kernel - stock ready for root
Boot.img For Xperia 5 J8210 and J9210 variants.
J8210/J9210
DOWNLOAD:
STOCK
J8270
DOWNLOAD:
STOCK
For root you need install magisk manager and patch boot.img via magisk .
Next step is easy : Install drivers and use flashtool or fastboot to flash patched boot.img .
Good luck .
FLASHING:
For flash you need :
1.Unlocked bootloader (warranty to be not void)
2.ADB i FASTBOOT
3.Drivers for your device (try to install drivers from flashtool. Win10 users must disable drivers signing.)
If you like my work , please press Thanks
If you want to buy me a coffee for my work you can use PayPal Thanks
https://paypal.me/marek10747
My Facebook group :
Facebook support group , for all devices !!
This kernel I do for xperia 5 only
This kernel is from flashtool , I only unpack it manually without use flashtool , because flashtool don't support unpacking this files now .
XDA:DevDB Information
XPERIA 5 - KERNEL, Kernel for the Sony Xperia 5
Contributors
MAREK10747
Kernel Special Features:
Version Information
Status: Stable
For: J8210,J9210
Base: 55.0.A.11.25
Created 2019-11-12
Last Updated 2019-11-12
Thanks.
However, I won't root my device. I've had Sony devices since 2012 and it'll be the 1st device that I won't root.
Unfortunately, since XZ2, we have no DRM patch and cannot have hope to have it...
I don't want to lose DRM protected stuff (such as camera denoising...).
Thank you, might give this a go. Have you tested on an Xperia 5?
Sent from my Sony J8210 using XDA Labs
Until the Xperia 5 doesnt received anymore os updates I will give this a go. Does it contain the drm keys?
That was stock boot without patches , drm etc. You can flash it via fastboot .
nreuge said:
Thanks.
However, I won't root my device. I've had Sony devices since 2012 and it'll be the 1st device that I won't root.
Unfortunately, since XZ2, we have no DRM patch and cannot have hope to have it...
I don't want to lose DRM protected stuff (such as camera denoising...).
Click to expand...
Click to collapse
Looks like You totally missed the DRM Patches which are around since 2017... There is nothing not working anymore. Even AOSP can take Denoised Pictures OOTB. Besides that has SONY Changed a lot around the Camera with the Xperia 1 & 5. I mean... 3 Lenses? We are good to go. My Xperia 5 will be in My Hands tomorrow and i will not wait a Single Minute to unlock its Bootloader :angel:
Miustone said:
Looks like You totally missed the DRM Patches which are around since 2017... There is nothing not working anymore. Even AOSP can take Denoised Pictures OOTB. Besides that has SONY Changed a lot around the Camera with the Xperia 1 & 5. I mean... 3 Lenses? We are good to go. My Xperia 5 will be in My Hands tomorrow and i will not wait a Single Minute to unlock its Bootloader :angel:
Click to expand...
Click to collapse
a bit off-topic
@Miustone could you run "Camera2 API Probe" before/after unlocking and post screenshots of the results for comparision, please. I would like to know which DRM camera stuff still works afterwards without ta-backup/restore
blue-spiderfire said:
a bit off-topic
@Miustone could you run "Camera2 API Probe" before/after unlocking and post screenshots of the results for comparision, please. I would like to know which DRM camera stuff still works afterwards without ta-backup/restore
Click to expand...
Click to collapse
Sure. Will do that over the Weekend...
Miustone said:
Looks like You totally missed the DRM Patches which are around since 2017... There is nothing not working anymore. Even AOSP can take Denoised Pictures OOTB. Besides that has SONY Changed a lot around the Camera with the Xperia 1 & 5. I mean... 3 Lenses? We are good to go. My Xperia 5 will be in My Hands tomorrow and i will not wait a Single Minute to unlock its Bootloader :angel:
Click to expand...
Click to collapse
Ha ha!! Excuse me but find us a DRM patch for xperia XZ2, XZ3 and 1. You won't find because it does not exist.
Beside my Xperia 5, I've my good old rooted XZ2: its denoising in low light conditions is not good at all, it was much better when it was not rooted. Why? Because some Sony camera stuff is DRM protected.
Now, you can do anything with your device, I don't care...
PS: the only existing "patch" for XZ2 only prevents black view in camera on Pie (it was a real patch on Oreo... but this is a long story, I won't tell it here).
What sin file did you extract from and what tool did you use to extract it? Thanks
EDIT: @MAREK10747 sorry, read in your post that you extracted manually because Flashtool doesn't work with these files yet. I've uploaded what I believe is the US' Xperia 5 (J8270) boot image. If you have a moment would you mind extracting this one so we can root?
https://drive.google.com/drive/folders/1DLNDojeqr-Pmq0Xu6F5Nr_0I16b1uTd2?usp=sharing
orrorin said:
What sin file did you extract from and what tool did you use to extract it? Thanks
EDIT: @MAREK10747 sorry, read in your post that you extracted manually because Flashtool doesn't work with these files yet. I've uploaded what I believe is the US' Xperia 5 (J8270) boot image. If you have a moment would you mind extracting this one so we can root?
https://drive.google.com/drive/folders/1DLNDojeqr-Pmq0Xu6F5Nr_0I16b1uTd2?usp=sharing
Click to expand...
