Related
So I unlocked bootloader and FRP. Installed magis. It was working, but when i tried to install xposed, it went into a bootloop. Now I'm stuck at eRecovery screen with nothing working. I've done factory reset 10-15 times. Clicking 'Download latest version and recovery' is also not giving anything. Can go to fastboot mode. Went there, saw FRP was locked. Thinking I'll redo the process, I relocked the bootloader. But now the commands aren't working as neither 'allow oem unlock' nor 'usb debugging' is enabled. I can't enable them as phone won't boot up. Any solutions? Please help.
Model ANE-AL00
Arseon said:
So I unlocked bootloader and FRP. Installed magis. It was working, but when i tried to install xposed, it went into a bootloop. Now I'm stuck at eRecovery screen with nothing working. I've done factory reset 10-15 times. Clicking 'Download latest version and recovery' is also not giving anything. Can go to fastboot mode. Went there, saw FRP was locked. Thinking I'll redo the process, I relocked the bootloader. But now the commands aren't working as neither 'allow oem unlock' nor 'usb debugging' is enabled. I can't enable them as phone won't boot up. Any solutions? Please help.
Model ANE-AL00
Click to expand...
Click to collapse
Go to TWRP and restore your system backup.
kilroystyx said:
Go to TWRP and restore your system backup.
Click to expand...
Click to collapse
But I didn't install a custom recovery. So no TWRP
Arseon said:
But I didn't install a custom recovery. So no TWRP
Click to expand...
Click to collapse
So, then try flash same system partition via fastboot.
I tried flashing original firmware using DC-Pheonix. But phone is still in bootloop
What your build ?
If this phone with OREO or with NOUGAT / Android 8.x or 7.x ?
Possibly didn't work because the rom was of a different built. I've an ANE-AL00 8.0.0.131. Any solutions for this fix? Thanks.
Arseon said:
Possibly didn't work because the rom was of a different built. I've an ANE-AL00 8.0.0.131. Any solutions for this fix? Thanks.
Click to expand...
Click to collapse
You should try at least flash the system from fullota, the firrmware can be found with Firmware Finder for Huawei
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C00B131&firmware_page=0
kilroystyx said:
You should try at least flash the system from fullota, the firrmware can be found with Firmware Finder for Huawei
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C00B131&firmware_page=0
Click to expand...
Click to collapse
Yes. I flashed same file only. But not booting up. In DC, it says file writing complete when in fastboot mode. But in upgrade mode, it fails at 5/31 PACKAGE_TYPE.
I'm using update.app from update.zip. Is that what I should be using? Should I use the other zip files(cn, public etc.)? Please help.
Arseon said:
Yes. I flashed same file only. But not booting up. In DC, it says file writing complete when in fastboot mode. But in upgrade mode, it fails at 5/31 PACKAGE_TYPE.
I'm using update.app from update.zip. Is that what I should be using? Should I use the other zip files(cn, public etc.)? Please help.
Click to expand...
Click to collapse
It seems like you are doing well, but have you read the instructions carefully? They recommend when something fail.
https://www.dc-unlocker.com/huawei-phone-flashing-in-fastboot
@Arseon
you write "ANE-AL00 8.0.0.131" - this is not the "full" build : what's your Cxxx ?
on FirmwareFinder i see (example)ANE-AL00C00B133 ( C00 = Country '00'; B133 = Build Counter )
you need the correctly build from your phone !!!
you can boot to bootloader ?
your bootloader is unlockt ?
your FRP is unlock ?
you have download your build FULL-Update ?
you have with UpdateExtractor from Update.app (inside Update.zip)
- ramdisk.img
- recovery_ramdisk.img
- system.img
extracted ? The Extractor do automatic for all *.img a *.img.header.
you have copy this 6 files to your ADB-Folder ?
