Hi, i bought power 2, phone not open and noting happen when press power or vol+ - together + power, or ....try everything
Bricked when try flash twrp recovery. later i try flash rom again, my computer see phone when phone is closed. can not open already. But now my computer not see the phone:A request for the USB device descriptor failed.
What can i do, and sorry for my english
This phone can't be bricked (mostly). You can easily restore the stock firmware, just download stock rom from official site, extract it. And use sp flash tool not the one that comes with the official rom. Open sp flash tool.
Load scatter file from official rom, you can leave the DA file for all mtk phones that comes with stock rom or use the one in sp flash tool (just leave it as it is) in the user interface of sp flash tool.
Make sure it says "download only" from the drop box. Click download then connect the phone to your computer. Flashing will start and should take about 1 minute and 30 seconds to finish.
If flashing doesn't start. Make sure you have vcom drivers installed. (Also for flashing to start, phone must be turned off obviously, but since you have semi brick, you don't have to worry about that).
Rebel_X said:
This phone can't be bricked (mostly). You can easily restore the stock firmware, just download stock rom from official site, extract it. And use sp flash tool not the one that comes with the official rom. Open sp flash tool.
Load scatter file from official rom, you can leave the DA file for all mtk phones that comes with stock rom or use the one in sp flash tool (just leave it as it is) in the user interface of sp flash tool.
Make sure it says "download only" from the drop box. Click download then connect the phone to your computer. Flashing will start and should take about 1 minute and 30 seconds to finish.
If flashing doesn't start. Make sure you have vcom drivers installed. (Also for flashing to start, phone must be turned off obviously, but since you have semi brick, you don't have to worry about that).
Click to expand...
Click to collapse
Vdcom drivers already installed but not using. becouse computer does not see phone.
Unknown usb device . A request for the USB device descriptor failed. (code 43)
if i solve this, maybe i can flash rom
Rebel_X said:
This phone can't be bricked (mostly). You can easily restore the stock firmware, just download stock rom from official site, extract it. And use sp flash tool not the one that comes with the official rom. Open sp flash tool.
Load scatter file from official rom, you can leave the DA file for all mtk phones that comes with stock rom or use the one in sp flash tool (just leave it as it is) in the user interface of sp flash tool.
Make sure it says "download only" from the drop box. Click download then connect the phone to your computer. Flashing will start and should take about 1 minute and 30 seconds to finish.
If flashing doesn't start. Make sure you have vcom drivers installed. (Also for flashing to start, phone must be turned off obviously, but since you have semi brick, you don't have to worry about that).
Click to expand...
Click to collapse
My phone opened, but computer cannot see storage.i think phone's usb ports damaged. i can flash rom with sp flash tool only.
fastboot and recovery not working. i cant make root too. what can i do i dont know. recovery cant open, writing "no command".
faysoft said:
My phone opened, but computer cannot see storage.i think phone's usb ports damaged. i can flash rom with sp flash tool only.
fastboot and recovery not working. i cant make root too. what can i do i dont know. recovery cant open, writing "no command".
Click to expand...
Click to collapse
Go to developer mode menu (if you don't have it, tap on "build number" in "about phone" from settings, seven times and it will be activated). Then change how your USB acts when connected with computer.
If you can't, just use ES File explorer to send files between your computer and phone in FTP or SMB mode over WiFi.
Have the same problam.
The pc recognize the vcom device but only for 2-3 secconds and then disaper, then i get an error with sp flashtool.
Phone isnt tured on. At all.
I also have the same problem.
Is anyone has success with unbricking Power II in such case?
pacmancoder said:
I also have the same problem.
Is anyone has success with unbricking Power II in such case?
Click to expand...
Click to collapse
I do not know if it is late. I had the same problem with another phone. I was solved as follows:
1. Unplug the usb cable from the computer
2. Power off the phone
3. Press download on sp flash tool
4. Holding vol+ and power, plug the usb cable on the computer.
Hi,
can anyone provide me with nvram /nvdata backup please of Ulephone power 2?
I have probably correct IMEI, valid MAC fo Wifi/BT ...
It looks like my serial number changed to 123456789ABCDEF and I have no idea how to change it to original because MAUI (?) stucked on get kernel
I can find original box with correct serial and IMEis on stick
The only one problem with mobile is I am not able connect to mobile network - registration SIM to mobile network always fail.
and at MTK engineer I have only Bluetooth, FM Receiver, Wifi, Wifi CTIA, Wifi Display
I have nothing like Radio, CDS etc ...
OEM unlocked, TWRP, rooted
Some information probably lost when flashing
And of course another problem :
except GPS and proximity, all sensors does not work - G sensor, acceleration, magnetic sensor, compass . Probably configuration data is located at nvdata
i tried flash 5MB file nvdata.bin from different MTK 675x device, but nothings change
I tried flash 33 MB nvdata.img from same MTK 675x device, but I lost IMEI and nothing solved
This is why I need 33 MB NVDATA.IMG from another functional Ulephone power 2
I can change IMEI at MTK then ...
