TWRP 3.5.2_9 FOR GALAXY J5 (2016)
DISCLAIMER : I AM NOT RESPONSIBLE VOIDING YOUR WARRANTY OR ANY DAMAGE CAUSED TO YOUR DEVICE
FEATURES
-Standard TWRP 3.5.2 features
**-Nano and bash removed for now
-Built with Android 9.0 sources
-Backup/restore/format/mount:
-IMEI 1, IMEI 2, FRP PARTITION, EFS, APNHLOS, RPM, MODEM, HIDDEN, QSEE, QHEE, PERSDATA, USB OTG
-Android 11 compatible
-Encryption
-J510H support dropped due to lack of feedback from users
BUGS/KNOWN ISSUES
-None so far
***Backup and restore info***
Some have reported having issues backing up and restoring beginning with Android 10, where upon restoring, a bootloop/stalled boot up occurs. A root fix flashable zip was referenced as the fix to this.
The official solution to this, per TWRP managerial staff, is when backing up the system partition, use the system image instead of system. Its more reliable and efficient.
INSTALLATION
1. Download TWRP image to your device
2. Reboot to Recovery
3. Install
-a. via TWRP by selecting Install, Install Image, then select the image.-b. via OrangeFox as a normal install.4. Reboot to recovery.
5. Enjoy!
DOWNLOAD
J5XNLTE/J5XLTE
https://twrp.me/samsung/j5xnlte.html
J5XLTECMCC
https://twrp.me/samsung/j5xltecmcc.html
Credits
TWRP Team
Zakaryan2004 for his assistance
Sources
TWRP source: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Device and Kernel trees: https://github.com/teamwin
XDA:DevDB Information
[RECOVERY] TWRP 3.5.2_9 for Galaxy J5 (2016), Tool/Utility for the Samsung Galaxy J5
Contributors
palmbeach05
Version Information
Status: Stable
Current Stable Version: 3.5.2_9
Stable Release Date: 2021-04-19
Created 2019-10-01
Last Updated 2021-04-19
When might it be available?
Awesome! I will install it when available.
shreejalm said:
When might it be available?
Click to expand...
Click to collapse
I'm guessing later on today. I submitted the markdown about 3 hrs ago. Just waiting on word from the twrp team to say its uploaded
Wooow thanks so much!
Thank you so much
nice to see twrp official.
Ota install doesn't work..
Bogdans29 said:
Ota install doesn't work..
Click to expand...
Click to collapse
If i'm not mistaken, i tried coordinating with zakaryan2004 and he said ofox had the same issue. However jens 3.2.3 did have that feature. I have been unable to replicate his success on this or the 2015 version. Best advice, download the rom normally, and update that way until i can track down a patch to implement.
palmbeach05 said:
If i'm not mistaken, i tried coordinating with zakaryan2004 and he said ofox had the same issue. However jens 3.2.3 did have that feature. I have been unable to replicate his success on this or the 2015 version. Best advice, download the rom normally, and update that way until i can track down a patch to implement.
Click to expand...
Click to collapse
You are right...Jenslody i think know solution since he make 3.2.3 that work for ota.. Not a big problem for me at all.. Just want you to know and don't know for others. Thank you for TWRP and for your help.
Bogdans29 said:
You are right...Jenslody i think know solution since he make 3.2.3 that work for ota.. Not a big problem for me at all.. Just want you to know and don't know for others. Thank you for TWRP and for your help.
Click to expand...
Click to collapse
Np. Not sure how much he talks, i'm wrapped up in pre-10 implementations and stuff (or at least trying to get the damn thing to work), but if you can get info on that, i'll push it to both the 2015 and 2016 builds and re-release with that update
Amazing to see official TWRP for our device! Thank you so much!
Sent from my j5xnlte using XDA Labs
palmbeach05 said:
Np. Not sure how much he talks, i'm wrapped up in pre-10 implementations and stuff (or at least trying to get the damn thing to work), but if you can get info on that, i'll push it to both the 2015 and 2016 builds and re-release with that update
Click to expand...
Click to collapse
I will try..
i asked for the issue on the twrp github.maybe they have a hint for fixing
J510H?
TWRP 3.3 has some flashing problems with some zips like the Camera fix for Pie just doesn't replace anything...
NecromancerViper said:
TWRP 3.3 has some flashing problems with some zips like the Camera fix for Pie just doesn't replace anything...