If this all "YES" then boot to bootloader and
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
reboot phone, phone start to eRecovery and Low-Level format "data" and boot to system.
phone start as "new" phone (initial settings)
good : phone work
no good : all data is lost
AND very important : do not relock the bootloader !
ONLY if bootloader 'unlockt' you can self-repair !
JamesBott said:
@Arseon
you write "ANE-AL00 8.0.0.131" - this is not the "full" build : what's your Cxxx ?
on FirmwareFinder i see (example)ANE-AL00C00B133 ( C00 = Country '00'; B133 = Build Counter )
you need the correctly build from your phone !!!
Click to expand...
Click to collapse
Mine is ANE-AL00 8.0.0.131(C675). I used ANE-AL00C00B131 (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2370/g1789/v138744/f1/full/filelist.xml ) to flash
JamesBott said:
you can boot to bootloader ?
your bootloader is unlockt ?
your FRP is unlock ?
Click to expand...
Click to collapse
Sadly no. Both bootloader and frp are locked.
JamesBott said:
you have download your build FULL-Update ?
you have with UpdateExtractor from Update.app (inside Update.zip)
- ramdisk.img
- recovery_ramdisk.img
- system.img
extracted ? The Extractor do automatic for all *.img a *.img.header.
you have copy this 6 files to your ADB-Folder ?
If this all "YES" then boot to bootloader and
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
reboot phone, phone start to eRecovery and Low-Level format "data" and boot to system.
phone start as "new" phone (initial settings)
good : phone work
no good : all data is lost
Click to expand...
Click to collapse
Since bootloader and frp locked, adb commands are not working. Hence I'm using DCPheonix to flash the file. But without luck. It's still botting to eRecovery only
your phone is C675, you flash C00 : no correct
now is inside your phone a 'mix'
i think, you can no self-repair - sorry
@Arseon, my opinion your system partition is a mess due to xposed installation fail.
The solution for this case is restore system partition, it worked for me in the past.
In some cases we can get lucky install a clean system partition even if it is from other region code, because the main differences between regions are located in the other partitions
But what I learning is that system from C00 region don’t follow this standard because at least is missing google apps.
With DCPheonix did with get lucky and flash all files or just the first 4 and stop in the PACKAGE_TYPE?
same situation
I am in the same situation, can only boot to erecovery. I tried boot fastboot flash 4 files (because i have bootloader and frp unlocked) and dc-unlocker without luck. In both cases pass the flash but phone still not boot, only erecovery. I can get twrp works now following this guide: https://forum.xda-developers.com/hu...covery-twrp-3-2-1-0-p20-lite-edition-t3800692 but i dont have backups because i do a factory reset and the internal storage is empty. What can i do in twrp? I flash the correctly firmware for my phone ANE-LX3 8.0.0.104(C605), with this file ANE-LX3C605B130 (8.0.0.130) from here: http://pro-teammt.ru/firmware-database/?firmware_model=ANE-LX3&firmware_page=0 . Any other suggestion?
Edit: I can solve my problem. When I connect my phone in fastboot mode to dc-unlocker it give me an info:
Found Phone : ANE-LX3
Model : Huawei phone in fastboot mode
IMEI : 867903xxxxxxxxxxxx
Serial NR. : KPS7N18xxxxxxxxx
Firmware : ANE-LX3 8.0.0.104(C605
IMEI1:867903032092188
MEID:00000000000000
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3829mv
and with the firmware info I download that version exactly (ANE-LX3 8.0.0.104(C605, found on easy-firmware web page, paid), flash with dc-phoenix, and i got it, the device boots again. Hope it help to anyone, thks. This thing cost me 28 usd, too expensive for unroot a device lol
alvavaca said:
I am in the same situation, can only boot to erecovery. I tried boot fastboot flash 4 files (because i have bootloader and frp unlocked) and dc-unlocker without luck. In both cases pass the flash but phone still not boot, only erecovery. I can get twrp works now following this guide: https://forum.xda-developers.com/hu...covery-twrp-3-2-1-0-p20-lite-edition-t3800692 but i dont have backups because i do a factory reset and the internal storage is empty. What can i do in twrp? I flash the correctly firmware for my phone ANE-LX3 8.0.0.104(C605), with this file ANE-LX3C605B130 (8.0.0.130) from here: http://pro-teammt.ru/firmware-database/?firmware_model=ANE-LX3&firmware_page=0 . Any other suggestion?
