One handed use while in dual screen case? - LG G8X ThinQ Questions & Answers

How balanced is the phone in one hand when the second screen is folded all the way back?
I use my current phone one handed most of the time. I don't want to get the LG G8X and then take it out of its case; I wish to leave it in the dual screen case all the time and just fold the secondary screen all the way around.
What do you think?
Not sure it's worth the upgrade from an S9+ or not, so would love your feedback!!

It's most definitely usable one handed. It's a rather boxy/large cumbersome feel when yo have the screen folded over to the bank. It's rather wide, and a bit thick. At least in my hand, is a bit uncomfortable. I use it this way sometimes, but not for long as my pinky gets tired of supporting it. It will be much bulkier than your s9+ (in the case). Outside the case it feels really nice and is very compact.

Thanks for the good information; I think it may be wise for me to simply wait for the S11 next year instead of jumping on the G8X

Phone is too big with dual screen case. I can't even put it into car mount! Too thick too wide...

apow12348 said:
Phone is too big with dual screen case. I can't even put it into car mount! Too thick too wide...
Click to expand...
Click to collapse
Thick and wide, I agree with you but hopefully, not as thick and wide as the Samsung Galaxy Fold (and with the G8X, you have the possibility to take off the second screen if necessary/wanted).
About the car mount, yours seems to be unuseful with most recent "huge" smartphones because mine is working perfectly with the Dual Screen.

I have large hands and its def a handful...

Related

Tilt2 Praetorian Crystal Slip cover review (Hard-rubberized)

This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.

ZAGG's Invisible Shield: My fresh experience

*Note i have not experienced whether the product lives up to its name or not. I only JUST placed it on my device. This is simply my first impression.
**I included pictures of my device compared to the back parts of the adhesive so you can fully grasp the wonderful "custom to fit" experience.
I just now got as close to perfection as i think i am going to get with placing my "custom to fit" screen protector onto my device. At very first glance i saw that their were going to be some slight imperfections. The random circle on the top right of the adhesive was a dead giveaway. The cut out they have for the top speaker and the bottom row of buttons is hardly CLOSE to the size it should be. It is much too big. I am not sure if it is clear enough in the pictures but their is excess adhesive on the sides. I figured they may be meant to fold down to protect a minuscule amount of siding. At first i could not get it to stick on the sides. But after giving it a few minutes to settle and let the application spray* dry, it seems to be holding. However, the border has really ugly bubbles from the very tony inlay of the front of the phone. The instructions say that MICRObubbles will disappear in their own after a couple days... i hardly find these MICRObubbles though. We will see. I think it is almost supposed to have a "melting" effect on the device. Like heated plastic sort of taking the proper shape over the device.
Now we move onto the back. You will see that i have been given 3 holes instead of 2. (2 being the camera lens and the button underneath). I have no idea what the third was meant for.... I can also forget about taking the backing off of my device as it is now sealed shut with the plastic invisible shield. This doesn't bother me that much since i rarely ever have to take the back out but i know their will be a day where i will need to.
All-in-all the product LOOKS promising still. The bottom line here that i would like to make is that i have NO idea what TouchPro2 they are basing this off of. but it is far from mine. Too far. I need to check but i am also fairly certain they ask for your provider too (in case the device is different than others)
I am also still wondering about the excess sides. it is very random in the back but they make no mention of needing to trim the shield.
*They give you a spray that you use on your fingertips and the adhesive so that a. you dont give it fingerprint smudges and b. it doesnt fully stick right away so that you can "slide" it into place. I found that "sliding" it around was impossible because it still stuck but it did not stick enough to the point i was unable to retry.
I really hope this means something to somebody. Had i read something like this before hand, i may have thought longer on buying the product. I will be sure to write more in the next few days. By the feel of the material on my phone, it seems like it could work really well.
I would also love to know other people's experience with this product and even maybe correct me if anything i complained about was just due to stupidity.
It very much looks like you bought Invisible Shield for the wrong Touch Pro 2 model.
It looks like you have the one for the unlocked/unbranded model:
http://www.zagg.com/invisibleshield/htc-touch-pro-2-cases-screen-protectors-covers-skins-shields.php
When in fact you want the T-Mobile model.
http://www.zagg.com/invisibleshield/htc-touch-pro-2-t-mobile-cases-screen-protectors-covers-skins-shields.php
It looks like the shape of your T-Mob branded TP2 is actually quite different from the unbranded version. The shape of the shield is therefore quite different between the models, based on the pictures on the Zagg website. Also, the layout of the battery cover is totally different, which is why the cutouts on the shield don't match your battery cover. This also accounts for the 3rd small hole on this piece. In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Not to be mean but it's really obvious that it wasn't made for a T-Mobile Touch Pro2 and you should have known that it wasn't the right one.
Just going to the Touch Pro2 forums you can see that there's different versions of the device and ours is usually always referred as the "T-Mobile Touch Pro2" when being specific.
The cover does seem worth buying though.
Yeah i just inquired about it. I did buy the T-Mobile one and they just sent the wrong one.
redpoint73 said:
In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Click to expand...
Click to collapse
Oddly, the Tilt2 had little holes in the back case in the same spot, despite the fact that it is just the battery sitting behind the holes. I always figured it was just a way to give water quick access to the battery compartment to turn that little strip pink incase we ever dropped it somewhere damp...