Click to expand...
Click to collapse
provide logs
Have you got any recovery for J510H? The version is not important but to be able to download android P&Q roms only
Bogdans29 said:
provide logs
Click to expand...
Click to collapse
+1
Zaid Koudmani said:
Have you got any recovery for J510H? The version is not important but to be able to download android P&Q roms only
Click to expand...
Click to collapse
I have some free time over the next few days to look into things. Can you tell me if there are any pie roms for the j510h? I'm not sure or can't exactly tell if that is supported?
Related
Hi!
Just wanted to publish here the CR-DROID-ROM for our beloved Xiaomi Redmi 3/Pro.
Note:
I'm only the publisher, not the maintainer of this ROM. While you can post bug-reports here, they cannot be fixed by me.
Description from the dev-site:
This is a free AOSP / CyanogenMod Android based ROM bringing a lot of custom features ported from AOSPA, SlimRoms, OmniRom and many others great roms out there
crDroid brings what Android have of most advanced in terms of customization and stability.
Click to expand...
Click to collapse
The dev-site at Google+:
https://plus.google.com/communities/118297646046960923906
LINKS:
DOWNLOAD-LINK for crDroid with standard-kernel (hosted at Mega.nz)
DOWNLOAD-LINK for crDroid with DT2W-kernel (hosted at Mega.nz)
WHOLE DOWNLOAD-FOLDER (with older versions)
New Revision is out:
Xiaomi Redmi 3/Pro ROM CR-Droid 7.1.2 V3.8.3 Official-Build 2017-11-25
Just flash with with any version of Open-Gapps 7.1 (ARM64) (I recommend to use "Pico") and Magisk.zip. Don't forget to install the app "Magisk-Manager"!
Credits go out to Bondstas (UA) for generating this ROM.
P.S.:
The thread will be updated from time to time if I notice, that a new version of CR-Droid is out.
Update-history:
15-08/2017: CR-Droid V3.7 from 15-08/2017 is out!
25-08/2017: CR-Droid V3.7 from 15-08/2017 with DT2W-kernel added!
11-10/2017: CR-Droid V3.7 from 09-10/2017 is out!
14-10/2017: CR-Droid V3.7 from 09-10/2017 with DT2W-kernel added!
18-11/2017: CR-Droid V3.8.2 from 01-11/2017 is out!
31-01/2018: CR-Droid V3.8.3 from 25-11/2017 released!
01-02/2017: CR-Droid V3.8.3 from 25-11/2017 with DT2W-kernel added!
Thanks a lot!
Another ROM for our Redmi3!
crDroid V3.7 from 15-08/2017 is released! - Download see 1st post!
Is this the same with bondstas build ?
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
No, I think it's the one from Winkarbik.
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
frankonia said:
No, I think it's the one from Winkarbik.
Click to expand...
Click to collapse
but, the rom size is the same
Ok, then you are probably right. I have it from 4PDA.
ABDZR_43 said:
but, the rom size is the same
Click to expand...
Click to collapse
The best way is by calculating md5 checksum of zips.
Sent from my Redmi Note 4 using XDA Labs
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
You must have a focaltech panel. https://forum.xda-developers.com/showpost.php?p=68344933&postcount=493
3.6 https://mega.nz/#!35AVQKRR!M5b72YaeK9vv0JMs0x-iZupP93KVKofP8095JJ3GL2A
3.7 https://mega.nz/#!vlpUAbCY!yWF15BcwyKVGB1X4TxF3bWoZPiXNRFbKIHWn6zNxNI4
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
I took a look in the "About"-menue: Under "Kernel-version" stands "3.10.107-lineageos.... winkarbik@ubuntusrv #1"
So this ROM is from WinKarbik.
double-post => deleted!
tripper22 said:
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
Click to expand...
Click to collapse
I inserted the DT2W-kernel to the main ROM-file. Download-link in the first post!
This ROM has problem with Xposed making phone unbootable.
I tried two other ROMs (Lineage and AICP) which don't have the problem.
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
JOLLYNERY said:
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
Click to expand...
Click to collapse
Excuse me in advance for going OT but before trying to install custom roms, have you tried to flash global version of MIUI that is bundled with most of world languages and can fit your needs: it has got working google play, not a single china app and is working fairly well in all parts. It can be easily flashed on locked bootloader as well using miflash tool, a windows 64 bit system and putting the phone in download mode.