Click to expand...
Click to collapse
This thread can help you a lot => HuRUpdater
kilroystyx said:
This thread can help you a lot => HuRUpdater
Click to expand...
Click to collapse
Thks for your help, I can solve my problem. When I connect my phone in fastboot mode to dc-unlocker it give me an info:
Found Phone : ANE-LX3
Model : Huawei phone in fastboot mode
IMEI : 867903xxxxxxxxxxxx
Serial NR. : KPS7N18xxxxxxxxx
Firmware : ANE-LX3 8.0.0.104(C605
IMEI1:867903032092188
MEID:00000000000000
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3829mv
and with the firmware info I download that version exactly (ANE-LX3 8.0.0.104(C605, found on easy-firmware web page, paid), flash with dc-phoenix, and i got it, the device boots again. Hope it help to anyone, thks. This thing cost me 28 usd, too expensive for unroot a device lol
---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------
Arseon said:
I tried flashing original firmware using DC-Pheonix. But phone is still in bootloop
Click to expand...
Click to collapse
In pretty sure you are flashing the wrong firmware, try to push your version with dc-unlocker in fastboot and download the excatly matching firmware. Good luck
well, i have all of this+one more tougher stuff..
Well, I tried to install a custom ROM on my P20 Lite (ane-lx1) via TWRP aand when I failed I ended up into a bootloop, but the thing that got me a headache after a full day of forum research is that when I attempted to install the custom ROM the TWRP wanted a .img file, not a .zip file, so I rebooted after I alreday wiped out everything, I made a backup into the phone, BUT I cant access it because.. the TWRP freezes every time at the TeamWin logo.....the only thing that is accessible now its the fastboot&rescue mode and I'm out of juice and desperated...the bootloader is enabled...i think i preety much killed my phoen and my brain trying to get an android stock experience...i really have to get some sleep,well..thank you for your attention, if you have any suggestions that would pick me up from this mess I would be very greatfull, i'll see what i had left to do as soon as i'm able to...for now, have a good night/day/afternoon, whatever side of the world you're from
Edit:
I left the phone all night into bootloobing and after it got FULLY discharged, I dont know exactly how but the TWRP hasn't popped out, instead after this I was able to get into eRecovery and now it is downloading the 146(C432) version. I guess that I got lucky
I bricked my huawei mate 10. Please help. TIA
me 2
You have to give more information if you want us to provide a viable (if there are any) solution. What firmware were you on, what firmware were you trying to install?
i was trying to install xposed
bootloop
me too please help
I'd really appreciate your help
I have a Huawei Mate 10 on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
System 8.0.0.38(0310)
Product model:
ALP-L29
I tried installing Xposed Framework ... after installation got in a bootloop
eRecovery doesn't work
I don't have TWRP
can only enter fastboot
the device has an SD card slot but I'm confused because some say upgrading or formatting it works and some say it doesn't .
I just want the device to boot ... I don't care about the data
please kindly help
thanks in advance
hero3210 said:
me too please help
I'd really appreciate your help
I have a Huawei Mate 10 on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Current build number:
System 8.0.0.38(0310)
Product model:
ALP-L29
I tried installing Xposed Framework ... after installation got in a bootloop
eRecovery doesn't work
I don't have TWRP
can only enter fastboot
the device has an SD card slot but I'm confused because some say upgrading or formatting it works and some say it doesn't .
I just want the device to boot ... I don't care about the data
please kindly help
thanks in advance
Click to expand...