Click to collapse
I can try to help you . Soon I download this file and extract , to next sunday i'm busy .
@orrorin https://mega.nz/#!YQcgBaZa!Vm4Nu-CMHtCD27V-SK14-6mjAiJwEwgFvW5xIprJWHI
Get your boot
MAREK10747 said:
@orrorin https://mega.nz/#!YQcgBaZa!Vm4Nu-CMHtCD27V-SK14-6mjAiJwEwgFvW5xIprJWHI
Get your boot
Click to expand...
Click to collapse
THANK YOU!!!
EDIT: This totally worked, rooted with Magisk with no TWRP and (so far) working fine
orrorin said:
THANK YOU!!!
EDIT: This totally worked, rooted with Magisk with no TWRP and (so far) working fine
Click to expand...
Click to collapse
No problem If you you can press thanks in my thread and/or give me one U.S dolar donate
MAREK10747 said:
@orrorin https://mega.nz/#!YQcgBaZa!Vm4Nu-CMHtCD27V-SK14-6mjAiJwEwgFvW5xIprJWHI
Get your boot
Click to expand...
Click to collapse
@orrorin
TWRP`? :crying:
Edit: Oh, so You just flashed a Magisk edited Kernel Image for Root?
@MAREK10747 any chance that You can do the Job? https://forum.xda-developers.com/xperia-5/how-to/twrp-xperia-5-t4015077
---------- Post added at 20:06 ---------- Previous post was at 20:05 ----------
[/COLOR @MAREK10747 any chance that You can do the Job? https://forum.xda-developers.com/xperia-5/how-to/twrp-xperia-5-t4015077
I don't have this device . Chance is little . After broke of XA1 I bought meizu m6t and I have meizu device . If you motivate me via paypal I can try to make twrp without this device physically .
Miustone said:
@MAREK10747 any chance that You can do the Job? https://forum.xda-developers.com/xperia-5/how-to/twrp-xperia-5-t4015077
---------- Post added at 20:06 ---------- Previous post was at 20:05 ----------
[/COLOR @MAREK10747 any chance that You can do the Job? https://forum.xda-developers.com/xperia-5/how-to/twrp-xperia-5-t4015077
Click to expand...
Click to collapse
Actually you can try to flash twrp from lenovo , but I don't test it . http://www.mediafire.com/file/89uw6vpivyd1q91/recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img/file Possibly this twrp boot correct and to be work if no say me about this .
If this recovery boot , you can make backup of system boot and other partitions and give me here . I try to do mod for system and boot .
Hi!
Sorry if this is a stupid question, I'm a complete beginner at these things and never rooted anything in my life so... Please be gentle I'm looking to root my Xperia 5 j9210 version because I'm told that's what I need to do in order to regain the ability to record calls which was lost to me due to the Android Pie update. However, I feel lost in the terminology and I'm really unsure about what I actually need and what I don't need... I read somewhere I need a custom rom, someone said Stock works fine, either way I can find neither stock nor custom roms for the device in question despite my best efforts... I did however find this, but a Kernel is not a rom as far as I understand so I don't really know where that leaves me... Would anyone mind explaining to me what this is, if it will help me achieve what I need (root acess so I can record calls) and if so how do I use it? I'm talking like, explain this as if I was a caveman and then maybe I might get it somewhere down the line... xD
I'm imagining a lot of people would just go "You have no idea what you're doing, this is not for you, please stop", but I am genuinely trying to learn about these things so... If you don't mind, please help this humble beginner understand the basics
Any and all help is much appreciated!
Cheers
Miustone said:
@orrorin
TWRP`? :crying:
Edit: Oh, so You just flashed a Magisk edited Kernel Image for Root?
Click to expand...
Click to collapse
I totally agree!
@MAREK10747
Sorry in advance for my ignorance:
But at least, a minimum of knowledge of Android and Magisk assumed, the people will know what to do. Before at least there's a working TWRP for this device, I won't buy it and will stay with a supported XZ2/XZ3 device.
Well, it's a new device, and I surely don't want to criticize you; it will help people who already got this device and can't wait to root :good:
MAREK10747 said:
... If you motivate me via paypal I can try to make twrp without this device physically...
Click to expand...
Click to collapse
Sorry again, but this isn't the correct order. It has to be: Someone offers a product and another one is willing to pay for it and/or support it, but not: "Send me some money via PayPal to motivate me and I will see what I can do". It's like to buy a pig in a poke!
On the other hand, I don't know, if this goes conform with the xda rules...
Related
I bought this TS clone from Amazon.co.uk. It came with android 4.4 and I have tried everything to root it. Can someone nice please help me? I also want to put one of the recent custom roms on it. Thank you. My major gripe with it is that I want it to tether to my phone for notifications.
abbas said:
I bought this TS clone from Amazon.co.uk. It came with android 4.4 and I have tried everything to root it. Can someone nice please help me? I also want to put one of the recent custom roms on it. Thank you. My major gripe with it is that I want it to tether to my phone for notifications.
