Since there is not a single product page on the tanix webpage and I've came across multiple people who bricked their Tanix TX3 box.
I decided to search for the original firmware and share it on xda for others who might need it.
The link to the firmware:
https://mega.nz/#F!fiwUzSBa!guAnqiKRhhp3fAWcgwmbXQ
Does anyone have TWRP recovery.img for this tanix box?
I've found a twrp flashable zip but it's some sort of liveboot.
I've succesfuly recovered my bricked Tanix TX3 with the USB burning tool.
You need a usb to usb cable, I used my phones usb cable -> usb to usb C cable and my computer had a USB C input/output on the back so that worked for me.
Put the twrp on sd card and rename it to recovery.img
Boot your device with reset button pushed and you will boot twrp without messed up with your original recovery
تم الإرسال من HMA-L29 باستخدام Tapatalk
mmmnnn111 said:
Put the twrp on sd card and rename it to recovery.img
Boot your device with reset button pushed and you will boot twrp without messed up with your original recovery
تم الإرسال من HMA-L29 باستخدام Tapatalk
Click to expand...
Click to collapse
It's a zip file I haven't found a recovery.img for the device.
The TWRP in the zip boots twrp when you install it from recovery but it doesnt replace the stock recovery, so can't use magisk.
Hello.did anyone managed to find a working twrp?i just want yo unroot and then root with magisk.please help me.
Try this folder
https://mega.nz/#F!8qhRRaYJ!2ZA3VLjvLT6wg0IwsTF27g
تم الإرسال من HMA-L29 باستخدام Tapatalk
Unfortunately there isn't ?
What do you do ?... You must take every recovery.img put in usb stick
And boot to it by pressing the reset button and power the device untill it start from the recovery file and test
تم الإرسال من HMA-L29 باستخدام Tapatalk
mmmnnn111 said:
What do you do ?... You must take every recovery.img put in usb stick
And boot to it by pressing the reset button and power the device untill it start from the recovery file and test
تم الإرسال من HMA-L29 باستخدام Tapatalk
Click to expand...
Click to collapse
Inside folder there isn't any twrp recovery for tanix tx3..
https://unofficialtwrp.com/tanix-tx3-mini-root-twrp/
تم الإرسال من HMA-L29 باستخدام Tapatalk
Thanks but i try to find for latest tx3 model.No mini or max!
Have anyone get twrp for 905x3
Anyone tried flashing the attached TWRP using flashfire?
Tahsin88 said:
Since there is not a single product page on the tanix webpage and I've came across multiple people who bricked their Tanix TX3 box.
I decided to search for the original firmware and share it on xda for others who might need it.
The link to the firmware:
https://mega.nz/#F!fiwUzSBa!guAnqiKRhhp3fAWcgwmbXQ
Does anyone have TWRP recovery.img for this tanix box?
I've found a twrp flashable zip but it's some sort of liveboot.
I've succesfuly recovered my bricked Tanix TX3 with the USB burning tool.
You need a usb to usb cable, I used my phones usb cable -> usb to usb C cable and my computer had a USB C input/output on the back so that worked for me.
Click to expand...
Click to collapse
How do you use the TWRP zip file to get into the live boot mode? I need to do a backup before I try something. Somehow my box is unrooted by the seller and he is asking me to ship it back to him because i needed a rooted version. I want to do a TWRP backup before trying anything on this box. If it works, saves the hassle of me shipping it to the seller.
Kaatrea said:
How do you use the TWRP zip file to get into the live boot mode? I need to do a backup before I try something. Somehow my box is unrooted by the seller and he is asking me to ship it back to him because i needed a rooted version. I want to do a TWRP backup before trying anything on this box. If it works, saves the hassle of me shipping it to the seller.
Click to expand...
Click to collapse
I recently got a T95max+ box and I was surprised by the lack of custom roms, root and TWRP as it seems to be a popular box.
What I've found out so far is that you can get temporary TWRP using the TWRP_3.2.2_Android_9.0.zip file, md5 checksum d11de08801edb33c716ee1688ce1c330 *TWRP_3.2.2_Android_9.0.zip.
What you need: FAT32 formatted sd card/usb stick, usb mouse to navigate TWRP
To use the zip:
- put it on a FAT32 formatted sdcard or USB stick, no need to rename the zip file
- unplug the power to your box
- insert the sd card/usb stick into your box
- stick a toothpick in the AV out until you hear a button click and keep it pressed
- connect the power and remove the toothpick when you see the boot logo
- You are now in the stock recovery menu
- Select update from ext and then USB or SD
- Select your twrp zip file which is most likely named TWRP_3.2.2_Android_9.0.zip
The box will now boot to your temporary TWRP. You can make a backup now but flashing magisk doesn't seem to work. Infact even backing up to the internal drive doesn't seem to stick so make the backup to sd or usb.