Click to collapse
More info:
fastboot oem get-product-model
...
(bootloader) ALP-L29
fastboot getvar vendorcountry
vendorcountry: hw/meafnaf
fastboot oem get-build-number
...
(bootloader) :System 8.0.0.38(0310)
fastboot getvar rescue_enter_recovery
getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
fastboot oem oeminforead-SYSTEM_VERSION
...
(bootloader) :ALP-L29 8.0.0.128(C185)
please inform me of how to flash update.zip because I get an error
or place in in SD card because UPDATE.APP is more than 4GB ..
I think for the experienced, my problems are fairly easy to fix so please help ... I appreciate any suggestion. Thank you.
royhanks3 said:
You have to give more information if you want us to provide a viable (if there are any) solution. What firmware were you on, what firmware were you trying to install?
Click to expand...
Click to collapse
ALP-L29 bootloader unlocked.
Rooted
I am just struck in bootloop.
Erecovery doest help. I have the firmware(update.app) just tell me how to flash the stock rom i.e (update.app)
Thanks in advance.
Please help
Karthik1898 said:
ALP-L29 bootloader unlocked.
Rooted
I am just struck in bootloop.
Erecovery doest help. I have the firmware(update.app) just tell me how to flash the stock rom i.e (update.app)
Thanks in advance.
Please help
Click to expand...
Click to collapse
You need to unpack the update.app with Huawei Update Extractor and get the system.img.Then flash it with fastboot and check if it boots.
Pretoriano80 said:
You need to unpack the update.app with Huawei Update Extractor and get the system.img.Then flash it with fastboot and check if it boots.
Click to expand...
Click to collapse
How can this be done?
Tumpster said:
How can this be done?
Click to expand...
Click to collapse
I've just told you in my previous post, lol.
Use this guide - > https://forum.xda-developers.com/mate-10/how-to/guide-extracting-stock-firmware-files-t3756733 <- to extract the system.img and then flash the image with this command : fastboot flash system system.img
Then reboot the with "fastboot reboot" command and hope that your system boots.
I bricked my Huawei Mate 10 too
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
As i know you cannot downgrade from pie to oreo try to flash back the pie files as u did before with HWOTA8 and see if the devise boot
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
Flash back stock pie kernel. Hwota flashes recovery and kernel (and ramdisk which fails because there is no ramdisk partition in pie). If kernel doesn't work because its corrupt or wrong (pie kernel is 4.9 while Oreo use 4.4) your device can't boot recovery or boot to system.
You can downgrade using TWRP but you'd have to do it manually.
Antidote03 said:
As i know you cannot downgrade from pie to oreo try to flash back the pie files as u did before with HWOTA8 and see if the devise boot
Click to expand...
Click to collapse
Thanks for the suggestion. I tried flashing back the pie files using HWOTA8 but the software requires you to boot to recovery in order for the installation to continue but the device won't boot to recovery, it's just stuck on device is booting now screen.
---------- Post added at 11:42 AM ---------- Previous post was at 11:39 AM ----------
ante0 said:
Flash back stock pie kernel. Hwota flashes recovery and kernel (and ramdisk which fails because there is no ramdisk partition in pie). If kernel doesn't work because its corrupt or wrong (pie kernel is 4.9 while Oreo use 4.4) your device can't boot recovery or boot to system.
You can downgrade using TWRP but you'd have to do it manually.
Click to expand...
Click to collapse
Thanks for the explanation. At least I have an idea now what caused the issue . If it's fine do you have the steps or link which provides steps how to downgrade using TWRP?
Carnage! said:
Thanks for the explanation. At least I have an idea now what caused the issue . If it's fine do you have the steps or link which provides steps how to downgrade using TWRP?
Click to expand...
