Android4Lumia - Android for Lumia 52x, 620 and 720Your warranty is now void. We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please, do some research if you have any concerns about the features included in these ROMs before flashing anything. YOU are choosing to make these modifications on your own, and if you point the finger at us for messing up your device, we will laugh at you.
Unofficial LineageOS 13/14.1 builds for Lumia 52x, 620, and 720
Only the Lumia 520, 521, 525, 526, 620, 720, and 720T are supported for now. There are plans to support other Qualcomm Snapdragon S4-based Lumias as well, though we cannot certainly promise anything.
Do not install this ROM on devices with a Samsung eMMC (flash memory chip)! These chips are known for getting either partially or fully write protected when you do this kind of stuff. While you still *can*, there's an high chance the eMMC will go write protected either during the process or even after. If you still chose to take the risk and your device is dead, don't blame it on us, this warning here and the one on the video are there for a reason!
Official website (For ROM and TWRP downloads): https://android4lumia.github.io/
OneDrive Link (For YouTube tutorial): https://1drv.ms/f/s!Atz2q1RD1cGL7nNWgZnXNjNiyu9f
To install Android on your Lumia, follow this video guide by sjrmac: https://youtu.be/_OW88UTTDug
Be sure to carefully follow all of the instructions or you may/will brick your device.
What works and what doesn't:
Wi-Fi works
Bluetooth works
RIL (SIM Card, Calls, Messages, Data etc.) doesn't work yet
Accelerometer (Rotation) doesn't work yet
Proximity and Light sensors don't work for me
Audio over headphone jack does not work for me
Camera does not work yet
Only official digitizer is supported. If you have an unofficial digitizer, you can try this kernel by TBM 13
For some people SD Cards don't work
You can install GApps, but keep in mind this will make your device very slow. Installing GApps is only recommended on Lumia 525 and 526, since these have 1 GB of RAM.
Do not install this software on your daily devices, because it is not 100% stable at the moment. Perhaps, depending on the device, there is a lot of lag and there are some important things that do not work.
To go back to Windows Phone, follow this guide, which you can also find in the website.
If you have not made a backup, you cannot go back to Windows Phone because every device is unique. Also, DO NOT share your backup with anyone, because by doing so you're giving private data such as IMEI away!
XDA:DevDB Information
Android4Lumia, ROM for the Nokia Lumia 520
Contributors
SuperLolMine, sjrmac, feherneoh, coherixmatts, banmeifyouwant, kholk, m11kkaa, PecanCM, thinhx2, trashmaster76
Source Code: https://github.com/Android4Lumia
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: WPInternals Bootloader Unlock, LK bootloader
Based On: LineageOS
Version Information
Status: Beta
Created 2019-10-17
Last Updated 2020-06-06
thanks, It worked. How do I use swap ram?( My phone only have 348Mb of Total RAM/326Mb in use). I used TBM13 kernel.
clgt said:
thanks, It worked. How do I use swap ram?( My phone only have 348Mb of Total RAM/326Mb in use). I used TBM13 kernel.
Click to expand...
Click to collapse
What ROM did you flash? LOS 13 or 14.1? As far as i know, LOS 13 only detects 359 MB of RAM, while LOS 14.1 detects more free ram so you might want to try flashing that.
clgt said:
thanks, It worked. How do I use swap ram?( My phone only have 348Mb of Total RAM/326Mb in use). I used TBM13 kernel.
Click to expand...
Click to collapse
SWAP RAM is already enabled by default. You don't need to do anything.
Nokia Lumia 630
Anybody tried this on the 630?
SuperLolMine said:
Android4Lumia - Android for Lumia 52x, 620 and 720Your warranty is now void. We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please, do some research if you have any concerns about the features included in these ROMs before flashing anything. YOU are choosing to make these modifications on your own, and if you point the finger at us for messing up your device, we will laugh at you.
Unofficial LineageOS 13/14.1 builds for Lumia 52x, 620, and 720
Only the Lumia 520, 521, 525, 526, 620, 720, and 720T are supported for now. There are plans to support other Qualcomm Snapdragon S4-based Lumias as well, though we cannot certainly promise anything.
Official website (For ROM and TWRP downloads): https://android4lumia.github.io/
OneDrive Link (For YouTube tutorial): https://1drv.ms/f/s!Atz2q1RD1cGL7nNWgZnXNjNiyu9f
To install Android on your Lumia, follow this video guide by sjrmac: https://youtu.be/_OW88UTTDug
Be sure to carefully follow all of the instructions or you may/will brick your device.
What works and what doesn't:
Wi-Fi works
Bluetooth works
RIL (SIM Card, Calls, Messages, Data etc.) doesn't work yet
Accelerometer (Rotation) doesn't work yet
Proximity and Light sensors don't work for me
Audio over headphone jack does not work for me
Camera does not work yet
Only official digitizer is supported. If you have an unofficial digitizer, you can try this kernel by TBM 13
For some people SD Cards don't work
You can install GApps, but keep in mind this will make your device very slow. Installing GApps is only recommended on Lumia 525 and 526, since these have 1 GB of RAM.
Do not install this software on your daily devices, because it is not 100% stable at the moment. Perhaps, depending on the device, there is a lot of lag and there are some important things that do not work.
To go back to Windows Phone, follow this guide, which you can also find in the website.
If you have not made a backup, you cannot go back to Windows Phone because every device is unique. Also, DO NOT share your backup with anyone, because by doing so you're giving private data such as IMEI away!
XDA:DevDB Information
Android4Lumia, ROM for the Nokia Lumia 520
Contributors
SuperLolMine, sjrmac, feherneoh, coherixmatts, banmeifyouwant, kholk, m11kkaa, PecanCM, thinhx2, trashmaster76
Source Code: https://github.com/Android4Lumia
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: WPInternals Bootloader Unlock, LK bootloader
Based On: LineageOS
Version Information
Status: Beta
Created 2019-10-17
Last Updated 2019-10-19
Click to expand...
Click to collapse
Hi Guys, doing some research, I found that, if you want your device to use the full RAM, you must recompile the kernel with ENABLE_HIGHMEM=yes option (because of the architecture of memory allocation in ARM and x86 systems).
I'm not good compiling and making linux kernels, but it wold be wonderfull if some of you try it to see if all RAM begin usable.
You are all making precious work on this proyect!
FredPuMa said:
Hi Guys, doing some research, I found that, if you want your device to use the full RAM, you must recompile the kernel with ENABLE_HIGHMEM=yes option (because of the architecture of memory allocation in ARM and x86 systems).
I'm not good compiling and making linux kernels, but it wold be wonderfull if some of you try it to see if all RAM begin usable.
You are all making precious work on this proyect!
Click to expand...
Click to collapse
If I'm not wrong, that flag is only used in devices that have a lot of RAM (even more than 2 GB)
TBM 13 said:
If I'm not wrong, that flag is only used in devices that have a lot of RAM (even more than 2 GB)
Click to expand...
Click to collapse
Well that's true, but is not all the true. That flag was "popular" in systems with memory >2GB because it let users to access memory pages originally reserved for the kernel (around 1 of 3 of the memory size, at least it says kernel.org), letting in this way take advantage of using more than the traditional 2GB that a i386 system can access.
However this has a processing cost, because the system has to liberate HighMem pages copying them to "another place" (not pretty sure if it occurs to swap space), take the new pages, processing them, an make the work back to have the original pages in place. So, in escence, disable access to HighMem, make the system faster and cheaper in cost of processing, but don't let you use full phisical memory, wich means less parallels aplications in memory.
Would be really intersting testing this in limited systems like Lumia, obviously this will have an effect on battery duration (more processing, more energy used), but if its not too drastic, will have the benefict of running more apps or bigger apps as well.