Click to expand...
Click to collapse
Is able to provide an image of the entire firmware currently running on his device ?
No, I have been unable to back up the image because I could not root it.
abbas said:
No, I have been unable to back up the image because I could not root it.
Click to expand...
Click to collapse
Ok, there are three ways to get a backup
try to take a look here for the first two : http://forum.xda-developers.com/showthread.php?t=2730031
the third: install the TWRP recovery by Sp Flash Tool then backup From recovery .
After installing the recovery you can root installing Chainfire superSU.zip http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
:good:
rik81 said:
Ok, there are three ways to get a backup
try to take a look here for the first two : http://forum.xda-developers.com/showthread.php?t=2730031
the third: install the TWRP recovery by Sp Flash Tool then backup From recovery .
After installing the recovery you can root installing Chainfire superSU.zip http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
:good:
Click to expand...
Click to collapse
it would be really good to get the proper specs for the watch - the advert list some things that seem to contradict each other.
Can you let us have the info from the watch itself?
I would also be nervous about putting a custom ROM on it - you would lose the sensors; you already have KK on it, so why bother?
However, if you can get a dump as rik81 says, it might help port it onto the TS and allow our sensors to work
CPGOD said:
it would be really good to get the proper specs for the watch - the advert list some things that seem to contradict each other.
Can you let us have the info from the watch itself?
I would also be nervous about putting a custom ROM on it - you would lose the sensors; you already have KK on it, so why bother?
However, if you can get a dump as rik81 says, it might help port it onto the TS and allow our sensors to work
Click to expand...
Click to collapse
Ok, Ive also got one of these now.
The only way I could root it was with KingoRoot, be aware - it takes ages, but eventually works.
This unit is more like the TS than the Ironman, so there may be a good chance of backporting to the TS, with working sensors afterall.
I'll see if I can get a full backup for +kuronosan and others to have a look at.
CPGOD said:
Ok, Ive also got one of these now.
The only way I could root it was with KingoRoot, be aware - it takes ages, but eventually works.
This unit is more like the TS than the Ironman, so there may be a good chance of backporting to the TS, with working sensors afterall.
I'll see if I can get a full backup for +kuronosan and others to have a look at.
Click to expand...
Click to collapse
Great, if you can provide a backup I could try to take a look.
However if it is really the same unit there should be no problem
Any news on the Backup? Looking forward to it! I hope, this will bring us a fully functional 4.4 rom for our truesmart!
Gesendet von meinem GT-I9295 mit Tapatalk
moviecut said:
Any news on the Backup? Looking forward to it! I hope, this will bring us a fully functional 4.4 rom for our truesmart!
Gesendet von meinem GT-I9295 mit Tapatalk
Click to expand...
Click to collapse
Will upload Tuesday am GMT
http://www.amazon.co.uk/gp/product/B00UN4UVRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
This is somewhere between a TS and Ironman......the PCB and user interface look more like the original TS, as does the physical form factor, but its nearly as heavy as the Ironman, as its made of steel.
Note that the Recovery partition doesnt seem to work
I will have a look at this today.
---------- Post added at 08:32 AM ---------- Previous post was at 08:20 AM ----------
I'll have a look at this today.
CPGOD said:
http://www.amazon.co.uk/gp/product/B00UN4UVRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
This is somewhere between a TS and Ironman......the PCB and user interface look more like the original TS, as does the physical form factor, but its nearly as heavy as the Ironman, as its made of steel.
Firmware Backup taken MTK Tools: https://drive.google.com/folderview...VJUGVOYnpmdThzMGlva0taODJ1TTU1U1E&usp=sharing
Note that the Recovery partition doesnt seem to work
Click to expand...
Click to collapse
All that remains is to cross your fingers hoping that this kernel is compatible with our units .
Tonight I 'll give a look also possibly only in creating zip file for my ROM with the new kernel and libraries.
imacwear m7
My baseband version is
MOLY.WR8.W1315.MD.WG.MP.V4,
2013/08/14 18:16
Kernel version is
3.4.67
Build number is
X01 X01 ALPS.KK1.MP7.V1.5
1421758728
Trying to get to a computer this week to back up
X1 Develop porting to Callisto 100 (sensors do not work)
Made its successful porting the entire X1 Develop firmware on my Callisto 100 but the sensors do not work
---------- Post added at 06:36 PM ---------- Previous post was at 06:32 PM ----------
bzzybfrm313 said:
My baseband version is
MOLY.WR8.W1315.MD.WG.MP.V4,
2013/08/14 18:16
Kernel version is
3.4.67
Build number is
X01 X01 ALPS.KK1.MP7.V1.5
1421758728
Trying to get to a computer this week to back up
Click to expand...
Click to collapse
I might try this if you wanted to share a backup
okay, so back at square one. same for me.
Link
Can you post a link to buy that watch.