Click to collapse
Look here - > https://forum.xda-developers.com/mate-10/how-to/how-people-bricked-phone-rebranding-ota-t3797555 <- use the Huawei Update Extractor tool to get the image files than flash with fastboot.
kernel = fastboot flash kernel kernel.img
system = fastboot flash system system.img
recovery = fastboot flash recovery_ramdisk recovery.img
Obviously, replace image name with the ones you are using.
For downgrading, download this tool - > https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA <- unpack it on your PC, launch Flash.bat and follow the On Screen instructions .
Now you got it why you shouldn't spam threads? You get answers all over the forum, which is not nice.
Pretoriano80 said:
Look here - > https://forum.xda-developers.com/mate-10/how-to/how-people-bricked-phone-rebranding-ota-t3797555 <- use the Huawei Update Extractor tool to get the image files than flash with fastboot.
kernel = fastboot flash kernel kernel.img
system = fastboot flash system system.img
recovery = fastboot flash recovery_ramdisk recovery.img
Obviously, replace image name with the ones you are using.
For downgrading, download this tool - > https://mega.nz/#!oxkQWApD!-PtLtrekX3DS-iglnr7xpdB1285dF1nZSiOSHyZsqKA <- unpack it on your PC, launch Flash.bat and follow the On Screen instructions .
Now you got it why you shouldn't spam threads? You get answers all over the forum, which is not nice.
Click to expand...
Click to collapse
Thanks for the steps. I will try it later and will let you know. I really apologize for spamming since I panicked and I don't know where to get help. I will continue and reply to this thread only moving forward.
Carnage! said:
Thanks for the steps. I will try it later and will let you know. I really apologize for spamming since I panicked and I don't know where to get help. I will continue and reply to this thread only moving forward.
Click to expand...
Click to collapse
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
@Pretoriano80
Thx this has Fixed my Phone
In Huawei Service Center they are not able to fix the Firmwarefail *rofl*
ante0 said:
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
Click to expand...
Click to collapse
I think he already flashed system once! ?
ante0 said:
I would start with just flashing kernel. Flashing system can disable Oem unlock, which will result in frp lock in fastboot.
Click to expand...
Click to collapse
Got it. Thanks again for all the help!
hi there.
soooo I kinda bricked my mate 10 lite (RNE-L21C432)
bootloader is unlocked, rooted.
I tried flashing a flashable rom and got a bootloop...sooooo
I downloaded the firmware via huawei firmware finder , the oreo one.
I opened the UPDATE.APP via huawei update extractor, there are alot of files, so can you please tell me what files I need to extract and flash to unbrick my phone?
I extracted system, kernel, vendor and odm for now, system flashed fine. but I cant flash kernel it gives me the error FAILED: remote: command not allowed
can you pleaste help me?
Edit: I can flash system, I did flash kernel, I can flash recovery too, but when I try to flash anything else, it gives me that error
Edit2: can someone tell me which files do I need to extract via huawei update extractor to flash? I know that system.img is one of them
konopla4 said:
hi there.
soooo I kinda bricked my mate 10 lite (RNE-L21C432)
bootloader is unlocked, rooted.
I tried flashing a flashable rom and got a bootloop...sooooo
I downloaded the firmware via huawei firmware finder , the oreo one.
I opened the UPDATE.APP via huawei update extractor, there are alot of files, so can you please tell me what files I need to extract and flash to unbrick my phone?
I extracted system, kernel, vendor and odm for now, system flashed fine. but I cant flash kernel it gives me the error FAILED: remote: command not allowed
can you pleaste help me?
Click to expand...
Click to collapse
Check if you're still FRP unlock in Fastboot.
ante0 said:
Check if you're still FRP unlock in Fastboot.
Click to expand...
Click to collapse
Both bootloader and from are unlocked
konopla4 said:
Both bootloader and from are unlocked
Click to expand...
Click to collapse
Ah, didn't see your edit.
Fastboot is limited in flashing, you can't flash everything.
