My Stratos 3 is currently running 4.2.2.0 firmware.
Today Amazfit app has notified me a new firmware available: 4.2.2.1, but when I choose to upgrade, the watch looks for latest version and says it's on the latest.
Is there any way to force the discovery? I'm currently facing problems to sync sport activities between the watch and the Amazfit App and I'd like to test the new firmware to see it solves those problems.
factory reset, it worked for me
Johny70 said:
factory reset, it worked for me
Click to expand...
Click to collapse
Hi Johny, did you do anything else? I have done already like 10 factory resets, and the only thing I get after the incredibly fast firmware download is "Coudn't download updates, try again", and if try again, "Current version is up to date", once and once again
I'm losing my nerves with this watch, it works really bad
I'm in the same problem... I did 3 favtiry resets without any result. After a factory reset wath download firmware but appears a download error and stops... My watch version is A1929.
Another stranger thing is inthe amazfit app apeears a message to download the lastest version everytime.:crying:
Make sure watch can connect to Wi-Fi properly, otherwise it won't download the update. You can connect it in the settings on watch (of course).
Thanks for your reply.
The download finishes to 100% but when it try to install appear the download fail message... The wifi connection is on, and it seems to download all the firmware.
It can be a servet fail or similar. But it download to the 100%, I don't understand... I try 4 times factory reset and delete amazfit app to in mobile with same result.
If you know how to use adb, you can try this:
1. Connect the watch to the computer using USB
2. Make sure you have a file named "update.zip" on watch's internal storage after it reaches 100% downloading
3. Check if adb is working with:
Code:
adb devices
4. If it does, try to start the update with this other command:
Code:
adb reboot update
It was very very weird.
When I was at home, my watch always told me it was on the latest version, but when I tried again far from home, it detected the new version (but I didn't have a Wifi around to download).
I then used my mobile Wifi tethering but I received an error on OTAUpdate module.
I did a Factory reset and I downloaded and installed it perfectly.
Really weird indeed... I was able to update also by tethering, wifi at home or office didn't work, so thanks for your help
Hi.
Finally I can update, I explain the steps I have done.
1-factory reset
2-pair the phone with amazfit app.
3- select the update in the amazfit app ( not the stratos, because if you select in ther fails)
4- put password wifi and update.
The most extrange thing is because the same steps I done 6 or 7 times before, with the same wifi connection.
Luck!
no need in factory reset, there was a bad file pushed to the OTA. it was replaced, everything should work out of the box.
I'm still not able to update but that looks like different issue.
When I try to enter wifi password in Amazfit app, press tick mark on keyboard it does nothing. On phone keyboard closing, window to enter password still there with password entered (no ok or other button) and Stratos 3 still waiting for password.
Maybe that is some incompatibility with Android 10 in Nokia 8.1?
Same issue.. Disappointed with this watch
Same issue here. The updated worked for 4.2.2.0 after many attempts but not the 4.2.2.1. I tried using the watch directly or the app.
Also, the watch quality is poor. GPS doesn't work properly for running even if trying different GPS combinations (GLONASS, GALILEU,)
I had the Amazfit Pace and it was great comparing with this one.. Really disappointed.
Really, so it suffers the same flaw as GTR/GTS? Another Huami failure?
lfom said:
Really, so it suffers the same flaw as GTR/GTS? Another Huami failure?
Click to expand...
Click to collapse
Yes.. Just saw other pages about GTR / GTS. Exactly the same.
It takes a long time to get signal and I even had a run of app. 7 km that the watch recognized as about 13 km.
Doesn't seem like an easy and quick fix either..
I'm about to action the warranty..
leugim1 said:
Yes.. Just saw other pages about GTR / GTS. Exactly the same.
It takes a long time to get signal and I even had a run of app. 7 km that the watch recognized as about 13 km.
Doesn't seem like an easy and quick fix either..
I'm about to action the warranty..
Click to expand...
Click to collapse
just got mine i can definitly say there's nothing to do with GTR (sent it back)... accruacy is very good on this watch.
winni21 said:
just got mine i can definitly say there's nothing to do with GTR (sent it back)... accruacy is very good on this watch.
Click to expand...
Click to collapse
What is the firmware version you have running?
