twrp cant boot
hi i fallowed the guide on this thread and it wont go in to twrp mode !
odid says the files are transferd with succes ! i have dev mode on etc
i tried difrent twrp files same thing
any help / smj320 fn/ iam using odin Odin3_v3.13.1 / twrp-3.3.1-0-j3lte.img/
auto reboot is off !
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 13 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
<ID:0/009> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
does not for me . And boot up phone holding Power Button, Home Button and Vol UP,
-Phone will not boot up in TWRP, it says android system recovery 3e etc etc
what am i doing wrong ,i tired difrent versions of twrp same thing
also get the message recevery is not seandroid enforcing
scroeffie84 said:
twrp cant boot
hi i fallowed the guide on this thread and it wont go in to twrp mode !
odid says the files are transferd with succes ! i have dev mode on etc
i tried difrent twrp files same thing
any help / smj320 fn/ iam using odin Odin3_v3.13.1 / twrp-3.3.1-0-j3lte.img/
auto reboot is off !
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 13 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
<ID:0/009> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
does not for me . And boot up phone holding Power Button, Home Button and Vol UP,
-Phone will not boot up in TWRP, it says android system recovery 3e etc etc
what am i doing wrong ,i tired difrent versions of twrp same thing
also get the message recevery is not seandroid enforcing
Click to expand...
Click to collapse
Have you tried the odin from highonandroid website? And have you tried the twrp from @faltisal lineageos 14? These 2 works for me.
Related
My phone is International version, rooted and using omega ROM for about an half year now and everything was fine until it suddenly restarted and stuck on the Samsung Galaxy S3 blackscreen, i tried to boot into recovery and reboot. After that, it still stuck on the blackscreen and i can't boot into recovery anymore. I also attempted to flash stock ROM via Odin and it failed. This is my Odin log:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How can i solve this problem ?
Update: I tried using the PIT file and it pass but the flashing stock rom doesn't. Now it appears with black screen and "Firmware update encountered an issue" instead of the boot screen, the odin always fail with flashing rom
looks like sds
Can anyone help me please ? I need my phone so bad
If there isnt any solution, where can i repair my phone in US because i bought it in country
in a service center
Hi,
I am trying to install a custom ROM on my phone. I have the i9300 version and I am following this guide:
http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744
I am using the version attached, even though it looks a little old. I have done nothing to the phone before this so it is a stock OS.
I have booted in to download mode and flashed using odin, Odin says everything went ok and does a restart:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/009> Added!!
After this I try to boot in to recovery mode and it is not the version I see on the video and there is no touch. The Rom I choose will then not install correctly. I guess that its not the clockwork mod, any idea on what I am doing wrong?
Thanks
-Howard
In the end of the guide there is:
"Stock Recovery being reflashed after a reboot?..."
May be You have stock recovery after reboot?
And have You tried Samsung toolkit? http://forum.xda-developers.com/galaxy-s3/orig-development/samsung-galaxy-s3-unified-toolkit-v8-0-t1703488
Hi,
Just tried that, same issue. It's like it can't get root. No errors thrown and odin seems happy and reports it's "passed"
Hey im trying to boot a custom recovery using Odin 3.09.
I've tried flashing twrp-2.8.6.1-i9300.tar and recovery-cwmtouch-6.0.3.2-GTI9300
but when I try to boot recovery I get the dead android screen. Everything seemed to go ok
No idea?
Please give us a hand
thanks
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
1. There are newer tar's here, but that won't help.
2. Are you able to boot into Downloadmode or System /ROM?
So i haven't rooted a phone in quite some time, And decided to root my Unlocked S6 Edge (SM-G925F). Downloaded ODIN, Latest version of TWRP for my device and model, Put phone in download mode, Opened odin on computer and connected my edge, Selected TWRP and hit start then it said FAILED.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Phone is stuck on blue error screen now "An error has occured while updating....."
Any idea how to fix ?
fml12345 said:
So i haven't rooted a phone in quite some time, And decided to root my Unlocked S6 Edge (SM-G925F). Downloaded ODIN, Latest version of TWRP for my device and model, Put phone in download mode, Opened odin on computer and connected my edge, Selected TWRP and hit start then it said FAILED.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Phone is stuck on blue error screen now "An error has occured while updating....."
Any idea how to fix ?
Click to expand...
Click to collapse
What version of twrp did you try to flash?
Try a different cable. Sometimes fail at __XmitData_write occurs with a non Samsung cable.
If not just restore with smart switch or flash stock firmware with Odin then it will be back on. Then try twrp again.
Hi My name is Henning and i am quite new to the world of rooting.
I have a samsung S9 + that i wish to install Noblerom 1.2 on, and to do that i have understand that you need a bootloader which if i am correct is the twrp.
But when i have downloaded Odio 3 V 3.14 and try to flash my phone i just get:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 45 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and here i am stuck:/
I have installed Samsung USB Driver on my PC and enabled OEM unlocking, i have spesifecly downloaded the if i am correct twrp-3.3.1-1.img.tar file but still i am stuck.
Anyone who has a clue what i can do?
All help is grately appriciated.
Regards Henning
Booze89 said:
Hi My name is Henning and i am quite new to the world of rooting.
I have a samsung S9 + that i wish to install Noblerom 1.2 on, and to do that i have understand that you need a bootloader which if i am correct is the twrp.
But when i have downloaded Odio 3 V 3.14 and try to flash my phone i just get:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 45 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and here i am stuck:/
I have installed Samsung USB Driver on my PC and enabled OEM unlocking, i have spesifecly downloaded the if i am correct twrp-3.3.1-1.img.tar file but still i am stuck.
Anyone who has a clue what i can do?
All help is grately appriciated.
Regards Henning
Click to expand...
Click to collapse
I'll try to help as failing with odin can be common.
To start with TWRP is a recovery file to replace stock recovery not a bootloader.
What is the model name ( ie: sm-g965f)?
How have you tried to install TWRP ( the steps taken ) or are you following a guide ( which one )?
Also if you can post a copy of your Download screen would help as well or at least the first 11 lines.
While you can use TWRP version 3.3.1-1 the latest version is 3.5.2_9-0. You can use TWRP website to download ( twrp.me )
Hmm i dont know it why it happend but suddenly it worked!
Thank you for your help anyway!
Regards Henning