Hi Huawei p20 lite my phone boatloader took the sheath and set up twrp recovery ane-x1 c432 on my phone twrp over c636 oemInfo I downloaded the phone recovery mode was opened burlu the update error gave me the initialization of the factory folder in the recovery folder was not always open in the memory folder d I installed the 8.0.0.140 c432 version and it was opened but the compilation number was 8.0.0.46 (oxcb) then I installed the 8.0.0.140 c636 version dload method did not change what should I do
Related
Trying to update my device (GR5 KII L33) I downloaded an update.zip file, and added it to the dload folder, but this file did not correspond to my phone, so now it does not turn on and only directs me to the TWRP. I have not found the original software KII L33 and I can not get my phone to turn on, although I have repeatedly installed my backup the phone just go to the TWRP
Please, I would be very grateful if you could help me restore my phone, or share the original file so I can install it, since so far I have not found a solution
If you're wanting to flash stock then there's a guide here.
If you're wanting a custom rom then in TWRP just do a full wipe (factory reset + system) and flash the ROM zip file just like normal.
Don't flash official ROM update zips in TWRP.
Donot flash official emui updates from twrp, as it contains update.app files
Anybody can PLEASE share, need it or my phone is destroyed coz i accidentally destroyed my backup
EDIT:
FOUND OUT A SOLUTION
- FLASHED boot.img FROM B130 FIRMWARE
- STILL BOOTLOOPED
- FLASHED MAGISK 13.3 WHICH MODIFIES THE BOOT.IMG
- BOOT LOOP AGAIN
-AFTER 4 BOOTLOOPS HUAWAI RESCUE DOING FACTORY RESET
>>>Sucesful boot into ANDROID
-----------------------------
NOW ONLY STUCK BY ENTERING PIN ----> DOESN'T ACCEPT MY PIN
Hello, i've got a similar problem. after trying to flash emui 5.1 supersu.zip the phone bootlooped. after restroring with twrp backup the phone crashed after the "emui-registration/welcome" dialog. tried to flash b130 via twrp and dload method. do you have any ideas? maybe by flashing boot.img? and where can i find the b130 boot.img? Thx!
4r44444 said:
Anybody can PLEASE share, need it or my phone is destroyed coz i accidentally destroyed my backup
EDIT:
FOUND OUT A SOLUTION
- FLASHED boot.img FROM B130 FIRMWARE
- STILL BOOTLOOPED
- FLASHED MAGISK 13.3 WHICH MODIFIES THE BOOT.IMG
- BOOT LOOP AGAIN
-AFTER 4 BOOTLOOPS HUAWAI RESCUE DOING FACTORY RESET
>>>Sucesful boot into ANDROID
-----------------------------
NOW ONLY STUCK BY ENTERING PIN ----> DOESN'T ACCEPT MY PIN
Click to expand...
Click to collapse
I extracted it with Huawei Update Extractor from UPDATE.APP provided in this thread "https://forum.xda-developers.com/honor-9/how-to/firmware-honor-9-stf-l09c432-b130-2017-t3649673" (you must extract update.app from firmware and than use huawei update extractor windows app to extract the extracted UPDATE.APP - I only extracted the boot image... phone booted succesful, had to do another hard reset via TWRP coz it didn't accept my (right!) PIN... now works... only fingerprint scanner and navbar buttons does not work... now I only need the BOOT.IMG from my old firmware (B100) and flash via bootloader... I think this will fix the problem....
I do not guarantee this things to work maybe crushing your device even more do it only if you risky
i managed to finally unbrick my mate 10 lite ( RNE-L21C432 ) i downloaded latest android version and then i extracted update.zip and then update.app
after that i extracted update_full_RNE-L21_hw_eu.zip and then update.app
first i flashed userdata.img then i was able to flash recovery (wasn't able before)
and boom phone is no more stuck in fastboot mode (blackscreen) :victory:
Desperate help needed to go back to stock (Mate 10 Pro EMUI 8 TWRP & MAGISK) BLA-L09
Hello there. I'm used to Samsung devices and the more I read about Huawei devices the more lost I feel about them.