How many times did you try?
I'm 4.2.2.1 got it upgrade first time I boot.
Tried 2 or 3 times accuracy is good. GPS+Galileo (I'm french)
But I'm facing some bugs (due to early fw) the time of my workout it 1 hour sooner in amazfit app (if I do it at 15h00 it's displayed at 14h in amazfit app) in the watch it's ok.
I had also to disable "workout synced notification" because it was never stopping to send notification)
Last think I've noticed some notification are double sent: ex Gmail
But has I said the watch was first only in English French language came with latest fw. Some of you have those bugs?
winni21 said:
I'm 4.2.2.1 got it upgrade first time I boot.
Tried 2 or 3 times accuracy is good. GPS+Galileo (I'm french)
But I'm facing some bugs (due to early fw) the time of my workout it 1 hour sooner in amazfit app (if I do it at 15h00 it's displayed at 14h in amazfit app) in the watch it's ok.
I had also to disable "workout synced notification" because it was never stopping to send notification)
Last think I've noticed some notification are double sent: ex Gmail
But has I said the watch was first only in English French language came with latest fw. Some of you have those bugs?
Click to expand...
Click to collapse
Yes, working good, but same bugs (French too)
- Receiving notifications twice
- Sync notification cannot stop
Good to know!
For those who want a view of GPS tracking, here is a screenshot:
https://photos.app.goo.gl/cb72otiBWY5XsrLSA
Related
Hello developers,from last 5 days my amazfit touch screen not working.Its getting charging and even displays time.I tried to restart it 100 times but no use.I drained the battery and charged it 100% but still no use.Anyone please help.
Found a solution
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
I try unpaired watch but touch not work,
bsvinod said:
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ya it's work thanks bro its Diwali biggest gift thank you again
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
hajduk78 said:
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock?
Still no response
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
yunussalman said:
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
watch model
lfom said:
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
Click to expand...
Click to collapse
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.No,i haven't tried to flash its still stock.
Thanks in advance
yunussalman said:
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.
Thanks in advance
Click to expand...
Click to collapse
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
No at present i have unpaired it.
lfom said:
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
Click to expand...
Click to collapse
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
yunussalman said:
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
Click to expand...
Click to collapse
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
I Tried with other phones and other apps
lfom said:
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
Click to expand...
Click to collapse
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
I also have the same problem. Touch screen is not working. Pace 2.6.2.0. Pace is normally charging, no flickering on the screen. I have unpaired it with the phone, but no possibility to pair it again since I can't tell to confirm pairing number.
Poslano sa mog MI 6 koristeći Tapatalk
yunussalman said:
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
Click to expand...
Click to collapse
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
yunussalman said:
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
Click to expand...
Click to collapse
If it's paired with phone, go to Amazfit app -> My Watches -> More and tap on Unpair (it will erase all data on watch).
Or use the remote control app to go to Settings -> Device and choose factory reset. But I thought you had already done this (factory reset)...
Dear developers,
i have tried everything and at last my watch has been working its been updated 4 times and at present the version is 2.8.0.5
previously it was 1.2.6.0 or something.....its been working but sometimes the touch is not working,if i left it aside and after 10 to 15 minutes or after i restart it then it will work.
can you guys help me for this?
we can say that screen is flickering(making small quick moments).
please help
Anyone please help....iam a fitness freak and i badly need it to get repaired
Amazfit screen not showing anything
Hello, I'm writing hoping someone can help me.
My pace it's broken or so it seems, like it is turned on but not showing anything on screen. In first it seemed dead but was connected to my phone and counting steps but nothing on screen.
When receiving notifications it was vibrating as usual but again nothing on screen.
If I turn it off it shows battery charging, when I turn is on shows Amazfit logo but after screen shutsdown and nothing appears.
I have it unpaired now and can't pair again...
I have unlocked boatloader and reflashed latest us tomorrow but... Same behavior, did this appened to someone, or can someone help?
Thank you
lfom said:
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
hi , anyone had any sucess with this app? the remote screen . ? i cant get it to work and also have the same problem with the stratos touchscreen , but half of the right side does not work
Hello,
Guys i have a problem with the notifications on my Amazfit Pace (international version).
