Has anyone tried Ainur Sauron or Narsil on the Mi A3? I'm considering trying it, but I'd like to avoid messing the phone up just yet. Magisk user, btw
Makishima said:
Has anyone tried Ainur Sauron or Narsil on the Mi A3? I'm considering trying it, but I'd like to avoid messing the phone up just yet. Magisk user, btw
Click to expand...
Click to collapse
You won't mess up the phone by trying it.
If you flash mm for recovery in magisk you can boot to twrp and disable the module and just reboot if any magisk module puts you in a boot loop.
That's the beauty of magisk and its systemless mods.
garylawwd said:
You won't mess up the phone by trying it.
If you flash mm for recovery in magisk you can boot to twrp and disable the module and just reboot if any magisk module puts you in a boot loop.
That's the beauty of magisk and its systemless mods.
Click to expand...
Click to collapse
Well, I thought it might change something that won't revert to stock after uninstalling the mod... but, yeah, you're right, it's systemless through Magisk. Sometimes the dev suggests installing through TWRP instead of Magisk if something doesn't work, though. In that case it wouldn't be so simple.
Will try through Magisk and see.
Related
I tested it and this works:
Bought N950F DS.
Instaled TWRP as in this guide:
https://forum.xda-developers.com/showpost.php?p=73817280&postcount=3
Part 3 - Magisk.
I did not flash custom rom, i wanted to stay on stock. (no system format)
Flashed Magisk 14.5
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Boot into system, configure in Magisk
install xposed (api 25),
finally you will have after few reboots xposed v89.
(Install some modules, but remember to backup in TWRP before every module installation.
For me, some of them caused TouchWiz to not show on start, had to do few reboots (bixby + power + volume down long press).
For example do not install firefdskit.
GravityBox is working fine for me now.
Also Kmod for whatsapp.)
In this state Android Pay wont work.
To get it working there is currently only one option i know:
Install this:
RootSwitch 1-3-3-16
https://www.asus.com/zentalk/tw/for...5MjEyfDVlYzZhYzljfDE1MTM3NDk3NzN8MHwxNzM1NDI=
After installing DO NOT TOUCH TOP ROOT SECTION.
Only use xposed section:
Switch xposed to off, soft reboot, install Android Pay, add card.
Whenever you need to pay in shop you have to do it (turn xposed off), later you can switch on, soft reboot and use modules.
Waiting for better way....but everyone says that Android Pay will never work with xposed so this is currently only option for me since phone without xposed is unusable.
You can also just install Xposed with magisk, and then you can enable/disable the xposed module whenever you need safetynet
Interceptor777 said:
You can also just install Xposed with magisk, and then you can enable/disable the xposed module whenever you need safetynet
Click to expand...
Click to collapse
in xposed settings?
I did that but SN wont allow for that, fail.
xtam said:
in xposed settings?
I did that but SN wont allow for that, fail.
Click to expand...
Click to collapse
No, you disable the Xposed module in magisk. That basically.uninstalls Xposed on next boot. And you can re-enable it.
Interceptor777 said:
You can also just install Xposed with magisk, and then you can enable/disable the xposed module whenever you need safetynet
Click to expand...
Click to collapse
Interceptor777 said:
No, you disable the Xposed module in magisk. That basically.uninstalls Xposed on next boot. And you can re-enable it.
Click to expand...
Click to collapse
no, in magisk 14.5 i have few modules installed, but there is no xposed, when i was installing xposed magisk told me to download xpsed apk installer, so xposed is separated, not as uncheckable module.
Hi all?
Can someone confirm that we can be on stock rom while using magisk and twrp?
I mean replace stock recvery by twrp, root with magisk and continue to use stock rom instead of flashing custom rom.
I m on iron man rom (custom) wich is very nice. I want to try the lastest samsug rom (lastest firmware BQKG) with twrp, magisk and xposed?
Do you think it s possible without any issue like popup error windows or other problems?
Thank for your help
What cpu?
Does this work for snapdragon orrr...?
@RyleyDyck
RyleyDyck said:
Does this work for snapdragon orrr...?
Click to expand...
Click to collapse
Depends.
Definitely check the Snapdragon root section and check your Bootloader version, how to is described in the SamFail thread.
@jkr192
jkr192 said:
Hi all?
Can someone confirm that we can be on stock rom while using magisk and twrp?
I mean replace stock recvery by twrp, root with magisk and continue to use stock rom instead of flashing custom rom.
I m on iron man rom (custom) wich is very nice. I want to try the lastest samsug rom (lastest firmware BQKG) with twrp, magisk and xposed?
Do you think it s possible without any issue like popup error windows or other problems?
Thank for your help
Click to expand...
Click to collapse
You could, yes. There's no rule to must have a custom rom in order to use Magisk/ have root. Just be sure to check the "How-To root" thread for simple instructions.