So, my Mate 10 pro BLA-L09 is currently running Build Number 8.0.0.131(C782). It is rooted with Pretoriano's TWRP and Magisk (Using the All-In-One tool). Of course, I can't get any pending update installed. I would like to receive that EMUI 9 update. I've read people have been successful using HuRupdater and some others ended up with a hard bricked device. Some other people suggest the safest option is to uninstall Magisk, flash stock recovery and let the phone update itself.
So far, I've downloaded the same full 8.0.0.131(C782) firmware I'm on from Firmware Finder and downloaded Huawei Update extractor to extract the recovery from UPDATE.APP. However, instead of having one recovery file to extract, there are 3 Recoveries (named: RECOVERY_RAMDIS, RECOVERY_VBMETA, RECOVERY_VENDOR) and another 4 E-Recoveries.
Can anyone please give me some step by step guidance on what to do? I'll Paypal you a beer if I'm successful with the help.
Cheers!
May be you can simply dload the firmware and then it should be full stock if dload works. Dload guide is given in my signature
shashank1320 said:
May be you can simply dload the firmware and then it should be full stock if dload works. Dload guide is given in my signature
Click to expand...
Click to collapse
Thanks! But I think dload won't work with custom recovery, right? I'm on TWRP. And getting stock recovery is just what I'm trying to achieve.
93starletgt said:
Thanks! But I think dload won't work with custom recovery, right? I'm on TWRP. And getting stock recovery is just what I'm trying to achieve.
Click to expand...
Click to collapse
Dload replaces your twrp and custom boot both. It will bring back your phone to full stock. Else you could extract the images from your firmware and then flash. Let me give you the commands.
Thanks! I just fixed my issue by flashing this through TWRP: it Installs the Oreo stock recovery.
The procedure was:
-Booted into TWRP
-Uninstalled Magisk (by flashing Magisk Uninstall Zip)
-Flashed the stock recovery (from the link below) through TWRP
-Reboot
-Check for system updates, phone will install them with no problems
Phone will be unrooted and will have stock recovery. Don't know if this will work for every stock build, it worked with mine 8.0.0.131(C782).
Link:
https://mega.nz/#!8Swx3QaC!3JQ9imU70E9O1BxgO53Z754lGCZxCbKGgSHqvTEcXsQ
I was getting the command ready for you. Glad you fixed it yourself
[*]Run the command to boot to fastboot
Code:
adb reboot bootloader
[*]On fastboot screen, you will have bootloader state as Unlocked and FRP Unlocked.
[*]Flash the stock Recovery Ramdisk as
Code:
fastboot flash recovery_ramdisk <Recovery_File_Name>.img
[*]If you have installed magisk, flash the stock boot ramdisk.img as
Code:
fastboot flash ramdisk <ramdisk_File_Name>
I've spent a lot of time to get root my Honor V10. I guess this guide would be usefull for other Huawei devices.
First of all you need to fix the bootloader. I used HCU-client to read de bootloader code and after that I was able to unlock de bootloader via fastboot command:
Huawei bootloader code read via testpoint – HCU Client
hcu-client.com
Secondly I downloaded an online firmware of Android 9.0. Android 10.0 doesn't work for this purpose.
Huawei Honor 10 COL-L29 hw eu HLRCF Columbia-L29D 9.1.0.353(C432E5R1P13T8) Firmware 9.0.0 r3 EMUI9.1.0 05015CPS [androidhost.ru].zip - AndroidHost.RU
Download file - Huawei Honor 10 COL-L29 hw eu HLRCF Columbia-L29D 9.1.0.353(C432E5R1P13T8) Firmware 9.0.0 r3 EMUI9.1.0 05015CPS [androidhost.ru].zip
androidhost.ru
This firmware is needed for either install on the device and for generate the RECOVERY_RAMDIS.img
To generate the RECOVERY_RAMDIS you will need this application: HuaweiUpdateExtractor_0.9.9.5
To install the firmware on the device a SD card or a usb via OTG is requiered.
Finally, you must install Magisk and patch de RECOVERY_RAMDIS.img using Magisk. After that You should connect the device via USB to the computer and exec next instruction on fastboot:
.\fastboot.exe flash recovery_ramdisk .\RECOVERY_RAMDIS_PATCHED.img