OrangeFox Recovery Project R11.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR EXYNOS ONLY
Please do some research about custom recovery before anything! You will have first to have fully working twrp in order to flash this recovery.
• Download link :
OrangeFox-Unofficial-crownlte-r2.0.2_fox.zip
- Mega
- GDrive
• Guide : Go to twrp, flash the zip, enjoy!
• Device tree : android_device_samsung_crownlte
• Kernel source : android_kernel_samsung_crownlte
• OrangeFox source : OrangeFox
• Known bugs :
No data decryption
If you face error like "Unable to mount /system_root" or any related to system partition mounting when flashing zip file(s), go to settings, general, check "Reboot to recovery without SAR mount". It will reboot to recovery when flash the zip(s) again.
• Features :
User friendly UI
Based on latest TWRP
F2FS support
Lot of useful file manager features (uncompress, compress, display text files, ...)
Built-in support for installing/removing Magisk and managing installed modules
Built-in support for installing init.d functionality
Torchlight
AromaFM
Customizations : lockscreen, password, status bar, ...
Theme engine
And more
• Additional :
LZMA compression
Clang compiled
• Screenshots : Here
• Credits :
The main contributors : @MrYacha & @DarthJabba9
The OrangeFox Team
TeamWin for TWRP
Samsung for kernel source
Informations
Status : Stable
Created : 2019-10-17
Last edited : 2020-08-24
Changelogs :
Old releases
Release 1.1 :
Add an option to prevent samsung account and lockscreen loop issue in the zip install and foxaddons pages - I strongly advise to check the box when flashing a kernel
Release 1.2 :
Add a workaround for the (too) common busybox calls
Add the secured kernel flash checkbox for image flash
Release 1.3 :
Synced to last sources
Switch to busybox which should fix most of zip flash issues
Fix screenshots color
Move secured kernel flash checkbox in settings
Fix files informations not shown with busybox
Release 1.4_q :
Add support for system as root introduced in One UI 2 beta - Don't use it with android Pie
For devs : in line with twrp, system partition mount point as moved to /system_root and android system folder is symlinked at /system, some changes are needed to keep compatibility
Release 1.5_q :
Synced to last OrangeFox source (new languages and others improvements)
Updated kernel to DTA1 source
Added a workaround to support Pie based zips
Fixed dmesg
Release 1.6_q :
Finally support almost all roms
Minor UI improvements
Release 1.7_q :
Synced to DTA5 kernel source with latest linux stable upstream (4.9.214)
Clang compiled kernel
Reworked system mounting, it should be more rom compliant
Release 1.8_q :
Synced to latest Fox source
Synced to DTCA and 4.9.218 kernel source
Added again and fixed lockscreen/samsung account issue patch
Added torchlight toggle (Top right in menu tab)
Release 1.8.1_q :
Fixed clock issue
Fixed not clang compiled kernel in r1.8
Release 1.9 :
Removed my hardcoded force system as root mount stuff (All AOSP 10 based and some OneUI roms (as DevBase) have now merged proper SAR support)
Merged some SAR related commits which unified Q and Pie support
Fixed unencryptable data partition after format
Synced to last kernel and recovery sources
Release 1.9.1 :
Added system/vendor/odm backup as image option
Updated magisk
Release 1.9.2 :
Added a fix for errors related to system mount, see bug section above
Release 2.0.0 :
Updated to newest OrangeFox R11.0, based on twrp 3.4.0.0 and including lot of improvements from OrangeFox team thanks to them
Synced latest kernel sources (ETG3/4.9.232)
Updated crosscompilers to Clang 11 and GCC 10.2.0
Release 2.0.1 :
Fixed boot issue after splash screen customization (Thanks to @[email protected] for pointing it out!)
Synced to latest linux kernel sources (4.9.233)
Last release
Release 2.0.2 :
Synced to latest OrangeFox and samsung + linux kernel sources (4.9.257)
[emoji173]️[emoji173]️[emoji173]️[emoji173]️[emoji173]️[emoji173]️
Sent from my [device_name] using XDA-Developers Legacy app
Looks nice will have to try it
this its COOL! if you possible add password in recovery, and dont possible remove if you want reset the phone.
i test my day off.
good
Looks really good, excited to give it a go!
That's some very good stuff ??
wow! really cool. good job man!
Congratulations @Arteush on the release of your project! Don't let the haters get you down!
Looking forward to give it a go.
I spent about 15 minutes playing around with it, everything seems to work except theming the splash screen (won't load any PNGs I've tried, and putting your own colour hex code always results in black). Really nice work
Sorry for my ignorance... but is this a custom recovery (to replace TWRP) or a theme_ing+ all-in-one?
elmor0 said:
Sorry for my ignorance... but is this a custom recovery (to replace TWRP) or a theme_ing+ all-in-one?
Click to expand...
Click to collapse
A custom recovery
The new release include a patch to prevent samsung account and lockscreen loop issues, strongly recommanded to check the box when flashing a kernel.
Wow, this is incredible. Thanks for sharing.
azZA_09 said:
A custom recovery
Click to expand...
Click to collapse
That'll replace TWRP?
Sent from my crownlte using XDA Labs
Yes replace
Gandicela said:
That'll replace TWRP?
Click to expand...
Click to collapse
Yep!
Same purpose but with more features. And a refreshed UI.
Arteush said:
Yep!
Same purpose but with more features. And a refreshed UI.
Click to expand...
Click to collapse
Unlike TWRP/ ClockWorkMod - this will modify statusbar/ themes etc?
TWRP will be overwritten by this or both options available on installation of OrangeFox?