I'm still trying to learn how to recompile the kernel, but it's not my speciality... but if I can get it on, I'll be more than happy to let you know and share for testing the reconfigured kernel.
Meanwhile if someoane has success on it, would be great to know the experience.
bwilder said:
Anybody tried this on the 630?
Click to expand...
Click to collapse
The Lumia 630 is not supported, only 52x, 620, 720 and 720T.
I want to know how to install Sim (Etisalat) and how to fix cellular network connections?
thanks for your time
ahmedadelzayed said:
I want to know how to install Sim (Etisalat) and how to fix cellular network connections?
thanks for your time
Click to expand...
Click to collapse
You can't do that.
working fine with lumia 720
bwilder said:
Anybody tried this on the 630?
Click to expand...
Click to collapse
hey thanks ..i got it working for lumia720.
except for camera its in good state.
trying to install 1 G-app but its not able to add any google account to the device.
hence getting error ==no google account attached to this device===
any suggestion...
Build environment
Guys,
I have been able to make lineage13 is work in lumia720.great.
looking for setting up a build environment for lineosage13 .. locally .have downloaded code on Ubuntu but not sure about the which version of android sdk to use?
Regards
mhatreudu said:
Guys,
I have been able to make lineage13 is work in lumia720.great.
looking for setting up a build environment for lineosage13 .. locally .have downloaded code on Ubuntu but not sure about the which version of android sdk to use?
Regards
Click to expand...
Click to collapse
If you want to build AOSP/LOS, You don't need Android SDK. I suggest you to search for a build guide here in XDA
I was trying to install A4L even while my phone is showed in WInternals as SAMSUNG, not HYNIX because it's kind a useless without internet but after unlocking bootloader and trying to connect phone in mass storage mode i don't see it as "MainOS" in windows. Everything looks just like before i unlocked bootloader. Lumia 520.
siweq86 said:
I was trying to install A4L even while my phone is showed in WInternals as SAMSUNG, not HYNIX because it's kind a useless without internet but after unlocking bootloader and trying to connect phone in mass storage mode i don't see it as "MainOS" in windows. Everything looks just like before i unlocked bootloader. Lumia 520.
Click to expand...
Click to collapse
If bootloader is unlocked successfully then it should show the MainOS properly.Try restarting with powerbutton + vol up or down as appropriate key pressed simultaneously.make sure battery is full.
mhatreudu said:
If bootloader is unlocked successfully then it should show the MainOS properly.Try restarting with powerbutton + vol up or down as appropriate key pressed simultaneously.make sure battery is full.
Click to expand...
Click to collapse
It doesn't help. Tried several times.
siweq86 said:
It doesn't help. Tried several times.
Click to expand...
Click to collapse
the correction is power button+camera button,after the mobile vibrate release power button and hold on the camera button for approximately 4 secs.
worked for me and surely will work for you too.
mhatreudu said:
the correction is power button+camera button,after the mobile vibrate release power button and hold on the camera button for approximately 4 secs.
worked for me and surely will work for you too.
Click to expand...
Click to collapse
Doesn't work for me. When i press power + camera phone is booting but when i release camera button phone is turning off and i have to remove battery to start it again. Maybe it's because i have "Samsung" not "Hynix" in Windows Internals
hello
im trying to install os on 520
but in installing progress with side load, installation terminated at 47%
any idea why?
Related
I now know the Allwinner A13 is a stripped down version of the Allwinner A10, to be clearer the specifications of my Tablet (from UniFlash and AnTuTu Benchmark) are as follows:
Manufacturer: None
Brand: softwinners
CPU hardware: sun5i
CPU model: ARMv7 Processor (VFPv3, NEON)
CPU frequency: 60.0 ~ 1008.0 MHz
Screen resolution: 800 x 444
GPU vendor: Mali-400 MP
GPU version (OpenGL): OpenGL ES 2.0
RAM size: 512 MB DDR2 RAM
Knowing this, I used UniFlash to make a backup of the firmware bt after using UniFlash to try and load a CM9 Rom on to the Tablet, the Tablet died. After alot of googling I discovered AllWinner based chipsets use Live Suite (sometimes called LiveSuit) to flash firmwares on to the device.
To Flash firmware on to the device you need to follow the attached instructions ((http://dragondevs.com/viewtopic.php?f=159&t=390):
Download LiveSuite (http://www.softpedia.com/get/System/System-Miscellaneous/Live-Suit-Pack.shtml)
Install Live Suite
Start Live Suite
Select the Live Suite image file (folder icon
Turn device off (to be sure hold power button for 12 - 20 seconds)
Hold "Volume Up" button down
Connect the device to your PC (while still holding "Volume Up" down)
Start pressing the power button (you may need to do this once a second for 5/6 seconds)
If you haven't installed windows will ask to install a driver for a device (Dive Id will be something like Vf73465789123465435_Id, if the device is in the right mode, A13-MID, ADB-Interface indicates the tablet has connected in anouther mode).
Once this has finished LiveSuite will detect the device and a wizard will flash the firmware for you.
I have found a working firmware which according to AnTuTU Benchmark gives my tablet a rating of 3047 (see firmware section), this is on the higher end of reported A13-MID tablets
I have found out how to install CWM on to the device via SaussageMod (http://www.slatedroid.com/topic/29916-scriptmod-for-allwinner-a1x-platforms/). This solution is untested, further more it may be unnessary futher investigation has shown this website (https://www.miniand.com/forums/forums/2/topics/73) has developed a way of create Live Suite images. This is simplier than installing clockworkmod recovery,
I tried to load the following images on to my tablet and failed completely: http://forum.xda-developers.com/showthread.php?p=31043317 It didn't work and forced me to do a firmware refresh.
My other step for the day was to create Ubuntu 10.10 installation then I began following this guide to construct an Xperia Play CM9 Rom/Kernel. once I have created a working ROM (I own an Xperia Play). I'm hoping to be able to modify the kernel to include the relevent A13 drivers, but one step at a time.
TODO
Create Ubuntu Partition
Follow Xperia Play CM9 Rom/Kernel Guide and create working rom (test on my Xperia Play)
Download CT repository (https://github.com/christiantroy) and compare with Xperia Play CM9 rom
Find the relevent drivers from https://github.com/amery/linux-allwinner leaked source
Retrieve offical MALI 400 MP drivers (parts of it have been released) compare with leaked source
Use UniFlash backup of original Rom along with LiveSuite image creation to try and restore original firmware (see If I understand it properly)
Examine Build.prop find out why original firmware displayed ina phone layout and new one is in tablet mode (potentially reference CM supported Tablets).
Attempt to compile a A13 (Sun5i) based rom
Create a google code page to hold all of these thoughts properly.
Left blank will include rom/firmwares here for future reference
Firmware
https://www.dropbox.com/sh/bzjt7mzuftwz79f/nt7mRMPDj1 - My public Dropbox
http://www.azhuo.net/en/products_A13B_Allwinner-A13_7_inch_Android_4.0_Upgrade.html - password is: tabletpc
http://dragondevs.com/viewtopic.php?f=159&t=390 - McPad F1 firmware
Novo 7 Tools
https://dl.dropbox.com/u/74970692/Novotools_v1.0.apk
SausageMod
http://www.slatedroid.com/topic/29916-scriptmod-for-allwinner-a1x-platforms
Gapps - http://goo.im/gapps/
I have the same tablet and it would be very cool if you succeeded in your attempt to create a CM9 rom for it. I tried ROM made by Tragidy from this thread but there is a problem with touchscreen driver, ROM booted successfully but I could not even unlock the screen cause touchscreen did not work. I finaly flashed rom DCPAD2121.zip using livesuite which I belive is the original ROM that came with tablet and it worked.