I just recently did this myself, now that I have a backup I can test some other roms that may or may not work. AMLogicTools_V6.0.0 seems to be a good/the best tool to experiment with.
Some keywords as info for this box is partially difficult to find because of the name: t95maxplus, t95max+, t95 max plus, t95 max +, t95 max+,
Check this
https://youtu.be/sjZkJeD8-Jg
Or more check this
https://forum.freaktab.com/forum/tv...ls-ds/800255-req-tanix-tx3-s905x-atv-firmware
Hi.
I bought a Tanix TX6s and am thinking of buying a Tanix TX3 (s905x3).
TX6s came with Alice UX v.20.03.20.
Please, what version of Alice UX from TX3 (s905x3)?
Thankful.
Hello, is there any unrooted firmware for tx3?
I found a working twrp image !
I found a working TWRP image that you can put on a microSD card and boot the TX3 of by depressing the pinhole button while inserting the power cord. You can download it through https://eu.dl.twrp.me/u212/twrp-3.4.0-0-u212.img
Hi I have tx3 s905x3 and i was able to install slimbox 11.6 and everything is OK but after boot launcher crash for 10-20 seconds then come back or I am unable to install apps and some apps when open crash and also box reboot. And even if I burn original firmware or any other firmware with UBT its the same thing. I put slimbox on many boxes before and never happen before except for a tx3 mini 1.6 not long time ago had exactly the same problem after burning slimbox. Launcher or apps crash and when i burn original firmware or any other with UBT after the problem still there.
Anyone had this problem before? I don't think its something with slimbox cause I use it for many boxes and always great rom except for these 2 boxes.
I think maybe something mess up with partition or something that cant be fix by only burning other firmware
Really need help
Thanks
Jay
Related
Hi everyone !
first of all, sorry for my poor english.
i'd just rooted my plk-l01 using fastboot tool, and some weeks after, I did a REALLY stupid thing, after putting my simcard, i tried to install the 5.1.x update.
Of course it didn't worked. My phone just boot on twrp recovery, and a guy told me that wipe the phone would work. Bastard. Now I just have my twrp, alone.
I found this tutorial -> http://forum.xda-developers.com/hon...ers-how-to-root-update-fix-t3255452?nocache=1 (in the bootloop fixing section)
I've download the extractor and update, but I have two things that doesn't match. first, in the UPDATE.APP file, I don't have boot.img and stuff but CRC.img, CURVER.img...
And the WTF part comes when I plug my phone to my computer. It detects my phone storage (terribly empty) and my sd card, but the name of my phone is now GEM-703L, an other Huawei phone.
What can I do ?? I don't wanna touch anything without being sure I won't transform my phone onto a 299$ paperweight, and I really hope fixing is possible.
Thanks a lot for your future answers, and sorry if someone had the same trouble, but I didn't find anything which could help me on XDA.
Idiocrate said:
And the WTF part comes when I plug my phone to my computer. It detects my phone storage (terribly empty) and my sd card, but the name of my phone is now GEM-703L, an other Huawei phone.
Click to expand...
Click to collapse
That's the mediapad X2, it's what the Chinese TWRP is actually for...
Go [here] to grab the stock recovery of your choice (B100 or B120)
Go [here] and download B100 or B120 FULL
Unzip and copy the UPDATE.APP to your sdcard in directory called "dload"
Flash stock recovery
Turn phone on holding power, vol+ and vol-
Wait until finished.....
Relax :silly:
i have le 1s eco and today i wiped system data and all other things.... then it shows me no os found......after that i tried whole day........all mathod tried then at last i tried usb otg in twrp recovery and then i selected otg memory and agin menu comes asked internal or otg then again i selected otg memory to mount and after selecting otg it goes black.....i think i have choose os on otg so now no recovery no fastboot mode no logo nothing comes only red light when charge lit please help me is there any way......and now will sc guys can do it or they also cant
scorpianj50 said:
i have le 1s eco and today i wiped system data and all other things.... then it shows me no os found......after that i tried whole day........all mathod tried then at last i tried usb otg in twrp recovery and then i selected otg memory and agin menu comes asked internal or otg then again i selected otg memory to mount and after selecting otg it goes black.....i think i have choose os on otg so now no recovery no fastboot mode no logo nothing comes only red light when charge lit please help me is there any way......and now will sc guys can do it or they also cant
Click to expand...
Click to collapse
someone please reply to me
No os found means that you wiped your partitions like data,system. A simple nandroid restore will do
Devmountsu77 said:
No os found means that you wiped your partitions like data,system. A simple nandroid restore will do
Click to expand...
Click to collapse
i have tried all adb push sideload all and last i made a big mistake i want to install through otg and then i selected otg memory in twrp and then all went black not even starting mobile now and no fastboot no recovery menu opening
scorpianj50 said:
i have tried all adb push sideload all and last i made a big mistake i want to install through otg and then i selected otg memory in twrp and then all went black not even starting mobile now and no fastboot no recovery menu opening
Click to expand...