Can you give examples of what statusbar changes it can make? - Dynamic colour SB? SB icon colour changes? SB Clock styles? SB battery options? (it doesn't show on the example pics from the OrangeFox link)
Thanks
elmor0 said:
Unlike TWRP/ ClockWorkMod - this will modify statusbar/ themes etc?
TWRP will be overwritten by this or both options available on installation of OrangeFox?
Can you give examples of what statusbar changes it can make? - Dynamic colour SB? SB icon colour changes? SB Clock styles? SB battery options? (it doesn't show on the example pics from the OrangeFox link)
Thanks
Click to expand...
Click to collapse
The best I can tell you is to try..
Look at this screenshot for the status bar options.
Thank you for this recovery project... I was following the official telegram thread and did not know this thread already existed here...
Great work. Love the options...
Couple of questions
1. I got pin not correct in lock screen. The fix in the recovery ( add-ons) did not help. I had to delete some files in data/system to clear the password.
Then I got into the issue of samsung password not working... Had to spend sometime cleaning up the storage of a bunch of smasung apps to sign in again.
Is there a better solution to this?
2. Is there a way to show the zip files as default instead of all files in the file section. Most common reason why I go into recovery is to flash a file. Having the above option will be very useful...
Once again appreciate your work
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..
Features:
stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
enhanced performance.. longer uptime with less slowdown
custom written CRON and init.d.
UI and graphics improvements
custom navbar, navring, and hardware key features
improved notification handling (active display & halo are in review also)
usability improvements like power reboot menu and sound
animation control
Improved Vanir keyboard
CM's profiles & quicksettings
additional quicksetting tiles
immersive mode
statusbar mods
clock & battery mods
lockscreen blur and other mods
busybox, embedded root, init.d, cron etc
yatta yatta yatta
What's working:
RIL(Mobile and Data Network)
Camera
Wi-Fi
Bluetooth
Recovery
ADB
GPS
Proximity Sensor
External SD Card
Internal SD Card
Audio/Video Playback
Physical Buttons
Speaker
Airplane Mode
Downloads:
New releases (4.08.2016 and up) on
http://ultimaterom.h1n.ru
Oldest release are available at link below:
FTP
Sources:
Device tree: https://github.com/ChronoMonochrome/android_device_samsung_codina
Kernel: Chrono Kernel
Vendor: https://github.com/ChronoMonochrome/android_vendor_samsung_u8500-common
Credits:
@dh.harald
@jereksel
@SakuraDroid
@Unjustified Dev
@Meticulus
@munjeni
@percy-g2
@Epirex
@marsarmy
@TeamCanjica
@NovaFusion
@Vanir Team
Special Thanks
@monstro78 for providing build server
@S.AMU for providing FTP server
XDA:DevDB Information
[ROM][4.4.4] Vanir [codina], ROM for the Samsung Galaxy Ace II
Contributors
ChronoMonochrome
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: stock 4.1.2 && custom recovery
Based On: Vanir
Version Information
Status: Testing
Created 2015-06-20
Last Updated 2016-08-04
Changelogs && Bugs
Changelog
25.01.2016
Applied JustArchi optimizations v3 for CM-11.0 (without -O3 flag)
Compiled with the latest Linaro GCC 5.2
Removed Navigation Bar && Ring - fixed touchscreen 2mm dead zone on the bottop side of the screen
Disabled a lot of an extra unneeded debug
Decreased some delays such as DEFAULT_LONG_PRESS_TIMEOUT, GLOBAL_ACTIONS_KEY_TIMEOUT, etc
Improved scrolling
libwebviewchromium.so blob is replaced with the one from my latest CM11 build
26.09.2015
camera fixup
fixed bluetooth issue (thanks to @shaqman89 for the hint)
wifi tether should be fixed (needed test)
17.09.2015
solved all camera related issues
fixed missing APNs
merged fixes to the stagefright CVEs
compiled with dex pre-optimization
optimization of apps graphics with optipng
01.08.2015
stagefright security issue fix
Fixed camera FC (thanks to Epirex for help)
Fixed google play(GPS location) FC bug
Fix for GPS blob [Meticulus]
Software mediacodecs fixes and improvements [Meticulus]
EGL time fixup [Rox]
most of ROM repositories are switched to cm-11.0 branch - more stability and fixes
ROM optimizations are resetted to cm-11.0 ones - less bugs/breakages
universal package - introduced codinap support
19.06.2015
ROM:
initial release
Kernel:
f2fs update (thanks to XperiaSTE team)
various fixes and improvements
reverted previous optimizations(since it messes some things)
Bugs
please report if you'll find them
Misc
Important note:
Starting from 17.09.2015 build the installer of chrono kernel is decoupled from a ROM installer, so e.g. no support for f2fs or dual boot with a default ROM kernel. In order to have all features of the universal kernel package you need proceed standalone chrono kernel installation.
Conversion EXT4 -> F2FS:
TWRP:
1) back up the system
2) find backup folder and rename system.ext4.win to system.f2fs.win, data.ext4.win -> data.f2fs.win etc.
3) restore backup of selected partitions
4) flash zip from attachment (chrono kernel is supposed to be installed)
CWM/Philz:
1) back up the system
2) format selected partitions to F2FS
3) restore backup of selected partitions
4) flash zip from attachment
Fix to GAPPS(GMS) FC:
http://forum.xda-developers.com/showpost.php?p=61448886&postcount=14
Chrono...is that You?
C'mon, you should recover...re-co-ver, mate.
Btw - f2fs is WRONG, allright?
xo.en said:
Chrono...is that You?
Click to expand...
Click to collapse
Yep Is there anything wrong? Just found some spare time to return to android development.
UPD. while I'm on the treatment, there is almost nothing anything to do for me... Just wanted to bring this ROM up before I go to another city because of treatment.