CPGOD said:
http://www.amazon.co.uk/gp/product/B00UN4UVRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
This is somewhere between a TS and Ironman......the PCB and user interface look more like the original TS, as does the physical form factor, but its nearly as heavy as the Ironman, as its made of steel.
Firmware Backup taken MTK Tools: https://drive.google.com/folderview...VJUGVOYnpmdThzMGlva0taODJ1TTU1U1E&usp=sharing
Note that the Recovery partition doesnt seem to work
Click to expand...
Click to collapse
Unable to download the dumped rom. Please give access. Thanks.
I bricked my X1 develop and I will be glad to have access to the backup rom. I need help urgently. Thank you.
Can someone please post the dumped backup for Develop X1. I have asked for this for about a week now with no response.
Tried the Google drive link for the image, but it says it's restrcited. Requested access a few times, but no go. Any one else got an image?
Dear bros/siss, I am an old member of this forum but never happen to me to write any thread. I do read about threads but i am not that genius like our devs, but since i have strong desire about my phone's appearance, i would like to tell you two thins:-\
1) I want oxygen os of one plus two phone which should work without any problem and steps for noobs are very very clearer. Also,it should work on any platform version like 4.3, 4.4 etc.
2) An official/unofficial CM 12 with zero (0) bugs.
We, all users of Grand2 have invested approx rs18,000 to rs21,000 to buy. But nowadays, every mobile phone, costs around 10000-15000 has got CM and many more, but still we are fighting for CM for these continuously 1.5 years. Please i request you guys to raise a positive voice to our DEVs to make these OS as we are awaiting for too much. Kindly share this thread.
Your loving friend/bro.
Thanks.
Hi sorry this is not the right place to ask for roms or things there is a separate section for questions and answers I came here for fora one plus 2 rom you may mislead many people like this so kindly ask things in the questions and answers sections thank you @VECTUS kindly remove this thread or move It as It may mislead at people thank you
here
1> On the TWRP recovery installed on your device, Download the OxygenOS ROM zip file and save it on your desktop.
2> Now extract the folder on your desktop and you will see two different files in the folder. Oxygen_1.0.0_Flashabdle.mdf and Oxygen_1.0.0_Flashabdle.zip. You need a zip file.
3> Step 2. After this connect you phone to the PC and Move the Oxygen_1.0.0_Flashabdle.zip file on your phone.
4> After this turn off your phone and boot in recovery mode. TO do this Hold Volume down button + Power button.
5> Now you phone will boot in recovery mode.
6> Now after this select Wipe option and and delete Cache, Dalvik cache and data.
7> Now go back and Select Install option and ‘choose zip from sd card’ from the Options.
8> Select the OXygenOS zip file and confirm the installation on next screen.
9> After the flash succeeds, you can reboot the device.
10> Enjoy.
So does the rom work? And were is the link to download the flashable zip?
its for oneplus one phone only and i want to know about our phones. so i wrote here coz may be any DEV can help us... link i missed but can be searched o google.
You are 100% right
Maybe its not the right place to ask but the important thing is that devs should read this
I`ll tell you something my friend ... we have few devs and almost of them not so talented ... they could import easy roms (like gennext ) but they cant build roms without bugs so dont expect too much ...
The truth sometimes hurt ... but we still love our devs and support them
sent from my g7102 CM12.1 5.1.1 r8 using tapatalk
I found the link
shahfaishal said:
here
1> On the TWRP recovery installed on your device, Download the OxygenOS ROM zip file and save it on your desktop.
2> Now extract the folder on your desktop and you will see two different files in the folder. Oxygen_1.0.0_Flashabdle.mdf and Oxygen_1.0.0_Flashabdle.zip. You need a zip file.
3> Step 2. After this connect you phone to the PC and Move the Oxygen_1.0.0_Flashabdle.zip file on your phone.
4> After this turn off your phone and boot in recovery mode. TO do this Hold Volume down button + Power button.
5> Now you phone will boot in recovery mode.
6> Now after this select Wipe option and and delete Cache, Dalvik cache and data.
7> Now go back and Select Install option and ‘choose zip from sd card’ from the Options.
8> Select the OXygenOS zip file and confirm the installation on next screen.
9> After the flash succeeds, you can reboot the device.
10> Enjoy.
Click to expand...
Click to collapse
will it work?
Sagar_1401 said:
will it work?
Click to expand...
Click to collapse
No, don't believe him! It can brick your device becuause one plus 2 hardware is far away from our grand two! If u don't believe me you can try and receive a boot loop phone!
Click like if i helped!
G.NO_BOYz said:
No, don't believe him! It can brick your device becuause one plus 2 hardware is far away from our grand two! If u don't believe me you can try and receive a boot loop phone!
Click like if i helped!
Click to expand...
Click to collapse
very well but what if my phone got brick how to unbrick it??
and also can u give me link for d twrp grand 2 not xda link direct download link ty
Sagar_1401 said:
very well but what if my phone got brick how to unbrick it??
and also can u give me link for d twrp grand 2 not xda link direct download link ty
Click to expand...
