Has anyone refreshed successfully on Xperia1?
lianling said:
Has anyone refreshed successfully on Xperia1?
Click to expand...
Click to collapse
Refreshed? Certain GSIs work but make sure you have a patched boot.img
Mackay53 said:
Refreshed? Certain GSIs work but make sure you have a patched boot.img
Click to expand...
Click to collapse
Thank you, how should the boot be repaired?
lianling said:
Thank you, how should the boot be repaired?
Click to expand...
Click to collapse
Use magisk to patch the stock boot.img then flash it in fastboot then the GSI
OP, did you ever flash a ROM onto your 1?
Related
Content removed
Good work. Any chance you'll support other versions?
paulo boë said:
Good work. Any chance you'll support other versions?
Click to expand...
Click to collapse
yea as soon as i have all other variant files i will
my j5 is j5oof thats why i have all the files si its the first one
ankitv6 said:
yea as soon as i have all other variant files i will
my j5 is j5oof thats why i have all the files si its the first one
Click to expand...
Click to collapse
Awesome:good::laugh:
This can be run on j500h lollipop version ?
Keancarl said:
This can be run on j500h lollipop version ?
Click to expand...
Click to collapse
no man just MM
ankitv6 said:
no man just MM
Click to expand...
Click to collapse
Thanks bro no solution about this or i need to system update before i seen this message but system says its modified maybe I could flash again my stock rom and proceed to software update
Keancarl said:
Thanks bro no solution about this or i need to system update before i seen this message but system says its modified maybe I could flash again my stock rom and proceed to software update
Click to expand...
Click to collapse
you must have installed a custom recovery or have rooted your official rom that is why it doesn't download updates
you have to flash your stock rom through odin first then you can receive updates
if you are doing this just for installing stock MM then download latest firmware or MM firmware for your variant and flash it
enjoy MM
Greetings man Is this a built from source? If it is I can't see any link to the sources...
How to install .img file through recovery
.img file
sivakrishnanj said:
.img file
Click to expand...
Click to collapse
download this img go to twrp and in bottom right hand corner select install image and install image then flash wifi fix as a zip
do let me know how it works out
In cpu governs - no, impluse
In io - no, zen
Suggestions: please make as zip file, after flashing my recovery has gone in this img file
sivakrishnanj said:
In cpu governs - no, impluse
In io - no, zen
Suggestions: please make as zip file, after flashing my recovery has gone in this img file
Click to expand...
Click to collapse
There are two options: flash img in recovery partition and boot partition, I suppose you chose recovery instead of boot..
updesh94 said:
There are two options: flash img in recovery partition and boot partition, I suppose you chose recovery instead of boot..
Click to expand...
Click to collapse
Its my fault i should have mention it in instructions
Sry its my first post so had no idea
Btw i will be removing this thread as soon as i have access to my laptop
sivakrishnanj said:
In cpu governs - no, impluse
In io - no, zen
Suggestions: please make as zip file, after flashing my recovery has gone in this img file
Click to expand...
Click to collapse
Yea you are right i probably should have
Bulgaricus said:
Greetings man Is this a built from source? If it is I can't see any link to the sources...
Click to expand...
Click to collapse
its stock kernel without any changes :laugh:
SpamMachine said:
its stock kernel without any changes :laugh:
Click to expand...
Click to collapse
Yeah cuz having adreno idler is pure stock feature lmao
SpamMachine said:
its stock kernel without any changes :laugh:
Click to expand...
Click to collapse
I never said its not a stock kernel man i just said that you cannot use your wifi with it which i tried and fixed on mine and wanted to share thats it
ankitv6 said:
I never said its not a stock kernel man i just said that you cannot use your wifi with it which i tried and fixed on mine and wanted to share thats it
Click to expand...
Click to collapse
I have no idea what are you talking about:laugh:
I asked this question because of the downloads are more than 200 but I was not able to boot that Android P dp1.
I'm curious about this too. I tried flashing it via the latest Redwolf recovery but it came up with an Invalid zip error.
Me toó i can flash but i think this .zip is for proyect treable
dustmalik said:
I'm curious about this too. I tried flashing it via the latest Redwolf recovery but it came up with an Invalid zip error.
Click to expand...
Click to collapse
drmuruga said:
I asked this question because of the downloads are more than 200 but I was not able to boot that Android P dp1.
Click to expand...