For f2fs i have to convert first the rom with the script or i can install it as it is?
manthes said:
For f2fs i have to convert first the rom with the script or i can install it as it is?
Click to expand...
Click to collapse
I caught myself that I haven't tested f2fs with this ROM(of course I've tested f2fs update itself). There installation with f2fs will be a little tricky, because /ramdisk/fstab needs to be changed(it can be updated after reflashing ROM, but this is not the best solution IMO). I will test it and report later.
UPD. Btw, kernel version line messed up a bit, just don't pay attention on this
UPD2. added info about f2fs to 3rd post.
With flufli's script f2fs installation was fine but i had system fc the first time, launcher's fc, camera as you have said and the rom was laggy for me even without installing any other app.
I went back to liquid so that's the only feedback i can provide
manthes said:
With flufli's script f2fs installation was fine but i had system fc the first time, launcher's fc, camera
Click to expand...
Click to collapse
Well, updater_script of this ROM is quite different from CM11, and it was never guarantied(AFAIK) that it will work with another ROMs. For me mentioned in 3rd post way is working, and there are no FCing apps(besides of aforementioned camera).
and the rom was laggy for me even without installing any other app.
Click to expand...
Click to collapse
Note that for first 10 minutes media scanner is running in background, so there's nothing unusual that phone may lag in this time.
Well, after reading janice vanir topic I've found that GAPPS(GPS) FC bug will also appear there. This is related to -O3 optimization applied to binaries which are compiled in thumb mode. I haven't messed with optimizations yet(and Linaro GCC 4.8 is used here), but unfortunately for us, -O3 was already applied. Known fix for lollilop won't work on kitkat - it simply doesn't apply well, actually it can be applied, will try it later.
Then compile with -O2 and apply some non problematic -O3 flags manually
ace2nutzer said:
Then compile with -O2 and apply some non problematic -O3 flags manually
Click to expand...
Click to collapse
This isn't such simply. AFAIK, anything except -Os being applied to thumb code will fail. It's interesting to force ARM mode to check if it as well fixes issue, but first I'll try out removing forced alighment code. I have too slow internet to upload(or rather - download) new build in near time, when applying just one fix probably can fit in few blobs.
Test fix to GAPPS FC bug. To apply reboot to recovery and copy files to /system/lib(make sure you have backup of original files!). Please test it and report if it's working.
http://xda.mister-freeze.eu/XDA-files/ChronoMonochrome/VANIR-KK44/gapps_tmp_fix.zip
ChronoMonochrome said:
Test fix to GAPPS FC bug. To apply reboot to recovery and copy files to /system/lib(make sure you have backup of original files!). Please test it and report if it's working.
http://xda.mister-freeze.eu/XDA-files/ChronoMonochrome/VANIR-KK44/gapps_tmp_fix.zip
Click to expand...
Click to collapse
Well done! This works for your CM11 05.05.2015 (Running Google Play services 7.5.74 (1997312-034))
The idea to use other/older libjavacore.so was known but not to change libjavacrypto.so also. Which is obviouly if I think about it once more
As you know me I made an installer zip of this. It is not my work actually - I only changed files, added codina and CM11 checking and added deinstall routine for my old init.d fix.
You can use it also (of course) if the init.d fix was not used...
This will do the following:
Deletes init.d 50gmscache (if installed)
Deletes cache folder of gms (will be build new automaticly)
Makes backup (*.so.bak) of original libs
Copy working libs over the original ones.
Okay, good to know that fix is working. Now I can publish patch which is backport of well known fix for lollipop https://github.com/ChronoMonochrome...mmit/a2d116008d15c3db373ad372ab37548058926bfc .
Good work, Chrono
I saw that in rom preinstalled r3 kernel
Is there an update already or it special version for Vanir?
Kirya12347 said:
Good work, Chrono
I saw that in rom preinstalled r3 kernel
Is there an update already or it special version for Vanir?
Click to expand...
Click to collapse
There is an update(read changelog in 2nd post), but I haven't pushed it because I need to deal with some changes in kernel installer(and in build script, in particular) and make sure that they works properly.
Thank you
:good::good::good:
upd: kernel used with this rom is the best.
I made fatal mistakes by flashing nonrelated chrono's ones.
I was SO WRONG flashing latest one instead of testing included one.
Definitely, kernel used there is really fit for this rom.
Awesome(some tweaks are still needed, but, damn, it is really, really awesome)!
Kernel we have there still can use latest chronokernelsettings(MANY customization are needed to get totally great results, but CKS + perfctrl used together are capable to push a2 to the max, imho).
This is awesome rom.
Small advice - add these to init.d with 755 permission, reboot:
http://speedy.sh/FVaw2/init.d.7z
Then you can optimize your system even more with chronokernelsettings + perfctrl(do NOT overwrite init's settings there).
Then - apkopt - list of apk's to being optimized - soon(check fuc.kin dialer gain)...
Then - media.scanner, any wrong id tag may result in batt drain(imagine >500 mp3 files with wrong id tags, then imagine 1500 files with wrong tags on extcard and media.scanner working)...
Yup, it can DRAIN your battery without reason...
F'ed up tags of your music/vid files may break your nice, flatline batt usage, too.
Another story - ex-ter-nal music player/vid player...
And so on, so on...rom itself, or kernel will NOT help you, if you are not aware how andorind is working.
Anyway, good luck....feel free to ask.
But maybe tomorrow, now i am drunk, allright.
Chrono, thank you.
Not enough space on /system
It seems apps that require to write some data on /system (like AdAway or Mount2SD) are not working correctly after f2fs conversion. Error message says "there is not enough space on /system". I wonder if anyone experienced the same or is it just me messing up at a step?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SAOSP Google+ Community
This is SimpleAOSP ROM based on Google AOSP. This ROM is as we want it and this is as Simple as it gets.