This happens very but very often. Whenever i receive a notification my amazfit app disconnects and reconnects immediately therefore the notification is not pushed to the watch. I tried all of the following:
1. I have tried every single version of Amazfit App and nothing seems to work.
2. I have unlocked the bootloader and installed Pacefied v2.6.4.1 (stable) and the problem still occurs.
3. I have Huawei Mate 10 Lite with EMUI 8.0 . I have tried EVERYTHING (ignore battery optimisation and manual launch of background processes etc..). Nothing seems to work.
This problem doesnt allow Amazmod to work fine on my watch and i am restricted. The problem also occurs with WatchDroid.
HOWEVER, i tried the AMF Notification system for my Pace and works perfectly. I get all notifications on my watch, no disconnections at all, however , i just dont like the interface of it!
Any ideas?
It is an issue with firmware/Amazfit app. You have to wait for new versions, or only use "standard notifications" (either in AmazMod or use Amazfit for notifications).
lfom said:
It is an issue with firmware/Amazfit app. You have to wait for new versions, or only use "standard notifications" (either in AmazMod or use Amazfit for notifications).
Click to expand...
Click to collapse
Thank you so much for your reply! Do you know any other members of experiencing the same problem?
I have tried to use only Amazfit without amazmod or any other service and the problem occurs. I have also tried to use amazmod only with the amazfit application to be off and again I experience the same issue. This happens for over a year now since I bought the watch
Try stock firmware with latest Amazfit from PlayStore, or stock CN firmware with latest Amazfit from Mi.com: I have Pace running AmazeROM (which is basically stock CN) connected to a phone with EMUI 8.0 too, and it much better since a few versions of Amazfit ago...
lfom said:
Try stock firmware with latest Amazfit from PlayStore, or stock CN firmware with latest Amazfit from Mi.com: I have Pace running AmazeROM (which is basically stock CN) connected to a phone with EMUI 8.0 too, and it much better since a few versions of Amazfit ago...
Click to expand...
Click to collapse
Do you have any problems with it? I had pacefied and and now I am using AmazIT which I still have the same problem... Do you have the same problem that I have as well? Disconnecting for no reason?
Guys any news?
No problems here using EMUI 8.0 and latest CN Amazfit and firmware (2.6.5.0). You must use only one kind of notifications: either standard (no replies) or custom (with replies). Do not try to use AmazMod when Amazfit app is syncing with phone or it may make the service freeze.
AmazMod only is supported in stock firmware, if you use a custom ROM then you are on your own trying to fix any problems...
I have this exact issue and it's driving me nuts.
I have a Pace A1602, ROM verison 2.6.5.0v1.1, unlocked, running PACEficator Project | WOS 2.6.5.0 ROM.
I don't use AmazMod or the other mod. I use the standard Amazfit app for sending notifications.
Very often, my watch disconnects, then instantly connects again. When I check my phone, it has a new message that should have been pushed to the phone.
How do I go about fixing this?
chaozz said:
I have this exact issue and it's driving me nuts.
I have a Pace A1602, ROM verison 2.6.5.0v1.1, unlocked, running PACEficator Project | WOS 2.6.5.0 ROM.
I don't use AmazMod or the other mod. I use the standard Amazfit app for sending notifications.
Very often, my watch disconnects, then instantly connects again. When I check my phone, it has a new message that should have been pushed to the phone.
How do I go about fixing this?
Click to expand...
Click to collapse
It's not a problem with the watch, but with the phone: some phones have interferences between WiFi and BT, notably some Huawei and Samsung phones. Or you didn't configure it correctly and Amazfit is being killed while in the background, this usually happens with Android 8.0+, MIUI and EMUI.
It's a Huawei phone. What is the best way to go about this? Disabling WiFi is not really an option, for obvious data cost reasons.
Also, I used this same phone without any issues with a Pebble 2 SE. Never any disconnects.
chaozz said:
It's a Huawei phone. What is the best way to go about this? Disabling WiFi is not really an option, for obvious data cost reasons.
Click to expand...
Click to collapse
First, disable WiFi for a while to test if it's the problem. If you confirm it is, try connecting to a 5GHz WiFi network. If it doesn't happen, your only choice it to write to Huawei and Huami about the issue, Huami is aware of the problem (it is plaguing a lot of Samsung users, it is not their fault but they may be able to add a workaround in Amazfit app).
