I did a factory reset on my s9+ yesterday, and after that when i try to search for updates it tries to register my phone, but it fails everytime or just keeps trying forever. I tried connecting it to Kies but it won't recognize it. Idk what happened. It just won't let me check for any updates. It's an unlocked s9+ running on android 9.
Related
Hi guys,
I was trying to upgrade to Android 2.3 on my Sharp Softbank 005SH but the phone got stuck in the Major Update screen and I don't know what to do now. Anyone with experience please help!
The phone is updated to the latest firmware that is required for this major update, Build No. S0900.
So, I decided to go for the PC upgrade option, Downloaded the driver and the Update tool, waited for many hours for the download to complete, then started the procedure.
I then switched the phone to Fast File Transfer USB mode, checked for update, it discovered that an update was available and asked me to restart the phone.
After restarting, I ran the Update tool but it gets stuck at the screen where it checks if the phone is connected in the above USB mode.
Meanwhile, the phone won't reboot in normal mode. If I pull the USB cable out, it says "Update failed. After a reboot the phone will work again." Well, it doesn't because I can't reboot. Even tried removing the battery for a couple of minutes...
same to you
just update my dm009sh from s0300.....failed
guaiwujia said:
same to you
just update my dm009sh from s0300.....failed
Click to expand...
Click to collapse
I've sent my phone back to Japan. Hopefully, they'll fix it there soon.
Obviously, the problem occurs because the phone and/or the OS are not in Japanese.
Hello all, I'm having a slight problem, I noticed that AT&T keeps trying to roll-out a new software update, however, my Galaxy S6 Active will download it fine, and then when trying to install the update I get prompted with the message "The install cannot be completed".
I thought at first this must be due to an application that I had disabled, but unfortunately it was not the case as I enabled every blocked app, and yet I still got the same error.
8 files still remain disabled even though I tell Debloater to "unblock" all and they include the following (I have tried countless times to enable these files with no luck):
ContainerAgent2.apk
EmergencyLauncher.apk
KnoxBBCProvider.apk
KnoxKeyguard.apk
KnoxShortcuts.apk
KnoxSwitcher.apk
KnoxTrustAgent.apk
KnoxVerifier.apk
I even performed a hard factory data reset, and these apps still remained blocked. I just want to be able to receive OTA software updates. Any ideas on what I can do? Thanks.
Install the original firmware via Odin.
DarthVayda said:
Hello all, I'm having a slight problem, I noticed that AT&T keeps trying to roll-out a new software update, however, my Galaxy S6 Active will download it fine, and then when trying to install the update I get prompted with the message "The install cannot be completed".
I thought at first this must be due to an application that I had disabled, but unfortunately it was not the case as I enabled every blocked app, and yet I still got the same error.
8 files still remain disabled even though I tell Debloater to "unblock" all and they include the following (I have tried countless times to enable these files with no luck):
ContainerAgent2.apk
EmergencyLauncher.apk
KnoxBBCProvider.apk
KnoxKeyguard.apk
KnoxShortcuts.apk
KnoxSwitcher.apk
KnoxTrustAgent.apk
KnoxVerifier.apk
I even performed a hard factory data reset, and these apps still remained blocked. I just want to be able to receive OTA software updates. Any ideas on what I can do? Thanks.
Click to expand...
Click to collapse
Hi,
Have you found a solution? what you have to able to OTA update works?
tks!
Hello android fans!
I got used SM-G925F (android 6.0.1) every 10 mins receive warning from KNOOX: Unauthorised action have been detected. Restart, reset, wipe dont work. Tried root phone to remove KNOOX security, but without success. I got OTA update to Nougat, but it cant finish upgrade (i think because of this error). Right now i dont have PC where to connect phone, so reflash new rom is not option right now. Maybe someone else got same problem and got solutions?
I performed a factory reset / wipe data. It boots but doesn't boot to home screen. it gets stuck on (update check failure to connect to server) though connected to wifi and internet working.
I have tried rooting with jmz package after installing Pdanet v5 but the rooting fails and says phone not connected / drivers not installed.
device manager says phone connected and drivers working
Please any help on how I can bypass this update check or root the nabi device??
Thanks for your solutions
I'm in the same boat. I had to do a factory reset, because all of a sudden, I was asked for a password that I never set up, after a reboot. Online the only solution I found was to factory reset. But, after the factory reset, I found out that Nabi is no longer supported by Mattel. They supposedly released a final update to remove unsupported apps and basically turns the Nabi into a normal android tablet, but my tablet will not update because it fails to connect to server. Have you tried to contact Mattel to get any support?
Last week on Thursday, I allowed Verizon to install their Software Update 21 (April 2020.) It made it as far as the going through the optimizing apps and then was stuck in a boot loop. The phone would be usable for about a minute, then would freeze, and then reboot. If I clicked on the System Update option in settings, it would say that a system update was in progress. I chatted with Verizon, and they ended up telling me that the only way to stop the update was to do a factory reset, which I am doing everything I can not to do that as I don't want to lose my data.
I changed it into maximum power mode and it did stop the update for that time being and I was able to use the phone, texting, etc. This allowed me to at least connect the phone to my computer to backup all of the directories. After many reboots, on Friday it finally stopped doing the update and gave me an error which I think was 410. It thought it was updated, though did show as failed. When checking for updates, it said it was the current version. Twice I was able to get the phone to stop by freezing when going to the app and stopping some programs (sadly, I was not able to remember the exact combination that worked) which allowed me to use the phone like normal. All this while, I was uninstalling a large amount of the apps that I had installed hoping that would minimize whatever may have been causing the problem.
Went to each of the google and samsung apps, stopped, disable, and reverted them all back to factory defaults. Guess that was a bad idea, from then on I received an error as soon as the phone started which caused it to go directly into recovery mode. I chatted with samsung and they thought it might be a hardware issue. I still think it is related to their software update, so not a hardware issue.
By using Odin, I loaded the firmware from March 2020, and when it rebooted, it did go as far as optimizing the apps, though anytime it booted up, it would never get past the white verizon loading screen. It took me hours before I discovered that Odin was failing to load the firmware on the phone as the Windows 10 laptop only had USB 3.0 ports which don't always work with Odin, and ended up being successful using my old Windows XP laptop as the USB 2.0 ports worked fine. After a bit hanging on the verizon loading screen, it would reboot and never went past. I have been able to load the March and April 2020, though none of them will ever get past that white verizon loading screen. I did see something say that in loading TWRP, I could possibly do a full backup of the phone which is what I would like to do.
One time I only loaded the AB file for a different version than I had loaded, and it was the first time it went beyond the white screen, only to tell me that the verification failed and it would need for me to do a factory reset. I was able to reboot the phone without actually doing the reset.
I have read many posts here and the forums on androidcentral, and with so many things, I really needed to post to get guidance from people here that can point me in the right direction for any other things that I can try. As you have read, doing everything that I can to get the phone working by keeping my data. Any help would really be appreciated.