I installed clockwordmod using sausagemod successfully, but there is a big problem - no hardware "back" key and only volume up works.
novo7tools.apk works OK for reboot, reboot to recovery or shutdown.
syncing
Thanks, it's slow going at the moment, I only spending ~1 hour each day on it and at the moment trying to sync the CM9 source is painful (it keeps timing out, due to "remote side corruption").
I figure I would start there as all the firmware images I can find are ICS roms (meaning the drivers must be ICS).
Hi, I have the same tablet but I cannot find the firwmare DCPAD2121.zip
Could you upload it please? From dropbox has been deleted
Thanks
You should check this topic:
http://forum.xda-developers.com/showthread.php?t=1861445
WillingMagic said:
You should check this topic:
http://forum.xda-developers.com/showthread.php?t=1861445
Click to expand...
Click to collapse
I tried that ROM, on my tablet after flashing the ROM it got stuck in a boot loop. It might be an idea to steal the config he created. The ROM is pre CM9 release. The A10 Flash kitchen software seems to work. I was hoping on producing a complete Live Suit image that people could flash (figuring our what CT has done on the A10 took a while).
Still having fun trying to sync the repositories, given up on trying to use a Debian VM, I'll will install full Ubuntu on a drive tomorrow, hopefully that will help fix things. It doesn't help most of the guides I can find are out of date and I keep having to make corrections.
I've also uploading all firmware I can find to my dropbox (at 200mb each they will take a while), I won't with tools simply because others ask you not too.
The Dropbox firmware was out of date when I tried to download it sun5i_android_a13-pfdq88_en_D06 firmware worked well for me, the firmwares are located at: https://www.dropbox.com/sh/bzjt7mzuftwz79f/nt7mRMPDj1
Cyanogenmod 9 in not working for you. Did you made data and cache wipe? Can you send me logcat and dmesg output?
You can`t steal my config, you have to remember about credits, and other stuff.
Creating a wiki is useless, there is already wiki for allwinner products, so better update info on it.
Github is better than google code to keep sources.
Using Livesuit=Windows, I hate dual booting just for flashing, Clockwork Recovery or modified SDcard with uboot is better solution.
Current kernel is not working well, with sun5i.
Using VM is stupid, because building rom takes a lot of time on quad core pc without it.
WillingMagic said:
Cyanogenmod 9 in not working for you. Did you made data and cache wipe? Can you send me logcat and dmesg output?
You can`t steal my config, you have to remember about credits, and other stuff.
Creating a wiki is useless, there is already wiki for allwinner products, so better update info on it.
Github is better than google code to keep sources.
Using Livesuit=Windows, I hate dual booting just for flashing, Clockwork Recovery or modified SDcard with uboot is better solution.
Current kernel is not working well, with sun5i.
Using VM is stupid, because building rom takes a lot of time on quad core pc without it.
Click to expand...
Click to collapse
I wiped the caches I couldn't send a logcat or dmesg as the device simply boot looped.
I've been providing links to threads whenever I come across others work, I'm new to android rom development for me this is a research effort which will hopefully produce something cool for my £50 tablet. Basically my day job has switched to developing UI's and I am looking for something new to learn (instead of why is Vaadin, Guice, SWT, Javascript, etc... is putting that button there).
Said dev career has also made me hate Git with a passion (not as bad as perforce but still) since Git integrates poorly with Visual Studio and Eclipse and you end up getting everyone overwriting each others changes. The idea of google code is simply because it makes a good platform for projects and you can use things like git with it. I didn't know about an Allwinner wiki, with all of my Googling I haven't come across it, where is it?
I don't care about build times I'm just researching, alas Debian has caused me enough problems so I've installed ubuntu on to a old disk I had lying around. Considering I've just tried to install Ubuntu via a Net install CD and it has screwed up the GRUB installation (nicely taking out my windows partition as well) can you blame me?
The reason for nabbing the config (and the Xperia Play and Christian Troys) is to understand how they work. Over the years I've found most Open Source software documentation is poor unless you have a set level of knowledge about it already.
Lastly I like automation, I want things to just work. Livesuit does that since I am normally a windows user, I as hoping in the distant future once I understand the build process to set up a Jenkins server to do it and create the whole lot automatically (via the Allwinner flash kitchen). In the even longer term I would like to update FlashTool to do what LiveSuit does. In the near term (next couple of months) I just want to be able to build a CM9 image.
All android and kernel source are keep on git, so changing it is stupid.
This is allwinner wiki: http://rhombus-tech.net/allwinner_a10 you can also update http://elinux.org/Hack_A10_devices
Everyone use CWM and it's standard for unofficial firmware/ROMS
brandonlee2 said:
Hi, I have the same tablet but I cannot find the firwmare DCPAD2121.zip
Could you upload it please? From dropbox has been deleted
Thanks
Click to expand...
Click to collapse
Here's my upload, I packed it in rar format: http://www.mediafire.com/?we4zhgop29bg3dj
I also found it here: https://docs.google.com/open?id=0BzQuMwoMQqvba1VtQ1p1ZWJkR2M
from this forum post: http://www.slatedroid.com/topic/35314-a13-generic-tablet/page__view__findpost__p__421128
I built a CM10 rom for A13 from sources. It boots fine but hangs either at the Android setup wizard or sometimes even at the CM animation.
myfluxi said:
I built a CM10 rom for A13 from sources. It boots fine but hangs either at the Android setup wizard or sometimes even at the CM animation.
Click to expand...
Click to collapse
Mind sharing your repo ?
Trying 4.1.2
Hi all,
So I've tried compiling from 4.1.2 source for my A13 Emgeton Consul 3
It boots up and gets to the CM10 boot animation but it doesn't get past it.
I can adb at first boot until adb stops.
logcat from boot attempt:
http://pastebin.com/gLTrieHm
My build.prop:
http://pastebin.com/Ap9M1tjW
Any pointers as to why it doesn't get past the boot animation?
Hello guys! I know it's not he proper place here to pose my question, but I am definitely at loss!
Do you happen to know if there is a way of rooting this tablet? And if so, does everything work properly after that?
phoivos86 said:
Hello guys! I know it's not he proper place here to pose my question, but I am definitely at loss!
Do you happen to know if there is a way of rooting this tablet? And if so, does everything work properly after that?
Click to expand...
Click to collapse
Mine came pre-rooted.
Just received my MID A13 Tablet. Is this thread dead?
koodiifin said:
Just received my MID A13 Tablet. Is this thread dead?
Click to expand...
Click to collapse
I've gone a bit quiet on the development front, setting up a file/media server & samba domain server to power my home network is eating up my time.
My dropbox contains every image I could find for the tablet, as mentioned previously you can root the device using saussage mod, although my device and every one of those images is already rooted. You can prove this by installing super user.
Sassage mod's clockworkmod recovery doesn't work for me and I was looking at the backup tool in order to generate my own one. If you are aimed at any development, let me know and I will update the main thread
Many have said that they have "lost" "forget" to take backup from original rom. So, i'd like to have backup from my original to go back if/when something goes wrong. How do i do that? What software i need. Do i need to root?
This is from my info sheet:
Model TWD_MID
android version 6.0.1 ?????
Baseband 1.5
Kernel 3.0.8+
Buildnumber: nuclear_evb-eng6.0.1 IMM76D 20120917 test keys
I am in a desperate need for some help:
My tablets specs are these:
Phone model: A13-MID
Brand: softwinners
CPU hardware: sun5i
CPU model: ARMv7 Processor (VFPv3.NEON)
CPU frequency: 60.0 - 1008.0 MHz
Screen Resolution: 800 x 444
GPU vendor: ARM
GPU render: Mali-400 MP
GPU version (OpenGL): OpenGL ES 2.0
Memory size: 353.5 MB
Android version: 4.0.4
Build number: nuclear_pfdq88c-eng 4.0.4 IMM76D 20120821 test-keys
Kernel: Linux version 3.0.8+
I just installed OpenVPN installer and installed the OpenVPN binary in the system/xbin
After that I tried to connect to my university's VPN but when it tried to connect, the tablet lost wifi connection and ever since it doesnt connect to any available wifi network!! I manually deleted the OpenVPN binary, but problem remains!