You can find most of informations here http://en.miui.com/thread-228048-1-1.html
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
JOLLYNERY said:
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
Click to expand...
Click to collapse
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
ivanhoe1976 said:
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
Click to expand...
Click to collapse
lemme try it out bro, thanks alot.
JOLLYNERY said:
lemme try it out bro, thanks alot.
Click to expand...
Click to collapse
Guys it didn't work out for. I tried updating through updater but it didn't. Then through pc, it didn't respond. Says I am not allowed to update to any other ROM that is, not a STABLE.
I would b grateful if u assist.
Thanx
ivanhoe1976 said:
if you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in twrp (immediately after you flash twrp i mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: This will patch boot.img and you will have a "permanent" twrp that won't go away at first system restart. Now you can install supersu or any custom rom you want to try without any problem! Now, after much time on miui 8, i'm on los 14.1, but i've tried many other custom roms, each of one was stable and good for daily use except aex which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. Cr-droid is very good as well!
Click to expand...
Click to collapse
it didnt work out. It requested i can only update with stable rom. Because i tried updating with global dev rom . I might just trash this fone
This LineageOS 14.1 ROM is built from source for Blu R1 HD.
Some features of this LineageOS 14 rom are:
- Hardware rendered LiveDisplay (no UI lag in night mode)
- Android security patches up to October
- Security hardened kernel (including BlueBorne bluetooth patches)
- Kernel patched for Nougat (Nougat compatible SELinux)
- No Chinese spyware
Credits:
zhaofengli (major thanks for getting the rom booting + hotspot/GPS fix, among other things!)
vampirefo
danielhk (GPS fix)
DeckerSu(Initial device tree, MTK patches)
Sources:
Code:
[URL=https://github.com/blumonks/android_device_blu_p6601]Device Tree[/URL]
[URL=https://github.com/blumonks/android_kernel_mediatek_mt6735]Kernel Source[/URL]
[URL=https://github.com/blumonks/android_p6601]Build Manifest[/URL]
[URL=https://github.com/blumonks/twrp_device_blu_p6601]Recovery device tree[/URL]
Downloads:
LineageOS 14.X Downloads
TWRP Recovery
Click to expand...
Click to collapse
Installation Guide:
1) Flash TWRP recovery (See downloads)
Code:
fastboot flash twrp-3.1.1-0-p6601.img
This TWRP recovery has a different device name than previous versions of TWRP.
2) Boot into recovery (Hold vol up when booting and use vol keys to select recovery)
3) If coming from a non lineageOS rom, please format system, data, and cache in recovery before flashing this rom. Otherwise stale files from previous roms may cause bugs.
5) Flash lineage rom
6) Flash gapps (obtain here: http://opengapps.org/)
Current bugs:
Camera does not work. It is still under active research and development.
Bluetooth
Github Issue Tracker (Please do not open duplicate issues)
Please note that support will be limited.
UPDATED BUILD 24 AUG 2020.
If anyone is still using this device, here is an updated build with the August 2020 Android Security Bulletin & all merged LineageOS changes since October 2017. MAKE SURE YOU FLASH USING THE TWRP IN THE ORIGINAL POST! You can flash over any builds in this thread, the camera still doesn't work and I have no interest in fixing it.
https://www.mediafire.com/file/dbdmk...p6601.zip/file
https://gofile.io/d/vTddMJ
Vulnerability said:
Nice! Can't wait to test it! Any screenshots?
Click to expand...
Click to collapse
It's the same as any other lineage rom. Updated OP.
How well does Bluetooth Audio work? Does it make you sound like a Chipmunk?
Is enforcing SELinux supported? Or only permissive?
EDIT: Don't worry I saw the issue tracker post
I'm gonna try this rom
It's nice to see development alive!!!
Hope you could a finally fix the broken camera
Does anyone know anything about the KRACK vulnerability?
zombie_ryushu said:
How well does Bluetooth Audio work? Does it make you sound like a Chipmunk?
Click to expand...
Click to collapse
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
zombie_ryushu said:
Does anyone know anything about the KRACK vulnerability?
Click to expand...
Click to collapse
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
jianC said:
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
Click to expand...
Click to collapse
Thanks for the updated version.
Urg, but I just finished downloading the original release
jianC said:
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
Click to expand...