Features :
- Layers support (merged commit for full support)
- Customizable battery icons
- Navigation bar dimension (width & height) customizations
- Navigation bar key customization
- Expanded desktop
- Hardware keys configuration
- Sleep gestures (double tap navigation bar, status bar, and lock screen to sleep)
- Customizable LED battery & notification light
- Customizable clock & date (layout, date size, etc)
- Statusbar weather
- Advanced power menu with reboot options
- Configurable rotation settings (0, 90, 180, 270 degrees)
- Customizable recents clear all button
- Addon.d support (enables GApps and Layers persistence, and more)
- Integrated SuperSU and Layers in Settings
- Toggle (enable / disable) IME selector notification
- Configurable status bar quick pulldown
- Volume key wake/music control & cursor control
- ... And so much more
Fatal Issues :
* None for now
Minor Issues :
* None for now
Installation :
* Wipe data / factory reset
* Install ROM zip file
* Install GApps (must be done directly after flashing ROM)
* Reboot !
Update installation :
* Wipe cache & dalvik cache
* Install the updated ROM zip file
* Reinstall everything you have flashed on previous build (kernel, root, etc), (older builds : this includes the hardware key patch)
* Reboot !
Download(s) :
saosp_find7op-2016-04-06 (latest)
Extra(s) :
Enabling hardware keys (use this in the latest build)
Patch to enable hardware keys (not needed in the latest build)
Addons (add back camera, email, and more)
Old Download(s)
saosp_find7op-2016-04-04
saosp_find7op-2016-01-24
saosp_find7op-2016-01-04
saosp_find7op-2015-12-18
saosp_find7op-2015-12-12
saosp_find7op-2015-12-10
Earlies :
Earlies are build meant to be used as a preview, please mention you're using an early build if reporting a bug.
saosp_find7op-2016-02-05 (latest Earlies)
saosp_find7op-2016-02-03
saosp_find7op-2016-02-02
Additional information :
* Root is not included by default, flash your preferred root management app (SuperSU, Superuser, etc) to enable root access
* Hardware keys is disabled, but can be enabled (see the guide above)
* ROM is compiled with Omni "find7op" device tree, any custom kernel compatible with Omni is compatible with this ROM too
* GApps must be flashed after ROM flash, you'll get force closes if you don't
* Any GApps built for 6.0.x should work (opengapps.org & Slim GApps is recommended)
* ROM includes GApps persistence, there's no need to reflash GApps after flashing an update for the ROM
* ROM does not contain any camera, music, calendar, and browser app, use the addons above to reinstall these apps
Credits :
- SAOSP Team
- OmniROM Team
- CyanogenMod Team
- Team Exodus
- Anyone that has maintained 'find7op' tree
- Anyone that I might have forgotten
- My friends : @Senthil360 @GreekDragon and @Paget96
Disclaimer :
I am not the developer of the ROM, I'm just an ordinary guy that compiled the ROM and maintained (added) OnePlus One specific files, nothing more nothing less. All other work is done by SAOSP Team, they're the amazing dudes.
Source (sauces) :
SAOSP sources
Device tree
Kernel sources
FAQ (or Q&A)
1.) ROM Base
The ROM is based on AOSP, but OnePlus One device tree (device specific files needed to build the ROM) is based on Omni, I can assure you everything else is either AOSP or modified from AOSP
2.) ROM Issue
Since the device tree is based on Omni, the issue that Omni has persist within this ROM.
3.) Custom Kernel
Anything that is compatible with Omni (latest release) is compatible with this ROM too, I recommend using Donkey One kernel for customizations and @stranostrano's kernel for simplicity. Both works fine and well with the ROM.
4.) Feature Request
I'll add a feature if it's not overly intrusive and it's not there because of vanity sake. I will also minimize adding features since it'll break the philosophy of the ROM itself
5.) Bug Reporting
I will gladly accept any bug reports as long as it contains enough details so that I can reproduce it myself. Including logs (kmesg, dmesg, logcat) and screenshot if it's a graphical issue would help me a lot.
Thanks downloading....
I just did a clean flash. Looks like another clean flash is calling.
Great!!
Wohooo! Definitely my favorite while on nexus 5. Glad to see it making it here too! Thank you OP!
any1 installed this ROM? i get an error while copying the file to the Phone and with ADB recovery crashes
primo14z said:
any1 installed this ROM? i get an error while copying the file to the Phone and with ADB recovery crashes
Click to expand...
Click to collapse
I'm downloading now. What files you trying to copy?
Arju007 said:
Wohooo! Definitely my favorite while on nexus 5. Glad to see it making it here too! Thank you OP!
Click to expand...
Click to collapse
I built it because it's my favorite ROM on the N5 too
primo14z said:
any1 installed this ROM? i get an error while copying the file to the Phone and with ADB recovery crashes
Click to expand...
Click to collapse
There might be some problem with your zip, it flashes fine on my device. Try redownloading if you can.
F4uzan said:
I built it because it's my favorite ROM on the N5 too
There might be some problem with your zip, it flashes fine on my device. Try redownloading if you can.
Click to expand...
Click to collapse
i did twice and it fails allways
I think there is a problem with the zip,i've downloaded it two times but i'm not able to open it
I'll check out the zip problem, sorry for the delay and problems !
F4uzan said:
I built it because it's my favorite ROM on the N5 too
There might be some problem with your zip, it flashes fine on my device. Try redownloading if you can.
Click to expand...
Click to collapse
Even I tried. Can't seen to flash. When I download from PC, I cannot copy the zip to my phone. When I download from mobile, I cannot flash. It says corrupt file.
Possible to upload to a site other than Mediafire?