Click to collapse
https://basketbuild.com/filedl/devs?dev=aapav01&dl=aapav01/ms013g/TWRP/TWRP_ms013g.zip
This is a link to download twrp but u need to have cwm or any recovery to flash this recovery!
Click thank if i helped!
it
It is a stock rom of one plus
thanks bro im going to test if and if i got any problem be der for help
---------- Post added at 01:55 PM ---------- Previous post was at 01:43 PM ----------
shahfaishal said:
.
Click to expand...
Click to collapse
bro if der is no flashable md5 how will u flash it -_- u dont need to extract it just copy it in ur mobile
sorry but im a beginner but i have rights to say :/
Sagar_1401 said:
thanks bro im going to test if and if i got any problem be der for help
Click to expand...
Click to collapse
The one plus rom is not compatible with grand 2! So don't flash it, it will make you waste your time and why don't u flash blisspop rom that will be upoload stable rom soon?
G.NO_BOYz said:
The one plus rom is not compatible with grand 2! So don't flash it, it will make you waste your time and why don't u flash blisspop rom that will be upoload stable rom soon?
Click to expand...
Click to collapse
no i have cm 12.1
its better dan blisspop rom but i want oneplus two rom :crying: hope dev's make it
Sagar_1401 said:
no i have cm 12.1
its better dan blisspop rom but i want oneplus two rom :crying: hope dev's make it
Click to expand...
Click to collapse
Yes, but one plus two rom is not compatible and not development yet so u can't flash stock one plus 2 rom! And don't compare any rom! Hope u understand, developer are working hard to make one rom more steble so don't make him another work! If he finished project he will do another project! ?
Hi
Hey s*n of the bi***h
Your problem is easy to solved
BUY YOU A (ONE PLUS TWO PHONE)
and f**k yourself away
Have a good day
Hahah Correct Dom...
1st The Hardware differ's far apart in both devices...
2nd CWM or TWRP won't even start the zip installation(I suppose so)
3rd Even if it were to start, it will eventually fail giving you message about weird sh*t you don't know
4th You Dare to try it and fu*k your phone... You get a boom, The chips and Mother board are fu*cked up...
Oos not good
Sagar_1401 said:
no i have cm 12.1
its better dan blisspop rom but i want oneplus two rom :crying: hope dev's make it
Click to expand...
Click to collapse
I'm using a oneplus two and its a great device. But a major problem with it is that the stock ROM of the phone that is the OxygenOs is too buggy and so the oneplus users are moving to custom roms. So, I would recommend cm12.1..
In addition to this the features of oneplus devices and grand 2 is also very different so it will very difficult to port it.
So in short I can say stay with whatever you have right now. Its the best available at the moment.
Hit thanks If I helped!!
kishan12345 said:
I'm using a oneplus two and its a great device. But a major problem with it is that the stock ROM of the phone that is the OxygenOs is too buggy and so the oneplus users are moving to custom roms. So, I would recommend cm12.1..
In addition to this the features of oneplus devices and grand 2 is also very different so it will very difficult to port it.
So in short I can say stay with whatever you have right now. Its the best available at the moment.
Hit thanks If I helped!!
Click to expand...
Click to collapse
I guess now 1+2 o2 mod has got some updates and buggs and laggs are been fixed isnt it?
Sagar_1401 said:
I guess now 1+2 o2 mod has got some updates and buggs and laggs are been fixed isnt it?
Click to expand...
Click to collapse
Yes the updates have fixed some bugs but still it's buggy for me and some others. And if this ROM is ported to other device then it will be a house of bugs.
Hi,
I will release here my updated "boot.img" files for the Xperia XA Ultra Dual Sim.
You must have an unlocked bootloader to flash with Fastboot.
You don't need to be on the same firmware as the boot image that you want to flash.
You have to flash SuperSu again from TWRP just after flashed new boot to avoid bootloop.
All boot images have "ro.secure=0" and "ro.debuggable=1" in default.prop file
and "forcencrypt" of internal memory switched to "encryptable" in fstab.mt6755 file.
The Fastboot command is:
fastboot flash boot NAMEOFIMAGE.img
Click to expand...
Click to collapse
Follow the guide from @Yooooomi to flash new firmware on your Ultra to avoid bugs and brick: https://forum.xda-developers.com/xa-ultra/how-to/flashing-xa-ultra-flashtool-t3551319
Releases:
12/28/2016: From 36.0.B.2.109 kernel sources and Ramdisk from 36.0.B.2.109 firmware.
https://mega.nz/#!cxI3SJaC!o-aqc2gUZufDJefKaxGRxRhekEq32B1bIDB3ROxyd7Y
04/01/2017: From 36.0.B.2.146 kernel sources and Ramdisk from 36.0.B.2.146 firmware.
https://mega.nz/#!VhwRQLqR!rOqEFWeOC3IQKl4aDw7P_v0U2wmZtBPXk_MSDJMEy9k
hi
Does anyone has tested this ROM?
probably is break my devise, possible if there unbreak?
thanks all.
twhhhco said:
hi
Does anyone has tested this ROM?
probably is break my devise, possible if there unbreak?
thanks all.
