Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Amajed said:
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Click to expand...
Click to collapse
You should try the DLOAD method, but you must know the cust (c432, c636, etc.) too, not only the model (in your case BLA-L29).
Pretoriano80 said:
You should try the DLOAD method, but you must know the cust (c432, c636, etc.) too, not only the model (in your case BLA-L29).
Click to expand...
Click to collapse
Is there a way to know that? the phone isn't working :/
Thanks
Amajed said:
Is there a way to know that? the phone isn't working :/
Thanks
Click to expand...
Click to collapse
Try with this fastboot command : fastboot oem get-build-number
Or check on the box. You could also try checking with IMEI/SN on Huawei's website.
Pretoriano80 said:
Try with this fastboot command : fastboot oem get-build-number
Or check on the box. You could also try checking with IMEI/SN on Huawei's website.
Click to expand...
Click to collapse
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
EDIT:
I checked mine, it says BLA-L29 8.0.0.129(C185)
using fastboot oem get-build-number
Amajed said:
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
Click to expand...
Click to collapse
You can use an OTG cable with an USB stick, Memory Card reader, etc.
Pretoriano80 said:
You can use an OTG cable with an USB stick, Memory Card reader, etc.
Click to expand...
Click to collapse
Good, I'm downloading BLA-L29 8.0.0.129(C185) update.zip file, I'll extract it and copy the UPDATE.APP file to a folder named dload in the root of a memory stick, plug it in a USB Type C to USB Type A
then turning on the phone by pressing volume up + volume down + power button until Huawei logo appears.
and that's it, hopefully everything goes well.
Thanks
Amajed said:
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
EDIT:
I checked mine, it says BLA-L29 8.0.0.129(C185)
using fastboot oem get-build-number
Click to expand...
Click to collapse
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Amajed said:
Good, I'm downloading BLA-L29 8.0.0.129(C185) update.zip file, I'll extract it and copy the UPDATE.APP file to a folder named dload in the root of a memory stick, plug it in a USB Type C to USB Type A
then turning on the phone by pressing volume up + volume down + power button until Huawei logo appears.
and that's it, hopefully everything goes well.
Thanks
Click to expand...
Click to collapse
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Amajed said:
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Click to expand...
Click to collapse
Hi, it almost happened to me, I made him rebrand in his time and now I was going to update it and I was brickened I tried to put the cust and I deleted the IMEI and now it appears as Huawei p20 pro mate 10, In other words, it has two firmwares and I tried everything, I put the update I put other cust and nothing when it starts because it restarts, and the dead is no way to revive it [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Pretoriano80 said:
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Click to expand...
Click to collapse
Thanks, I'm downloading yours as we speak,
I've downloaded this one:
http://huawei-update.com/firmware/6343/huawei-mate-10-pro/bla-l29
but after I tried the combination, I got massage says "Software Install failed"
is it because of my copy? or was it something else?
Pretoriano80 said:
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Click to expand...
Click to collapse
I just downloaded your file, I dragged and dropped the dload folder into a formatted USB stick (exFAT) but still, gives me the following error: (Software Install Failed)
maybe worth mentioning, I did (a year ago) install TWRP then I uninstalled it, does this have to do with anything?
Amajed said:
I just downloaded your file, I dragged and dropped the dload folder into a formatted USB stick (exFAT) but still, gives me the following error: (Software Install Failed)
maybe worth mentioning, I did (a year ago) install TWRP then I uninstalled it, does this have to do with anything?
Click to expand...
Click to collapse
Probably you have a "hibrid" firmware, what version did you tried to flash with fastboot?
Pretoriano80 said:
Probably you have a "hibrid" firmware, what version did you tried to flash with fastboot?
Click to expand...
Click to collapse
You mean a year ago? I don't really remember, but if you mean now, I tried this post:
https://forum.xda-developers.com/showpost.php?p=76060051&postcount=10
it doesn't say which version
and for some reason my phone is unrecognized when I enter Fastboot. I tried multiple drivers, but I always end up with usb not recognized by windows
Amajed said:
You mean a year ago? I don't really remember, but if you mean now, I tried this post:
https://forum.xda-developers.com/showpost.php?p=76060051&postcount=10
it doesn't say which version
Click to expand...
Click to collapse
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Click to expand...