From memory I think it is:
System, vendor, recovery_ramdisk, recovery_vendor, recovery_vbmeta, ramdisk, kernel, cache, userdata
You could use HWOTA for Mate 10 Lite if you can get into stock recovery, as it will flash the full update.app rather than the limited partitions fastboot can flash.
https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
ante0 said:
Ah, didn't see your edit.
Fastboot is limited in flashing, you can't flash everything.
From memory I think it is:
System, vendor, recovery_ramdisk, recovery_vendor, recovery_vbmeta, ramdisk, kernel, cache, userdata
Click to expand...
Click to collapse
So I can flash all of these without getting the error and it'll will restore my system?
I remember on p8 lite I needed to flash only system, boot, and cust. To restore the system. It was much easier.
konopla4 said:
So I can flash all of these without getting the error and it'll will restore my system?
I remember on p8 lite I needed to flash only system, boot, and cust. To restore the system. It was much easier.
Click to expand...
Click to collapse
Edited while you posted, use HWOTA if you can get into stock recovery
https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
ante0 said:
Edited while you posted, use HWOTA if you can get into stock recovery
https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
Click to expand...
Click to collapse
Yeah, just noticed.
So hwota. I don't have the "stock recovery" I can only flash the recovery that I extract from update.app
The one I flash is bugged for some reason, probably because it's from a slightly different system than the one I had.
konopla4 said:
Yeah, just noticed.
So hwota. I don't have the "stock recovery" I can only flash the recovery that I extract from update.app
The one I flash is bugged for some reason, probably because it's from a slightly different system than the one I had.
Click to expand...
Click to collapse
If it can be booted into it should work. HWOTA will replace it anyway with a no-check recovery. Or you could use TWRP by Caucava21 and use HuRUpdater (https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279) to update from TWRP.
Either way will work.
ante0 said:
If it can be booted into it should work. HWOTA will replace it anyway with a no-check recovery. Or you could use TWRP by Caucava21 and use HuRUpdater (https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279) to update from TWRP.
Either way will work.
Click to expand...
Click to collapse
Waaaait it, I can update from TWRP?
Or is it a specialized one?
konopla4 said:
Waaaait it, I can update from TWRP?
Or is it a specialized one?
Click to expand...
Click to collapse
It's a script, but it needs a TWRP that's compatible. The one by Catuva21 is (or so I've heard).
Mate 10. So, I tried to install the latest EMUI version using HuRUpdater - bad idea. Now, my phone will not boot. I can enter EMUI Recovery Mode but when I try to receive download package, it says it can't be retrieved. I can also enter Fastboot Mode but the problem with that is that under Device Manager, it only gets recognized as, "Android Bootloader Interface."
Please, any help would be greatly appreciated.
edit: So, fastboot DOES work. What files from what version do I flash to return to stock recovery? I don't even know if Pie was actually written to the device or not before the device rebooted and wouldn't boot.
edit again: I have just successfully installed TWRP via fastboot but it hangs at startup screen - is this because it's not compatible with Pi?
So I've tried flashing ramdisk_recovery.img, kernel.img and system.img from the Pi version but I still can't factory reset the phone. It boots back to the white screen with the android dude and says, "Please update system again."
Any help would be appreciated...
Using Multi-Tool, it detects my device in Fastboot mode as still 8.0.0.143. So, I'm trying to flash System, Ramdisk, Cust, Recovery_Ramdisk and Userdata......all succeed, except one - Ramdisk.img. When I manually try to flash Ramdisk.img in command prompt, it also fails, "FAILED (remote: partition length get error)". In Multi-tool, the error is, "the size or path does not match the file system markup."
Please, does anyone have any other suggestions? I've been at this for nearly 12 hours straight.
I assume u have unlocked bootloader and frb unlocked too if both yes u can search in xda for zip file beta downy 0.4
It will help you to downgrade emui 9 to. Emui 8
If u have unlocked bootloader only I guess u need funky huawei to restore ur devise
I hope I did helped u
Thanks for the reply.