Click to expand...
Click to collapse
Hi, it's not a Rom just a boot.img for unlocked bootloaders with stock kernel built from Sony open source archive.
36.2.B.2.109 boot should fix the front camera not focusing after root.
After testing I found out that the boot does have problems
Which are:
1-Screen doesn't turn off completely, it stays at a very dark state which can be noticed in extreme low light conditions and if u turn the screen back on u will notice a a static on the screen and then it functions normally.
2-system brightness level meter doesn't work but third party apps can be used to change that.
Hope that helps and u come with even better boot in the future and thank u in advance.
klengjaua said:
After testing I found out that the boot does have problems
Which are:
1-Screen doesn't turn off completely, it stays at a very dark state which can be noticed in extreme low light conditions and if u turn the screen back on u will notice a a static on the screen and then it functions normally.
2-system brightness level meter doesn't work but third party apps can be used to change that.
Hope that helps and u come with even better boot in the future and thank u in advance.
Click to expand...
Click to collapse
Hi, thank you for the feedback. I don't have any unlocked Ultra (only have a unlocked XA F3112) so I can't test new releases or try to debug anything. I don't make any changes to the kernel source code, only build the kernel and repack it in a stock ramdisk with very small changes for root, nothing more. I hope that an user will be able to fix bugs.
rrvuhpg said:
Hi, thank you for the feedback. I don't have any unlocked Ultra (only have a unlocked XA F3112) so I can't test new releases or try to debug anything. I don't make any changes to the kernel source code, only build the kernel and repack it in a stock ramdisk with very small changes for root, nothing more. I hope that an user will be able to fix bugs.
Click to expand...
Click to collapse
These are the fixes you mentioned?
Nrsoto said:
These are the fixes you mentioned?
Click to expand...
Click to collapse
Yes it's the new boot who fix the front camera bug mentioned in my PM, as you can see in the comments it fix this bug but make an other bug You can flash it if your device is a dual sim. If you try it please say us if you have the same new bug.
rrvuhpg said:
Yes it's the new boot who fix the front camera bug mentioned in my PM, as you can see in the comments it fix this bug but make an other bug You can flash it if your device is a dual sim. If you try it please say us if you have the same new bug.
Click to expand...
Click to collapse
I will do it with f3213
Nrsoto said:
These are the fixes you mentioned?
Click to expand...
Click to collapse
For those who are struggling with the front facing camera, I finally solved it without installing any kernel or modify anything from the system. Downgrade to 36.0.A.1.111 (should be the one one with service unit exchange or smth like that). Had installed gapps stock (but I suggest u don't delete the Sony camera app - Instagram and Snapchat work perfectly fine) + xposed + adoptable storage.
As a final mention my devie is F3211
sexxualization said:
For those who are struggling with the front facing camera, I finally solved it without installing any kernel or modify anything from the system. Downgrade to 36.0.A.1.111 (should be the one one with service unit exchange or smth like that). Had installed gapps stock (but I suggest u don't delete the Sony camera app - Instagram and Snapchat work perfectly fine) + xposed + adoptable storage.
As a final mention my devie is F3211
Click to expand...
Click to collapse
Sorry, how did you do it, my cel no focusing camera frontal before unlocked boot loader , you device Does the same
Nrsoto said:
Sorry, how did you do it, my cel no focusing camera frontal before unlocked boot loader , you device Does the same
Click to expand...
Click to collapse
Here's step by step what I did, I hope it will work for your device too:
1. Go to xperifirm and download the 36.0.A.1.111 firmware (service unit exchange)
2. Create a bundle on the flashtool within the firmware folder
3. Flash it
4. Happy rooting!
There is however something I have to mention about this fw: you'll probably not receive any system updates
IF U ARE A SNAPCHAT USER install Snapchat before messing the system up with xposed
sexxualization said:
For those who are struggling with the front facing camera, I finally solved it without installing any kernel or modify anything from the system. Downgrade to 36.0.A.1.111 (should be the one one with service unit exchange or smth like that). Had installed gapps stock (but I suggest u don't delete the Sony camera app - Instagram and Snapchat work perfectly fine) + xposed + adoptable storage.
As a final mention my devie is F3211
Click to expand...
Click to collapse
Since you've mentioned snapchat allow me to ask. I'm on stock and I've just received the 36.0.B.2.109 update (hings are kinda slow in Egypt).
But no matter how many updates I get, snapchat quality is terrible on the front facing shooter. It's only good when it's really sunny. Other than that it's extremely dark to the point that sometimes you can't even recognize faces ! Have you ever run into that ? If yes or no what do you recommend ?
Talal Tango said:
Since you've mentioned snapchat allow me to ask. I'm on stock and I've just received the 36.0.B.2.109 update (hings are kinda slow in Egypt).
But no matter how many updates I get, snapchat quality is terrible on the front facing shooter. It's only good when it's really sunny. Other than that it's extremely dark to the point that sometimes you can't even recognize faces ! Have you ever run into that ? If yes or no what do you recommend ?
Click to expand...
