" from the drop box. Click download then connect the phone to your computer. Flashing will start and should take about 1 minute and 30 seconds to finish.
If flashing doesn't start. Make sure you have vcom drivers installed. (Also for flashing to start, phone must be turned off obviously, but since you have semi brick, you don't have to worry about that).
Click to expand...
Click to collapse
My phone opened, but computer cannot see storage.i think phone's usb ports damaged. i can flash rom with sp flash tool only.
fastboot and recovery not working. i cant make root too. what can i do i dont know. recovery cant open, writing "no command".
faysoft said:
My phone opened, but computer cannot see storage.i think phone's usb ports damaged. i can flash rom with sp flash tool only.
fastboot and recovery not working. i cant make root too. what can i do i dont know. recovery cant open, writing "no command".
Click to expand...
Click to collapse
Go to developer mode menu (if you don't have it, tap on "build number" in "about phone" from settings, seven times and it will be activated). Then change how your USB acts when connected with computer.
If you can't, just use ES File explorer to send files between your computer and phone in FTP or SMB mode over WiFi.
Have the same problam.
The pc recognize the vcom device but only for 2-3 secconds and then disaper, then i get an error with sp flashtool.
Phone isnt tured on. At all.
I also have the same problem.
Is anyone has success with unbricking Power II in such case?
pacmancoder said:
I also have the same problem.
Is anyone has success with unbricking Power II in such case?
Click to expand...
Click to collapse
I do not know if it is late. I had the same problem with another phone. I was solved as follows:
1. Unplug the usb cable from the computer
2. Power off the phone
3. Press download on sp flash tool
4. Holding vol+ and power, plug the usb cable on the computer.
Hi,
can anyone provide me with nvram /nvdata backup please of Ulephone power 2?
I have probably correct IMEI, valid MAC fo Wifi/BT ...
It looks like my serial number changed to 123456789ABCDEF and I have no idea how to change it to original because MAUI (?) stucked on get kernel
I can find original box with correct serial and IMEis on stick
The only one problem with mobile is I am not able connect to mobile network - registration SIM to mobile network always fail.
and at MTK engineer I have only Bluetooth, FM Receiver, Wifi, Wifi CTIA, Wifi Display
I have nothing like Radio, CDS etc ...
OEM unlocked, TWRP, rooted
Some information probably lost when flashing
And of course another problem :
except GPS and proximity, all sensors does not work - G sensor, acceleration, magnetic sensor, compass . Probably configuration data is located at nvdata
i tried flash 5MB file nvdata.bin from different MTK 675x device, but nothings change
I tried flash 33 MB nvdata.img from same MTK 675x device, but I lost IMEI and nothing solved
This is why I need 33 MB NVDATA.IMG from another functional Ulephone power 2
I can change IMEI at MTK then ...
I had to flash , because phone was unusable - it stucked mostly on obtaining IP address wifi
after a while, phone disconnected from wifi and cant find any wifi or if find, then cant connect because of some security issue , after restart all was OK ...
Thanks
Hello.
Everything has gone terribly wrong for my phone and I desperately need your help.
I downloaded what was stated on needrom.com I made sure MTK vcom was installed properly and had the correct rom from needrom.com but I still got Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP flash when using MTK_AllInOne_da.bin.
I then tried DA_PL.bin and got another error. I tried to uncheck preloader and run Download through SP flash with DA_PL.bin which worked just fine. However now I'm stuck at the Bluboo logo screen and phone does not load into android.
I still get Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP Flash if I use MTK_AllInOne_da.bin but if I use DA_PL.bin now I get this error:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Please help me, my phone is bricked until one of you help me. I'd be forever grateful!
Tomaskaos said:
Hello.
Everything has gone terribly wrong for my phone and I desperately need your help.
I downloaded what was stated on needrom.com I made sure MTK vcom was installed properly and had the correct rom from needrom.com but I still got Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP flash when using MTK_AllInOne_da.bin.
I then tried DA_PL.bin and got another error. I tried to uncheck preloader and run Download through SP flash with DA_PL.bin which worked just fine. However now I'm stuck at the Bluboo logo screen and phone does not load into android.