Click to collapse
Does this fix also apply to the LineageOS 13.x Rom? I need the Front facing camera working, and that works under Marshmellow and not Nougat.
Just wanted to thank you for your hard work and dedication on this ROM project and wish you good luck with the camera as well.
Not that I find the camera on the R1 HD all that useful as it takes pretty lame photos, but the lack of camera is basically the only thing keeping me from ditching Blu software altogether.
I really hope you manage to get a 100% operational LineageOS for the R1 HD.
Yesterday I called Amazon and complained about the software that collected our personal information and data and submitted it to Blu headquarters in China. They said that I could return the phone for a full refund so at this point I am seriously contemplating doing that. The only problem is that I don't have a backup phone.
The lack of resources from MTK based processors is such a deal breaker. I was not aware it would be so difficult to get development going for it when I bought my phone last year.
Now I'm contemplating getting an used phone with better development support after I return my R1 HD.
I really wanted to wait until OnePlus released their new device with a better display and hopefully a near bezel less display and at least IP67 water resistance. That's the reason why I didn't go for the OP5. The upside-down screen was also another one.
If you could get the camera working in LOS than I'd hold on to my R1 HD for a a while longer. But I'm not keeping my hopes up... Just being realistic. Haha!
Thanks again!
Thanks for your support!
As of now, I've been studying the leaked MTK camera sources for other devices and using IDA to see what extra symbols and logic the stock libcameraservice.so and libcamera_client.so has. It appears that replacing these two libs was the key to fixing camera in cm-13 ports.
Thank you!
Oh, I didn't know camera support was fixed for CM 13 on the R1 HD. Maybe I didn't see it here. But I'd much rather have a non Blu version of Android with all security patches even if it's just on marshmallow.
Three days ago I just realized that Blu had a frigging app collecting my personal data and sending it back to China.
It had sent over 5.9MB of data since July 21st. I think it's a lot of data for text only transmissions.
Anyhow, I've been seeing people using Footej on other ROMs in which they could not get the camera working with stock camera app. Is that what you mean by getting the camera to work?
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
khyr said:
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
Click to expand...
Click to collapse
Dang! That's old! I guess devs should be more organized in doing a walk through with links to the files and recoveries needed to flash their awesome work.
Here's mine that I've just uploaded to zippy. I think it's the latest available and should be compatible with all ROMs.
Please report back with your findings and opinions on the ROM.
Please try to use both SIM cards to see if they work okay.
http://www8.zippyshare.com/d/p4HMiDRq/41954/R1_Port_3.1-TWRP.img
khyr said:
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
Click to expand...
Click to collapse
Which version of the ROM is installed on it now? Modified or stock? Which recovery is on the phone? Stock or TWRP?
I can't post pictures but it gives me an error saying that the package is for p6601 and the updated twrp image says device is Life_Max
frosted.efizzle said:
I can't post pictures but it gives me an error saying that the package is for p6601 and the updated twrp image says device is Life_Max
Click to expand...
Click to collapse
Did you download and flash the image I've just shared above?
AndroidBR said:
Did you download and flash the image I've just shared above?
Click to expand...
Click to collapse
Same error
With they recovery You provided above
Thanks for your support!
Download:
https://github.com/JarlPenguin/releases/releases/download/twrp3.3.1-3-cedric/twrp-3.3.1-3-cedric.img
Known issues:
Encrypted backups don't work
You tell me
Special thanks to:
@squid2 and @Akipe for their hard work on the montana & msm8937-common device tree
OmniROM and TWRP team
All other open source devs/teams I may have missed!
Sources:
Device Tree:
https://github.com/JarlPenguin/android_device_motorola_cedric-soham/tree/twrp-9.0
Kernel: https://github.com/Sohamlad7/android_kernel_motorola_msm8937/tree/twrp-treble
TWRP (Treble) for the Moto G5 (cedric).
XDA:DevDB Information
Unofficial TeamWin Recovery Project for Moto G5, Tool/Utility for the Moto G5
Contributors
JarlPenguin, Akipe, squid2
Source Code: [url]https://github.com/TeamWin[/URL]
Version Information
Status: Stable
Current Stable Version: 3.3.1-3
Stable Release Date: 2019-07-28
Created 2019-07-28
Last Updated 2019-07-28
Is this version of treble recovery allows us to flash Android Q treble version without any problems or not ?
basem bebarse said:
Is this version of treble recovery allows us to flash Android Q treble version without any problems or not ?