Any thoughts on the SGP Ultra Capsule?

Does anyone have experience with this case? I know it covers the mic (I plan to drill a little hole).
I just received mine today and I must say I'm very impressed by the quality of the mold they used. Meterial seems top notch. Love this case so far, they also included the new screen protector which is a plus. Ill get pictures up ASAP. I would definetly recommend this case to anyone with an s2.
Sent from my SAMSUNG-SGH-I777 using xda premium
Pictures would be great! I also have a white one on the way, hopefully as I placed an order over the weekend. I intended on modding the thing to get rid/fill in the antenna hole if I ever find the time, too (or find out if it really bothers me that much).
Ok, whats the deal with the corner cutout? I've seen this on several different cases. Does the international version have some sort of pullout antenna?
Case looks nice and classy but for what they are charging they should be offering a case that's specific to the AT&T model.
I recall reading that the corner cutouts are originally for Korean model phones. The antenna was in that area for those phones.
I really like it. It's a nice mix of hard and soft materials. It's flexible, which is nice because it makes removing the case fairly easy (for those of you who want to access the phone's back cover to hot swap batteries).
For the most part, the case feels pretty smooth, which makes getting it out of the pocket an easy process (I previously used the casemate pop case and the rubber sides made it fairly annoying to pull the phone out of the pocket). The case definitely adds more grip to the phone, but overall, it still is a little bit on the slippery side. On the continuum of "slippery vs. grippy" I'd say it's a pretty good balance, but I wouldn't mind it being a little more grippy.
Even though the case is made for the international GS2, it still fits well on the AT&T SG2. The noise-cancelling mic is covered by the case, but I have not had any problems as a result of this. However, you might come into problems if you are trying to use the phone in a noisy environment. I'm a little bothered by the corner cutout for the antennae (for the international SG2) since it really leaves that corner unprotected if the phone happened to fall right on that corner. Then again, i'm just going to take my chances that i'm not going to drop my phone on that exact corner.
The case still keeps the phone very thin and sleek. Also, the case has these tiny sparkle dots that show up on the back of the case, which give off a cool effect when reflecting light. Some may say, they make the case look a little feminine, but I personally don't think they do. In all honesty, you can't even really notice them unless you look close at the case and in the right lighting.
I got the yellow ultra capsule. I've heard one person say that these cases are prone for showing up finger smudges, but at least with my yellow one, finger smudges have not been a problem.
The case covers the volume and power keys. They are still pressable and work fine, but the buttons aren't as sensitive as they are without the case. However, this difference is really negligible for me. Overall, hardware buttons work fine.
I really liked the Body Glove Mirage cases that were made for the Samsung Captivate and the Infuse. In my opinion, this case is just as good as those cases.
can you guys post some pictures? want to see how much it adds to the thickness of the phone.
it does look good from their website though..
Sorry on the delay for the pictures guys, let me know if you need any certain perspectives on some more pictures.
djoutrages said:
Sorry on the delay for the pictures guys, let me know if you need any certain perspectives on some more pictures.
Click to expand...
Click to collapse
what does the unprotected corner look like with that case?