I'll try uploading it to AFH, thanks all for the reports !
Edit : I can confirm the zip on the cloud is corrupted, it is being reuploaded at the moment, don't hold your breath since it'll take some time. I also rebuilt the ROM to fix up some leftover issues.
F4uzan said:
I'll check out the zip problem, sorry for the delay and problems !
Click to expand...
Click to collapse
Waiting. Hope it is soon. I am waiting without a ROM on my phone at the moment. Dont want to flash another ROM and then do all over again.
---------- Post added at 03:00 PM ---------- Previous post was at 02:41 PM ----------
F4uzan said:
I'll try uploading it to AFH, thanks all for the reports !
Edit : I can confirm the zip on the cloud is corrupted, it is being reuploaded at the moment, don't hold your breath since it'll take some time. I also rebuilt the ROM to fix up some leftover issues.
Click to expand...
Click to collapse
OK. Waiting. Just flashed another ROM and restored my WhatsApp and BBM. Will wait for new link and do a complete wipe.
Take your time for the build and upload.
Waiting for new link will surely flash it!
waiting +1 :thumbup:
dikirim dari my Oneplus One
The ROM has been reuploaded, I've also rebuilt it to incorporate additional changes (fixed statusbar weather app, fixed HW menu key enabled while other key has been disabled) and latest code. Again, really sorry for the zip issue previously. Thanks for trying the ROM !
F4uzan said:
The ROM has been reuploaded, I've also rebuilt it to incorporate additional changes (fixed statusbar weather app, fixed HW menu key enabled while other key has been disabled) and latest code. Again, really sorry for the zip issue previously. Thanks for trying the ROM !
Click to expand...
Click to collapse
No worries dude. Downloading now.
Quick question, if I flash Custom Kernel that supports DT2W, Donkey One in this case because it supports Omni, will I be able use DT2W?
indian84 said:
No worries dude. Downloading now.
Quick question, if I flash Custom Kernel that supports DT2W, Donkey One in this case because it supports Omni, will I be able use DT2W?
Click to expand...
Click to collapse
Donkey One's DT2W depends on Omni's DT2W settings (I guess). But fear not, I have merged the offscreen gesture commit (I know, I should have bundled it with the reuploaded version), I'll be releasing it when I merge other huge and important things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is a theme with minimalist and dark lines that are integrated with the brand.
Based on TWRP-UNIFIED-3.5.1_10....
Fastboot Flashing Code:
fastboot flash recovery BLACKCAT-TWRP-3.5.2_v1.0_Unified_Flash.img
Downloads:
Black Cat TWRP IMG File
Black Cat TWRP Flashable
Features:
Added BlackCat Skin.
Icons of folders, files etc ... redesigned
Fixed cursor, now it is not invisible
Non-CFW based for Custom Roms and Miui 12 A10
Magisk v22.1 Option
UnRoot Option
Patch Vbmeta avb 2.0
Close avb 2.0
By: @GLokin666
Credits: @ZIDAN44 @Sahil_Sonar @Agent_fabulous @TheMalachite @santoshhh000
SCREENSHOTS:
Update TWRP V2 Support Miui 12.
Changelog:
Magisk v21.4 Option Added.
UnRoot Option Added
Patch Vbmeta avb 2.0 added
Close avb 2.0 added
DOWNLOAD: https://drive.google.com/file/d/1akFE1h-2uXN9tq2rsX_YYwPlWD3co257/view
Are you using base twrp from the themed unified twrp by me ... If yes then you should mention the credits too and also give credit to zidan too
santoshhh000 said:
Are you using base twrp from the themed unified twrp by me ... If yes then you should mention the credits too and also give credit to zidan too
Click to expand...
Click to collapse
Ok, added
GLokin666 said:
Update TWRP V2 Support Miui 12.
Changelog:
Magisk v21.4 Option Added.
UnRoot Option Added
Patch Vbmeta avb 2.0 added
Close avb 2.0 added
DOWNLOAD: https://drive.google.com/file/d/1akFE1h-2uXN9tq2rsX_YYwPlWD3co257/view
Click to expand...
Click to collapse
YOU Sir, are the BOSS!!!
Thanks for making this possible!!!
Does it support MIUI12.5 - Android 11 based?
Also can it stay persisted in event of flashing update like LR.TWRP?
Crescendo Xenomorph said:
YOU Sir, are the BOSS!!!
Thanks for making this possible!!!
Does it support MIUI12.5 - Android 11 based?
Also can it stay persisted in event of flashing update like LR.TWRP?
Click to expand...
Click to collapse
At the moment only with Miui Android 10, Miui 12.5 android 11 you use lrtwrp.
Really nice work I must say....
Looks dope, works fine..
Hello,
It is possible to unlock the phone with this flash?
I help my sister, I try to flash a ROM for first time !
I opened a post here, if you can help me !
Need help to fix a boot loop with stock ROM
Hello, I'm trying to help my little sister with her phone, she has a Xiaomi REDMI Note 8 PRO with a stock rom, never flashed. A few days ago her phone shut down for no reason with the battery at 80%, and now there is a boot loop :/ Can you help...
forum.xda-developers.com
UPDATE BLACK TWRP TO VERSION 3.5.1!!!!
Features:
Magisk v21.4 Option.
UnRoot Option.
Patch Vbmeta avb 2.0.
Close avb 2.0.
DOWNLOAD:
BLACK-TWRP-3.5.1_10-UNIFIED-begonia.zip
drive.google.com
Based on Latest TWRP 3.5.1 Unified
by: @GLokin666
Credits: @ZIDAN44 @Sahil_Sonar @Agent_fabulous @TheMalachite
UPDATE BLACK TWRP TO 3.5.1 V2
Changelog
magisk 22.0 stable option added.
minor fixes.