Click to expand...
Click to collapse
I haven't tested it. It should work fine
These are the commits I made for encryption on the official twrp
I haven't gone through your source in detail but you may find it useful for comparison of files
Github TWRP Encryption Commits
TheFixItMan said:
These are the commits I made for encryption on the official twrp
I haven't gone through your source in detail but you may find it useful for comparison of files
Github TWRP Encryption Commits
Click to expand...
Click to collapse
Yes, this TWRP is based off of squid2's trees (will fix history soon) with Nougat arm64 crypto blobs
one small question: is this the version for future LOS 16 builds? for 64bit builds?
kare_meesner said:
one small question: is this the version for future LOS 16 builds? for 64bit builds?
Click to expand...
Click to collapse
It's for both 32 and 64 bit builds.
what trebel rom we can install ?
If you try please share
Does this also work in Stock Rom?
TheBlob11 said:
Does this also work in Stock Rom?
Click to expand...
Click to collapse
This is a recovery image so you can flash it regardless of what rom you are using (you can flash 32 or 64bit roms with it)
However as you are on stock rom I would recommend sticking with my official twrp recovery especially if you use encryption due to encryption bug in this recovery
I wanted to use this to Switch to a 64bit Rom Rom for the first time. I have always been afraid, because i wouldn't be able to restore my stock backup. Would this be possible With this Recovery?
TheBlob11 said:
I wanted to use this to Switch to a 64bit Rom Rom for the first time. I have always been afraid, because i wouldn't be able to restore my stock backup. Would this be possible With this Recovery?
Click to expand...
Click to collapse
If you want to restore stock flash stock firmware via fastboot and then restore your backup using the twrp which created the backup
You can probably just restore the backup using the twrp that created it without flashing stock firmware first but just in case the custom rom alters anything that isn't restored with the backup
Make sure you backup efs partition just in case of a loss of imei
TheBlob11 said:
Does this also work in Stock Rom?
Click to expand...
Click to collapse
you need to unlock your bootloader and flash this TWRP for treble to work. i believe you then need to flash a rom which supports treble before you can flash your desired GSI
walidham said:
what trebel rom we can install ?
Click to expand...
Click to collapse
You need to install a treble-enabled ROM. Currently it seems like there are none on XDA.
@JarlPenguin It's cool to have an updated TWRP for 64 bit but please fix encryption.
Sent from my cedric using XDA Labs
nift4 said:
@JarlPenguin It's cool to have an updated TWRP for 64 bit but please fix encryption.
Sent from my cedric using XDA Labs
Click to expand...
Click to collapse
Encryption doesn't work on which ROMs?
No idea, I only read the OP + Thread history. The OP says that backup with encryption does not work and the thread history has no fixed or somewhat.
Sent from my cedric using XDA Labs
P.S.: This isn't meant as a "INSTANTLY DO THAT I WANT IT!", I can try to help but I have zero experience at Android internals (and Android recoverys).
I have currently no encryption, is it save to use it for backups?
@JarlPenguin ?
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 10.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 10.0 DBT XXU3BTK1 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v4.0
Rebased to XXU3BTK1 Android 10.0 (Security Patch from 01.11.2020)
Hopefully Fixxed Bluetooth-Probleme - Should work witout BT Patcher.
Changelog v3.1
Fixxed bluetooth-probs
Patching of bluetooth didnt work anymore, so you have to use now Bluetooth Library Patcher as Magisk Modul, otherwise you lose every reboot your bluetooth connections
Changelog v3.0
Rebased to XXU3BTH4 Android 10.0 (Security Patch from 01.09.2020)
Changelog v2.0
Rebased to XXU3BTFN Android 10.0 (Security Patch from 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Changelog v1.0
Initial Release
Rebased to XXS3ATE3 Android 9.0 (Security Patch from 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself
Alternatively i can provide the patched TWRP see latest twrp file above
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Q 10.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Troubeshooting
If you got an bootloop or it stays on samsung logo, make a fullwipe. Otherwis it wont boot correctly into root partition.
I had the same problems. Only a fullwipe solved it.