Do you know where could I find the stock ROM for this tablet in order to re-flash it?
Do you have any other proposals? Anything will help!
Thank you very much!!
My allwinner A10 tablet came pre-rooted or so I thought. I installed CWM v6.1.0.2 via the terminal emulator but wasn't able to reboot back to my OS.
I then wiped cache partition and wiped data, it would not allow me to wipe the dalvik cache.
At the end of each process I see:
E:Can't mount /cache/recovery/log
E:Can't mount/cache/recovery/log
Also for /last-log of the two above.
I have got an A10 cm10 rom which I have tried to install via the external sd but no luck.
Any help would be appreciated as I have no clue what I can do next.
Do you know the model or make of your device? What are all of the specs? If you have that information I can probably lead you to a support forum for your device.
I recently recovered my A10 device flashing a .img of a totally different A10 tablet and most of my tablets features work. I tried flashing 100 other .img files and none of those worked correctly.
Where did you get that CWM file? Was it CWM that was specific for A10 devices? You can't just flash any recovery to your device and expect it to work.
Your issue is likely that the CWM is not for your device or it's just having issues with your device. I'm using CWM 6.0.1.1 for Allwinner A10 ICS. I got it onto my device using a simple one click method, but in order for you to use it you have to be on a rom that at least boots up with the display working.
Once you give me information on your device I can try searching for some .img files for you to flash onto your device with Livesuit. If you're lucky enough you'll get one that is specific for your device, if your not so lucky you're going to be breaking your head trying to find a rom that at least boots up with most features working. It's a lesson learned, don't mess with your device unless you have the necessary resources as a backup in the event that something goes wrong.
Hi, thanks for the reply, unfortunately I don't know the make. When it is connected to the PC it shows as BC1077. It came in a completely unmarked box. Here are the specs:
• 10-inch TFT LCD capacitive touch screen
• 1024 x 800 pixels display resolution
• Android 4.0 operating system
• CPU: Allwinner A10 1.5GHz
• RAM: DDR III 1GB
• WiFi: 54Mbps 802.11B/G
• Lan: 10/100M Ethernet Access
• Built-in Micro-SD card slot up to 32GB
• Built-in G-Sensor
• Supports external 3G devices.
• Built-in 1.3 megapixels digital camera
• Built-in 8GB memory
• Plays AVI,RM/ RMVB,FLV,MPG4 - 1,MPEG – 2 video format files
• Plays MP3,WMA,AAC,AC3,WAV audio format files
• Picture browsing of JPEG,BMP,GIF,PNG,TIFF format files
• Built-in 7000mAh Li-poly battery
• 3.5mm earphone socket
• 1 x USB ports
. 1 x Mini USB port
. 1x HDMI port
. Watt speakers
• Android keyboard and Google keyboard input
• Multi-language support
. Battery Life: 6-8 Hours
I got the CWM 6.0.1.2 from here it was meant to be specific to A10's.
Problem is I have no drivers so I cannot see it in windows either.
karlos65 said:
Hi, thanks for the reply, unfortunately I don't know the make. When it is connected to the PC it shows as BC1077. It came in a completely unmarked box. Here are the specs:
• 10-inch TFT LCD capacitive touch screen
• 1024 x 800 pixels display resolution
• Android 4.0 operating system
• CPU: Allwinner A10 1.5GHz
• RAM: DDR III 1GB
• WiFi: 54Mbps 802.11B/G
• Lan: 10/100M Ethernet Access
• Built-in Micro-SD card slot up to 32GB
• Built-in G-Sensor
• Supports external 3G devices.
• Built-in 1.3 megapixels digital camera
• Built-in 8GB memory
• Plays AVI,RM/ RMVB,FLV,MPG4 - 1,MPEG – 2 video format files
• Plays MP3,WMA,AAC,AC3,WAV audio format files
• Picture browsing of JPEG,BMP,GIF,PNG,TIFF format files
• Built-in 7000mAh Li-poly battery
• 3.5mm earphone socket
• 1 x USB ports
. 1 x Mini USB port
. 1x HDMI port
. Watt speakers
• Android keyboard and Google keyboard input
• Multi-language support
. Battery Life: 6-8 Hours
Problem is I have no drivers so I cannot see it in windows either.
Click to expand...
Click to collapse
Okay, if we both search we'll find the device faster.
Go to the following link and try to find your device or a device with similar specs: http://www.slatedroid.com/forum/274-allwinner-a10-cpu-devices/
Android1993 said:
Okay, if we both search we'll find the device faster.
Go to the following link and try to find your device or a device with similar specs: http://www.slatedroid.com/forum/274-allwinner-a10-cpu-devices/
Click to expand...
Click to collapse
Again thanks for the help, where is the spec for all the models on those pages?
karlos65 said:
Again thanks for the help, where is the spec for all the models on those pages?
Click to expand...
Click to collapse
To be honest it's just a long search through each tablets board to find a post that lists the specs. I'm realizing that's a big headache.
I personally just flashed random A10 images onto my device. Nothing bad seemed to happen to my device, but I'm not sure if the same is going to apply to you. If you feel like taking the chance you can just flash some images and cross your fingers hoping it doesn't do anything to your device. When I did it the worst that happened was that the roms either didn't display anything, displayed a static image, display was off center, touch controls didn't work, or got stuck at boot screen, then one finally worked.
I can try to link you to some A10 firmware images and LiveSuitPack if you want to take the chance.
Android1993 said:
To be honest it's just a long search through each tablets board to find a post that lists the specs. I'm realizing that's a big headache.
I personally just flashed random A10 images onto my device. Nothing bad seemed to happen to my device, but I'm not sure if the same is going to apply to you. If you feel like taking the chance you can just flash some images and cross your fingers hoping it doesn't do anything to your device. When I did it the worst that happened was that the roms either didn't display anything, displayed a static image, display was off center, touch controls didn't work, or got stuck at boot screen, then one finally worked.
I can try to link you to some A10 firmware images and LiveSuitPack if you want to take the chance.
Click to expand...
Click to collapse
If I knew how to do it I could persevere trying different images, how easy is it?
karlos65 said:
If I knew how to do it I could persevere trying different images, how easy is it?
Click to expand...
Click to collapse
It's very simple actually.
Here's the LiveSuitPack tool: http://www.topnotchtablets.com/LivesuiteInstall
Here's the guide for installing firmware: http://www.topnotchtablets.com/A10Firmware
In the guide for installing firmware substitute the menu button for volume down button if you don't have a menu button.
There are two firmwares to download on the firmware installation guide page, although I don't think either of those will work at all to begin with. Try them if you'd like. Give me a few minutes to boot into my other partition so I can get all the links of images I bookmarked.
Android1993 said:
It's very simple actually.
Here's the LiveSuitPack tool: http://www.topnotchtablets.com/LivesuiteInstall
Here's the guide for installing firmware: http://www.topnotchtablets.com/A10Firmware
In the guide for installing firmware substitute the menu button for volume down button if you don't have a menu button.
There are two firmwares to download on the firmware installation guide page, although I don't think either of those will work at all to begin with. Try them if you'd like. Give me a few minutes to boot into my other partition so I can get all the links of images I bookmarked.
Click to expand...
Click to collapse
So the drivers are in the folder? for each particular tablet image.
karlos65 said:
So the drivers are in the folder? for each particular tablet image.
Click to expand...