DOWNLOAD:
BLACK-TWRP-3.5.1_10-UNIFIED-V2-begonia.zip
drive.google.com
Based on Latest TWRP 3.5.1 Unified
by: @GLokin666
Credits: @ZIDAN44 @Sahil_Sonar @Agent_fabulous @TheMalachite
I have a big problem... could you help me in direct message please ?
Will this support f2fs? I am currently using f2fs data and cache partition and this recovery can't mount them..
looks awesome, thanks.
i install this recovry but it does not mount storage and show stroge 0mb. what should i do?
128G version EEU miui 12 android 10
你好，
Data转换为F2FS后，无法挂载Data，只能使用EXT4，
以后是否可以支持F2FS呢？
-----------------
Hello,
After IMG Data is converted to F2FS, you can not mount Data, you can only use EXT4.
Can you support F2FS in the future?
-----------------
I'm sorry, I don't speak English
Great TWRP, thanks!
But I want to reports a small usability bug/issue :
when in File Manager and you need say to change the file name - the cursor is invisible and you can't guess where you type in the charaters.
Runner_cz said:
Great TWRP, thanks!
But I want to reports a small usability bug/issue :
when in File Manager and you need say to change the file name - the cursor is invisible and you can't guess where you type in the charaters.
Click to expand...
Click to collapse
I face this problem in the decryption screen too. Not that it bugs me much but, now that I come to think of it, this is surely a problem..and needs a fix...
Runner_cz said:
Great TWRP, thanks!
But I want to reports a small usability bug/issue :
when in File Manager and you need say to change the file name - the cursor is invisible and you can't guess where you type in the charaters.
Click to expand...
Click to collapse
its a twrp problem, i cant fix it
Shafin2315 said:
I face this problem in the decryption screen too. Not that it bugs me much but, now that I come to think of it, this is surely a problem..and needs a fix...
Click to expand...
Click to collapse
its a twrp problem, i cant fix it
UPDATE BLACK TWRP TO 3.5.2!!
Changelog:
• Magisk 22.1
• Synced with latest TWRP changes
• Updated kernel and thh from V12.0.7.0.QGGMIXM
• Fixed data encryption on newer miui FW
• Based to latest Twrp by: @Sahil_Sonar @TheMalachite @ZIDAN44 @Agent_fabulous
DOWNLOAD:
by: @GLokin666
Thanks Flashable zip: @BlackCatt11HTC
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OctaviOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. OctaviOS is a reborn of pie based PearlOS.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
• PE/lineage or TWRP recovery recommended.
• SafetyNET SUCSESS !
• Ok google, proximity works & cts passed
-Mic call whatsapp,telegram,..etc still broken and delay (Mojito OSS vendor issue not rom)
- Mic on Phone calls works only social apps got issues
• Must be on "latest MIUI firmware". only firmware not whole rom.
• If you have any issue don't be shy to explain your issue within reply here.
• If you asking for #OFFICIAL rom. the developer planning to go official but not soon.
» Downloads ↓
- Latest 2.9 build NEW UPDATE (2021/10/4) : Click here to download from Google drive (If you are on 2.8 build you have to clean flash)
*Check Post #2 (Click number) for any chancelogs!
• Clean flash:
- Save your rom on PC.
- Boot to recovery (Pe). "you can use TWRP"
- Format Data, Reboot to recovery.
- Sideload through ADB, (sideloading method or flash rom with TWRP).
• Dirty flash:
- Same steps but don't format data.
• Contributors:
- Device Rom by: @mr.vishupanchal
- @ZIDAN44 , for tress.
- @Arya1230 , for helping.
- XDA-OP: @Abdullah.Csit
- @Jannieweigel thanks for testing.
• Information:
ROM Name: Octavi Os
ROM Version: 2.7 | 2.8 | 2.9
ROM Kernel: 4.14.190-LA.UM.9.1.r1-09600
Device: MOJITO/SUNNY
Android Os Version: 11.0 R
Based On: AOSP
Build Type: UNOFFICIAL
Release Date: 2021/7/29
Latest Update: 2021/Oct/4
• Octavi os source: https://github.com/Octavi-OS
• Kernel source tree: Kernel source link
SHOW YOUR LOVE REACTION HIT LIKE
Click to expand...
Click to collapse
Latest device changelog (2021/10/4):
Code:
- ANX camera included
- Fix Mic issues for whatsapp, messenger, Telegram,... etc
- more Fixes & optimizations.
- No issues for now.
Source octavi 2.9 Changelog:
Code:
Changelog for 2.9
New Things added
- Merged r43 September security patch
- Added Statusbar beighness control gesture
- Added notch city from POSP (3 mode cutout handler)
- Added Media notification background for QS media player
- Added Cloudflare DNS as a private DNS provider
- Added a network permission group for Internet
- Added a special runtime permission for sensors
- Added seekbar or Statusbar padding (no more icon cropping)
- Added an option to record longer in Screenrecord (can record upto 15GB now)
- Added hotspot clients feature
- Added Memory view in Recents panel
- Added Kill app button in Recents panel
Fixes done with this update:
- Fixed CTS with September patch
- Improved AppLock
- Fixed the pattern issue with collapsing toolbar
- Removed OTA notification coz spamming as hell
- Fix clock icon in few icon packs
- Fixed Theming options getting reset to default on reboot
- Improved FPS counter
- Fixed Expection errors with Android S clocks
- Fixed Null pointer error in Volume Plugins
- Improved Android S clock
- Made animations a bit humane
- Fixed touch area in Volume panel for caption and ringer button while in landscape mode
- Fixed FOD position if cutout is hidden
- Fixed search bar background appearance in toolbar in Octavi Dialer
- Fixed Call history crash in Octavi Dialer
- Fixed a crash when u tap on Manage conference in Octavi Dialer
- Fixed the inconsistent indents among preferences in Settings
- Fixed the name being small in Settings homepage header
Redesigned stuff
- Redesigned Dark mode page in settings
- Redesigned AOSP Clock app
#Screenshots - Uploaded by me:
Octavi Os 2.7 - Abdullah.csit
17 new photos · Album by Abdullah Ali
photos.app.goo.gl
Regards
The rom looks cool as the cool of your threads. thanks for your hard work in our community @Abdullah.Csit .
