I broke my moto z display back in 2017 and i recently got it repaired.
My device was rooted , and had nexus rom on it
So after i got it repaired i updated the twrp and tried to flash a couple of roms
After the flash every rom i have flashed is stuck in bootloop
so i went back to the service center and got back to stock os ( OREO ) !
Once its all done ! my device wont boot , instead show a NO COMMAND screen .:crying:
It only boots if i boot to bootloader and from there i select the START option
The second thing is that my device codename shows SHERIDAN in bootloader and grffin in few apps i used !
And can i root my device on oreo ! and if possible please guide me i as i could not find any reliable source !
whiteTee said:
I broke my moto z display back in 2017 and i recently got it repaired.
My device was rooted , and had nexus rom on it
So after i got it repaired i updated the twrp and tried to flash a couple of roms
After the flash every rom i have flashed is stuck in bootloop
so i went back to the service center and got back to stock os ( OREO ) !
Once its all done ! my device wont boot , instead show a NO COMMAND screen .:crying:
It only boots if i boot to bootloader and from there i select the START option
The second thing is that my device codename shows SHERIDAN in bootloader and grffin in few apps i used !
And can i root my device on oreo ! and if possible please guide me i as i could not find any reliable source !
Click to expand...
Click to collapse
Download the two files here https://forum.xda-developers.com/moto-z/development/stock-moto-z-8-0-firmware-t3805226 put in the same folder an run the bat retail_AS_800.bat
mosfet321 said:
Download the two files here https://forum.xda-developers.com/moto-z/development/stock-moto-z-8-0-firmware-t3805226 put in the same folder an run the bat retail_AS_800.bat
Click to expand...
Click to collapse
Thank you it worked for me but i had to use cmds
Related
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hi , I need your help in recovering my device , I plan to flash cyanogenmod 12 lollipop on my padfone s , but after I installed that update , My phone went into a bootloop . Its when you start your device , you see a welcome text like "ASUS in search of incredible ,powered by android". The I tried to flash stock recovery using adb , everything works fine , I can install my firmware using recovery from sdcard . But , I am still facing the same problem as before , It went into a boot loop and there is a error on top of the screen saying "ERROR:CAN NOT LOAD INVALID BOOT IMAGE!!" . I tried formatting , clearing cache , everything . I need help .
MeIsNoob said:
Hi , I need your help in recovering my device , I plan to flash cyanogenmod 12 lollipop on my padfone s , but after I installed that update , My phone went into a bootloop . Its when you start your device , you see a welcome text like "ASUS in search of incredible ,powered by android". The I tried to flash stock recovery using adb , everything works fine , I can install my firmware using recovery from sdcard . But , I am still facing the same problem as before , It went into a boot loop and there is a error on top of the screen saying "ERROR:CAN NOT LOAD INVALID BOOT IMAGE!!" . I tried formatting , clearing cache , everything . I need help .
Click to expand...
Click to collapse
It sounds like you did not unlock the BL first. flash cwm6 and boot to it then flash the blunlock zip.
i am facing the same error , but worse.. i can't access fastboot and no custom recovery installed !! Is there any thing i can do but throwing my 1 days old phone in the garbage..
I accidently wiped all data + system and everything using TWRP and now i can only go into TWRP recovery. I tried to flash stock rom using TWRP and it says successful, but when i press reboot system it says "No OS installed" . My device is Sony Xperia Z3 D6603. . My previous android version was Lollipop 5.1.1 23.4.A.1.232 and now i'm trying to run this one http://forum.xda-developers.com/z3/development/rom-slimm-t3359907 is this the problem ?
I DID the same thing on my htc one m9!!! I have no idea what to do. How do you know if your phone is bricked???
kothieno said:
I DID the same thing on my htc one m9!!! I have no idea what to do. How do you know if your phone is bricked???
Click to expand...
Click to collapse
I'm not an expert, but i think if it's bricked it should not even power on. I hope someone with great experience reply to my thread fast because i want my Z3 up and running ASAP :crying:
I fixed it !!! yey
I finally fixed my phone with a few simple steps:
1. I downloaded "Androxyde XPERIA Flashtool" and re-locked my bootloader. http://xperiafirmware.com/
2. Downloaded sony pc companion
3. I clicked on Repair Software and waited for about 20-30 minutes
And that's it ! My phone is like new. I hope this helped for people with the same or similar problem
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
I had the same problem , and I fixed it.