Click to collapse
Will do that as soon as I figure out why my phone is not recognized by windows, it was working before, now no matter what drivers I install, it keep saying my USB in not recognized .....
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Click to expand...
Click to collapse
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
You are hijacking this thread, please open a new thread for your problem exactly, so we can avoid confusion.
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Click to expand...
Click to collapse
I have two problems now :/
Extracting system.img takes for ever, as I'm writing now, it's still extracting, even tho the bar is full.
the second problem is, I couldn't find "recovery_ramdisk"
there is "RECOVERY_RAMDIS.img" and there is "RAMDISK.img"
which one is it?
Sergiocubano1 said:
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
So I flashed 4 files:
fastboot flash system SYSTEM.img
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
using the Live Linux you mentioned.
Now I'll go back to the dload and see if it works
Amajed said:
So I flashed 4 files:
system.img
ramdisk.img
kernel.img
recovery_ramdis.img
using the Live Linux you mentioned.
Now I'll go back to the dload and see if it works
Click to expand...
Click to collapse
Yes, i forgot that emui8 has the ramdisk too, so flash that too.
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
Related
Hi,(I am spanish sorry about my english)
after a long time searching how to rollback finally I have found the way thanking to this thread https://forum.xda-developers.com/p10/how-to/success-downgrade-oreo-to-nougat-t3729659.
In the thread the way to rollback isn't very extended explained so i decided to create mine and explain easy.
My phone is a Huawei P10 L29c432B.... .
Steps:
1- Download HWOTA8 from--https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
2-Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
3-Delete the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Hi!
Thx for this guid, it seems to be clearly and good to understand! I have only one problem: i can not find the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8 for changing... ???
I tried with notepad++, but i can not do this... How did you get this step working?
Thx a lot!
stefan.irmen said:
Hi!
Thx for this guid, it seems to be clearly and good to understand! I have only one problem: i can not find the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8 for changing...
I tried with notepad++, but i can not do this... How did you get this step working?
Thx a lot!
Click to expand...
Click to collapse
You have to unzip the hwota8_update.zip file into another location, edit the extracted update_binary file and then repack the zip. The update_binary file in HWOTA8_<date>.zip is a binary file and shouldn't be edited with a text editor.
txonan said:
Hi,(I am spanish sorry about my english)
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Click to expand...
Click to collapse
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
pale1505 said:
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
Click to expand...
Click to collapse
First few times i had the same problem...
When the phone is off an you will hold "Power" and "Volume+" button to boot into TWRP, just hold "Volume+" after phone is vibrating... Then you will boot into TWRP...
stefan.irmen said:
First few times i had the same problem...
When the phone is off an you will hold "Power" and "Volume+" button to boot into TWRP, just hold "Volume+" after phone is vibrating... Then you will boot into TWRP...
Click to expand...
Click to collapse
You have to reinstall twrp and then continue with the steps.
pale1505 said:
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
Click to expand...
Click to collapse
The fact is that the recovery proccess is a **** in this model. Try to power completely off the phone and the Pess POWER + VOL+ when you feel the phone vibrates retire the press of power button and still pressing VOL+ button by this way sometime it goes ok. If TWRP load go ahead with the followings steps.
Other way it to reinstall again TWRP untill it loads.
Let me know if you suceed, good luck.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
2. Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
non-functional link?
How exactly is it to be?
txonan said:
The fact is that the recovery proccess is a **** in this model. Try to power completely off the phone and the Pess POWER + VOL+ when you feel the phone vibrates retire the press of power button and still pressing VOL+ button by this way sometime it goes ok. If TWRP load go ahead with the followings steps.
Other way it to reinstall again TWRP untill it loads.
Let me know if you suceed, good luck.
Click to expand...
Click to collapse
just to let you know that nothing worked,
went to a shop, they tried everything, uploaded older firmwares, but after that the phone died, only black screen, couldn't even switch it on.
warranty did the trick
the guys replaced the mainboard, nothing else helped
so i'm waiting now for the official update
Good day! Can I use this method for installing Official Oreo from Beta? What I would like to do, is skip the deleting of row then just flash the twrp and continue with installation process.
I'm on VTR-L29C636B361.
I would like to rollback to Nougat, for root reasons. I'm trying to follow this method, but I'm not able to find the right files. All I succeded to find is the "update.zip", from Firmware Finder website, but no signs regarding others mentioned ("update_all_hw.zip"). Where can I dowload the right files?