Testing thanks @mr.vishupanchal
It has anxCamera ??
AR RAFE CHOWDHURY said:
It has anxCamera ??
Click to expand...
Click to collapse
no But you can install it using magisk
muneeb rizwan said:
no But you can install it using magisk
Click to expand...
Click to collapse
Can you give me link of working anxCam magisk module link ?
AR RAFE CHOWDHURY said:
Can you give me link of working anxCam magisk module link ?
Click to expand...
Click to collapse
Check my INDEX Thread.
[INDEX] Redmi Note 10: Info,guides,roms,kernels,ANX,etc
Time for Old-school stuff time, Welcome to my INDEX thread the shortest way to get you in Redmi note 10 (mojito/sunny) library on XDA-Ddevlopers forum. The Tree on our XDA device forum I found it not clear for now, So this idea 💡 come. ℹ️...
forum.xda-developers.com
Abdullah.Csit said:
Check my INDEX Thread.
[INDEX] Redmi Note 10: Info,guides,roms,kernels,ANX,etc
Time for Old-school stuff time, Welcome to my INDEX thread the shortest way to get you in Redmi note 10 (mojito/sunny) library on XDA-Ddevlopers forum. The Tree on our XDA device forum I found it not clear for now, So this idea 💡 come. ℹ️...
forum.xda-developers.com
View attachment 5374465
Click to expand...
Click to collapse
Why I missed your thread first time
I was thinking about evaluation X ROM in your opinion which one is batter ?
AR RAFE CHOWDHURY said:
Why I missed your thread first time
I was thinking about evaluation X ROM in your opinion which one is batter ?
Click to expand...
Click to collapse
The better depends on your experience. if there is "better or best" rom you won't see another roms.
you were see people using "better" OS than iOS or android lol
Abdullah.Csit said:
- Latest build NEW UPDATE : Click here to download from Google drive
*Check Post #2 (Click number) for any chancelogs!
Click to expand...
Click to collapse
New Hot fix update.
Download link not working....
Thread & Rom Updated ✓
Check Post #2 for changelogs!
• Octavi 2.8 & OSS Build
Spoiler: What is OSS build?
- Stock-vendor refers to the firmware for the phone that is developed by the manufacturer of the phone.
Currently it is believed to be more stable than the OSS-vendor. The problem with the stock-vendor is that in time the support will stop (no more upgrades to newer Android versions), because the manufacturer prefers you to buy a new phone instead of using your phone for years.
The OSS-vendor refers to a firmware developed by the open source community.
It is expected that the OSS-vendor will be supported for much longer than the stock-vendor.
Addymore said:
Download link not working....
Click to expand...
Click to collapse
The developer removed 2.7 file because of full drive storage! I been text him he was uploading the new update and not it's live (2.8) thanks & sorry.
Wen can I flash oss, before or after falshing rom?
Anish Louis said:
Wen can I flash oss, before or after falshing rom?
Click to expand...
Click to collapse
The rom is based on oss vendor. so when you flash latest one it's preincluded.
Hey Abdullah, The download link is not working, so unable to download the rom, and also do you know if there will be future updates or if the rom will go official or not, this is in my opinion the best custom rom among all the ones i have used remaining to test dot OS, would love to see it go official. Thanks.
Faheem xqwerty said:
Hey Abdullah, The download link is not working, so unable to download the rom, and also do you know if there will be future updates or if the rom will go official or not, this is in my opinion the best custom rom among all the ones i have used remaining to test dot OS, would love to see it go official. Thanks.
Click to expand...
Click to collapse
Links updated not because of me because Developer dropped the OSS build and back to non-oss build. Links now updated with latest changes of source.
- No issues
OFFICIAL SOON
Hi!
Will there be an upgrade to version 2.9?
KEED_FOUR said:
Hi!
Will there be an upgrade to version 2.9?
Click to expand...
Click to collapse
Yes! this rom will get own update just the maintenaner little bit busy but don't worry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project [aka TWRP] is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
***
Hi there,
This is the unofficial build based on the official TWRP sources for the POCO X3 [NFC] !
WHAT'S WORKING ? [Everything +++]
- Backup/Restore
- Encryption support : all A11 custom roms
- adb sideload
- fastbootd : for flashing GSI builds and other stuff ! (advanced users only ++++)
- flashing special images
- switch between custom roms without any issue
- miscellaneous : OTG, brightness & vibration control
INSTALLATION PROCEDURE [First Time]
Required firmware version : [R][11] [Mandatory +++]
For Android [Q][10], use the lower version [3.4.0-0]
- Unlock your bootloader
- Enable ADB from MIUI Settings > Developer options
- Plug your USB cable to your Windows PC and type :
adb reboot bootloader
then :
fastboot flash recovery <twrp-xxxx>.img
fastboot reboot recovery
. For MIUI users Only :
After a long investigation, i find out that the command " fastboot boot <twrp-xxxx>.img " is no longer working in Android [11] to avoid overwriting TWRP by the Stock MIUI Recovery. Because the code to do this wicked job after every reboot is inside the stock "init" binary.
