hi i am hoping for a bit of advice please ,i bought a g9650 china variant for the first few weeks the front facing camera was fine then i got the camera failed message,if i cleared the cache and do the normal things the app reloads,but the front camera never works,ive tried in safe mode ,no joy even in the diag page and the front camera wont work.ive bought replacement front cameras for this model from uk and even from china as i was told china use slightly different hardware but still this front camera will not work.any suggestions would be helpful thanks
Related
hello,
Please I need your help,
I just bought a galaxy S2 and I find it good, just that I notice the quality of my camera is not good, as it is a bit of noise. even when 8Mpx for camera, I think it's not fair.
Can someone help me please,
thank you
Try some of the other cameras available at the market and check whether the error or problem persists.
thx mat-sie for answer
I'm new in android, can you pls give some names camera at the market ?!
Android Market Search >> Camera
jje
Well you could try 'CameraZoom FX'. Its one of the best for photos and its on sale right now on the market. I use it as my regular camera app.
Oh yeah... you should probably check your camera firmware to be on the safe side. Go on the stock dailer and type *#34971539#. Touch 'Phone/CAM FW Ver Check' and take a note of the firmware then touch 'ISP ver check'. If you have Fujitsu M5MOLS as your camera sensor then that's a problem. Its known to be defective.
Also keep in mind that while the GS2 camera is awesome and takes amazing photos (especially outdoor ones), its still a phone camera and is inferior to an actual 8mp camera when it comes to image quality.
I just did the tests that you told me,
here I have had as result
Cam FW Ver : OMEF01
Phone FW Ver : TBEC28
ISP Ver : M5MOLS Fujitsu
why this is a problem if I M5MOLS as Fujitsu device?! and is that there's another model like device?
thank you
m-graphique said:
I just did the tests that you told me,
here I have had as result
Cam FW Ver : OMEF01
Phone FW Ver : TBEC28
ISP Ver : M5MOLS Fujitsu
why this is a problem if I M5MOLS as Fujitsu device?! and is that there's another model like device?
thank you
Click to expand...
Click to collapse
Don't panic mate LOL. Since I have the problem I just wanted you to check and make sure everything was OK with your camera. Seeing as your firmware is OMEF01 you most likely will be ok so don't worry. Test recording a video in low light, if it doesn't stutter or have significant FPS drops, then your camera is fine.
If it does, then go onto the Galaxy S2 general forum and search for a thread called "Samsung Galaxy SII - Camera issues". It explains everything you need to know there but basically the Fujitsu M5MOLS sensor equipped with the SCEF02 firmware is faulty and the video recording on the camera suffers from low FPS in low light and bad auto focus. Sorry if I made you panic there, its just that some people may not even be aware they have the problem.
Hi guys, excuse me but I need your help
My s6 edge was initially in lollipop 5.1.1 and after trying to update to nougat with smart switch , I've got a drk problem. I sent it to be repaired and it's a success my phone is like a new one with rooted nougat. However the quality of my back camera decreased considerably since the repair. And I don't know why. I tried wipe cache of the camera but it's the same. The image is like an 5mp camera's photo while my camera's settings is in 16mp
Please I really need your help my phone is only 6 days old.
I precise that my phone hasn't been unmounted.
Hello guys, I hope someone can help me
I recently got a Xiaomi Redmi Note 4 Global (MIDO) phone and today I noticed after taking a selfie that the image is mirrored.
I went into the camera app (stock) and tried to find a setting to disable mirrored images but have so far had no luck.
Does anyone know how can I make the front facing camera take normal pictures? As simple as MIUI might try to be, I cant believe
there might not be such an option.
It is black 3/32 version, everything 100% stock
I have 2 redmi note 4 one I buy in March but unfortunately its 100% damage...so I buy second redmi note 4 who comes with Samsung camera sensor...so I am not satisfied with Samsung camera sensor pictures specially when I zoom any object pictures is not good...so I open my new rn 4 and remove the camera and inserted Sony imx258 camera but when I open camera app its says error... So I inserted Samsung camera again...so I wanna know any method is possible if I root my phone and change my Samsung camera sensor to Sony.the Sony camera sensor form old rn 4 who comes with Sony.
