wipe dalvik cache and data fail - Xiaomi Redmi Note 4 Questions & Answers

Hi... Guys currently i am using twrp recovery 3.3.1.0 but i can't do wipe dalvik and cache in the recovery mode i always shows fail

Arbaz choudhary said:
Hi... Guys currently i am using twrp recovery 3.3.1.0 but i can't do wipe dalvik and cache in the recovery mode i always shows fail
Click to expand...
Click to collapse
Have you tried OrangeFox recovery? It's working for me and many other users:
https://forum.xda-developers.com/re...recovery-orangefox-recovery-project-t3775933?

Sir can you plzz tell me how to install it

Related

[Q] Resurrection Remix V1.0Pro

Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium

HTC flyer not booting-stuck on htc logo

hi,
so i have htc flyer, unlocked bootloader, have CWM recovery, S-ON and trying to install custom rom
have tried installing through CWM and flash boot boot.img, nothing
wiped cache and data and dalvik... pls help
thnx in advance
did you found out how to resolve it?
noob403 said:
did you found out how to resolve it?
Click to expand...
Click to collapse
not yet
techknewz1 said:
hi,
so i have htc flyer, unlocked bootloader, have CWM recovery, S-ON and trying to install custom rom
have tried installing through CWM and flash boot boot.img, nothing
wiped cache and data and dalvik... pls help
thnx in advance
Click to expand...
Click to collapse
Flash the boot.img first. Stay in bootloader then go to recovery, full wipe, i.e factory data reset, cache, dalvik cache, then format system. After this install yr rom when finish installing wipe cache and dalvik cache again, reboot.
ndmuni said:
Flash the boot.img first.
Click to expand...
Click to collapse
You have to flash boot.img using fastboot, to clarify.

Htc one x plus

I've tried to flash many roms but it always gets stuck on boot I have been waitingssince 3hours and it is not starting what should I do? I have performed the following Steps
1)wipe data, cache and delvik cache
2)flashed cm11
3)flashed gapps
4)reeboted system.
I am using cwm recovery plsss help ?
Rishi27100 said:
I've tried to flash many roms but it always gets stuck on boot I have been waitingssince 3hours and it is not starting what should I do? I have performed the following Steps
1)wipe data, cache and delvik cache
2)flashed cm11
3)flashed gapps
4)reeboted system.
I am using cwm recovery plsss help ?
Click to expand...
Click to collapse
FLASH THE FCUING KERNEL!!!!!! DO YOU PEOPLE NOT READ?!?!

Bootloop after installing Lollipop

This happens every time I flash any lollipop ROM, it seems to work with Kitkat ROMs though. What should I do? And yes, I wiped dalvik.
Before installing any rom at first flash stock rom.
Go to cwm or any recovery Wipe data, cache, dalvik cache. flash rom & reboot system.
Sureshtuty said:
Before installing any rom at first flash stock rom.
Go to cwm or any recovery Wipe data, cache, dalvik cache. flash rom & reboot system.
Click to expand...
Click to collapse
I did that and it still doesn't work.
Radu Florin said:
I did that and it still doesn't work.
Click to expand...
Click to collapse
first boot will take 10 min
Sureshtuty said:
first boot will take 10 min
Click to expand...
Click to collapse
Yes, I know. This isn't the first time I flash a ROM, but this is the first time I get a bootloop even after I wipe dalvik cache.
Radu Florin said:
Yes, I know. This isn't the first time I flash a ROM, but this is the first time I get a bootloop even after I wipe dalvik cache.
Click to expand...
Click to collapse
u have to Wipe data, cache, dalvik cache Not only dalvik cache
Sureshtuty said:
u have to Wipe data, cache, dalvik cache Not only dalvik cache
Click to expand...
Click to collapse
I did that the first time you told me.

Onplusx failed intall

My phn rooted
Now prbm I install 2.1.3x Installed failed in stock recovery help any 1 fix prbm tell
samheras said:
My phn rooted
Now prbm I install 2.1.3x Installed failed in stock recovery help any 1 fix prbm tell
Click to expand...
Click to collapse
...
Install twrp-2.8.7.0-onyx_f2fs_r4.img
Boot in TWRP
Wipe Cache / Wipe Dalvik Cache / Wipe data
Flash OnePlusOxygen_14_OTA_005_all_201511232152.zip
Wipe Cache / Wipe Dalvik Cache
Flash OnePlusOxygen_14_OTA_005-006_patch_201511301941.zip
Wipe Cache / Wipe Dalvik Cache
Reboot ...
Flash BETA-SuperSU-v2.52.zip
Reboot ...
There will be OxygenOS 2.1.3 x with root.

Categories

Resources