Guys in my opinion its not a wifi issue since i have an amazfit bip and it works perfectly with the mifit app and Notify. It happens only with amazfit app and pace. I believe (without being a programmer) it has to do with the notification system of the watch. Maybe its because we own mid range phones. If you use AMF notification system on pace it works perfectly. I have tried WatchDroid as well and it has the same problems with the amazfit app as well.
New Amazfit Verge US/Global/International 3.2.0.20 Firmware bug
Don't update to this version as double tap to wake the screen doesn't work.
Seems to affect to original US watches only
Same think for me . Can i make a downgrade to 3.2.0.13
Amazfit engineers clearly do not even do basic testing before releasing.
I have found so many bugs and reported so many but it's really pointless - they do not seem to have the S/W engineering skills to fix or test any fixes.
As a Stratos user, the last good firmware was 2.3.5.0 - every release since just added more bugs!
The message here is that just do not update without a VERY good reason, as there is a very good chance, the newer release will be worst than previous.
AFAIK, it affects to original US watch users only, those CN watch users who flashed the US/Global/International firmware are not facing this bug.
I'm 99% sure the issue is related to the bootloader, they used the Chinese one, which is known to have this issue (from users report on my ROM) on original US watches.
If anyone interested with already unlocked bootloader, just let me know to test a fix.
Meanwhile, don't update if you mind double tap to wake and wait for an official fix from Huami.
You can send an email to Huami support, to inform them about this bug on their latest firmware: [email protected]
OK, but DTTW is the smalest problem. I dosent use this
3.2.0.24 is in the huami forum. The problem ist that you dosent recive this in europa if they dont like
Saratoga79 said:
AFAIK, it affects to original US watch users only, those CN watch users who flashed the US/Global/International firmware are not facing this bug.
I'm 99% sure the issue is related to the bootloader, they used the Chinese one, which is known to have this issue (from users report on my ROM) on original US watches.
If anyone interested with already unlocked bootloader, just let me know to test a fix.
Meanwhile, don't update if you mind double tap to wake and wait for an official fix from Huami.
You can send an email to Huami support, to inform them about this bug on their latest firmware: [email protected]
Click to expand...
Click to collapse
Thanks for the email
I also hope they create English forum like Xiaomi has.
time bug in 3.2.0.20
hello,
hello, my watch verge with Firmware 3.2.0.20 have any Bugs,
Big Problem : time in standby mode is wrong on Display !!! 1 hour difference !!!
best regards
videojochen said:
hello,
hello, my watch verge with Firmware 3.2.0.20 have any Bugs,
Big Problem : time in standby mode is wrong on Display !!! 1 hour difference !!!
best regards
Click to expand...
Click to collapse
Yes, this happens due to a time change last night. Just reboot the watch and it will synchronize the times.
Saratoga79 said:
If anyone interested with already unlocked bootloader, just let me know to test a fix.
Click to expand...
Click to collapse
I'm interesting to test a fix
I use 1811 global version.
Nono. These 1hour Problem exist longer that summer time. Sometimes it happend, dont now why.
Tha battery drain in *.22 is hard. >15% a day with nothing as wearing the watch.
Ringtone issue.
The problem exists with the old update and the new update - 3.2.0.20
On inactive display - on incoming call - sounds bad. When the active (lighted) display - when incoming call - rings normally. There is a ringing problem when the display is off.
kkeonline said:
I'm interesting to test a fix
I use 1811 global version.
Click to expand...
Click to collapse
It doesn't seem to work so... Let's wait for an update this week.
Saratoga79 said:
It doesn't seem to work so... Let's wait for an update this week.
Click to expand...
Click to collapse
OK, thank bro.
3.2.1.0 firmware available
New firmware 3.2.1.0 available. Solves two-touch screen unlock issues.
Not tested yet.
Bug fixed on latest 3.2.1.0 version.
Just received the update 3.2.1.0 and it work
I'm having a problem with Update 3.2.1.0, the continuous HR on the clock this function, and the sleep monitor also on the clock this works, but when synchronizing with the cell phone, in the AmazFit Watch application, does not show the data of the continuous HR nor sleep data. I've done the Factory Reset and still continues with this problem. What may be happening.