Click to collapse
No, once you download the Livesuitpack you're going to open the folder and run LiveSuitPack_v1.07. That'll install some drivers, or it'll ask you if you want to install some drivers, click Yes. From there you're going to run the LiveSuit application. Then you follow the steps for getting the new firmware onto your device.
EDIT: The drivers that the Livesuitpack installs onto your computer also make your device recognizable in ADB (if you know what that is and ever have a use for it). I also couldn't find drivers for my device for the longest and these seem to work at making your device recognizable across your computer.
---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------
Firmware:
This is the one that worked on my tablet, doubt it'll work on yours: http://www.ele-china.com/soft/tablet/7inchA10/
This has a good bunch of them: http://www.tikkitoo.com/Firmware-Downloads
Another one I tried: http://androidtabletfirmware.com/firmware_details=MzE5LTEzMzI5MDkxNzAwNzAxNDkyMDU2
This is a forum thread linking to a bunch of websites with firmware for A10 devices: http://www.techknow.t0xic.nl/forum/index.php?topic=3807.0
That's a huge portion of the places I searched and the ones I tried. I'll update the post if I find anymore.
Android1993 said:
No, once you download the Livesuitpack you're going to open the folder and run LiveSuitPack_v1.07. That'll install some drivers, or it'll ask you if you want to install some drivers, click Yes. From there you're going to run the LiveSuit application. Then you follow the steps for getting the new firmware onto your device.
---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------
Firmware:
This is the one that worked on my tablet, doubt it'll work on yours: http://www.ele-china.com/soft/tablet/7inchA10/
This has a good bunch of them: http://www.tikkitoo.com/Firmware-Downloads
Another one I tried: http://androidtabletfirmware.com/firmware_details=MzE5LTEzMzI5MDkxNzAwNzAxNDkyMDU2
This is a forum thread linking to a bunch of websites with firmware for A10 devices: http://www.techknow.t0xic.nl/forum/index.php?topic=3807.0
That's a huge portion of the places I searched and the ones I tried. I'll update the post if I find anymore.
Click to expand...
Click to collapse
I can't thank you enough for your help.
I will update here on any progress I make.
Once again many thanks, karma owes you one.
karlos65 said:
I can't thank you enough for your help.
I will update here on any progress I make.
Once again many thanks, karma owes you one.
Click to expand...
Click to collapse
No need to thank anymore than you already have. I've been helped around here plenty of times by some sincere people. It's all about giving back what you receive. I hope everything goes well with your tablet as it did mine, and be careful, don't want anything getting messed up on you. Good luck.
Android1993 said:
No need to thank anymore than you already have. I've been helped around here plenty of times by some sincere people. It's all about giving back what you receive. I hope everything goes well with your tablet as it did mine, and be careful, don't want anything getting messed up on you. Good luck.
Click to expand...
Click to collapse
No luck so far, I flashed one image which gave me a sort of cracked looking screen affect, other images I have tried to flash do not make it to 100%?
I am not sure if I have now completely bricked it?
I am still looking for images that closely match my pad and will try again this evening.
karlos65 said:
No luck so far, I flashed one image which gave me a sort of cracked looking screen affect, other images I have tried to flash do not make it to 100%?
I am not sure if I have now completely bricked it?
I am still looking for images that closely match my pad and will try again this evening.
Click to expand...
Click to collapse
Your device shouldn't brick. I believe A10 devices have all necessary code in the chip itself, or something along those lines. The cracked looking screen effect means that it isn't compatible with your device, I came across plenty of roms that did that to my device, all you do if flash the next image.
I haven't come across any issues with it not getting to 100%. I can only suggest you retry it, or move on to the next image.
karlos65 said:
My allwinner A10 tablet came pre-rooted or so I thought. I installed CWM v6.1.0.2 via the terminal emulator but wasn't able to reboot back to my OS.
I then wiped cache partition and wiped data, it would not allow me to wipe the dalvik cache.
At the end of each process I see:
E:Can't mount /cache/recovery/log
E:Can't mount/cache/recovery/log
Also for /last-log of the two above.
I have got an A10 cm10 rom which I have tried to install via the external sd but no luck.
Any help would be appreciated as I have no clue what I can do next.
Click to expand...
Click to collapse
Iv got similar problems with my BC1077. Iv been trying to fix it for the last few days. Im not 100% sure, but I think the problem Iv quoted above is that CWM does not support jellybean, so it wont work with cm10, which is jellybean.
Over the last few days Iv flashed 40+ A10 firmwares to my tablet, but Iv only found 1 that installs properly and boots for me. It actually works pretty well, only major issue iv noticed is auto rotate doesnt work. But this same working firmware is also jellybean, after I install CWM I get bootloops and have to reflash the firmware again to boot.
Heres a link to the firmware that works for my BC1077 - http://www.ssb-repair.com/Firmwares/Cherry/M1007_20121217.zip
Its for a completly different tablet (Cherry Mobility - M007), but like I said it works on mine.
Heres another firmware it might be worth you trying to flash, its the only BC1007 specific firmware Iv found, but it wont install on my tablet, I always get a 0x162 error from it. Heres the link - http://www.pandawillforum.com/soft/mate sku20314 firmware for May 25 stock.rar
Good luck, let us know if you make any progress.
I think I might have been flashing with a very low battery, if a flash was unsuccessful halfway through would this not brick the tablet.
I am not getting any kind of response from the screen at all and when I try to flash although the drivers appear to load the % bar doesn't go up.
col888 said:
Iv got similar problems with my BC1077. Iv been trying to fix it for the last few days. Im not 100% sure, but I think the problem Iv quoted above is that CWM does not support jellybean, so it wont work with cm10, which is jellybean.
Over the last few days Iv flashed 40+ A10 firmwares to my tablet, but Iv only found 1 that installs properly and boots for me. It actually works pretty well, only major issue iv noticed is auto rotate doesnt work. But this same working firmware is also jellybean, after I install CWM I get bootloops and have to reflash the firmware again to boot.
Heres a link to the firmware that works for my BC1077 - http://www.ssb-repair.com/Firmwares/Cherry/M1007_20121217.zip
Its for a completly different tablet (Cherry Mobility - M007), but like I said it works on mine.
Heres another firmware it might be worth you trying to flash, its the only BC1007 specific firmware Iv found, but it wont install on my tablet, I always get a 0x162 error from it. Heres the link - http://www.pandawillforum.com/soft/mate sku20314 firmware for May 25 stock.rar
Good luck, let us know if you make any progress.
Click to expand...
Click to collapse
Thanks for that, I will try tonight and get back.
OK, regardless of the image I try to flash the livesuit progress bar gets to 3% and then goes back to 0% and then nothing.
Anyone?
If the battery was low and the flashing process didn't finish all you have to do is load up the exact image that didn't finish flashing into LiveSuit and put your tablet into download mode and let it do its thing. I had the same problem and got scared my tablet was bricked, so I just did the process I stated above and it finished. It wouldn't allow me to flash another rom, I'd get the little Livesuit pop up that you get after a rom successfully flashes, so if that's the same pop up you're getting don't be alarmed.
karlos65 said:
I think I might have been flashing with a very low battery, if a flash was unsuccessful halfway through would this not brick the tablet.
I am not getting any kind of response from the screen at all and when I try to flash although the drivers appear to load the % bar doesn't go up.
Click to expand...
Click to collapse
I dont think your tablet is bricked, if it was I doubt it would respond to Live Suite or PheonixUSB pro at all. From what Iv read about the A10 its meant to be unbrickable.
What error codes does live suite/pheonixUSB give you when they stop?
if youre getting 0x120 and 0x162 errors, just keep trying more firmwares out till you find one that will install without errors.