Credits
Samsung
topjohnwu
MrWaehere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 10.x Q
Version Information
Status: Stable
Current Stable Version: 30.08.2020
Created 2020-06-01
Last Updated 2020-09-29
hanspampel said:
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 9.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 9.0 DBT XXS3ATE3 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v1.0
Initial Release
Rebased auf XXS3ATE3 Android 9.0 (Security Patch vom 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself, alternatively I can provide the patched TWRP.
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Pie 9.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Credits
Samsung
topjohnwu
MrWhaere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Current Stable Version: 01.06.2020
Created 2020-06-01
Last Updated 2020-06-01
Click to expand...
Click to collapse
MOD EDIT : No need to quote the ENTIRE first post ...
Does this rom lag or feel sluggish to you?
Sent from my SM-T510 using Tapatalk
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
klemen241 said:
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
Click to expand...
Click to collapse
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
zfk110 said:
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
Click to expand...
Click to collapse
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
klemen241 said:
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
Click to expand...
Click to collapse
What about if you play games? like Pokémon go will it runs hot??
zfk110 said:
What about if you play games? like Pokémon go will it runs hot??
Click to expand...
Click to collapse
I only use it for Netflix, so no idea. I think it's safe
hanspampel said:
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
Click to expand...
Click to collapse
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
zfk110 said:
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
Click to expand...
Click to collapse
no.. safetynet now does hardware checks
Update to Q-based BTFN FW.
Changelog v2.0
Rebased auf XXU3BTFN Android 10.0 (Security Patch vom 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Read Troubleshooting in OP!
Thanks for the update.
I am currently using your v1.0 (Android 9).
To update to v2.0 (Android 10) i have to flash stock rom XXU3BTFN first and repeat the procedure to patch TWRP, flash TWRP, flash multidisabler ...?
does the rom work with the T510N version also?
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
hanspampel said:
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
Click to expand...
Click to collapse
from what i have read it has 3GB instead of 2GB ram and 64GB instead of 32GB storage.
I think the rest of the internal components are the same.
It is the wifi(T510/T510N) version and not the LTE(T515/T515N)
Hmm try it out if you want. I don't guarantee it will work. If so, it could be that it show not the correct Infos about your tab, ram, emmc etc.
@seppfx
You can push the twrp inside the AP_ file, delete recovery.img and rename twrp to this one. So you don't have to format Data again.
I'm on Android 10. And as you know that TWRP version is T510XXS3ATE3 and TWRP is still not available for T510XXU3BTFN So how am I suppose to do all these stuffs. Can I flash your file through TWRP on Android 9 ?
Please clear my doubts.
No, you must be on android 10, as i said before. Flash Magendanz TWRP. There is a q twrp in his thread.
Can you please post a link of that TWRP ? I'm unable to find that.
Take a look at here.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my build for the A310, A510, and A710,
most problems are already solved.
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Wifi
USB
Video playback (HW/SW)
Tethering via USB
OTA-Updates
RIL
Mobile data
GPS
DRM
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Sensors
Audio server is crashing in a phone call for a5 and a7
Date usage because of missing eBPF
Spoiler: Links
TWRP a3xelte
TWRP a5xelte
TWRP a7xelte
ROM
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions (for S3, simply use the files for your device)
XDA:DevDB Information
[ROM][13.x][a3xelte a5xelte a7xelte][ALPHA] LineageOS 20, ROM for the Samsung Galaxy A3, A5 and A7 ( A310, A510, and A710)
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Thanks
danwood76 for the great work for these devices
The LineageOS team
And all others who have contributed to the Exynos projects past and present
Version Information
Status: Alpha
Created 2022-11-30
Last Updated 2022-11-30
I need testers to fix the sensors, please write me a PM.
I can't wait to try it on the A3 2016 phone, which I put on the shelf after buying a new phone. When will the HTML video come to the YouTube channel
yoooo great work!!!!!
i compiled TWRP 3.7.0-11.0 for A310F, anybody wanna test? it's still in a testing stage
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating. Flashed IMG file too recovery partition. Then tried to reboot into recovery.
From that point I only see Samsung logo boot screen. Any long press button combo just vibrates and reboots that screen.
Any idea to debrick?
kurtn said:
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating. Flashed IMG file too recovery partition. Then tried to reboot into recovery.
Click to expand...
Click to collapse
notnoelchannel said:
yoooo great work!!!!!
i compiled TWRP 3.7.0-11.0 for A310F, anybody wanna test? it's still in a testing stage
Click to expand...