So to finally stop this mess :
(after doing)
fastboot reboot recovery
Flash Magisk (rename it to .zip) in TWRP menu ... This will overwrite the original "init" with the Magisk one ... That's All !
This workaround should work for all devices with android 11 oem software pre-installed ! (tested on my oneplus 8 too)
DATA BACKUP & RESTORE PROCEDURE
- Create your backup in the internal storage, for faster process.
- Transfer the created "TWRP" folder to your PC/Micro-SD/USB Stick ... for future use & emergency !
- To restore "Data" again, just do the simple "wipe" before or restore on the fly !
If you do "format", your encryption files will be lost and you can't restore your "data" again, unless you boot to the system then reboot to TWRP to do the simple wipe again and restore !
TOOLS & GUIDES [must read +++]
. TWRP Universal Script
. Google Essential Pack
. LOS 18.1 : SafetyNet Fix & Full System Optimization
. GCam Fix : AOSP 11 / OSS 11
. Scoped Storage Disabler [11]
. Display Refresh Rate [60Hz]
. Downgrade / Upgrade Android versions
DOWNLOAD
Here
XDA : DevDB Information
TWRP, Tool/Utility for the POCO X3 [NFC]
Contributors
gringo80
Source Code 1 : https://github.com/TeamWin
Source Code 2 : https://github.com/mauronofrio/android_device_xiaomi_surya
Version Information
Stable Release : 2021-11-24
Initial Release : 2021-10-03
Reserved
Update 2021-11-24 : Highly Recommended
- fstab update
- improve the overall stability
- final update for both 10 & 11 builds
Update 2021-10-15 :
- fstab update : remove "wrappedkey" flag ... for maximum roms compatibility
Update 2021-10-11 :
- update fastbootd : now it's fully working as a stock recovery +++
- make adb sideload working again ! (all credits ... to me)
- code improved a lot : switch between custom roms is no longer an issue (i know ... i'm awesome )
- ramdisk : use LZMA compression
Update 2021-10-10 :
- initial support for fastbootd
- fix a regression in the previous builds, that caused sometimes, a TWRP bootloop
- improve the overall stability +++
Update 2021-10-09 :
- general code cleanup
- add special version for android 10 [3.4.0-0] (must read the guide - 1st post)
Update 2021-10-08 :
- fix the "internal storage" not being readable after formatting /data
=> please reboot TWRP again after formatting to transfer your files !
- decrypter script : minor update
- add time_daemon
- improve : touchscreen, vibration & the overall performance
Update 2021-10-06 :
- split prop.default to show the true name of the device when connected : surya or karna
- fstab : remove the duplicated string for super
Update 2021-10-05 :
- add vibration support
- rework from scratch the decrypter script ... no more useless stuff
- recompile recovery to (raw).img ... avoids the red splash warning (aka Soft Brick)
Update 2021-10-04 :
- use the official "prebuilt" xiaomi blobs (dtb, dtbo & kernel) for optimal performance and stability
[What does it mean in english, please ?]
Stock Recovery Core with TWRP UI !
Reserved
Which recovery posted above do existing Orange fox users need to flash?
ocujos said:
Which recovery posted above do existing Orange fox users need to flash?
Click to expand...
Click to collapse
there is only one recovery here ... do you mean backup ?
Thanks. I saw three files and got confused.
Does it support OSS decryption?
Alan Ryan said:
Does it support OSS decryption?
Click to expand...
Click to collapse
yes
Can't download it
Alan Ryan said:
Can't download it
Click to expand...
Click to collapse
Sorry, i forgot to update the link !!!
Differences between this one and brigudav's twrp?
sturges said:
Differences between this one and brigudav's twrp?
Click to expand...
Click to collapse
You can see all the difference in the changelog (2nd post) ... I think it's clear enough.
gringo80 said:
You can see all the difference in the changelog (2nd post)
Click to expand...
Click to collapse
Thanks. Do you think I could flash this over brigudav's twrp safely (without losing my current rom)?
of course
Update Install Instruction for MIUI users !!!
see OP for more explanation ...
It doesn't decrypt ROMS with OSS vendor, such as ArrowOS
Alan Ryan said:
It doesn't decrypt ROMS with OSS vendor, such as ArrowOS
Click to expand...
Click to collapse
Do you know of any recovery that does? I've been looking for one, and niether TWRP nor OrangeFox seem to support decrypting OSS vendor ROMs.
ReizoCain said:
Do you know of any recovery that does? I've been looking for one, and niether TWRP nor OrangeFox seem to support decrypting OSS vendor ROMs.
Alan Ryan said:
It doesn't decrypt ROMS with OSS vendor, such as ArrowOS
Click to expand...
Click to collapse
Click to expand...
Click to collapse
OK guys & girls,
Your ROM developer missed something very important in the fstab.qcom (userdata string) ... this flag : "wrappedkey".
Without this, no recovery in the whole galaxy will be able to decrypt your data !
Yes, you have a faulty build. I made for you (and him) the fix. So ask him to add it in the next build !
You have to flash again your build followed with this fix, then format data is mandatory even if he put the fix after ... there is no other way !
He should recognize this error ! (he should also be very careful and test his build before uploading)
As you can see, with the fix, TWRP is able to decrypt /data partition again !
Cheers
Brigudav's TWRP decrypts OSS builds without fstab fix.
Alan Ryan said:
Brigudav's TWRP decrypts OSS builds without fstab fix.
Click to expand...
Click to collapse
To make it short : that's a wrong encryption in ArrowOS ! No rom developer use that (pixel, lineageos, miui ... etc) in any recent device !
Brigudav has made his own version of TWRP to support that error !
I'm telling you how the things should be done ... that's it. If you are happy with brigudav recovery, that's good for you !