Wat i noticed. With some internal watchfaces it feels like a battery drain.
With Neon or "inutest Thing" im round about 15-20% a day. With a digital from amazftwatchface im around 8% a day.
sstsbg said:
Ringtone issue.
The problem exists with the old update and the new update - 3.2.0.20
On inactive display - on incoming call - sounds bad. When the active (lighted) display - when incoming call - rings normally. There is a ringing problem when the display is off.
Click to expand...
Click to collapse
Have you solved this? I thought i was the only one! Even the notification ring sounds bad sometimes
laffsj said:
I'm having a problem with Update 3.2.1.0, the continuous HR on the clock this function, and the sleep monitor also on the clock this works, but when synchronizing with the cell phone, in the AmazFit Watch application, does not show the data of the continuous HR nor sleep data. I've done the Factory Reset and still continues with this problem. What may be happening.
Click to expand...
Click to collapse
I saw the same. After every unpair or reset of watch probably all yours activities is counting from that day when you pair it again or resetted. Yours old activities is saving in Watch App and watch, but when you did reset or unpair that day is not saved. I saw that after few reset and unpair. I can't understand why, but probably this is must be.
---------- Post added at 12:19 AM ---------- Previous post was at 12:14 AM ----------
Hexxer said:
Wat i noticed. With some internal watchfaces it feels like a battery drain.
With Neon or "inutest Thing" im round about 15-20% a day. With a digital from amazftwatchface im around 8% a day.
Click to expand...
Click to collapse
When i talked with Amazfit support they siad me watch face don't having any effect to battery life, a little bit strange cos my battery drained faster as usualy with "spiked" watch face only. When i bought watch i could don't charge battery about 4 days, now after latest update i must charge battery after alsmost 2 - 3 days. Amazfit support explaining that as my changed usuage, my changed settings and ect. But these all things wasn't changed at all. With the same activity, settings before i update to latest version battery i could not to charge about 4 days.
Hi,
just got new firmware today
Some Workout optimisation for Ultra mode, notification optimisation, bug fixes.....
lets see how it works
I've updated yesterday - everything's fine. Seems they've also changed the calorie count function - it appears it's also counting calories burnt during normal activities, not only sport.
hi
unfortunately i'm not able to update. it shows me checking for updates .... and nothing i've tried serval times, factory reset, i've change phone, settings on access point to autochanel, not able to connect watch with wifi at all... MODEL A1929 ROM 4.2.2.1
Hello, exactly the same problems and the same configuration (MODEL A1929 ROM 4.2.2.1 - Living in France)
careful with update
winni21 said:
Hi,
just got new firmware today
Some Workout optimisation for Ultra mode, notification optimisation, bug fixes.....
lets see how it works
Click to expand...
Click to collapse
Already updated. Has an issue at least pairing activities. I have a run of 11 km that show up correctly in the watch but in the app Amazfit and Strava is only 8 km... I know it was 11 km also.
Problems continue..
Fw 4.2.4.0 out
Juste got update today
Many more improvement and new watch faces.
leugim1 said:
Already updated. Has an issue at least pairing activities. I have a run of 11 km that show up correctly in the watch but in the app Amazfit and Strava is only 8 km... I know it was 11 km also.
Problems continue..
Click to expand...
Click to collapse
gps issues? I thought stratos 3 had good gps
Non gps issue for stratos 3 all is ok
iseeka said:
gps issues? I thought stratos 3 had good gps
Click to expand...
Click to collapse
The GPS accuracy has significantly improved after the last 2 updates. At the moment GPS is very accurate and fast to capture signal.
However, the watch still has many firmware issues. For example, at the moment after a lap is counted during a race, the rest of the race is all messed up (not fully counted in the app although all good in the watch, the KM pace is 0:00, etc.)
I was expecting the watch would be only launch once a stable system was in place and after owning it for months I feel we are doing the software development tests ourselves...
This was very disappointing. I had the Amazfit Pace 1 and was really happy about it but cannot recommend this watch.
leugim1 said:
The GPS accuracy has significantly improved after the last 2 updates. At the moment GPS is very accurate and fast to capture signal.