I had to flash , because phone was unusable - it stucked mostly on obtaining IP address wifi
after a while, phone disconnected from wifi and cant find any wifi or if find, then cant connect because of some security issue , after restart all was OK ...
Thanks
Related
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
thanks!
AND THANKS FOR yuweng and rui1 who made this all possible!
anyway now I'm back to porting CM to our device. hopefully this helped somebody (and yes, I will be more careful this time)
Hi, it worked for me and i could unbrick my mtk6575
Hi, there
rom given in post worked for me
and i could finally unbrick my phone, but now it asks for the password to decrypt storage after boot. I don't know what to do.
please provide password or any solution to it.
my device is stuck on boot?
Havunen said:
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
Click to expand...
Click to collapse
my rooted mt6575(spice mi-315) device stuck on boot logo. i also tried clar cache and wipe all data bt still same boot logo appear . i am going to ur theard when i format whole flash except bootloader and navram. and connect my device to pc and error occured.....
does some know where to find a latest rom for my mtk 6575(samsung glx,y grand duo hard copy) plz i really need 1
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
gapps and cwm problems
soulindub said:
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
Click to expand...
Click to collapse
Quote:
Originally Posted by Snekhers
I need this informations roms!
Screen : 540x960
BB Chip : MT6577
Ms Board : Glaxy S3
IMEI1 : XXXXXX
IMEI2: XXXXXX
Modem Ver. : MAUI.11AMD.W11.50.SP.V12. 2012/09/20 18:56
Bar code : 030801050804260123456788.81_20390210
Build Time : 2012 10 17 15:02:47 CST
UBoot Ver. : 2010.06
Kernel Ver. : 4.1.1
SW Ver. : ALPS.ICS.MP.V2.6
Custom Build Verno. : 005121017
hi, a have same phone and is it possible update new rom? Why? Because thşs rom very stable but one except, google contacts cant sync.
And i m trying cwm install with MTKdroid tools its runing but ONLY ONE TAKE. After the reboot in CWM menu coming orginal factory recovery(yellow simple screen and only have test etc. menus) why? ((
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
reggiexp said:
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
Click to expand...
Click to collapse
SP Flash Tool works through preloader. Usually when you power up your phone, preloader kicks in first and sets up it's own device on USB port. You have a split second to start talking to it, otherwise it will load the next part of software, which will set up another device on the port.
What do you have to do:
Double-check your USB cable! Cable problems can lead to weird errors in SPF tool.
Shut down your phone completely, remove/insert the battery after it to be 100% sure that the phone is shut down.
Set up SPF Tool, hit download button
Connect your phone to PC via USB cable
At this step, your phone should power up, but if it doesn't in reasonable time (say, 10 seconds), press the power button to switch it on
If everything done right, the following happens:
Your PC finds "mediatek preloader" device or something similar
Red progress bar starts running in SPF tool, it means DL helper firmware is being transferred to the phone
Blue (or green) progress bar starts running, indicating your data being downloaded
A window with green circle appears, your data has been uploaded successfully
FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)
I did use Maui Meta tool in the past to restore IMEIs on slitely older MTK devices, but My current phone is based on MTK6768 with secure boot, needed the IMEIs to be written after flashing firmware. I can use SP flash tool with "sec boot" utility to flash ROM successfully, But unable to connect to Maui Meta tool. I have Modem meta tool Version 10.2044, after launching the program as an admin, it is doing the following:
1. Clicking "connect" and plugging the cable to phone in turned off state: windows make a hardware connect sound, a new port appear in device manager, followed by a disconnect sound after 1 second, that hardware disappear and phone boot-up in offline charging mode or to the welcome/lock screen. The "meta tool" remain at looking for device connection.
2. Holding the Volume down while plugging the Cable in, do the exact same - "meta Tool" remain in waiting for connection.
3. Holding Volume Up: it connect, then disconnect and went to Stock recovery - "meta tool" remain in waiting state.
4. Holding Power+Volume up: Windows continue making connect and disconnect sounds again and again and the Port under device manager keep coming in and out. Phone boots up as soon as I leave the buttons. "meta Tool" remain in waiting for connection, or sometime move to "getting Kernel Port" and get stuck at it.
5. Holding both volume buttons: do the exact same as point Number 4 above.
6. Holding both volumes+power buttons: do the exact same as point number 4 above.
Definitely, all MTK drivers are installed and working because I can use SP flash tool in conjunction with secBoot utility without any problem. I tried other similar tools like “SN writer” and “read and write tool v1.3” and faced almost same behaviour. It means my device is not going into Meta mode properly with these tools. Please contribute in helping me with your valuable suggestion, as I’m not being able to use this device due to cellular network unavailability.