Droid Incredible 4G unboxing video

A friend of mine got his hands on a Inc 4G and posted an unboxing video. I've not seen much for videos about these yet. Just wanted to let the community know:
Figured out the YouTube thing...
Thanks for the video. About the price; according to some info found by sites such as Droid Life the price is looking to be around $149 ($199 with a $50 rebate) instead of the $299 like some people were suspecting which I feel is a lot better. As much as I like this phone and am likely to get it (full retail most likely at $549) I think $299 would scare a lot of people away from what seems to be a mid to low-high range phone.
blaqbird said:
Thanks for the video. About the price; according to some info found by sites such as Droid Life the price is looking to be around $149 ($199 with a $50 rebate) instead of the $299 like some people were suspecting which I feel is a lot better. As much as I like this phone and am likely to get it (full retail most likely at $549) I think $299 would scare a lot of people away from what seems to be a mid to low-high range phone.
Click to expand...
Click to collapse
I let him know. He's working to clear that up. Thanks for the info!
Another video from the same indivdual about the specs and benchmarks and his thoughts after a day's use:
http://www.youtube.com/watch?v=bR_jzcMcjhs&feature=youtube_gdata_player
Sent from my Verizon HTC (holy crap, I can't wait to ditch this phone for the Droid Inc 4G LTE) Rezound.
Great to see this phone's benchmarks come in that close to the One X. Phone is looking good. I love the fact that he did a size comparison to the GNex--putting the phones side by side just proves that there is no way in hell I could comfortably hold that thing...
polarimetric said:
Great to see this phone's benchmarks come in that close to the One X. Phone is looking good. I love the fact that he did a size comparison to the GNex--putting the phones side by side just proves that there is no way in hell I could comfortably hold that thing...
Click to expand...
Click to collapse
I've got the One X myself. I came from a Nexus One initially. When I held the DInc that he had, it honestly felt like holding a TicTac. Its very comfortable holding the One X and a GNex - you'll actually be surprised.
And in the unboxing video, it booted so fast because Fast boot was enabled. Its considerably slower with it disabled.
Sent from my HTC One X using xda app-developers app
jspidey said:
I've got the One X myself. I came from a Nexus One initially. When I held the DInc that he had, it honestly felt like holding a TicTac. Its very comfortable holding the One X and a GNex - you'll actually be surprised.
And in the unboxing video, it booted so fast because Fast boot was enabled. Its considerably slower with it disabled.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I'm gonna say that has a lot to do with the size hands you got and what kind of case you sport, and finally what's your mode of transporting it.
If I was female, probably would think harder about getting the gs3, since I could just throw it in my purse. However, I tote a sack, so I don't have a purse to throw my phone in.
I've got probably normal to slightly smaller hands, another negative for a larger phone.
Lastly, I honestly don't know how you guys transport a phone that's bigger than a Dinc, unless you do NOT pack your phone in a case. When I first bought mine a couple years ago, I bought an otterbox, to protect the investment these phones cost. But it sucks ass trying to transport it. Phones are not what they use to be, and you clip something that is this big to your waist, I'm sorry, I think it looks stupid. Put it in your back pocket, ugh no.
So I ended up getting a case with a clip, and throw it in the front pocket and clip it to pocket seam. But this still is an effort, sitting down, you gotta take it out, seat belt hits it, and on and on.
Of course I also sport a chl, and you can't pull off that much hardware on one side of your waist, let alone almost a full inch bigger. Maybe some of the bigger dudes can pull it off, but not me. Wished I could, because a bigger screen is always nice but, damn it has such huge drawbacks that make it non worthwhile.
ohredwood said:
I'm gonna say that has a lot to do with the size hands you got and what kind of case you sport, and finally what's your mode of transporting it.
If I was female, probably would think harder about getting the gs3, since I could just throw it in my purse. However, I tote a sack, so I don't have a purse to throw my phone in.
I've got probably normal to slightly smaller hands, another negative for a larger phone.
Lastly, I honestly don't know how you guys transport a phone that's bigger than a Dinc, unless you do NOT pack your phone in a case. When I first bought mine a couple years ago, I bought an otterbox, to protect the investment these phones cost. But it sucks ass trying to transport it. Phones are not what they use to be, and you clip something that is this big to your waist, I'm sorry, I think it looks stupid. Put it in your back pocket, ugh no.
So I ended up getting a case with a clip, and throw it in the front pocket and clip it to pocket seam. But this still is an effort, sitting down, you gotta take it out, seat belt hits it, and on and on.