My bootloader is unlocked but how do I know if I have unlocked FRP?
And downy tool requires ADB but I can only access Fastboot.
edit: I just checked and my FRP is also unlocked. What now?
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
essen212 said:
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
Click to expand...
Click to collapse
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Pretoriano80 said:
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Click to expand...
Click to collapse
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
essen212 said:
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
Click to expand...
Click to collapse
Try with EMUI 9 first, then, if it fails, try Oreo. The most important part is finding a DLOAD firmware for your cust/region.
I've fixed it!
Funky emailed me back and I ended up using a different method on their site which worked like a charm. I couldn't recommend them enough.
Hi, good to hear you got it sorted! Would you mind sharing the details on what you had to do differently with FHC? I'm in the same boat here with a mate 10 pro that died on emui9 and I'm not sure if I should go the FHC way or not...
Thx - David
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Amajed said:
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Click to expand...
Click to collapse
You should try the DLOAD method, but you must know the cust (c432, c636, etc.) too, not only the model (in your case BLA-L29).
Pretoriano80 said:
You should try the DLOAD method, but you must know the cust (c432, c636, etc.) too, not only the model (in your case BLA-L29).
Click to expand...
Click to collapse
Is there a way to know that? the phone isn't working :/
Thanks
Amajed said:
Is there a way to know that? the phone isn't working :/
Thanks
Click to expand...
Click to collapse
Try with this fastboot command : fastboot oem get-build-number
Or check on the box. You could also try checking with IMEI/SN on Huawei's website.
Pretoriano80 said:
Try with this fastboot command : fastboot oem get-build-number
Or check on the box. You could also try checking with IMEI/SN on Huawei's website.
Click to expand...
Click to collapse
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
EDIT:
I checked mine, it says BLA-L29 8.0.0.129(C185)
using fastboot oem get-build-number
Amajed said:
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
Click to expand...
Click to collapse
You can use an OTG cable with an USB stick, Memory Card reader, etc.
Pretoriano80 said:
You can use an OTG cable with an USB stick, Memory Card reader, etc.
Click to expand...
Click to collapse
Good, I'm downloading BLA-L29 8.0.0.129(C185) update.zip file, I'll extract it and copy the UPDATE.APP file to a folder named dload in the root of a memory stick, plug it in a USB Type C to USB Type A
then turning on the phone by pressing volume up + volume down + power button until Huawei logo appears.
and that's it, hopefully everything goes well.
Thanks
Amajed said:
Thanks I'll check that, right now I looked up the dload method, it seems that it uses a SD Card, my Phone does not have a SD Card slot, will I be able to use dload even still?
Thanks
EDIT:
I checked mine, it says BLA-L29 8.0.0.129(C185)
using fastboot oem get-build-number
Click to expand...
Click to collapse
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Amajed said:
Good, I'm downloading BLA-L29 8.0.0.129(C185) update.zip file, I'll extract it and copy the UPDATE.APP file to a folder named dload in the root of a memory stick, plug it in a USB Type C to USB Type A
then turning on the phone by pressing volume up + volume down + power button until Huawei logo appears.
and that's it, hopefully everything goes well.
Thanks
Click to expand...
Click to collapse
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Amajed said:
Hi guys, long time ago, I bricked my phone (hard brick i think)
I was trying to install exposed or root, not sure what I was doing back then,
then the phone always in loop when I try to run it, there's only two thing that I can access to, eRecover (useless) and fastboot.
all I know about my phone is BLA-L29
I tried to download and use fastboot to flash system.img, I did that, but nothing happen.
I'm so bad at this, I have no idea what I'm doing, I searched a lot, but apparently I'm stuck.... help me out please. thanks
Click to expand...