You need to use Preloader Mode not MTK mode, look at Com Port driver, try boot device to normal mode and make power off then hold up and connect USB must get preloader device if get mtk USB port only not work, see mtk preloader to enter META mode
MA7MOD_GSM said:
You need to use Preloader Mode not MTK mode, look at Com Port driver, try boot device to normal mode and make power off then hold up and connect USB must get preloader device if get mtk USB port only not work, see mtk preloader to enter META mode
Click to expand...
Click to collapse
bro. he literally said preloader comes, but disconnects, + it gets stuck on getting kernel on sn flash tool.
I tried sn flash tool, it got stuck, I tried aftersalestool, it does not stuck, but it says:error code 6 get kernel port.
What do i do? I need to fix my IMEI very badly!
Abdullah5490 said:
I did use Maui Meta tool in the past to restore IMEIs on slitely older MTK devices, but My current phone is based on MTK6768 with secure boot, needed the IMEIs to be written after flashing firmware. I can use SP flash tool with "sec boot" utility to flash ROM successfully, But unable to connect to Maui Meta tool. I have Modem meta tool Version 10.2044, after launching the program as an admin, it is doing the following:
1. Clicking "connect" and plugging the cable to phone in turned off state: windows make a hardware connect sound, a new port appear in device manager, followed by a disconnect sound after 1 second, that hardware disappear and phone boot-up in offline charging mode or to the welcome/lock screen. The "meta tool" remain at looking for device connection.
2. Holding the Volume down while plugging the Cable in, do the exact same - "meta Tool" remain in waiting for connection.
3. Holding Volume Up: it connect, then disconnect and went to Stock recovery - "meta tool" remain in waiting state.
4. Holding Power+Volume up: Windows continue making connect and disconnect sounds again and again and the Port under device manager keep coming in and out. Phone boots up as soon as I leave the buttons. "meta Tool" remain in waiting for connection, or sometime move to "getting Kernel Port" and get stuck at it.
5. Holding both volume buttons: do the exact same as point Number 4 above.
6. Holding both volumes+power buttons: do the exact same as point number 4 above.
Definitely, all MTK drivers are installed and working because I can use SP flash tool in conjunction with secBoot utility without any problem. I tried other similar tools like “SN writer” and “read and write tool v1.3” and faced almost same behaviour. It means my device is not going into Meta mode properly with these tools. Please contribute in helping me with your valuable suggestion, as I’m not being able to use this device due to cellular network unavailability.
Click to expand...
Click to collapse
I have this same issue where my device can't get detected by any IMEI writer as itneeds to be in meta mode. Do you have any success on this ?
K!r!to26 said:
I have this same issue where my device can't get detected by any IMEI writer as itneeds to be in meta mode. Do you have any success on this ?
Click to expand...
Click to collapse
I also got the same Issue, But it gives a kernel error, Idk, what error it is, and what's the fix, The Local Tech Repair shop did the restoration, but gave me the mobile without IMEI, so, I am stuck, I am also afraid to re flash the stock rom, because I dont know what the hell they did, Maybe they did some kernel change, or the kernel is the same as the wrong one? Idk, Maybe I would say, Reflash your mobile, and check it.
Having the same-ish issue on redmi note 8 pro. any progress?
Abdullah5490 said:
I did use Maui Meta tool in the past to restore IMEIs on slitely older MTK devices, but My current phone is based on MTK6768 with secure boot, needed the IMEIs to be written after flashing firmware. I can use SP flash tool with "sec boot" utility to flash ROM successfully, But unable to connect to Maui Meta tool. I have Modem meta tool Version 10.2044, after launching the program as an admin, it is doing the following:
1. Clicking "connect" and plugging the cable to phone in turned off state: windows make a hardware connect sound, a new port appear in device manager, followed by a disconnect sound after 1 second, that hardware disappear and phone boot-up in offline charging mode or to the welcome/lock screen. The "meta tool" remain at looking for device connection.
2. Holding the Volume down while plugging the Cable in, do the exact same - "meta Tool" remain in waiting for connection.
3. Holding Volume Up: it connect, then disconnect and went to Stock recovery - "meta tool" remain in waiting state.
4. Holding Power+Volume up: Windows continue making connect and disconnect sounds again and again and the Port under device manager keep coming in and out. Phone boots up as soon as I leave the buttons. "meta Tool" remain in waiting for connection, or sometime move to "getting Kernel Port" and get stuck at it.
5. Holding both volume buttons: do the exact same as point Number 4 above.
6. Holding both volumes+power buttons: do the exact same as point number 4 above.
Definitely, all MTK drivers are installed and working because I can use SP flash tool in conjunction with secBoot utility without any problem. I tried other similar tools like “SN writer” and “read and write tool v1.3” and faced almost same behaviour. It means my device is not going into Meta mode properly with these tools. Please contribute in helping me with your valuable suggestion, as I’m not being able to use this device due to cellular network unavailability.
Click to expand...
Click to collapse
Ok Fixed this Problem: https://forum.xda-developers.com/t/...ote-7-x690-x690b-x690c.4592491/#post-88605287
View this thread, Explained in detail.