Moreover: I flashed TWRP 3.2.1. I would like to go back on stock recovery, but again I'm facing a lot of problems. I would like to extract from update.app I have (from "update.zip" above mentioned), but HuaweiUpdateExtractor gives me a lot of error. Any help?
Thanks!
pdbc said:
I'm on VTR-L29C636B361.
I would like to rollback to Nougat, for root reasons. I'm trying to follow this method, but I'm not able to find the right files. All I succeded to find is the "update.zip", from Firmware Finder website, but no signs regarding others mentioned ("update_all_hw.zip"). Where can I dowload the right files?
Moreover: I flashed TWRP 3.2.1. I would like to go back on stock recovery, but again I'm facing a lot of problems. I would like to extract from update.app I have (from "update.zip" above mentioned), but HuaweiUpdateExtractor gives me a lot of error. Any help?
Thanks!
Click to expand...
Click to collapse
At the HWFF website the link leads you to you need to click the "filelist" (not only the "update"), that will give you links to all the files needed.
For the rest I am not sure, would also like to get back to the stock recovery but so far found no way to do so...
_Nostromo_ said:
At the HWFF website the link leads you to you need to click the "filelist" (not only the "update"), that will give you links to all the files needed.
For the rest I am not sure, would also like to get back to the stock recovery but so far found no way to do so...
Click to expand...
Click to collapse
I can give you recovery.img and recovery2.img for VTR-L29C636B162. I flashed this and then roll back to Nougat (B172) with FF.
pdbc said:
I can give you recovery.img and recovery2.img for VTR-L29C636B162. I flashed this and then roll back to Nougat (B172) with FF.
Click to expand...
Click to collapse
Thanks a lot for your offer, however unfortunately my model is VTR-L09 so I better do not mess it even more...
how do i edit update-binary? Just odd things comes up with notepad++
Question
txonan said:
Hi,(I am spanish sorry about my english)
after a long time searching how to rollback finally I have found the way thanking to this thread https://forum.xda-developers.com/p10/how-to/success-downgrade-oreo-to-nougat-t3729659.
In the thread the way to rollback isn't very extended explained so i decided to create mine and explain easy.
My phone is a Huawei P10 L29c432B.... .
Steps:
1- Download HWOTA8 from--https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
2-Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
3-Delete the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Click to expand...
Click to collapse
Hi, I have one question
Your phone was VTR-L29 C432 and you used the firmware of VTR-L29 C900, so can I use the C900 in any version to rollback and after that, what would be my version? C432 or C900?
I'm asking because for some reason I have VTR-L09 8.0.0.046(04VT) and I want to rollback, then rebrand and finally upgrade to VTR-L29 C432 with a custom kernel.
Thanks a lot!
This guide realy work ??
hello, I test by cons I have a problem, once flash hwota8_update.zip, it tries to restart in recovery and redémre on oreo, a solution?
Hello, I have a problem in the rocovery that I flash wota8_update.zip I have E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip file '/external_sd/HWOTA8/update.zip
Maybe this is a silly question. Do we need to change the recovery file since MHA is a code name for MATE 9. P10 use VTR. Is it still usable?
So after a while of tinkering with my Honor 9 trying to flash Supersu via TWRP everything got messed up.
Tried doing a clean install, and that made everything worse.
So now i am stuck with no TWRP Recovery and cannot load the Fastboot. Only option available now is Huawei eRecovery through wifi that obviously doesnt work, and forced recovery (vol+ and vol- and powerbutton) which is also not working trying to flash with stockrom.
So what can i do now? am i missing something?
Inisio said:
So after a while of tinkering with my Honor 9 trying to flash Supersu via TWRP everything got messed up.
Tried doing a clean install, and that made everything worse.
So now i am stuck with no TWRP Recovery and cannot load the Fastboot. Only option available now is Huawei eRecovery through wifi that obviously doesnt work, and forced recovery (vol+ and vol- and powerbutton) which is also not working trying to flash with stockrom.
So what can i do now? am i missing something?
Click to expand...