Click to collapse
urus277 said:
Me toó i can flash but i think this .zip is for proyect treable
Click to expand...
Click to collapse
That's because it's a zip. Remember how in the beginning we needed to update twrp to flash oreo roms or it would give error 7. It's same here. And also treble roms are system.img file which we have to flash, and not any .zip file. Unless and until someone updates our twrp to support android p dev preview. It would be a hard time installating here.
Has anyone tried the new uploaded builds?
dustmalik said:
Has anyone tried the new uploaded builds?
Click to expand...
Click to collapse
Can you link them?
MyNameIsRage said:
Can you link them?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=673956719939829481
https://androidfilehost.com/?fid=673956719939829477
Read this:
https://forum.xda-developers.com//redmi-note-4/help/android-9-0-rom-t3766361/post75963703
Helo guys come again with me,
before say thanks to @Arteush share his ota-update of beta Q Note9.
I just wanna share the System Dump of the Galaxy Note9 (N960F) with Android 10 Beta1 free for dev to use this with credit of course.
this is include system, vendor, odm, and boot.
Have fun with Android Q.
link download
https://drive.google.com/file/d/1W8MFTk7Pdm0WnwquChwMf7mDAfS0VWX7/view
If we have twrp can we just flash this as a zip? Or will it not work
Drizzy xS said:
If we have twrp can we just flash this as a zip? Or will it not work
Click to expand...
Click to collapse
no its dump only.. but wait i work on flashable. just a moment
ridwan.sn said:
no its dump only.. but wait i work on flashable. just a moment
Click to expand...
Click to collapse
Okay waiting
ridwan.sn said:
no its dump only.. but wait i work on flashable. just a moment
Click to expand...
Click to collapse
Thank you!!!!!
Any possibility you could share an ODIN flashable firmware or an OTA file for those who dont have their phone rooted?
UltraEra said:
Any possibility you could share an ODIN flashable firmware or an OTA file for those who dont have their phone rooted?
Click to expand...
Click to collapse
I'd also like to use rooted Q. Seems that it is impossible at this stage. It bootloops after installing TWRP and Magisk 20.1
charackthe said:
I'd also like to use rooted Q. Seems that it is impossible at this stage. It bootloops after installing TWRP and Magisk 20.1
Click to expand...
Click to collapse
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
charackthe said:
I'd also like to use rooted Q. Seems that it is impossible at this stage. It bootloops after installing TWRP and Magisk 20.1
Click to expand...
Click to collapse
yeah need patch for magisk.
because now has new system_root
Arteush said:
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
Click to expand...
Click to collapse
thanks for info and ure ota. i fix them too with disable encrypt
now flashable is ready
ridwan.sn said:
thanks for info and ure ota. i fix them too with disable encrypt
now flashable is ready
Click to expand...
Click to collapse
Can't wait for you to share a flashable version
ridwan.sn said:
no its dump only.. but wait i work on flashable. just a moment
Click to expand...
Click to collapse
Do you have a flashable file ? thakyou
Arteush said:
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
Click to expand...
Click to collapse
Trying that out right now, will let you all know if I run into a bootloop. (It gave an ODM mounting error, don't know its significance but that's why I'm worried.)
Actually while I was writing this the phone turned on.
EDIT: After a reboot, the phone doesn't boot at all it sends me to the download mode.
ridwan.sn said:
yeah need patch for magisk.
because now has new system_root
Click to expand...
Click to collapse
ridwan.sn said:
thanks for info and ure ota. i fix them too with disable encrypt
now flashable is ready
Click to expand...
Click to collapse
:good:
Yep new system as root stuff! Which need some build changes to get a fully compatible twrp.
I will upload new one
Arteush said:
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
Click to expand...
Click to collapse
For everyone's information, this works and you can use root nicely, however, most magisk modules will destroy the system and throw you out to the download mode and you will have to wipe the data to boot again. I presume this is because most of the modules I have tried aren't Android 10 compatible yet. If anybody is able to get V4A work or install current magisk modules and run them reach out to me because I'd like to hear how.
EDIT: I somehow got it working but now I see that the Bluetooth devices aren't kept after reboot not even with the proper module to keep them.
How do you install this / System dump android 10 n960fxxu4zsk5 // I'm on the recovery twrp
patensas said:
Can't wait for you to share a flashable version
Click to expand...