@xtam
xtam said:
no, in magisk 14.5 i have few modules installed, but there is no xposed, when i was installing xposed magisk told me to download xpsed apk installer, so xposed is separated, not as uncheckable module.
Click to expand...
Click to collapse
Not sure how that is, but you installed Magisk first and then Xposed with Magisk.
It's by that definition a Module of Magisk, which you can just disable inside Magisk regardless what Xposed's actual status is (ON or OFF).
No need to worry, just toggle it OFF inside Magisk. Your Xposed apps may FC, but that's the tradeoff for being able to use SafetyNet at will.
My phone XZ1 boots fine after installed Magisk Xposed module by rovo89 but caused bootloops after second reboot. I had to uninstall Magisk in order to get it boot again.
My firmware is 47.1.A.12.270 with custom kernel by Ajmal Safi. Xposed and Magisk just updated in this month but I don't want to try install it again. I don't want to re-install all modules from Magisk and re-setup some stuff again
I want to hear if anyone are using or have tried systemless Xposed on XZ1. if so, is it working fine?
I rooted my phone this morning and flashed xposed on magisk right after. Also flashed the Google sans font module and the cloudfare module. And then I rebooted the device. But it has been stuck on the boot screen for almost an hour.
Does any one know what could have caused this? Any notable fixes?
Not all magisk modules and xposed are compatible. Flash stock firmware
Most probably its the xposed, there is no way right now to use XPOSED on miui based on 8.1 oreo.
zaydenQ said:
I rooted my phone this morning and flashed xposed on magisk right after. Also flashed the Google sans font module and the cloudfare module. And then I rebooted the device. But it has been stuck on the boot screen for almost an hour.
Does any one know what could have caused this? Any notable fixes?
Click to expand...
Click to collapse
Xposed is the culprit.
Here's how you uninstall problematic magisk module from twrp since you're stuck in bootloop
https://magiskroot.net/uninstall-ma..._Module_with_Magisk_Manager_for_Recovery_Mode
Thanks to everybody for their replies. I flashed the stock ROM using MiFlash tool and it worked. Thankfully didn't lose anything important in the process.
There's a list of "reliable" magisk modules for Poco F1? I just installed AnxCam (MIUI Cam Port) and Youtube Vanced and I'm impressed with'em.
If he uninstalled magisk instead as stated in link below, would that work? Isn't it systemless?
https://magiskroot.net/uninstall-magisk-module-twrp/
Hello all!
Code:
Standard disclaimer, don't blame me if your house catches fire, you're choosing to mod your device.
Device must (obviously) be bootloader-unlocked.
Steps (do them in order):
Magisk 19.3
Download magisk and flash in TWRP, then reboot.
riru-core 19.5
Download riru-core and either flash from Magisk Manager or flash in recovery, and then reboot again.
EdXposed 0.4.6.0 and EdXposed Manager
This version of EdXposed is the only one that supports Android Q, even the beta doesn't yet. So you have to use this specific version. Install the manager apk, then flash the zip in either magisk or TWRP. Reboot to apply changes.
Now you can use any xposed module that you wish.
https://forum.xda-developers.com/Mi-9/help/edxposed-xiaomi-eu-9-8-29-android-q-t3963437
safety net passing?
gryffynmp said:
Hello all!
Device must (obviously) be bootloader-unlocked.
Steps (do them in order):
Magisk 19.3
Download magisk and flash in TWRP, then reboot.
riru-core 19.5
Download riru-core and either flash from Magisk Manager or flash in recovery, and then reboot again.
EdXposed 0.4.6.0 and EdXposed Manager
This version of EdXposed is the only one that supports Android Q, even the beta doesn't yet. So you have to use this specific version. Install the manager apk, then flash the zip in either magisk or TWRP. Reboot to apply changes.
Now you can use any xposed module that you wish.
Click to expand...
Click to collapse
Why magisk 19 3? 19.4 not working?
smohanv said:
safety net passing?
Click to expand...
Click to collapse
SafetyPatch-v3.zip, it's a magisk module.
g_seva said:
SafetyPatch-v3.zip, it's a magisk module.
Click to expand...
Click to collapse
Hi, Thank you so much.
I was trying MagiskHide Prop (https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228) and failed flashing on my Android Q (Xiaomi Mi 9, MIUI 11 running). I flashed the patch you shared here. I flashed in Magisk and it passed safety net (CTS Profile pass).
I am now able to use Google Pay.
Hi guys, will Twrp be available for this device so I can root it with Supersu, instead of Magisk, couldn’t get Viper4Android and Adaway run properly with Magisk.
Yes, TWRP will be available, I tried making it for now with a dump but failed, waiting the real sources.
Also, use magisk lol, supersu is ancient and doesn't work. It's impossible that magisk didn't worked with those apps
I think it didn’t work cause of systemless root
TroyCas99 said:
I think it didn’t work cause of systemless root
Click to expand...
Click to collapse
Well no idea, all that I know is that Adaway and 99% Viper is working fine with Magisk.