Click to collapse
Did you try this one?
It should work to get into the download mode, try to press the button combination as long as needed,
it also could help to attach the usb charger to switch it off..
Then unplug it and give it another try to boot into the download mode and reflash a working TWRP.
html6405 said:
Did you try this one?
Click to expand...
Click to collapse
i didn't upload the twrp 3.7.0-11.0 anywhere, it's a private build. needs some fixes
kurtn said:
Tried to upgrade a3 from 19 to 20. But stuck in twrp updating.
Click to expand...
Click to collapse
can you attempt a clean install? if not, please try.
kurtn said:
Flashed IMG file too recovery partition. Then tried to reboot into recovery.
From that point I only see Samsung logo boot screen. Any long press button combo just vibrates and reboots that screen.
Click to expand...
Click to collapse
what recovery did you flash after twrp? LOS 20.0 recovery? if did, please reflash twrp 3.6.2 and attempt a clean install
notnoelchannel said:
i didn't upload the twrp 3.7.0-11.0 anywhere, it's a private build. needs some fixes
can you attempt a clean install? if not, please try.
what recovery did you flash after twrp? LOS 20.0 recovery? if did, please reflash twrp 3.6.2 and attempt a clean install
Click to expand...
Click to collapse
I cant do anything. I wait now for the battery to drain to shutdown.
I tried to install OP linked
Samsung Galaxy A3 2016 (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
kurtn said:
I cant do anything. I wait now for the battery to drain to shutdown.
I tried to install OP linked
Samsung Galaxy A3 2016 (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Click to expand...
Click to collapse
Use vol down+home+power to force reboot, then try to install twrp 3.5.2
notnoelchannel said:
Use vol down+home+power to force reboot, then try to install twrp 3.5.2
Click to expand...
Click to collapse
Thank you. I made the mistake of releasing power button as soon as screen went dark.
So. Dirty upgrade worked. Signature spoofing not yet.
What sensors are to test?
Edit: all Sensors I tested work. Signature spoofing is only for system apps. Minmicrog CLI works.
How's performance? There's no way Android 13 is actually usable. How bad is performance with gapps?? This ****'s insane, once audio works I'll give this a shot. Keep up the good work!
HeladeraDragon said:
How's performance? There's no way Android 13 is actually usable. How bad is performance with gapps?? This ****'s insane, once audio works I'll give this a shot. Keep up the good work!
Click to expand...
Click to collapse
performance is the same like on android 12, i didn't test with gapps
Is it usable?
kurtn said:
So. Dirty upgrade worked. Signature spoofing not yet.
What sensors are to test?
Edit: all Sensors I tested work. Signature spoofing is only for system apps. Minmicrog CLI works.
Click to expand...
Click to collapse
Really? That's great, which version did you test?
The one in the main download folder or the one in the test folder?
Could someone test the a7 builds and report?
I've also created two builds, one with maybe not working sensors and another one in the test folder.
html6405 said:
Really? That's great, which version did you test?
The one in the main download folder or the one in the test folder?
Could someone test the a7 builds and report?
I've also created two builds, one with maybe not working sensors and another one in the test folder.
Click to expand...
Click to collapse
Normal build. It was like a week old when I installed it.
kurtn said:
Normal build. It was like a week old when I installed it.
Click to expand...
Click to collapse
Ok that's good to know,
could you also test the other build?
It could be that you will face a bootloop but idk.
But if you confirm that the normal build has working sensors, I'm already happy.
html6405 said:
Ok that's good to know,
could you also test the other build?
It could be that you will face a bootloop but idk.
But if you confirm that the normal build has working sensors, I'm already happy.
Click to expand...
Click to collapse
So they have identical file names? Only the test build is a few kilobytes larger.
No boot loop. Just stuck in boot animation for 10 minutes now. (Dirty flashed test over normal 20.0)
TheRain12 said:
I can't wait to try it on the A3 2016 phone, which I put on the shelf after buying a new phone. When will the HTML video come to the YouTube channel
Click to expand...
Click to collapse
Just tested: installation works without YouTube as well. Maybe better
kurtn said:
No boot loop. Just stuck in boot animation for 10 minutes now. (Dirty flashed test over normal 20.0)
Click to expand...
Click to collapse
Thanks, that's what I feared, but if you can confirm again, that really all sensors are working with the other build,
I'm happy.