Click to collapse
You need to flash stock ROM with odin
Devmountsu77 said:
You need to flash stock ROM with odin
Click to expand...
Click to collapse
but my phone is not detecting by pc because it is not getting on
Which partitions did you wipe? If you wiped the wrong ones you hard bricked your phone
Devmountsu77 said:
Which partitions did you wipe? If you wiped the wrong ones you hard bricked your phone
Click to expand...
Click to collapse
i have wiped all stuff which available in twrp system data and cache delvik cache etc
It your USB flash drive,if the screen goes black the flash drive has problems. Do you have another flash drive by any chance? I know you said the PC isn't detecting the phone but try putting it in recovery mode again and mounting all the partition and see if your flash drives work. If you have no success unfortunately you have a hard bricked device
Devmountsu77 said:
It your USB flash drive,if the screen goes black the flash drive has problems. Do you have another flash drive by any chance? I know you said the PC isn't detecting the phone but try putting it in recovery mode again and mounting all the partition and see if your flash drives work. If you have no success unfortunately you have a hard bricked device
Click to expand...
Click to collapse
yes i have hard bricked it is there any way to get rid of it......
It could be possible just a bit hard,let me do some research on this phone and then I'll tell you how to unbrick
Devmountsu77 said:
It your USB flash drive,if the screen goes black the flash drive has problems. Do you have another flash drive by any chance? I know you said the PC isn't detecting the phone but try putting it in recovery mode again and mounting all the partition and see if your flash drives work. If you have no success unfortunately you have a hard bricked device
Click to expand...
Click to collapse
after spending lots of time it gets in fastboot mode and recovery but in recovery everytime it shows md5 error or zip verification failed tried 3-4 roms......and
Devmountsu77 said:
It could be possible just a bit hard,let me do some research on this phone and then I'll tell you how to unbrick
Click to expand...
Click to collapse
and via fastboot mode how to flash zip file fastboot only flash img file how to get rom in img format
Hi,
I bought a cheap A95x China tv boxes. I was editing build.prop to get leanback launcher and android TV features.
I was trying to flash stock ROM but it always failed and the box ended up bricked. So I took working box and made a TWRP backup.
Then I restored this backup on bricked one. I was able to boot again but only with SD card inserted.
This box should boot when you plug it to power, but nothing happens when I connect it. Inserting microSD card will trigger the boot.
Any suggestions what might go wrong? I was also trying to flash TWRP but it didn't help
Can reflashing boot.img help? I couldn't find suchn img
You can find the files you need here...
ErikHric said:
Hi,
I bought a cheap A95x China tv boxes. I was editing build.prop to get leanback launcher and android TV features.
I was trying to flash stock ROM but it always failed and the box ended up bricked. So I took working box and made a TWRP backup.
Then I restored this backup on bricked one. I was able to boot again but only with SD card inserted.
This box should boot when you plug it to power, but nothing happens when I connect it. Inserting microSD card will trigger the boot.
Any suggestions what might go wrong? I was also trying to flash TWRP but it didn't help
Can reflashing boot.img help? I couldn't find suchn img
Click to expand...
Click to collapse
Friz's Nexbox File Repository:
https:// mega.nz/ #F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ[/url]
Hi guys, trying to fix a colleagues t95z, when you boot up, it goes through the t95z logo then the loader screen then just black screen
I've tried to pin hole and update rom
tried a-a usb cable pc can't detect
I mananged to put twrp 3.0.2.0 on but basically useless i think, when i click reboot into recovery it says "no Os"
any ideas? its the 2gb/16gb version
conqug said:
Hi guys, trying to fix a colleagues t95z, when you boot up, it goes through the t95z logo then the loader screen then just black screen
I've tried to pin hole and update rom
tried a-a usb cable pc can't detect
I mananged to put twrp 3.0.2.0 on but basically useless i think, when i click reboot into recovery it says "no Os"
any ideas? its the 2gb/16gb version
Click to expand...
Click to collapse
Why don't you just install the stock firmware via USB stick or TWRP?
https://forum.freaktab.com/forum/tv...o-2gb-16gb-scv1-final-rom?p=634945#post634945
Post #335
The ROM is for the T95z+. No idea if it's compatible with the T95z
I can't get into recovery mode to flash. I'm stuck on t95z plus screen. Can't access twrp anymore either.?
conqug said:
I can't get into recovery mode to flash. I'm stuck on t95z plus screen. Can't access twrp anymore either.?
Click to expand...