Click to collapse
Do you have your PC connected via USB to your phone when trying to boot to fastboot?
completely power off phone, then hold vol-down and plug in USB cable... this should boot you into fastboot, try and flash TWRP from there, although, if you dont have the required files on your device (or any way to get them onto it) you are not in a good situation.
something similar happened to me the other day, and this got me into fastboot where i could flash a system.img (or use HWOTA or whatever it is), though i had TWRP installed, but no OS.
fregor said:
Do you have your PC connected via USB to your phone when trying to boot to fastboot?
Click to expand...
Click to collapse
Yeah, did that now and it worked. Although my previous attempts doing this nothing happened. But i am in the fastboot now atleast, bad news is that my device doesnt come up when using the apb devices command.
Any tips on what to do now? i suppose my device isnt showing because i cant use debug mode?
Inisio said:
Yeah, did that now and it worked. Although my previous attempts doing this nothing happened. But i am in the fastboot now atleast, bad news is that my device doesnt come up when using the apb devices command.
Any tips on what to do now? i suppose my device isnt showing because i cant use debug mode?
Click to expand...
Click to collapse
There's a lot of options on this forum if you have fastboot access and TWRP. So you should be able to get back to where you were before tinkering.
I recommend an external SD card reader to get necessary files on a SD card.
fregor said:
There's a lot of options on this forum if you have fastboot access and TWRP. So you should be able to get back to where you were before tinkering.
I recommend an external SD card reader to get necessary files on a SD card.
Click to expand...
Click to collapse
Yeah, i have been looking around on the forum alot, but almost every thread with a similiar problem they still have access to TWRP, which i dont sadly :/.
Inisio said:
Yeah, i have been looking around on the forum alot, but almost every thread with a similiar problem they still have access to TWRP, which i dont sadly :/.
Click to expand...
Click to collapse
You should be able to flash it in fastboot though. If your fastboot is locked and frp is locked, you have a problem.
Not sure if recovery in Hisuite might be an option.
Sent from my STF-L09 using Tapatalk
fregor said:
You should be able to flash it in fastboot though. If your fastboot is locked and frp is locked, you have a problem.
Sent from my STF-L09 using Tapatalk
Click to expand...
Click to collapse
yeah, i'm gonna see if i can come up with a way to flash it. Even though i cant find it using ADB anymore, there might some other way.
do you think it's possible doing this using the eRecovery Forced update?
Try this with a sdcard:
https://forum.xda-developers.com/showthread.php?t=3696892
oslo83 said:
Try this with a sdcard:
https://forum.xda-developers.com/showthread.php?t=3696892
Click to expand...
Click to collapse
So another problem, cant move bigger files than 4gb to the SD card. And cant format in NTFS because it seems like the phone wont take it.
but using a tempfile from a failed transfer the install at least starts, and ofcourse fails after a while since its incomplete. But how can i transfer the UPDATE.APP file to the card?
Inisio said:
So another problem, cant move bigger files than 4gb to the SD card. And cant format in NTFS because it seems like the phone wont take it.
but using a tempfile from a failed transfer the install at least starts, and ofcourse fails after a while since its incomplete. But how can i transfer the UPDATE.APP file to the card?
Click to expand...
Click to collapse
Format to exfat
Sent from my STF-L09 using Tapatalk
fregor said:
Format to exfat
Sent from my STF-L09 using Tapatalk
Click to expand...
Click to collapse
That did it, never thought of exfat! New firmware installed, thanks alot for the help!
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Koa1 said:
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Click to expand...
Click to collapse
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I'm understanding the next step...the download of all 3 files (update.zip and the others files) of a one file and extract it
Because Firmware Finder gives me 3 zip files and i not understand wich of 3 decompress the update.app
Sorry for my english...again...
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Koa1 said:
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Click to expand...
Click to collapse
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I install in order specified and finally wipe with erecovery, is this correct?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
And the last question...
What is the diference of a Online Firmware and a Offline Firmware?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
Nothing, i resolved it, thanks very much!
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I tried to install it, it stucks at 5% and error message, what i do? Please help...
(Huawei MATE 10 ALP-L09) Hello, I tell you my situation, I am in the emui 8 version with cust 432 in the 150 sp1 version (xloader 1).
I want to try emui 9 so I'm going to switch to xloader 2.
I have the bootloader open and I'll leave it like this to update manually.
I'm going to use the HWOTA system, but when downloading the files of the latest version of emui 9 (version 159) I realize that 3 * .zip files are no longer the same as before, now only 2 files form it. The steps are the same? I put those two files in the Repack folder and then I go to the Ota folder and run the ota.bat ??