Of course I also sport a chl, and you can't pull off that much hardware on one side of your waist, let alone almost a full inch bigger. Maybe some of the bigger dudes can pull it off, but not me. Wished I could, because a bigger screen is always nice but, damn it has such huge drawbacks that make it non worthwhile.
Click to expand...
Click to collapse
I pre-ordered the S3 to keep my unlimited, but was worried about carrying such a large phone. I figured if I didn't like it I would switch to the DINC 4G.
I wear Carhartt shorts and pants because they have a pocket on the leg that's perfect for cell phones. Not to mention they make awesome gear - wears like a champ.
I stopped in T-Mobile to see if the S3 fit in my leg pocket and it fits with ease - even with a slim case. So the DINC 4G would be no problem.
I hate carrying a phone in my front or back pockets, and the belt clip thing is a pain when sitting down - you're right. There are other brands of shorts/pants with the leg pocket also. It has made carrying around a smart phone no problem at all.
Hope this helps.
I don't use a case and I don't keep anything other than my phone in my pocket, so the SGSIII fits fine in there... I stopped into T-Mobile to try it out and it slid right in and out with ease. It wasn't particularly difficult to hold the SGSIII either. The buttons are in good positions and it doesn't require any crazy hand-contortions to get at them (although the power button is a little cheap-feeling). I don't suspect I'll have any issues holding or using the SGSIII.
But there's a difference between something being "not particularly difficult to hold" and being a joy to hold.
Pretty much every hands-on with the Incredible 4G has said that the dimensions, paired with the somewhat-thicker, rounded back, make it fit very nicely in hand. Not to mention, the soft, textured plastic helps too, for those of us who don't use a case.
Even though I can hold it OK, I feel like the size and shape of the SGSIII, compared to the Inc 4G, makes it much much much more susceptible to drops, which is another important thing to note... especially for people like me who don't use cases.
demarcmj said:
I don't use a case and I don't keep anything other than my phone in my pocket, so the SGSIII fits fine in there... I stopped into T-Mobile to try it out and it slid right in and out with ease. It wasn't particularly difficult to hold the SGSIII either. The buttons are in good positions and it doesn't require any crazy hand-contortions to get at them (although the power button is a little cheap-feeling). I don't suspect I'll have any issues holding or using the SGSIII.
But there's a difference between something being "not particularly difficult to hold" and being a joy to hold.
Pretty much every hands-on with the Incredible 4G has said that the dimensions, paired with the somewhat-thicker, rounded back, make it fit very nicely in hand. Not to mention, the soft, textured plastic helps too, for those of us who don't use a case.
Even though I can hold it OK, I feel like the size and shape of the SGSIII, compared to the Inc 4G, makes it much much much more susceptible to drops, which is another important thing to note... especially for people like me who don't use cases.
Click to expand...
Click to collapse
I actually enjoyed holding the S3. However the Incredible 2 when I held it, just feels perfect in your hands. I find the power button is a bit bother some to press on the top for anything larger than an iPhone so I'm actually glad Samsung put the S3's at the side because its more convienent. The button, however, is cheap feeling. I suspect the Incredible 4g will also feel great in hand, but the power button might be a little bothersome since its very tall.
Sent from my Ally using XDA
I've only got a Speck case on my HOX. It does not add too much to it. This phone needs a case IMO because it just slides out of my hands due to the surface. I usually just keep the phone in my pocket when I'm walking around.
Sent from my HTC One X using xda app-developers app
I think the screen size issue comes largely down to preference. I wouldn't anticipate that the SGS3 would have any trouble fitting in a pocket, since that has a lot more to do with depth than screen size (ah, the old days of putting a Motorola Droid in your front pocket and having everyone ask you "what the hell is that giant box in your pocket?"). But it's about your habits in using your phone. If you primarily hold your phone with one hand and use the touchscreen with your index finger on the other hand, you could easily use a 4.8" screen or even bigger without any comfort issues. But, 90% of the time, I'm holding my phone one-handed and accessing the entire screen with my thumb. Unless you have really, really long fingers, that's nearly impossible on any screen bigger than 4.3" without seriously stretching your hand.
To be entirely honest, if it weren't for my desire for a little extra screen real estate and the fact that 4" is pretty much the minimum in this generation of phones, I'd stick with a 3.7" screen. The Incredible is as good as it gets in comfort-in-hand. Everything feels like it's the perfect distance apart.