Theres loads of A10 Allwinner firmwares at this link - http://androidtabletfirmware.com/firmware_search/order=2/sort=1
Hello here i post you Lumia 920 win10 10.0.10586.36 build, for flashing with WPInternals, you need lastes win8.1 and unlocked bootloader.
Extract the RAR and flash separate partitions . ROM is Root Acces enabled..
Is windows mobile
Download link: https://mega.nz/#!IsAFkIRa!BL0KOPfFAXSrUGtwf4dgCgh4jogmCvXz7RRchGBaT_E
Any ROM like this for Lumia 625 RM-941?
Rivo17 said:
Any ROM like this for Lumia 625 RM-941?
Click to expand...
Click to collapse
Follow this and created it :
http://forum.xda-developers.com/windows-phone-8/development/windows-phone-internals-unlock-t3257483
question
Does this build have project astoria in it ?
Didn't work for me, all went through but the phone got stuck in the Nokia Logo, I had to do emergency recovery and flash stock rom again. Do you still have the 10.0.10586.36 ffu?
Why do we need this? Is it not just possible to follow the instructions on WPinternals?
flash 8.1 FFU
run windows update to latest version 8.10.14219.341
unlock bootloader with engineering SBL3
run windows insider, update to win10
enable root
Click to expand...
Click to collapse
Now that Microsoft does not update +- 35% of their phones to windows 10
twitter.com/windowsinsider/status/710549849406513152
Is there a way that we can port android or any other os on it to protest?
tiwtik said:
Now that Microsoft does not update +- 35% of their phones to windows 10
twitter.com/windowsinsider/status/710549849406513152
Is there a way that we can port android or any other os on it to protest?
Click to expand...
Click to collapse
But doesn't 920 have 1 Gig of RAM? So it should get the upgrade, maybe later on, like these germans say: http://www.computerbild.de/artikel/cb-Tipps-Handy-Windows-10-mobile-Lumias-Update-14148579.html
sicko78 said:
But doesn't 920 have 1 Gig of RAM? So it should get the upgrade, maybe later on, like these germans say:
Click to expand...
Click to collapse
I really hope that the 1GB phones will get WM 10, it is running fine on my 920. But I would like to make a statement to Microsoft, they promised WM10 and now...
When I look at the official website, (microsoft.com/nl-nl/windows/windows-10-specifications) (Select the mobile tab)
This is being told:
Phones and devices compatible for WM10:
Lumia 1520, 930, 640, 640XL, 730, 735, 830, 532, 535, 540, 635 1GB, 636 1GB, 638 1GB, 430, 435, BLU Win HD w510u, BLU Win HD LTE x150q, MCJ Madosma Q501
So if it is true, can we port any other up-to date OS to the not supported phones? Sailfish would be the ultimate payback.
I can't seem to download the file, it just jams. I can download any other file from Mega but not this one. Do you possibly have another file, maybe the 1 you posted is corrupt.
Thanks
I know w10m is the latest and all the goodies it has, but on my 920 and in my father's 820 doesn't work too good. I'm thinking we could get the wp8.1 update 2 to get the keyboard support, but I can't get it through the insider program. Could we get it from a phone that has is and create a rom for our phone?
skyleth said:
I know w10m is the latest and all the goodies it has, but on my 920 and in my father's 820 doesn't work too good. I'm thinking we could get the wp8.1 update 2 to get the keyboard support, but I can't get it through the insider program. Could we get it from a phone that has is and create a rom for our phone?
Click to expand...
Click to collapse
Win10 works very well on lumia 920 i have the stable version 10586.164 official installed and works well this build is very old lastest build is dredstone one and work very good, or just 164 official one
werty100 said:
Win10 works very well on lumia 920 i have the stable version 10586.164 official installed and works well this build is very old lastest build is dredstone one and work very good, or just 164 official one
Click to expand...
Click to collapse
I have that one installed in my 920 and in my father's 820. Battery life sucks and sometimes you have to reset the phone by pressing power + vol-, and calendar doesn't allow you to see more than one month at the same time. I don't see any advantage in w10m to make me move from wp8.1 other than the bluetooth keyboard (and selfiestick) support. That's why I was asking for the wp8.1 u2 since that one introduced the bt kb support. I've seen your post at htcmania, I might try your rom, wiping everything and doing a clean install, but from what I heard, battery life would be worse than wp8.1
Sadly bootloop no way to get this installed! :/ tried both roms! SUCKS all that time I spend extracting those files....
bootloop...
and what's interesting flashing didn't even replace a provider logo — any ideas why?
Nailyouh said:
Sadly bootloop no way to get this installed! :/ tried both roms! SUCKS all that time I spend extracting those files....
Click to expand...
Click to collapse
hstn said:
bootloop...
and what's interesting flashing didn't even replace a provider logo — any ideas why?
Click to expand...
Click to collapse
They blocked this method sorry maybe when a new update of the tool we used for unlooking we can use the roms
boot loop, here too.
I am flasing older software
what do you mean by they blocked this method.
thanks
mmmalas said:
boot loop, here too.
I am flasing older software
what do you mean by they blocked this method.
thanks
Click to expand...
Click to collapse
This method was working well but microsoft block it i think because for my works before and now no
Can someone upload a W10 ROM for the Lumia 920, with unlocked loader and root access. The one on this thread flashes on the phone without any errors using windows phone internals, but goes into a boot loop with the Nokia logo..
I retried the flash and did a hard reset using the details below, after it went into the Nokia Boot loop. The phone reset in about 10-15 minutes with TWO reloads and started working with Windows 10 Great. Updates downloading.....
Factory reset
With the phone turned off press and hold the Volume DOWN key and then connect the charger.
An exclamation mark should now appear.
Now press the following buttons in the exact order: Volume UP, Volume DOWN, POWER then Volume DOWN
This will now fully reset the device and restore it to factory defaults........
Hello,
So I can't connect SG S2 I9100 to pc (USB device not recognized). Is there any way to install Android 7.0 or any stable (possibly newer) version without using PC?
The reason why I want to install custom rom is because my phone is having issues. It laggs, boots up much longer, (more than 2 min with several vibrations) when it boots up it says "Trebuchet stopped working, Force close, Report", Play store crashes same way, performance is low...
OS: CM12.1 - Android 5.1.1
Model: GT-I9100
CyanogenMod version: 12.1-20160202-NIGHTLY-i9100
Recovery: CyanogenMod Recovery
For the installation of Lineage OS 14.1 the guide says re-PIT (repartition?) was necessary. Is there any guide how to do that? I found one way with code editing, but that seems too risky.
*I have read every post I could find in spite of fixing my problem, but in most cases PC connection is necessary.
Thanks in advance!
PHP will not allow you to CP this.
developer11 said:
PHP will not allow you to CP this.
Click to expand...
Click to collapse
PHP? CP?
What does it mean?
When you download ISO you let asses know you download ISO
Meaning that everyone with RS$ can maxout your sensitive data. Its bad. So you have to get ISO straight from manufacturer. This is only when you have 100% guarantee that ISO is not modified.
developer11 said:
When you download ISO you let asses know you download ISO
Meaning that everyone with RS$ can maxout your sensitive data. Its bad. So you have to get ISO straight from manufacturer. This is only when you have 100% guarantee that ISO is not modified.
Click to expand...
Click to collapse
What is RS$?
I bought a BLU Vivo ONE from Best Buy the other day and was able to purge most of the adware through the typical adb shell methodology to disable it for the currently running user without physically removing it from the device. However, it still has some really nasty hangups, like secretly blocking Netflix from accessing the remote server in an attempt to push the Amazon Prime Video app that it shipped with. Do we have any idea what this phone is a knock off of? I'd like to get my hands on an original pristine firmware from a non-advertisement subsidized version of this phone and flash that with SP Flash Tool. I did find the scatter file for the BLU Vivo ONE Plus which is also an MT6739 with a slightly bigger screen, etc. and was able to take a backup using SP Flash Tool. I would like to get TWRP or something on there so that I can flash Magisk as a starting point, but ultimately a non-ad subsidized firmware would be ideal. I haven't had an android phone since the original Droid Incredible, so this is all new to me again. Also, the phone is running Nougat 7.1.1.