I don't know but if I was you, I'd install the better camera sensor, then flash the latest MIUI developer ROM with MiFlash. This way probably some config or firmware file will be updated and the camera will work (maybe a simple reset could do the trick).
Bro not work i flash with fastboot... But not opening the camera of sony.
AbhishekJi111 said:
Bro not work i flash with fastboot... But not opening the camera of sony.
Click to expand...
Click to collapse
There is a different camera models with different connectors model 3 / 32Gb is not the same as the model with 4 / 64GB.
The connector is in fact the same visual but your contacts do not match.
check this video:
https://www.youtube.com/watch?v=Vpc3dd-WVcU&t=14s
Hello, I have purchased Redmi Note 4 (sd 625) India via Flipkart. The same phone is also purchased by my friend via Flipkart.
But I notice variation between my and his camera and when I dig out the problem I come to the result that both phone has different camera modules.
I've a Sony imx258 back camera but he has a Samsung S5k3l8 back camera. So, I contacted some more Redmi Note 4 users and some of them have Samsung Sensor while some have sony.
So my question is while flashing any custom ROM will my camera work or not? As I think the camera blobs for both devices are different.
Note:- To view your camera sensor just go to Settings>About Phone>tap kernel version 5 times>version information.
Ｄｈｒｕｖ said:
Hello, I have purchased Redmi Note 4 (sd 625) India via Flipkart. The same phone is also purchased by my friend via Flipkart.
But I notice variation between my and his camera and when I dig out the problem I come to the result that both phone has different camera modules.
I've a Sony imx258 back camera but he has a Samsung S5k3l8 back camera. So, I contacted some more Redmi Note 4 users and some of them have Samsung Sensor while some have sony.
So my question is while flashing any custom ROM will my camera work or not? As I think the camera blobs for both devices are different.
Note:- To view your camera sensor just go to Settings>About Phone>tap kernel version 5 times>version information.
Click to expand...
Click to collapse
Camera works fine for both sensors . However, the slow motion and other feature enabling tricks work only on Sony sensor.
You got lucky. Xiaomi changed the camera sensor from first Sony to Samsung and then to Omnivision. Sony is the best, Samsung is fine and Omnivision is the worst out of this three sensors.
You shouldn't get any difference if installing a custom ROM
Stuart0610 said:
You got lucky. Xiaomi changed the camera sensor from first Sony to Samsung and then to Omnivision. Sony is the best, Samsung is fine and Omnivision is the worst out of this three sensors.
You shouldn't get any difference if installing a custom ROM
Click to expand...
Click to collapse
You're right maybe I'm extra lucky cause I ordered it in the month of July and still I get Sony IMX
My friend broke his RN4 display and he's selling the phone and when I asked him, He is willing to exchange the camera sensor(He has the sony sensor whereas I've the samsung) Can I just pop out his camera sensor and plug it in into my device or things are different on the software level too?
Aman Singh said:
My friend broke his RN4 display and he's selling the phone and when I asked him, He is willing to exchange the camera sensor(He has the sony sensor whereas I've the samsung) Can I just pop out his camera sensor and plug it in into my device or things are different on the software level too?
Click to expand...
Click to collapse
Technically it should work because the drivers for the 3 different modules are already installed within the ROM.
What is the product number of you and your friend's device? It should be on the box (2016101 or 2016102). And would you be able to take a picture of your friend's Sony module? A lot of people on a different thread are trying to replace their Samusng/Omnivision modules with about 50% success because we don't know the exact numbers of module code of the IMX258
Thanks in advance!
yohyah said:
Technically it should work because the drivers for the 3 different modules are already installed within the ROM.
What is the product number of you and your friend's device? It should be on the box (2016101 or 2016102). And would you be able to take a picture of your friend's Sony module? A lot of people on a different thread are trying to replace their Samusng/Omnivision modules with about 50% success because we don't know the exact numbers of module code of the IMX258
Thanks in advance!
Click to expand...
Click to collapse
Mine is 2016100 IDK his, I'll need to check. Well I'm on a Custom ROM so hope that can support it, I'll try, if it works or will revert back if that can be done
Thanks