And another thing, should we rename those two files as was done before?
Thank you. A greeting.
Koa1 said:
I tried to install it, it stucks at 5% and error message, what i do? Please help...
Click to expand...
Click to collapse
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
artifexor said:
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
Click to expand...
Click to collapse
From dload folder you can flash Service ROM only,
you can download the S. ROM here:
https://androidhost.ru/search.html
Follow the instructions in "ReleaseDoc" . GL!
Warning: this process will erase all the data from your device!!!
bozka1 said:
https://androidhost.ru/search.html
Click to expand...
Click to collapse
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
artifexor said:
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
Click to expand...
Click to collapse
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Koa1 said:
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Click to expand...
Click to collapse
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
bozka1 said:
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
Click to expand...
Click to collapse
Thanks! But, do you have the one for Android 7.0?
Koa1 said:
Thanks! But, do you have the one for Android 7.0?
Click to expand...
Click to collapse
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
bozka1 said:
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
Click to expand...
Click to collapse
Because Android 8 in this phone works bad and slow
Koa1 said:
Because Android 8 in this phone works bad and slow
Click to expand...
Click to collapse
Okay, but if You now running A8 , You can downgrade to A7 using HiSuite (Update > Other version) , or, if You have TWRP on board, You can downgrade flashing A7 firmware via HuRupdater 0.4 . It's strongly not recommended downgrade via dload method, it may brick Your phone.
HELP...
So I tried to install a new OS Lineage and it everything just went wrong...LOL
I'm stuck in a bootloop and new OS didnt install correctly
But I know there is still some hope... I can boot into TWRP 3.2.1.0 and fastboot and have adb connection.
Just need a little guidance and what my options are from this point.
Huawei Mate 10 Pro BLA-A09C567B127
ha !! os lineage exists for mate 10 pro ? link please
AgentNerull said:
HELP...
So I tried to install a new OS Lineage and it everything just went wrong...LOL
I'm stuck in a bootloop and new OS didnt install correctly
But I know there is still some hope... I can boot into TWRP 3.2.1.0 and fastboot and have adb connection.
Just need a little guidance and what my options are from this point.
Huawei Mate 10 Pro BLA-A09C567B127
Click to expand...
Click to collapse
Download BLA-A09C567B127 firmware and extract UPDATE.APP file from it.
Use Huawei Firmware Extractor (get it from XDA) to open the UPDATE.APP file and extract the system.img and recovery_ramdis.img
Boot your device in fastboot and flash the two images with the following commands :
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash system system.img
Reboot to recovery and do a factory reset. Done!
ericcostes said:
ha !! os lineage exists for mate 10 pro ? link please
Click to expand...
Click to collapse
https://www.xda-developers.com/lineageos-honor-view-10-huawei-mate-10-pro-project-treble/
Pretoriano80 said:
Download BLA-A09C567B127 firmware and extract UPDATE.APP file from it.
Use Huawei Firmware Extractor (get it from XDA) to open the UPDATE.APP file and extract the system.img and recovery_ramdis.img
Boot your device in fastboot and flash the two images with the following commands :
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash system system.img
Reboot to recovery and do a factory reset. Done!
Click to expand...
Click to collapse
THANKS Pretoriano80
flashed both files and factory reset in recovery
but after about 10%, I get a big red Exclamation
any ideas?
Used this firmware. Maybe thats the error
https://forum.xda-developers.com/mate-10/how-to/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
AgentNerull said:
THANKS Pretoriano80
flashed both files and factory reset in recovery
but after about 10%, I get a big red Exclamation
any ideas?
Used this firmware. Maybe thats the error
https://forum.xda-developers.com/mate-10/how-to/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
Click to expand...
Click to collapse
i would use the files from the firmware you were on, in your case it should be B127
That B127 version does not seem as a valid one.At least not on EMUI 9,maybe EMUI 8
P. S. In fastboot mode, use this command to check the current version : fastboot oem get-build-number
Pretoriano80 said:
i would use the files from the firmware you were on, in your case it should be B127
That B127 version does not seem as a valid one.At least not on EMUI 9,maybe EMUI 8
P. S. In fastboot mode, use this command to check the current version : fastboot oem get-build-number
Click to expand...