[REVIEW] Cheap-a$$ waterproof cases

I had an amazon gift card to use up, and we're planning a road trip to a waterpark so I decided to use the gift card to try and find a waterproof/water-resistant solution for my lte. I wasn't going swimming with these, but I did want to protect my phone from the the occasional dunk or splash, and I didn't trust a ziplock bag to do the job. I also didn't want to spend a lot (otherwise I would have gotten the overboard case).
I ended up ordering the following cases;
BestDealUSA Waterproof Underwater Pouch Dry Bag Pack Case Cover for Cell Phone PDA Blue - $2.96
Waterproof Case for Apple iPhone 4, 4S - Also Works with iPod Touch, iPhone 3G, 3GS, & Other Smartphones - IPX8 Certified to 100 Feet - $4.57
Universal Waterproof Bag Case for Cell Phone / PDA, Blue - $0.01
Universal Waterproof Bag Case for Cell Phone / PDA, Black - $1.92
BestDealUSA Waterproof Underwater Pouch Dry Bag Pack Case Cover for Cell Phone PDA Blue
The plastic material seems strong on this case, and the seal seems like it would do a good job to keep the moisture out. The evo slides in and out easily, even with a tpu case, although it does it need to go in upside down if you want to take pictures - otherwise the camera is blocked by the opaque section of plastic, but this is not a big deal. There is a raised seal around the window of clear plastic (which takes up about 4/5ths of the phone screen) that makes pulling the unlock ring a little difficult, but not impossible. This is the biggest of the cases, with the most space around the phone. Screen responsiveness through the plastic is good, and the the window is clear, so its easy to see the phone screen. Lanyard runs through the width of the case, and seems very strong - I don't see it snapping or anything.
Waterproof Case for Apple iPhone 4, 4S - Also Works with iPod Touch, iPhone 3G, 3GS, & Other Smartphones - IPX8 Certified to 100 Feet
This one looks very similar to the higher priced overboard case and has great reviews. The areas surrounding the clear windows are puffy, as if it would allow the case to float. Unlike the other cases (which use a combination of two ziplock-type closure zips), this one has a plastic mechanical mechanism to squeeze and hold the opening shut like a vise. I don't know if I would trust this case to remain underwater for any length of time. It doesn't seem to seal as well as I would like, although the reviews all rave about how watertight it is. Having said that, the phone fits in this case perfectly with the tpu case, and even better without a case (upside down again), without being too snug, and the clear windows are exactly the size of the phone screen - only the capacitive buttons are hidden. Screen responsiveness through the plastic is good, and the the window is clear, so its easy to see the phone screen. The puffy areas around the clear screen also do a really good job of holding the phone in place, but makes it a bit difficult to press the power button. The lanyard that this case with end in what appears to be a thread that you loop through an opening in the case and seems like a good tug would snap it off.
Universal Waterproof Bag Case for Cell Phone / PDA, Black/Blue
I was only going to get the black one, but when I saw the blue one for a penny, I decided why not. These are identical cases, but one is black, and one is blue. These are the snuggest cases, and its a challenge to get the phone in, even without the tpu case. The plastic material the cases are made of is very tacky on the inside, so the phone tends to get stuck when you put it in or take it out. The plastic also seems thinner on these than the other cases, and the seals around the edge don't seem very reliable. Once the phone is in though, it's the most compact and