Alright, Netflix is working fine now for some reason, but it's still not rooted yet. Any ideas on how to root this phone? Does the community avoid the MT6739 for some reason?
illuminarok said:
Alright, Netflix is working fine now for some reason, but it's still not rooted yet. Any ideas on how to root this phone? Does the community avoid the MT6739 for some reason?
Click to expand...
Click to collapse
I have the one plus. Any idea how to root?
illuminarok said:
I did find the scatter file for the BLU Vivo ONE Plus which is also an MT6739 with a slightly bigger screen, etc. and was able to take a backup using SP Flash Tool. I would like to get TWRP or something on there so that I can flash Magisk as a starting point, but ultimately a non-ad subsidized firmware would be ideal. I haven't had an android phone since the original Droid Incredible, so this is all new to me again. Also, the phone is running Nougat 7.1.1.
Click to expand...
Click to collapse
About TWRP question:
1- is need anyone with experience (or courage to do) to flash stock files with SPFT.
I saw that you were able to do a backup with SPFT. Then you will be able to flash the test file.
2- is need know if need unlock bootloader or not.
The first moment NO UNLOCK! If the file test not boot so is need Unlock to know if work file test.
3- I not need phone in my hands. But is very easy and fast solving issues when have its.
Because is more easy to repair phone if anything wrong happens. So the risk and responsability is of the user!!
Specifications Vivo One V0270WW
Dimensions: 70.2 x 148.4 x 9.8 mm
Weight: 162 g
SoC: MediaTek MT6739
CPU: ARM Cortex-A53, 1300 MHz, Cores: 4
GPU: PowerVR GE8100, 570 MHz
RAM: 2 GB, 667 MHz
Storage: 16 GB
Memory cards: microSD, microSDHC, microSDXC
Display: 5.5 in, IPS, 720 x 1440 pixels, 24 bit
Battery: 3000 mAh, Li-Polymer
OS: Android 7.0 Nougat
Camera: 4032 x 3024 pixels, 1920 x 1080 pixels, 30 fps
SIM card: Nano-SIM, Nano-SIM / microSD
Wi-Fi: b, g, n, Wi-Fi Hotspot
USB: 2.0, Micro USB
Bluetooth: 4.0
Positioning: GPS, A-GPS
Stock ROM: BLU_V0270WW_V7.1.1.04.01_REPAIR.rar (1.7GB)
thanks to William Smith
If anyone can try flashing the TWRP test file so PM me and I can create its!
van131 said:
I have the one plus. Any idea how to root?
Click to expand...
Click to collapse
Update
Specifications Vivo One Plus V0290WW
Dimensions: 76.7 x 164.8 x 8.6 mm
Weight: 173 g
SoC: MediaTek MT6739
CPU: ARM Cortex-A53, 1300 MHz, Cores: 4
GPU: PowerVR GE8100, 570 MHz
RAM: 2 GB, 667 MHz
Storage: 16 GB
Memory cards: microSD, microSDHC, microSDXC
Display: 6 in, IPS, 720 x 1440 pixels, 24 bit
Battery: 4000 mAh, Li-Polymer
OS: Android 7.0 Nougat
Camera: 4160 x 3120 pixels, 1920 x 1080 pixels, 30 fps
SIM card: Nano-SIM, Nano-SIM / microSD
Wi-Fi: b, g, n, Wi-Fi Hotspot
USB: 2.0, Micro USB
Bluetooth: 4.0
Positioning: GPS, A-GPS
Stock ROM:
BLU_V0290WW_V7.1.1.04.03_GENERIC_08-06-2018_19-02.rar (1.21GB)
thanks to William Smith
___________________________________________-
I cannot find the Vivo One Plus stock ROM. So you need make the backup directly from your phone!!
If you know so.... But if you not know, ask illuminarok to do.
After that we make something for your phone. Remember, before anything, we need know if the kernel is same or not!
That's more security!!
I also have a "One Plus", which is apparently a BestBuy exclusive. It seems to be pretty much identical to the "One" but with larger screen and battery. I may have the courage to do some experimentation if properly guided. I sure would like to root this bad boy!
lopestom said:
About TWRP question:
1- is need anyone with experience (or courage to do) to flash stock files with SPFT.
I saw that you were able to do a backup with SPFT. Then you will be able to flash the test file.
2- is need know if need unlock bootloader or not.
The first moment NO UNLOCK! If the file test not boot so is need Unlock to know if work file test.
3- I not need phone in my hands. But is very easy and fast solving issues when have its.
Because is more easy to repair phone if anything wrong happens. So the risk and responsability is of the user!!
Specifications Vivo One V0270WW
Dimensions: 70.2 x 148.4 x 9.8 mm
Weight: 162 g
SoC: MediaTek MT6739
CPU: ARM Cortex-A53, 1300 MHz, Cores: 4
GPU: PowerVR GE8100, 570 MHz
RAM: 2 GB, 667 MHz
Storage: 16 GB
Memory cards: microSD, microSDHC, microSDXC
Display: 5.5 in, IPS, 720 x 1440 pixels, 24 bit
Battery: 3000 mAh, Li-Polymer
OS: Android 7.0 Nougat
Camera: 4032 x 3024 pixels, 1920 x 1080 pixels, 30 fps
SIM card: Nano-SIM, Nano-SIM / microSD
Wi-Fi: b, g, n, Wi-Fi Hotspot
USB: 2.0, Micro USB
Bluetooth: 4.0
Positioning: GPS, A-GPS
Stock ROM: BLU_V0270WW_V7.1.1.04.01_REPAIR.rar (1.7GB)
thanks to William Smith
If anyone can try flashing the TWRP test file so PM me and I can create its!
I cannot find the Vivo One Plus stock ROM. So you need make the backup directly from your phone!!
If you know so.... But if you not know, ask illuminarok to do.
After that we make something for your phone. Remember, before anything, we need know if the kernel is same or not!
That's more security!!
Click to expand...
Click to collapse
Instructions for install TWRP
Update 18-10-13
TWRP for BLU Vivo ONE - V0270WW (MT6739) was done!
Requirements: Stock ROM V7.1.1.04.04
WARNING:
Code:
Before install TWRP, copy with application backup&restore all
contacts, msgs, calls, all that you want, etc.... to your PC
and after you can restore that with same application.
After install TWRP is need copy SuperSu or Magisk to
your Internal Storage or MicroSDCard. So after that
you can install SuperSu or Magisk to start ROM.
You need unlock bootloader by adb-fastboot. Follow this intructions => SIMILAR BOOTLOADER UNLOCK
Obviously you should know about the issue that unlocking the bootloader there will be a full reset on the phone.
You can flash TWRP with adb-fastboot or SPFT: Instructions for Flash stock recovery or Custom recovery MEDIATEK devices only
In addition, after installing TWRP you must choose the WIPE-FORMAT DATA option so that Custom Recovery can "see" the MicroSD card. Then there will be a total reset on the phone.
Thanks to tester angel martinez martinez from G+.
______________________________________
Update post #4: I not know if the file is the ROM so need confirm:
______________________________________
I sent you a private message. If you can answer in hangouts it will be good!
damnmachine said:
I also have a "One Plus", which is apparently a BestBuy exclusive. It seems to be pretty much identical to the "One" but with larger screen and battery. I may have the courage to do some experimentation if properly guided. I sure would like to root this bad boy!
Click to expand...