Click to collapse
not now. i need fix something in system.. its give me error.
costinghe said:
Do you have a flashable file ? thakyou
Click to expand...
Click to collapse
sorry not now brother..
Arteush said:
:good:
Yep new system as root stuff! Which need some build changes to get a fully compatible twrp.
I will upload new one
Click to expand...
Click to collapse
right now.. its need new twrp also patch too from magisk to get wor.
good luck mate we wait ure twrp.
alhgan2014 said:
How do you install this / System dump android 10 n960fxxu4zsk5 // I'm on the recovery twrp
Click to expand...
Click to collapse
this just for dump.. maybe u can extract to ure phone and flash single .image by twrp. not recomended but u can try :good:.
ridwan.sn said:
not now. i need fix something in system.. its give me error.
sorry not now brother..
right now.. its need new twrp also patch too from magisk to get wor.
good luck mate we wait ure twrp.
this just for dump.. maybe u can extract to ure phone and flash single .image by twrp. not recomended but u can try :good:.
Click to expand...
Click to collapse
Trwp with q support is here
charackthe said:
For everyone's information, this works and you can use root nicely, however, most magisk modules will destroy the system and throw you out to the download mode and you will have to wipe the data to boot again. I presume this is because most of the modules I have tried aren't Android 10 compatible yet. If anybody is able to get V4A work or install current magisk modules and run them reach out to me because I'd like to hear how.
EDIT: I somehow got it working but now I see that the Bluetooth devices aren't kept after reboot not even with the proper module to keep them.
Click to expand...
Click to collapse
Can you elaborate how you manage to get V4A to work? I'm desperate, lol.
Arteush said:
Trwp with q support is here
Click to expand...
Click to collapse
great work mate :good::highfive:
so my flashable is can flashed without issue now.
lets me to check now
AxelCocaine said:
Can you elaborate how you manage to get V4A to work? I'm desperate, lol.
Click to expand...
Click to collapse
it.
ah u need ask viper dev to add it sammy Q driver for support
For Galaxy S23 Ultra S918B
No way!!!! Very impressive!
legolgel said:
No way!!!! Very impressive!
Click to expand...
Click to collapse
it working I tested
Wow!
legolgel said:
Wow!
Click to expand...
Click to collapse
Art's23u said:
it working I tested
Click to expand...
Click to collapse
Can you PM me link for Lineage OS?
What is this exactly?
mojito0 said:
What is this exactly?
Click to expand...
Click to collapse
vbmeta.img patched for bootable in custom binary
such as
custom recovery - custom rom - gsi
can anyone make a guide on how to install the gsi rom on the galaxy?
ULTRA90 said:
can anyone make a guide on how to install the gsi rom on the galaxy?
Click to expand...
Click to collapse
Use the DSU sideloader.
what happens if you flash t225 firmware to t220
It depends on the device, if device has minimal changes (display) then it would would work
50/50 change.
Davidwhhhhhhhhhy said:
what happens if you flash t225 firmware to t220
Click to expand...
Click to collapse
As the saying goes..."F around and find out". I do not suggest it.
Davidwhhhhhhhhhy said:
what happens if you flash t225 firmware to t220
Click to expand...
Click to collapse
xxxc
delete
tom.android said:
Let's test BananaDroid GSI.
View attachment 5915111
Click to expand...
Click to collapse
Did you remember what this thread about, it about flashing T225 firmware to T220.
cmfCyangenModteam said:
Did you remember what this thread about, it about flashing T225 firmware to T220.
Click to expand...
Click to collapse
ok its your thread sorry.
tom.android said:
ok its your thread sorry.
Click to expand...
Click to collapse
Its fine, just remember no warez!
Flash stock recovery first
Difficul said:
Flash stock recovery
Click to expand...
Click to collapse
Difficul said:
Flash stock recovery first
Click to expand...
Click to collapse
okay I did
Davidwhhhhhhhhhy said:
okay I did
Click to expand...
Click to collapse
it says secure check Fail pit
Davidwhhhhhhhhhy said:
it says secure check Fail pit
Click to expand...
Click to collapse
Ok , I think is can hardbrick .Try other firmware gsi for safer
[CLOSED] One ui gsi to all samsung
updated 8 times One ui gsi to all samsung no boot loops all features are working now i'm using one ui 5 it's pretty fast For those who want, the best 3 game acceleration magisk modules are below, I've been using them for a long time, it's fine...
forum.xda-developers.com