Click to collapse
I had one bug with snapchat on the same firmware you are using but it was more app related rather than a camera quality issue. every time I opened sc the image would tend to get darker (not to mention the app itself was kinda slow) and the only fix I could find is moving the app back to internal storage (but again, this was an app bug). the only thing i can tell you is experimenting with other fws until you find one that could fix your issue, otherwise sorry but i have no idea.
sexxualization said:
I had one bug with snapchat on the same firmware you are using but it was more app related rather than a camera quality issue. every time I opened sc the image would tend to get darker (not to mention the app itself was kinda slow) and the only fix I could find is moving the app back to internal storage (but again, this was an app bug). the only thing i can tell you is experimenting with other fws until you find one that could fix your issue, otherwise sorry but i have no idea.
Click to expand...
Click to collapse
I've had this issue on all firmwares up until the one i mentioned. And yeah i didn't even use my external usage yet, so it seems that im having a different issues although we both got dark images. I would try different firmwares but I dont know what sony did to make the battery much better on the recent firmware. I'll try messing around till I find the culprit.
Thanks.
Buggy with f3216...please fix
Help Downgrading to .111
So I've download the .111 service exchange unit firmware from Xpefirm, and created a bundle to flash it through flash tool, this is what I get in the attachment. What wrong am I doing here ? This is my first time dealing with Xpefirm so please guide me on what do from here
Hi !
I've tested that because I really like root and it's works for me, but I have one problem with snapchat, when I try to connect I get this message :
I don't have xposed on this phone, just the root, and if I delete the root, it's the same problem.
Have you a solution for that ?
Thank you !
Pandawa3 said:
Hi !
I've tested that because I really like root and it's works for me, but I have one problem with snapchat, when I try to connect I get this message :
I don't have xposed on this phone, just the root, and if I delete the root, it's the same problem.
Have you a solution for that ?
Thank you !
Click to expand...
Click to collapse
By deleting root, I assume you tried to delete the root app not root access itself.
You have to go back to stock rom, install snapchat, log in, root your phone and never log out.
szucsi1996 said:
Buggy with f3216...please fix
Click to expand...
Click to collapse
Hi, how is it buggy? I would like to root my f3216, thx.
Aphex33 said:
Hi, how is it buggy? I would like to root my f3216, thx.
Click to expand...
Click to collapse
i think, don't do it!
edit: Brightness adjustment not working, ui very buggy, etc.
Hi, i read this notice
https://twitter.com/topjohnwu/status/1032673806622617600
I'm furious, i bought Honor View 10 for modding, because Honor had to give the phone to many developers for expand the modding on their devices. Then first Huawei stop the possibility to unlock bootloader and now stop the possibility to have root also?
It's incredible, Huawei/Honor should repay who bought the device before their decision to stop the modding scene.
Honor clearly didnt work closely with Huawei when it comes to that modding/rooting related stuff
after Honor dev program they locked bl's for good, and now trying to prevent ROOT by adding system app to check for Root then force remove it or stop it
hopefully we can find a work around it :\
alboz83 said:
Hi, i read this notice
https://twitter.com/topjohnwu/status/1032673806622617600
I'm furious, i bought Honor View 10 for modding, because Honor had to give the phone to many developers for expand the modding on their devices. Then first Huawei stop the possibility to unlock bootloader and now stop the possibility to have root also?
It's incredible, Huawei/Honor should repay who bought the device before their decision to stop the modding scene.
Click to expand...
Click to collapse
Just don't do the OTA update and/or flash a custom rom
Nimueh said:
Just don't do the OTA update and/or flash a custom rom
Click to expand...
Click to collapse
But this is not fair, many of us bought a huawei device for modding, and now we are stucked with no options to reclaim anyting, Honor View 10 in my case has cost me around of 500€, took time for me to get this money (part time job, studing, and living alone), it's hard for me to believe that the reply of Huawei is deal with it, good luck next time loser.
This tweet was pertaining to a Chinese variant. @MishaalRahman with XDA is investigating, as there is no official word if this sort of update is coming to other regions or even the US. This may have been done by mistake as well.
There have been other Chinese variants that have received a "patch1" type update, but has been confirmed those other updates are bug fixes and are not rooted related.
I'm sure XDA will make a write up to clarify if/when there is more info
Jofer97 said:
But this is not fair, many of us bought a huawei device for modding, and now we are stucked with no options to reclaim anyting, Honor View 10 in my case has cost me around of 500€, took time for me to get this money (part time job, studing, and living alone), it's hard for me to believe that the reply of Huawei is deal with it, good luck next time loser.
Click to expand...
Click to collapse
Your complaints will do absolutely nothing on XDA ... contact your local Huawei dealership or post pubically on their social media pages like Facebook or Twitter. Only if it's made public (by enough people) will there be even the slightest chance of them changing their @&%$§!* new policies.
The View 10 seemed so promising earlier this year which is why I bought it ... my first and at this rate definitely my LAST ever Huawei device
Nimueh said:
Just don't do the OTA update and/or flash a custom rom
Click to expand...