Click to collapse
lopestom said:
You need unlock bootloader by adb-fastboot. Follow this intructions => SIMILAR BOOTLOADER UNLOCK
Click to expand...
Click to collapse
Are you saying that unlocking the bootloader for the Blu Vivo One is as simple as using adb to issue the command: fastboot oem unlock? If so, I can pick one up cheap to play with.
PLZ Help
Hi guys, im new here but not so new in this world of androids and stuff, I´ve flash and successfully various androids but now i dont know what happen... Im from Venezuela so sorry for my english, I know it´s not the best jeje...
First of all, A client bring me this phone (Blu One Vivo - V0270WW) with problemas in the back camera, when she enters in the camera aplicattion, automatically it opens the front camera whithout opcion of change it, even the "flash" button appears xd, it´s like the software thinks that he is in the back camera but shows you the front camera.
Seeing this I went to Download the correct firmware for this phone, wich casually is the same one than the link commented post above me. I download the last SP Flash Tool (5.1836) opened the scatter file, remove the opcion of preloader (automatically the programs set in download only) with the correct drivers so I press the start button, power off the phone, coneccted and everything seems right in the flash procedure, when ended I see that the normal reboot dont occurred, seeing this i try to turn it on by the regular way, with the button, but nothing happen...
Now the phone it´s totally black, when I connect it to the battery the light of charging tuns on but nothing else, nothing on the screen. If i conect the phone into my pc the drivers appears but it conects and disconnect between 2-3 minutes the flash tool recieve information from the chip, it seems that the firmware doesnt work right... I dont know plz help me guys x_x :crying::crying::crying:
Yeap... That's simple!
mn1968 said:
Are you saying that unlocking the bootloader for the Blu Vivo One is as simple as using adb to issue the command: fastboot oem unlock? If so, I can pick one up cheap to play with.
Click to expand...
Click to collapse
May be the hardware problem. If you can't solve with software stock ROM.
Other way: open the back piece in the phone for look if any camera have disconnected part. Generally users drop the phone....
Qamalion said:
First of all, A client bring me this phone (Blu One Vivo - V0270WW) with problemas in the back camera, when she enters in the camera aplicattion, automatically it opens the front camera whithout opcion of change it, even the "flash" button appears xd, it´s like the software thinks that he is in the back camera but shows you the front camera.
Click to expand...
Click to collapse
You can using the preloader without problem. The point is not using FORMAT+FIRMWARE UPGRADE or FORMAT+DOWNLOAD options!!
Qamalion said:
Seeing this I went to Download the correct firmware for this phone, wich casually is the same one than the link commented post above me. I download the last SP Flash Tool (5.1836) opened the scatter file, remove the opcion of preloader (automatically the programs set in download only)....
Click to expand...
Click to collapse
You can flash stock ROM again and pressing constantly the POWER+VOL+(-) or only POWER or only VOL+(-).
Look if battery can charge. That's important to preloader connect phone with PC. You can using DOWNLOAD and/or FIRMWARE UPGRADE options.
Other way, but no good: FORMAT+ (options).... But tge phone can lost IMEIs!
Qamalion said:
Now the phone it´s totally black, when I connect it to the battery the light of charging tuns on but nothing else, nothing on the screen. If i conect the phone into my pc the drivers appears but it conects and disconnect between 2-3 minutes the flash tool recieve information from the chip, it seems that the firmware doesnt work right... I dont know plz help me guys x_x :crying::crying::crying:
Click to expand...
Click to collapse
Sent from my BLUBOO Xtouch using XDA Labs
Done!!!!
Done!! Casually, I select firmware upgrade with all the files selected, click on start button, connect the phone and the process star with total normality, when it ends I see that, again, the normal reboot doesnt ocurred, so i went to press the power button and the phone starts with total normality. Really Really grateful with you, and yes, It´s a hardware problem, the problem with the camera continues
lopestom said:
May be the hardware problem. If you can't solve with software stock ROM.
Other way: open the back piece in the phone for look if any camera have disconnected part. Generally users drop the phone....
You can using the preloader without problem. The point is not using FORMAT+FIRMWARE UPGRADE or FORMAT+DOWNLOAD options!!
You can flash stock ROM again and pressing constantly the POWER+VOL+(-) or only POWER or only VOL+(-).
Look if battery can charge. That's important to preloader connect phone with PC. You can using DOWNLOAD and/or FIRMWARE UPGRADE options.
Other way, but no good: FORMAT+ (options).... But tge phone can lost IMEIs!
Sent from my BLUBOO Xtouch using XDA Labs
Click to expand...
Click to collapse
lopestom said:
May be the hardware problem. If you can't solve with software stock ROM.
Other way: open the back piece in the phone for look if any camera have disconnected part. Generally users drop the phone....
You can using the preloader without problem. The point is not using FORMAT+FIRMWARE UPGRADE or FORMAT+DOWNLOAD options!!
You can flash stock ROM again and pressing constantly the POWER+VOL+(-) or only POWER or only VOL+(-).
Look if battery can charge. That's important to preloader connect phone with PC. You can using DOWNLOAD and/or FIRMWARE UPGRADE options.
Other way, but no good: FORMAT+ (options).... But tge phone can lost IMEIs!
Click to expand...
Click to collapse
I have the twrp on my vivo one...my question is if I do a format -data it wipes my internal storage and I can't find the SuperSU zip to flash next. If I reboot the phone the recovery is replaced with stock. Of course my isn't rooted. Help!!!
Plumbwildz said:
I have the twrp on my vivo one...my question is if I do a format -data it wipes my internal storage and I can't find the SuperSU zip to flash next. If I reboot the phone the recovery is replaced with stock. Of course my isn't rooted. Help!!!
Click to expand...
Click to collapse
Obviously you can using the Microsd with magisk. Can flash again the TWRP file... So install and ROM start with Root. After that TWRP fixed in your phone!
Well, using TWRP if no look Microsd so you need in the option WIPE-FORMAT DATA (this wipe data correctly). If TWRP can look the Microsd so easy install magisk.
Other same situation happened /solved here: https://forum.xda-developers.com/android/development/tank-xtreme-pro-recovery-t3716211/post77201956
Sent from my BLUBOO Xtouch using XDA Labs
Hi, i was wondering if you could help me with TWRP recovery for my device too. I use Tecno Pouvoir 2, it has the same chipset as the above phone but it runs Android Oreo OS. my kernel is 4.4.95+...... Thanks
The firmware is not flashing at all . It's saying boot verification is enabled in sp flash tool
---------- Post added at 06:48 PM ---------- Previous post was at 06:48 PM ----------
I have the vivo one plus
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
I'm going insane. I lost nvram...yay... Flashed wrong preloader . Even tried porting firmware
Custom kernel
illuminarok said:
I bought a BLU Vivo ONE from Best Buy the other day and was able to purge most of the adware through the typical adb shell methodology to disable it for the currently running user without physically removing it from the device. However, it still has some really nasty hangups, like secretly blocking Netflix from accessing the remote server in an attempt to push the Amazon Prime Video app that it shipped with. Do we have any idea what this phone is a knock off of? I'd like to get my hands on an original pristine firmware from a non-advertisement subsidized version of this phone and flash that with SP Flash Tool. I did find the scatter file for the BLU Vivo ONE Plus which is also an MT6739 with a slightly bigger screen, etc. and was able to take a backup using SP Flash Tool. I would like to get TWRP or something on there so that I can flash Magisk as a starting point, but ultimately a non-ad subsidized firmware would be ideal. I haven't had an android phone since the original Droid Incredible, so this is all new to me again. Also, the phone is running Nougat 7.1.1.
Click to expand...
Click to collapse
hi please, I need a custom kernel for the blu vivo one, I have twrp flashed and supersu flashed too?