Click to collapse
BLA-A09 8.0.0.127(C567)
Well... thats what I was afraid of... I still haven't been able to find the original firmware. And the backup I had was years ago and can't seem to find those files.
So is my phone just a paper weight? LOL
not even funkyhuawei has those files
AgentNerull said:
BLA-A09 8.0.0.127(C567)
Well... thats what I was afraid of... I still haven't been able to find the original firmware. And the backup I had was years ago and can't seem to find those files.
So is my phone just a paper weight? LOL
not even funkyhuawei has those files
Click to expand...
Click to collapse
Let me check if i can get those files for you. Eventually hit me on Telegram, it's easier to chat.
Hi folks, I've had a Huawei P20 Lite lying around here for a while. It is a demo device.
I was able to successfully unlock the bootloader with using the Testpoint method.
Now I need help to change the country code from "demo" to "eu" and I also need the right firmware. Is there a free way to change the country code?
I hope you can help me with that ? Thanks in advance.
cvpcvp said:
Hi folks, I've had a Huawei P20 Lite lying around here for a while. It is a demo device.
I was able to successfully unlock the bootloader with using the Testpoint method.
Now I need help to change the country code from "demo" to "eu" and I also need the right firmware. Is there a free way to change the country code?
I hope you can help me with that ? Thanks in advance.
Click to expand...
Click to collapse
Hi, look here
If you are running EMUI 9.1, flash C432 oeminfo and use variant with HuRupdater https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538623
https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538725
Thanks in advance. Somehow I can no longer get into the / system or the smartphone can no longer boot. When running HuRupdater I also get an error message that / System cannot be mounted. It only boots TWRP
I was able to import the oeminfo beforehand. There weren't any problems.
cvpcvp said:
Thanks in advance. Somehow I can no longer get into the / system or the smartphone can no longer boot. When running HuRupdater I also get an error message that / System cannot be mounted. It only boots TWRP
I was able to import the oeminfo beforehand. There weren't any problems.
Click to expand...
Click to collapse
Can you write down exactly what you did?
What is your version of EMUI?
In fastboot mode run commands:
fastboot oem get-build-number
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
I guess I've stupidly used the wrong command line a number of times to get twrp to run.
fastboot flash system, boot or recovery twrp....
At least it worked with the country ID change ... if only a small consolation for the first
fastboot oem get-build-number
(bootloader) :ANE-LX1 8.0.0.112(C432)
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :ANE-LX1 8.0.0.112(C432)
cvpcvp said:
ANE-LX1 8.0.0.112(C432)
Click to expand...
Click to collapse
your firmware is incomplete, it must be 8.0.0.143, if I'm not mistaken. Try again Huru method & factory reset in Stock recovery (not in TWRP!).
Or, download Service ROM Link , unpack , there's dload folder in "Software" . Copy dload folder (without unpacking it) to the OTG flash, turn off the phone and press and hold both volume buttons + Power ( this method will lock the BL again).
Thanks for the files. But i get an
Softwaere install failed
Incompatibility with current version.
Please download the correct update package.
EDIT: cant find the firmware version: ANE-L01C185B112 / ANE-LX1 8.0.0.112(C432)
EDIT2: same fail with 8.0.0.178(C432)
cvpcvp said:
Softwaere install failed
Incompatibility with current version
Click to expand...
Click to collapse
Probably due to incomplete firmware .112 , ( it was stupidity on my part to suggest Service ROM in this case, sorry. Maybe I was too sleepy...).
1. Try again Hurupdater method, it should work (don't forget to press Volume down)
2. Reboot into eRecovery, if possible, and select Download latest version and recovery
cvpcvp said:
cant find the firmware version: ANE-L01C185B112
Click to expand...
Click to collapse
Flash only C432 regional variant!
-Alf- said:
Probably due to incomplete firmware .112 , ( it was stupidity on my part to suggest Service ROM in this case, sorry. Maybe I was too sleepy...).
1. Try again Hurupdater method, it should work (don't forget to press Volume down)
2. Reboot into eRecovery, if possible, and select Download latest version and recovery
Click to expand...
Click to collapse
Can you explain me, how i can Boot into twrp without Flash twrp in recovery ramdisk?
cvpcvp said:
without Flash twrp in recovery ramdisk?