Click to collapse
Hi, it almost happened to me, I made him rebrand in his time and now I was going to update it and I was brickened I tried to put the cust and I deleted the IMEI and now it appears as Huawei p20 pro mate 10, In other words, it has two firmwares and I tried everything, I put the update I put other cust and nothing when it starts because it restarts, and the dead is no way to revive it [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Pretoriano80 said:
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Click to expand...
Click to collapse
Thanks, I'm downloading yours as we speak,
I've downloaded this one:
http://huawei-update.com/firmware/6343/huawei-mate-10-pro/bla-l29
but after I tried the combination, I got massage says "Software Install failed"
is it because of my copy? or was it something else?
Pretoriano80 said:
Probably this firmware will work for you - > https://androidhost.ru/7oq <- read the instructions inside the firmware. You will also found infos about DLOAD here on Mate 10 forums.
Just drag the "dload" folder into the root of otg storage, then proceed with the buttons combo.
Better to format the usb storage as exFAT
Click to expand...
Click to collapse
I just downloaded your file, I dragged and dropped the dload folder into a formatted USB stick (exFAT) but still, gives me the following error: (Software Install Failed)
maybe worth mentioning, I did (a year ago) install TWRP then I uninstalled it, does this have to do with anything?
Amajed said:
I just downloaded your file, I dragged and dropped the dload folder into a formatted USB stick (exFAT) but still, gives me the following error: (Software Install Failed)
maybe worth mentioning, I did (a year ago) install TWRP then I uninstalled it, does this have to do with anything?
Click to expand...
Click to collapse
Probably you have a "hibrid" firmware, what version did you tried to flash with fastboot?
Pretoriano80 said:
Probably you have a "hibrid" firmware, what version did you tried to flash with fastboot?
Click to expand...
Click to collapse
You mean a year ago? I don't really remember, but if you mean now, I tried this post:
https://forum.xda-developers.com/showpost.php?p=76060051&postcount=10
it doesn't say which version
and for some reason my phone is unrecognized when I enter Fastboot. I tried multiple drivers, but I always end up with usb not recognized by windows
Amajed said:
You mean a year ago? I don't really remember, but if you mean now, I tried this post:
https://forum.xda-developers.com/showpost.php?p=76060051&postcount=10
it doesn't say which version
Click to expand...
Click to collapse
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Click to expand...
Click to collapse
Will do that as soon as I figure out why my phone is not recognized by windows, it was working before, now no matter what drivers I install, it keep saying my USB in not recognized .....
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Click to expand...
Click to collapse
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
You are hijacking this thread, please open a new thread for your problem exactly, so we can avoid confusion.
Pretoriano80 said:
Try this :
1) Download BLA-L29 C185 8.0.0.129 firmware from Firmware Finder
2)Extract system, kernel and recovery_ramdisk from update.app
3)Flash the extracted images with fastboot
4) Try again with the DLOAD method
P. S. You could also try to do a Factory Reset before step 4.
Edit: Windows 10 might require a fix for the drivers, iirc. Otherwise you could try a Linux Live setup (you can find one on XDA, especially designed for ADB and Fastboot use).
Click to expand...
Click to collapse
I have two problems now :/
Extracting system.img takes for ever, as I'm writing now, it's still extracting, even tho the bar is full.
the second problem is, I couldn't find "recovery_ramdisk"
there is "RECOVERY_RAMDIS.img" and there is "RAMDISK.img"
which one is it?
Sergiocubano1 said:
Any way I can recover the IMEI, or reinstall everything and it appears as mate 10? [emoji21][emoji17]
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
So I flashed 4 files:
fastboot flash system SYSTEM.img
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
using the Live Linux you mentioned.
Now I'll go back to the dload and see if it works
Amajed said:
So I flashed 4 files:
system.img
ramdisk.img
kernel.img
recovery_ramdis.img
using the Live Linux you mentioned.
Now I'll go back to the dload and see if it works
Click to expand...
Click to collapse
Yes, i forgot that emui8 has the ramdisk too, so flash that too.
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img