I still get Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP Flash if I use MTK_AllInOne_da.bin but if I use DA_PL.bin now I get this error:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Please help me, my phone is bricked until one of you help me. I'd be forever grateful!
Click to expand...
Click to collapse
Don`t worry about that, first this is the link of the last update https://www.google.com/url?q=https:...ds-cse&usg=AFQjCNFJKeEcDClPU2MnxLJefaQ19GmQpQ
for more success put your folder of SPFlash Tool near to folder of your unpacked rom (for short transmission of data) and Bluboo S1 has a few different way to enter to other mtk cause battery it`s not removable like other just disconnect it and connect again; in this case connect cable usb to your device, prepare all the files in SPFlashTool and click download and now while pressing both volume + and - connect cord to pc till SPFlashTool begin to recognize files (red letters) and release now, SPFlashTool continues process till 100% in yellow progressing line
SubwayChamp said:
Don`t worry about that, first this is the link of the last update https://www.google.com/url?q=https:...ds-cse&usg=AFQjCNFJKeEcDClPU2MnxLJefaQ19GmQpQ
for more success put your folder of SPFlash Tool near to folder of your unpacked rom (for short transmission of data) and Bluboo S1 has a few different way to enter to other mtk cause battery it`s not removable like other just disconnect it and connect again; in this case connect cable usb to your device, prepare all the files in SPFlashTool and click download and now while pressing both volume + and - connect cord to pc till SPFlashTool begin to recognize files (red letters) and release now, SPFlashTool continues process till 100% in yellow progressing line
Click to expand...
Click to collapse
Thanks!!! It works!!!!
Just be very careful. The USB C connector port in the phone is very loose... so make sure you can hold the cable tight other wiser it will lose the connection and brick your phone. For me, I had to remove the Plastic cover to be able to hold the power cable tight!
Hi, could you help me please? I did your steps, but it is not working. Sp flash does all its job, shows the green sign, but the phone stills dead. What I noticed the usb connects with the phone, then it disconnects. I tried to install the drivers as the tutorials say like deactivating the driver signature enforcement, but nothig happens well.
So I need to fix one of these and there's no zip or img of the ROM for it. There's a SP Flash tool backup but I can't use that because the device boots as soon as I connect it to my PC. I can only boot it into TWRP or fastboot mode. Is there a working ROM I can put on this? It really doesn't matter what, any ROM that can make it boot is fine.
You dont have correct drivers, if you have correct drivers the tablet WONT boot when plugged in for SPTools.
uninstall all your mtk drivers, all the vcom drivers, spflash tools...etc... reboot pc
I'm using spflashtools 5.1648.00: http://www.mediafire.com/file/qwgshp..._5.1648.00.rar dont run it yet.
I had to do THIS before I could do anything else, install the vcom drivers following this exactly: https://forum.xda-developers.com/ele...32-64-t3267033 reboot pc
Now, install this using the inbuilt installer: http://mtkusballdriver.com/download/mtk-usb-v1-0-1 and reboot pc once done.
NOW open sptools AS ADMIN, turn tablet off, open your sptools backup/rom in sptools, select FORMAT ALL AND DOWNLOAD from the drop down menu, press the green arrow download button and the 'stop' button will change colour.
plug the tablet to usb and the bottom bars on the flash tool should go red, then purple, then a slow yellow bar. Keep waiting until a box with a green circle pops up saying OK.
If it doesnt work, try another usb lead, try another port, if that doesnt work try a DIFFERENT sptools version, and another , and another... until you find one particular version that works with your particular tablet on your particular PC, it sounds so pointless but trust me from experience one that works for 99 people wont work for 1
9002a and 9002x
You can use a 9002x firmware for a 9002a it works great,
There are others as well, Use the sp slash tools to do it.
alcatel one touch pixi 3(7) 8055 firmware
can anyone please help me to this problem.. i try to fix my alcatel one touch pixi 3 7 by flashing the stock firmware but after flashing firmware using sp flash tool the error message pop up then flashing stop.. now my tablet wont open nor charging.. what should i do please help.
is there any custom rom for alcatel onetouch pixi 3 (7) 9002 tablet?