When you install the TWRP for some reason the data partition get corrupted to resolve this you need to do the following :
---- before you do any thing capture the following information and keep it ----
IMEI , Barcode, Modem Version, Bluetooth MAC , WIFI MAC address
IMEI, barcode and Modem Version details can be found in the factory mode:
- switch your phone off
- Press power button and volume down -- you will boot into factory mode
- from the menu select version ( scroll using volume down button ) click power button
you should see BB chip details, MS Board, etc
note down the following into a paper or to your computer and keep it ( in my case it was useful when I changed the rom)
1- IMEI numbers
2- Modem Version ( Baseband version)
3- barcode number ( I found this info only in this menu)
for the (Bluetooth and WIFI) MAC address you need to boot into your phone and go to settings , scroll down to About phone ( in my case I need to click to More) , then click on Status
you will found ( also you can found the IMEI information it should match what you capture above)
1- Bluetooth MAC address
2- WIFI MAC address
now you have everything you need to format your mobile in case that was needed.
---- Note the following steps will wipe your contacts and reset the phone settings, data on your SD card should not be effected -------------
To root your mobile do the following:
1- install TWRP using SP_Flash
2- copy SuperSU to your SD card
3- reboot to recovery (into TWRP)
if you install SuperSU, now you should notice that it didn't complete and there are some errors for that you need to fix the data partition before install SuperSU
4- click wipe, click Advanced Wipe
5 - select Data and Click on "Repair or Change File System"
if its corrupted the size should be 0 to fix it continue step 6
6- Click change File system and change it to EXT4
7- Wipe to Change it should format the partition for you
when complete check the size of the partition is not 0
if its still 0 " Click Repair File System" in menu of step 5
now you are ready to install SuperSU
Lava iris r1s
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Rooting or TWRP for LAVA R1s
Please help me to root Lava R1s model .. tried with kingoroot and other once click root apps all failed .. kindly give working link for TWRP recovery for LAVA R1s , not able to find in the internet.
Lava r1 s, add stock rom
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
Custom rom required for lava r1s non camera
vsingh1611 said:
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Click to expand...
Click to collapse
HELLO TEAM,
PLEASE SEND ME THE CUSTOM ROM FOR LAVA R1s+ NON CAMERA ANDROID PHONE. AND ALSO PLEASE TELL ME THE STEPS HOW TO FLASH THE CUSTOM ROM. FROM THE ABOVE I JUST SEE THE STEPS TO INSTALL THE ROM,BUT NO ONE HAS SEND THE PROPER CUSTOM ROM LINK FOR LAVA R1s NON CAMERA PHONE. KINDLY REPLY FOR THE SAME.
software update error lava r1s
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
Please tell me how to troubleshoot my software update error in my LAVA R1s non camera Android phone. The software update notification keeps on popping up. And when I click on the notification update then I get the following error saying " Not enough memory. Update needs atleast (109.82mb)". I even have hard resetted the phone but I still get the same update error later on once it gets completely resetted. As soon as it gets connected to internet data connectivity I get the pop ups for software update. How do I get rid of the same.
root lava r1
Hello...
U can try magisk manager method.
It is worked in my lava r1 2gb ram device.
Take patched boot file from magisk manager and flash it via sp flash tool.
coolmanrakesh said:
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Click to expand...
Click to collapse
I have build ressurection remix nougat. You can try it.
https://forum.xda-developers.com/android/development/lava-r1s-camera-gps-ressurection-remix-t4145507
Hello dear community. Have been here for quite a while and now I've got a big problem with my Moto Z.
Today out of nowhere, precisely I went to get something to drink from the other room and came back, my Moto Z died.
It was at the Splashscreen stuck. So I tried to do some things already ..
So tried to boot into TWRP or flash it through fastboot > Didn't worked. Stuck on Splashscreen.
Tried to flash Stock 7.1 > Didn't worked .. Bootloader write ends with "FAILED".
Tried to format all partitions ; + Userdata too > Didn't worked .. That made it boot instantly into the Bootloader.
So now I'm here and don't know what to do.. Hope any of you can help me somehow.
I just don't want to throw my phone away with my 2 mods ^-^' ..
Ah.. and No I don't have any waranty left ..
Tried pretty much till now but it after all it just doesn't boots after the "Your devices has been unlocked screen" . No matter if custom rom or stock rom .. Anyone out there to help maybe ?
https://forum.xda-developers.com/showpost.php?p=76287794&postcount=366
Maybe It can help you?
Stock Oreo ROM..
Hi dears friend.i have one question about bootloader. I'm tried close bootloader. And i get it.but with mistake.and i cant open secondary bootloader how i can open it against? Have mistake invalid boot state on pc..thanks for everyone.