Click to collapse
Yes i can, in fact i have disable update app from Titanium backup, and Yes i can flash custom rom. But the modding scene is not really good, first we don't have a twrp 100% working and for me slowly the modding will be abandoned because nobody will buy Huawei or Honor.
alboz83 said:
Yes i can, in fact i have disable update app from Titanium backup, and Yes i can flash custom rom. But the modding scene is not really good, first we don't have a twrp 100% working and for me slowly the modding will be abandoned because nobody will buy Huawei or Honor.
Click to expand...
Click to collapse
We don't need TWRP and we most definitely have a bunch of great roms - and they won't get abandoned any time soon.
Check the OpenKirin link in my signature ... I've been running their Resurrection Remix with Magisk for months now without any issues ... and without needing TWRP :victory:
OpenKirin has several great roms, I'm sure you'll find one that suits you too :fingers-crossed:
Nimueh said:
We don't need TWRP and we most definitely have a bunch of great roms - and they won't get abandoned any time soon.
Check the OpenKirin link in my signature ... I've been running their Resurrection Remix with Magisk for months now without any issues ... and without needing TWRP :victory:
OpenKirin has several great roms, I'm sure you'll find one that suits you too :fingers-crossed:
Click to expand...
Click to collapse
Nimueh i have a question. I'm curious of RROS of OpenKirin, but Xposed works? Do you know if substratum works also? I tried a few time ago RROS taken from XDA but Xposed and substratum didn't working.
alboz83 said:
Nimueh i have a question. I'm curious of RROS of OpenKirin, but Xposed works? Do you know if substratum works also? I tried a few time ago RROS taken from XDA but Xposed and substratum didn't working.
Click to expand...
Click to collapse
Substratum works great because RR has all the commits that are needed.
Xposed isn't officially supported (by pretty much ANY custom rom), so no idea if it works ... I never had the need to use it myself
Nimueh said:
Substratum works great because RR has all the commits that are needed.
Xposed isn't officially supported (by pretty much ANY custom rom), so no idea if it works ... I never had the need to use it myself
Click to expand...
Click to collapse
Thank you very much, great that substratum works. Maybe i'll try RR and i'll try if Xposed working because i love a module to chance status bar icon.
alboz83 said:
Thank you very much, great that substratum works. Maybe i'll try RR and i'll try if Xposed working because i love a module to chance status bar icon.
Click to expand...
Click to collapse
Plenty of substratum themes do that already though, no need for xposed just for that.
See you in the Openkirin Telegram group
have they started doing this yet? i usr this command to flash twrp and it says it worked it will go into twrp for like 10 sec and reboot to fastboot.... fastboot flash recovery_ramdisk TWRP.img yes thats what my twrp is named
The original person who reported on this new "patch1" update to the ramdisk is still testing to see whether it's an intentional feature to block root, or if Magisk no longer working is just a side effect to ramdisk changes. We're waiting to see the results of their testing.
is there a software version to see if my phone possibly has it on it?
---------- Post added at 10:46 PM ---------- Previous post was at 10:35 PM ----------
says im on build bkl-lo4 8.1.0.120 "c567" emui version 8.0.0 android 8.1.0 security patch july 1st kernal 4.4.103+ tues july 17th
[email protected]_USA said:
This tweet was pertaining to a Chinese variant. @MishaalRahman with XDA is investigating, as there is no official word if this sort of update is coming to other regions or even the US. This may have been done by mistake as well.
There have been other Chinese variants that have received a "patch1" type update, but has been confirmed those other updates are bug fixes and are not rooted related.
I'm sure XDA will make a write up to clarify if/when there is more info
Click to expand...
Click to collapse
Indian variants too received patch1 updates for few models not just honor v10
Nimueh said:
We don't need TWRP and we most definitely have a bunch of great roms - and they won't get abandoned any time soon.
Check the OpenKirin link in my signature ... I've been running their Resurrection Remix with Magisk for months now without any issues ... and without needing TWRP :victory:
OpenKirin has several great roms, I'm sure you'll find one that suits you too :fingers-crossed:
Click to expand...
Click to collapse
Any rom for BKL-L04, what I saw was for bkl-l09.
Thanks
And telegram is not working I want to join
jesbu said:
Any rom for BKL-L04, what I saw was for bkl-l09.
Thanks
And telegram is not working I want to join
Click to expand...
Click to collapse
No, I think BKL-04 isn't supported atm.
And what do you mean TG isn't working? Working fine here
Nimueh said:
No, I think BKL-04 isn't supported atm.
And what do you mean TG isn't working? Working fine here
Click to expand...
Click to collapse
BKL-04 isn't supported on Kirin? thats funny my BKL-04 is on it now so far all works that ive seen LTE etc
leo5111 said:
BKL-04 isn't supported on Kirin? thats funny my BKL-04 is on it now so far all works that ive seen LTE etc
Click to expand...
Click to collapse
Ah ok, that's cool - last I heard only BKL-09 was supported. But I can't say I've been keeping up since I have the EU version anyway and never paid much attention to which rom was working on the US version :angel:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?