pocketable of all of the cases. These cases do not have a clear window on both sides, so if you want to use the camera, then the phone screen will be covered by the translucent side of the case. It's not too bad, and the screen is still visible, but in bright situations, this could be an issue. Having said that, screen responsiveness is very good with these cases, most likely due to the thinness of the plastic. Lanyard goes through hole in the case and seems strong enough. These also come with an arm band that may fit you if you have the arms of a small child. They're really, really small.
Final thoughts - All of these would probably do a good job to keep water and moisture off of the phone (or even sand if you're going to the beach), and I think any of them would be fine to protect against accidental splashing. If I was going diving or swimming with my phone, I would probably shell out the extra cash for the overboard, or at least do some serious waterproof testing on these first. As it stands, I think I'll end up using the first case - Not too crazy about the blue, but I think it will do the best job of keeping the phone dry, and I won't need to worry about going down the log flume with it in my pocket or around my neck (like a tourist, lol).
Hey man, thanks for the reviews. I didn't even know you could get waterproof cases/bags so cheap.
I'll have to pick one up now.
I do suggest you update the prices in your post to include the shipping though for a better cost comparison (even though the difference here is minimal). So many venders inflate the shipping to make up the difference for a $0.01 item.
p.s. I'm going to pick up the first one as well since it looks like I can easily have it in my pocket as a just in case. (I'm in Florida and we have crazy torrential thunderstorms out of no where, so if I'm out jogging, I can have it in my pocket just in case.
Though expensive, Lifeproof cases are really nice. Ive known many people to go out in the ocean and take pictures under water with them.
Just an update, I did end up using that first case, and although it never went underwater, it got splashed on alot. Phone stayed dry, it fit great in the bathing suit pocket, and even took some great pics through the case. Would definitely recommend.
Quick update from me too. I ended up ordering this case: http://www.amazon.com/gp/product/B0058NXWPY/ref=oh_details_o02_s00_i00
Used on a canoe trip. The canoe flipped and it went underwater for around a minute or so, and air dried after, did a great job. Would recommend this one!
i am using the first case, blue, as well. Works fine, keeps my phone dry in a 10ft deep pool. Takes picture fine too. Thanks for the review OP.
I actually prefer these right here. They come in different sizes I prefer the 6-1/2 x 3-1/4I can't confirm they work in 100 ft of water because I have no reason to be that deep ever in my life, but for the average rainy day, screwing around by the pool or working out these work great. The best part is the patented purple zip technology that lets you visibly confirm the case is sealed. Also pics turn out great. Good luck in your decision
Asadullah said:
I actually prefer these right here. They come in different sizes I prefer the 6-1/2 x 3-1/4I can't confirm they work in 100 ft of water because I have no reason to be that deep ever in my life, but for the average rainy day, screwing around by the pool or working out these work great. The best part is the patented purple zip technology that lets you visibly confirm the case is sealed. Also pics turn out great. Good luck in your decision
Click to expand...
Click to collapse
Hahaha that had me laughing so much once I read the whole thing then clicked on the link. Good one!
Sent from my EVO using xda premium

Categories

Resources