Click to expand...
Click to collapse
And what stopping you from doing it?
-Alf- said:
And what stopping you from doing it?
Click to expand...
Click to collapse
Okay, idon't think that's relevant anymore anyway
I found the problem. It was the TWRP version. I took the latest one (twrp-3.5.2_9-0-anne.img) and it couldn't mount the /system partition. Now I took a version from this forum (twrp-3.2.1-0.img), which seems to be specially adapted for the Huawei devices. Unfortunately, it doesn't support OTG, but that wasn't a problem because I moved the files it to the internal memory.
Only with this twrp version could HuRUpdater.zip be executed correctly and all other files just like that. Here, too, I was first asked to press the vol-down button.
After the smartphone finally boots properly, I flash the firmware via dload to lock the bootloader again and do over the Recovery Wipe data / factory reset + cach partition.
Now I'm on version 8.0.0.046(0CXB). Unfortunately the device cannot find a new firmware version and nothing can be updated via HiSuit.
Can you tell me which step I have to take now to get the latest Android version for the device?
Thank you very much so far for your help
cvpcvp said:
Now I'm on version 8.0.0.046(0CXB)
Click to expand...
Click to collapse
Unfortunately, you have incomplete FW there again, I think you're doing something wrong. And until the correct FW is there, you won't be able to receive OTA update or update via dload.
If you have followed instructions to the letter , it must work.
Use this TWRP . ( I don't know why you used TWRP 3.5.2.9, in the guide there is a link to 3.2.1-pretoriano80.). 3.5.2.9 isn't fully compatible with our device.
Try this way out:
- Flash TWRP
- Wipe - format data
- Reboot back to TWRP
- Wipe - Advanced wipe - wipe Dalvik/ART, cache, data, system
- Go back and flash HuRu
Note: the installation of the first file (write radio image...) must take longer, 2-3 minutes, this is proof that the installation is proceeding properly.
Btw, have you tried update via eRecovery & Wi-Fi?
Did it exactly like that. And then the 9.1.0.370 (C432) from the same thread loaded (dload / ANE-L01_hw_eu).
Now i have the firmware: ANE-LGRP2-OVS 9.1.0.370 in the device information.
Unfortunately, there is no further update, but I also don't know whether the current one is already the most recent?
What I also notice is that Dual-Sim settings are available in the menus. The IMEI2 is only provided with 000000000000000. I know that my device "only" supports single SIM.
Can I fix that too? Then everything should be fine as far as possible
cvpcvp said:
ANE-LGRP2-OVS
Click to expand...
Click to collapse
Wrong again .
cvpcvp said:
What I also notice is that Dual-Sim settings are available in the menus. The IMEI2 is only provided with 000000000000000. I know that my device "only" supports single SIM.
Click to expand...
Click to collapse
Oh, it's all clear now
Because this oeminfo is for dual SIM. Oeminfo for single SIM can be found for example here:
https://forum.xda-developers.com/t/c432-single-sim-oeminfo.3873312/
Also update_all_hw.zip file is for ANE-L21, you need ANE-L01, unfortunately, I don't have files for single SIM.
cvpcvp said:
Can I fix that too?
Click to expand...
Click to collapse
Maybe...You have to downgrade to Oreo via HuRupdater using downloaded files, then install TWRP over eRecovery and install stock Recovery.
Download https://androidhost.ru/2zMw and create dload folder .
In TWRP install new oeminfo.img , then go back to the main TWRP's menu, select Reboot > Power off. Use three buttons kombo to flash service ROM.
To be honest, I've never tried a variation like this, so I'm not responsible for this procedure, but it should work. The question is, is it worth it ...
-Alf- said:
Wrong again .
Click to expand...
Click to collapse
Which step is missing now exactly? I followed the steps from you. I also used the files from the other thread that you linked. The single-sim / dual-sim problem is not important either. The main thing is that it works that way too
cvpcvp said:
The single-sim / dual-sim problem is not important either.
Click to expand...
Click to collapse
Are you sure? In my opinion, this is your main problem...
Hello, it's been a while. I sat down again and went through everything. The dual SIM files fold onto a single SIM smartphone. I was finally able to install the update via eRecovery after flashing via TWRP. Then two updates were pulled or installed via Android OS. Now I'm on 9.1.0.132 (C432E5R1P7).