However, the watch still has many firmware issues. For example, at the moment after a lap is counted during a race, the rest of the race is all messed up (not fully counted in the app although all good in the watch, the KM pace is 0:00, etc.)
I was expecting the watch would be only launch once a stable system was in place and after owning it for months I feel we are doing the software development tests ourselves...
This was very disappointing. I had the Amazfit Pace 1 and was really happy about it but cannot recommend this watch.
Click to expand...
Click to collapse
i also see this kind of bug all is ok on the watch but in amazfit app shows different things... i'm not sure it only concern Stratos 3. Amazfit App needs to be improved.
Anyone got amazmod or watchdroid working installed them but they don't show up on the watch anywhere
ROZATOM said:
hi
unfortunately i'm not able to update. it shows me checking for updates .... and nothing i've tried serval times, factory reset, i've change phone, settings on access point to autochanel, not able to connect watch with wifi at all... MODEL A1929 ROM 4.2.2.1
Click to expand...
Click to collapse
>>> 4.2.6.0 Fix the Wifi problems !!!
Hi all,
I have been experiencing issues with the notifications on my Stratos 3 for a couple of weeks. Very often there is a big delay from when I get the notifications on the phone to when the notifications are shown on the watch. Another problem is that I get the same notifications again on the watch some time after (even if the notifications are already gone on the phone). Also very often notifications stay on the watch after being cleared on the phone.
I have checked that Zepp app is not battery optimized and that it has access to notifications. Not sure if there is some other permission that needs to be granted which might have lost when changing from Amazfit to Zepp.
I didn't have any issues with amazfit app, I think this started when they changed the app to Zepp....
Anyone else encountered the same issues?
I'm having the same issues with Stratos 3.
However, I had them already with the amazfit app.
I'm using it with the Galaxy Note 10+. Also battery optimization is off and all other permissions given.
Notifications work normally in ultra mode!
Any help is highly appreciated.
Mmm then it could also be related to the 4.2.7 firmware update that I did recently.
I have enabled the phone anti-lost feature and I noticed that the watch is constantly loosing connection even if it is 10cm far from the phone.
My phone is a Moto One Action
kulaki0 said:
Mmm then it could also be related to the 4.2.7 firmware update that I did recently.
I have enabled the phone anti-lost feature and I noticed that the watch is constantly loosing connection even if it is 10cm far from the phone.
My phone is a Moto One Action
Click to expand...
Click to collapse
My first firmware was 4.2.6.0 and I had the problem already.
I read it was better with 4.2.5.0... but I don't really understand how to downgrade.
I have a Galaxy note 10+ Deactivating "find my mobile" didn't have any effect for me.
After updating to 4.2.8 I have the same issues with the notifications and lost connection frequency.
I will raise a bug on the Zepp app and hope it is looked at
Hey there,
I had the same problem, and Zepp was configured to be battery optimized...
I turned it off and now everything is fine !
arbaus said:
Hey there,
I had the same problem, and Zepp was configured to be battery optimized...
I turned it off and now everything is fine !
Click to expand...
Click to collapse
Hi! I have the same issue and I had battery optimization "ON" for Zepp, turned it off and..no result. I believe its either a bug on the firmware or some minor tweak required on the ROM( its a custom ROM, not stock). But with the Stratos 2, same phone, same ROM, no issues whatsoever...
Guys, massive improvement: tried with an older Zepp version (Amazfit 4.7.1) and even if I havent tested WhatsApp notifications all the others are super fast and I had zero connection lost warnings! Wish you all the best of luck!
Hi guys,
COuld you dump your firmware and upload?
The only way I could receive notifications properly was using Amazmod (sorry if you own an iPhone) and turning off everything related to graphics/images in notifications. They are some seconds late, but still usable though.
farrayoles said:
Guys, massive improvement: tried with an older Zepp version (Amazfit 4.7.1) and even if I havent tested WhatsApp notifications all the others are super fast and I had zero connection lost warnings! Wish you all the best of luck!
Click to expand...
Click to collapse
Dude, thanks a lot, the only thing I didn't tried, except for factory reset the phone, was an older version of the app. I could only find Amazfit Watch 2.7.2, but it's working flawlessly with it, watch is first Stratos