Click to collapse
So how did you manage to flash twrp and is it the correct version for the device?
i managed to install this
https://forum.xda-developers.com/an...ecovery-twrp-3-0-2-sunvell-t95z-plus-t3557812
was able to see twrp a couple times couldn't do much, went to reboot clicked recovery popped up at top saying "no OS" then rebooted and its sat on t95z plus boot logo since, can't get back to twrp or any recovery
conqug said:
i managed to install this
https://forum.xda-developers.com/an...ecovery-twrp-3-0-2-sunvell-t95z-plus-t3557812
Click to expand...
Click to collapse
That is what led me to build my own in the link I gave you, it added support for image backup and flashing.
If twrp is giving the 'No OS' message it means that you've wiped the system partition.
If you indeed have the T95 plus and running MM then flashing the image I posted should fix it.
However I'm a little confused as to why you can't boot to twrp as this not affected in any way by having no OS installed. Irrespective of whether it's stuck on the T95z plus screen you should still be able to hard boot to recovery.
Have you tried to see if ADB is active at this point?
Hi
How do I see if adb active?
I've tried USB a to a with no detection. I don't know if box gets a network connection
I will try flashing with that rom again with a different USB or sd card
If I try pin hole method on boot box goes to t95z + screen flickers to a grey then goes to t95z logo again
conqug said:
If I try pin hole method on boot box goes to t95z + screen flickers to a grey then goes to t95z logo again
Click to expand...
Click to collapse
Is adb working?
Hi need to try Monday. Left my cable at work
How do I know if adb work?
conqug said:
Hi need to try Monday. Left my cable at work
How do I know if adb work?
Click to expand...
Click to collapse
Boot the phone then plug the cable in then at a command prompt where you have the adb binary stored type the following:
adb devices
You should get some sort of confirmation with a serial number.
ashyx said:
Boot the phone then plug the cable in then at a command prompt where you have the adb binary stored type the following:
adb devices
You should get some sort of confirmation with a serial number.
Click to expand...
Click to collapse
hi no can't get any connection to adb, just says list device attached and nothing there
tried to install twrp again but logo just flickers screen goes grey then logo appears again T95z plus
conqug said:
tried to install twrp again but logo just flickers screen goes grey then logo appears again T95z plus
Click to expand...
Click to collapse
How are you installing twrp?
If you can still install twrp then why not install the firmware from USB?
just via sdcard and pin hole method.
I can try via usb do i need to pin hole ?
do i just add SUPERCELERON_V1_FINAL_TWRP_SYSTEM_IMAGE to a usb or do i unzip? or use burn card maker etc
conqug said:
just via sdcard and pin hole method.
I can try via usb do i need to pin hole ?
do i just add SUPERCELERON_V1_FINAL_TWRP_SYSTEM_IMAGE to a usb or do i unzip? or use burn card maker etc
Click to expand...
Click to collapse
I suggest reading this thread and using these tools.
https://forum.xda-developers.com/an...ers/amlogic/opensource-amlogic-tools-t3786991
hi i've tried all of these tools but no joy
box sitting currently saying "boot" and logo on screen but nothing else..
think its unsaveable ( atleast by me )
conqug said:
hi i've tried all of these tools but no joy
box sitting currently saying "boot" and logo on screen but nothing else..
think its unsaveable ( atleast by me )
Click to expand...
Click to collapse
What actually happened to this box?
I'm led to believe that twrp installed. And he clicked wipe all etc and it deleted everything including os
I've tried 2 different USB cables to try get connection
conqug said:
I'm led to believe that twrp installed. And he clicked wipe all etc and it deleted everything including os
I've tried 2 different USB cables to try get connection
Click to expand...
Click to collapse
If that's the case then the device should be savable as its only a software issue.
If you can boot to twrp then it should be a relatively simple fix, so should using the USB stick method.
Are you actually installing twrp or just attempting to boot it from the sd card?
My box is on Magendanz's Nexus ATV rom. but thats 6.0 and I wanted to try 7.1 or 8.0 but it refuses to let me update any way I try.
I have tried the USB Flashing tool and ATVxperience rom but my box isn't being recognised as being in "burnable" state - the reset pin does work but its not recognising or putting into correct state for the USB tool to see it
I have tried Burn Card maker and ATVxperience rom but again it isn't recognising card or the "burnable" state
I have tried TWRP but my TWRP didnt allow me to flash the IMG saying "Size of image is larger than target device" - I think Magendanz's rom maybe didnt have all the right partitions or sizes? He's not responding to support requests
I tried to get original FW back using TWRP but same issues.
Tried to put a new TWRP on and buggered that up so now box thinks it has no recovery to boot to. BOX DOES BOOT and I can access terminal and root but when I tried dd if=/storage/recovery.img of=/dev/block/recovery it wrote a new TWRP but "reboot recovery" just gets me the Nexus logo.
I'd be tearing hair out if I had any left. I am guessing the partitions all need rebuilding and TWRP reinstalling but no ideas left.... Any help???